From 898ee22c32bed56685552fd3352ef9bd6a68af1f Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 18 Apr 2022 18:10:21 -0700 Subject: [PATCH] Drop Documentation/ide/ Drop all Documentation/ide/ since IDE support was deleted by Christoph Hellwig , Jun 16 2021. Fixes: b7fb14d3ac63 ("ide: remove the legacy ide driver") Signed-off-by: Randy Dunlap Acked-by: Jens Axboe Acked-by: Damien Le Moal Reviewed-by: Christoph Hellwig Signed-off-by: Jonathan Corbet --- Documentation/ide/ChangeLog.ide-cd.1994-2004 | 268 ----------------------- Documentation/ide/ChangeLog.ide-floppy.1996-2002 | 63 ------ Documentation/ide/ChangeLog.ide-tape.1995-2002 | 257 ---------------------- Documentation/ide/changelogs.rst | 17 -- Documentation/ide/ide-tape.rst | 68 ------ Documentation/ide/ide.rst | 265 ---------------------- Documentation/ide/index.rst | 21 -- Documentation/ide/warm-plug-howto.rst | 18 -- Documentation/index.rst | 1 - 9 files changed, 978 deletions(-) delete mode 100644 Documentation/ide/ChangeLog.ide-cd.1994-2004 delete mode 100644 Documentation/ide/ChangeLog.ide-floppy.1996-2002 delete mode 100644 Documentation/ide/ChangeLog.ide-tape.1995-2002 delete mode 100644 Documentation/ide/changelogs.rst delete mode 100644 Documentation/ide/ide-tape.rst delete mode 100644 Documentation/ide/ide.rst delete mode 100644 Documentation/ide/index.rst delete mode 100644 Documentation/ide/warm-plug-howto.rst diff --git a/Documentation/ide/ChangeLog.ide-cd.1994-2004 b/Documentation/ide/ChangeLog.ide-cd.1994-2004 deleted file mode 100644 index 4cc3ad9..0000000 --- a/Documentation/ide/ChangeLog.ide-cd.1994-2004 +++ /dev/null @@ -1,268 +0,0 @@ -/* - * 1.00 Oct 31, 1994 -- Initial version. - * 1.01 Nov 2, 1994 -- Fixed problem with starting request in - * cdrom_check_status. - * 1.03 Nov 25, 1994 -- leaving unmask_intr[] as a user-setting (as for disks) - * (from mlord) -- minor changes to cdrom_setup() - * -- renamed ide_dev_s to ide_drive_t, enable irq on command - * 2.00 Nov 27, 1994 -- Generalize packet command interface; - * add audio ioctls. - * 2.01 Dec 3, 1994 -- Rework packet command interface to handle devices - * which send an interrupt when ready for a command. - * 2.02 Dec 11, 1994 -- Cache the TOC in the driver. - * Don't use SCMD_PLAYAUDIO_TI; it's not included - * in the current version of ATAPI. - * Try to use LBA instead of track or MSF addressing - * when possible. - * Don't wait for READY_STAT. - * 2.03 Jan 10, 1995 -- Rewrite block read routines to handle block sizes - * other than 2k and to move multiple sectors in a - * single transaction. - * 2.04 Apr 21, 1995 -- Add work-around for Creative Labs CD220E drives. - * Thanks to Nick Saw for - * help in figuring this out. Ditto for Acer and - * Aztech drives, which seem to have the same problem. - * 2.04b May 30, 1995 -- Fix to match changes in ide.c version 3.16 -ml - * 2.05 Jun 8, 1995 -- Don't attempt to retry after an illegal request - * or data protect error. - * Use HWIF and DEV_HWIF macros as in ide.c. - * Always try to do a request_sense after - * a failed command. - * Include an option to give textual descriptions - * of ATAPI errors. - * Fix a bug in handling the sector cache which - * showed up if the drive returned data in 512 byte - * blocks (like Pioneer drives). Thanks to - * Richard Hirst for diagnosing this. - * Properly supply the page number field in the - * MODE_SELECT command. - * PLAYAUDIO12 is broken on the Aztech; work around it. - * 2.05x Aug 11, 1995 -- lots of data structure renaming/restructuring in ide.c - * (my apologies to Scott, but now ide-cd.c is independent) - * 3.00 Aug 22, 1995 -- Implement CDROMMULTISESSION ioctl. - * Implement CDROMREADAUDIO ioctl (UNTESTED). - * Use input_ide_data() and output_ide_data(). - * Add door locking. - * Fix usage count leak in cdrom_open, which happened - * when a read-write mount was attempted. - * Try to load the disk on open. - * Implement CDROMEJECT_SW ioctl (off by default). - * Read total cdrom capacity during open. - * Rearrange logic in cdrom_decode_status. Issue - * request sense commands for failed packet commands - * from here instead of from cdrom_queue_packet_command. - * Fix a race condition in retrieving error information. - * Suppress printing normal unit attention errors and - * some drive not ready errors. - * Implement CDROMVOLREAD ioctl. - * Implement CDROMREADMODE1/2 ioctls. - * Fix race condition in setting up interrupt handlers - * when the `serialize' option is used. - * 3.01 Sep 2, 1995 -- Fix ordering of reenabling interrupts in - * cdrom_queue_request. - * Another try at using ide_[input,output]_data. - * 3.02 Sep 16, 1995 -- Stick total disk capacity in partition table as well. - * Make VERBOSE_IDE_CD_ERRORS dump failed command again. - * Dump out more information for ILLEGAL REQUEST errs. - * Fix handling of errors occurring before the - * packet command is transferred. - * Fix transfers with odd bytelengths. - * 3.03 Oct 27, 1995 -- Some Creative drives have an id of just `CD'. - * `DCI-2S10' drives are broken too. - * 3.04 Nov 20, 1995 -- So are Vertos drives. - * 3.05 Dec 1, 1995 -- Changes to go with overhaul of ide.c and ide-tape.c - * 3.06 Dec 16, 1995 -- Add support needed for partitions. - * More workarounds for Vertos bugs (based on patches - * from Holger Dietze ). - * Try to eliminate byteorder assumptions. - * Use atapi_cdrom_subchnl struct definition. - * Add STANDARD_ATAPI compilation option. - * 3.07 Jan 29, 1996 -- More twiddling for broken drives: Sony 55D, - * Vertos 300. - * Add NO_DOOR_LOCKING configuration option. - * Handle drive_cmd requests w/NULL args (for hdparm -t). - * Work around sporadic Sony55e audio play problem. - * 3.07a Feb 11, 1996 -- check drive->id for NULL before dereferencing, to fix - * problem with "hde=cdrom" with no drive present. -ml - * 3.08 Mar 6, 1996 -- More Vertos workarounds. - * 3.09 Apr 5, 1996 -- Add CDROMCLOSETRAY ioctl. - * Switch to using MSF addressing for audio commands. - * Reformat to match kernel tabbing style. - * Add CDROM_GET_UPC ioctl. - * 3.10 Apr 10, 1996 -- Fix compilation error with STANDARD_ATAPI. - * 3.11 Apr 29, 1996 -- Patch from Heiko Eißfeldt - * to remove redundant verify_area calls. - * 3.12 May 7, 1996 -- Rudimentary changer support. Based on patches - * from Gerhard Zuber . - * Let open succeed even if there's no loaded disc. - * 3.13 May 19, 1996 -- Fixes for changer code. - * 3.14 May 29, 1996 -- Add work-around for Vertos 600. - * (From Hennus Bergman .) - * 3.15 July 2, 1996 -- Added support for Sanyo 3 CD changers - * from Ben Galliart with - * special help from Jeff Lightfoot - * - * 3.15a July 9, 1996 -- Improved Sanyo 3 CD changer identification - * 3.16 Jul 28, 1996 -- Fix from Gadi to reduce kernel stack usage for ioctl. - * 3.17 Sep 17, 1996 -- Tweak audio reads for some drives. - * Start changing CDROMLOADFROMSLOT to CDROM_SELECT_DISC. - * 3.18 Oct 31, 1996 -- Added module and DMA support. - * - * 4.00 Nov 5, 1996 -- New ide-cd maintainer, - * Erik B. Andersen - * -- Newer Creative drives don't always set the error - * register correctly. Make sure we see media changes - * regardless. - * -- Integrate with generic cdrom driver. - * -- CDROMGETSPINDOWN and CDROMSETSPINDOWN ioctls, based on - * a patch from Ciro Cattuto <>. - * -- Call set_device_ro. - * -- Implement CDROMMECHANISMSTATUS and CDROMSLOTTABLE - * ioctls, based on patch by Erik Andersen - * -- Add some probes of drive capability during setup. - * - * 4.01 Nov 11, 1996 -- Split into ide-cd.c and ide-cd.h - * -- Removed CDROMMECHANISMSTATUS and CDROMSLOTTABLE - * ioctls in favor of a generalized approach - * using the generic cdrom driver. - * -- Fully integrated with the 2.1.X kernel. - * -- Other stuff that I forgot (lots of changes) - * - * 4.02 Dec 01, 1996 -- Applied patch from Gadi Oxman - * to fix the drive door locking problems. - * - * 4.03 Dec 04, 1996 -- Added DSC overlap support. - * 4.04 Dec 29, 1996 -- Added CDROMREADRAW ioclt based on patch - * by Ales Makarov (xmakarov@sun.felk.cvut.cz) - * - * 4.05 Nov 20, 1997 -- Modified to print more drive info on init - * Minor other changes - * Fix errors on CDROMSTOP (If you have a "Dolphin", - * you must define IHAVEADOLPHIN) - * Added identifier so new Sanyo CD-changer works - * Better detection if door locking isn't supported - * - * 4.06 Dec 17, 1997 -- fixed endless "tray open" messages -ml - * 4.07 Dec 17, 1997 -- fallback to set pc->stat on "tray open" - * 4.08 Dec 18, 1997 -- spew less noise when tray is empty - * -- fix speed display for ACER 24X, 18X - * 4.09 Jan 04, 1998 -- fix handling of the last block so we return - * an end of file instead of an I/O error (Gadi) - * 4.10 Jan 24, 1998 -- fixed a bug so now changers can change to a new - * slot when there is no disc in the current slot. - * -- Fixed a memory leak where info->changer_info was - * malloc'ed but never free'd when closing the device. - * -- Cleaned up the global namespace a bit by making more - * functions static that should already have been. - * 4.11 Mar 12, 1998 -- Added support for the CDROM_SELECT_SPEED ioctl - * based on a patch for 2.0.33 by Jelle Foks - * , a patch for 2.0.33 - * by Toni Giorgino , the SCSI - * version, and my own efforts. -erik - * -- Fixed a stupid bug which egcs was kind enough to - * inform me of where "Illegal mode for this track" - * was never returned due to a comparison on data - * types of limited range. - * 4.12 Mar 29, 1998 -- Fixed bug in CDROM_SELECT_SPEED so write speed is - * now set ionly for CD-R and CD-RW drives. I had - * removed this support because it produced errors. - * It produced errors _only_ for non-writers. duh. - * 4.13 May 05, 1998 -- Suppress useless "in progress of becoming ready" - * messages, since this is not an error. - * -- Change error messages to be const - * -- Remove a "\t" which looks ugly in the syslogs - * 4.14 July 17, 1998 -- Change to pointing to .ps version of ATAPI spec - * since the .pdf version doesn't seem to work... - * -- Updated the TODO list to something more current. - * - * 4.15 Aug 25, 1998 -- Updated ide-cd.h to respect machine endianness, - * patch thanks to "Eddie C. Dost" - * - * 4.50 Oct 19, 1998 -- New maintainers! - * Jens Axboe - * Chris Zwilling - * - * 4.51 Dec 23, 1998 -- Jens Axboe - * - ide_cdrom_reset enabled since the ide subsystem - * handles resets fine now. - * - Transfer size fix for Samsung CD-ROMs, thanks to - * "Ville Hallik" . - * - other minor stuff. - * - * 4.52 Jan 19, 1999 -- Jens Axboe - * - Detect DVD-ROM/RAM drives - * - * 4.53 Feb 22, 1999 - Include other model Samsung and one Goldstar - * drive in transfer size limit. - * - Fix the I/O error when doing eject without a medium - * loaded on some drives. - * - CDROMREADMODE2 is now implemented through - * CDROMREADRAW, since many drives don't support - * MODE2 (even though ATAPI 2.6 says they must). - * - Added ignore parameter to ide-cd (as a module), eg - * insmod ide-cd ignore='hda hdb' - * Useful when using ide-cd in conjunction with - * ide-scsi. TODO: non-modular way of doing the - * same. - * - * 4.54 Aug 5, 1999 - Support for MMC2 class commands through the generic - * packet interface to cdrom.c. - * - Unified audio ioctl support, most of it. - * - cleaned up various deprecated verify_area(). - * - Added ide_cdrom_packet() as the interface for - * the Uniform generic_packet(). - * - bunch of other stuff, will fill in logs later. - * - report 1 slot for non-changers, like the other - * cd-rom drivers. don't report select disc for - * non-changers as well. - * - mask out audio playing, if the device can't do it. - * - * 4.55 Sep 1, 1999 - Eliminated the rest of the audio ioctls, except - * for CDROMREADTOC[ENTRY|HEADER]. Some of the drivers - * use this independently of the actual audio handling. - * They will disappear later when I get the time to - * do it cleanly. - * - Minimize the TOC reading - only do it when we - * know a media change has occurred. - * - Moved all the CDROMREADx ioctls to the Uniform layer. - * - Heiko Eißfeldt supplied - * some fixes for CDI. - * - CD-ROM leaving door locked fix from Andries - * Brouwer - * - Erik Andersen unified - * commands across the various drivers and how - * sense errors are handled. - * - * 4.56 Sep 12, 1999 - Removed changer support - it is now in the - * Uniform layer. - * - Added partition based multisession handling. - * - Mode sense and mode select moved to the - * Uniform layer. - * - Fixed a problem with WPI CDS-32X drive - it - * failed the capabilities - * - * 4.57 Apr 7, 2000 - Fixed sense reporting. - * - Fixed possible oops in ide_cdrom_get_last_session() - * - Fix locking mania and make ide_cdrom_reset relock - * - Stop spewing errors to log when magicdev polls with - * TEST_UNIT_READY on some drives. - * - Various fixes from Tobias Ringstrom: - * tray if it was locked prior to the reset. - * - cdrom_read_capacity returns one frame too little. - * - Fix real capacity reporting. - * - * 4.58 May 1, 2000 - Clean up ACER50 stuff. - * - Fix small problem with ide_cdrom_capacity - * - * 4.59 Aug 11, 2000 - Fix changer problem in cdrom_read_toc, we weren't - * correctly sensing a disc change. - * - Rearranged some code - * - Use extended sense on drives that support it for - * correctly reporting tray status -- from - * Michael D Johnson - * 4.60 Dec 17, 2003 - Add mt rainier support - * - Bump timeout for packet commands, matches sr - * - Odd stuff - * 4.61 Jan 22, 2004 - support hardware sector sizes other than 2kB, - * Pascal Schmidt - */ diff --git a/Documentation/ide/ChangeLog.ide-floppy.1996-2002 b/Documentation/ide/ChangeLog.ide-floppy.1996-2002 deleted file mode 100644 index 46c19ef..0000000 --- a/Documentation/ide/ChangeLog.ide-floppy.1996-2002 +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Many thanks to Lode Leroy , who tested so many - * ALPHA patches to this driver on an EASYSTOR LS-120 ATAPI floppy drive. - * - * Ver 0.1 Oct 17 96 Initial test version, mostly based on ide-tape.c. - * Ver 0.2 Oct 31 96 Minor changes. - * Ver 0.3 Dec 2 96 Fixed error recovery bug. - * Ver 0.4 Jan 26 97 Add support for the HDIO_GETGEO ioctl. - * Ver 0.5 Feb 21 97 Add partitions support. - * Use the minimum of the LBA and CHS capacities. - * Avoid hwgroup->rq == NULL on the last irq. - * Fix potential null dereferencing with DEBUG_LOG. - * Ver 0.8 Dec 7 97 Increase irq timeout from 10 to 50 seconds. - * Add media write-protect detection. - * Issue START command only if TEST UNIT READY fails. - * Add work-around for IOMEGA ZIP revision 21.D. - * Remove idefloppy_get_capabilities(). - * Ver 0.9 Jul 4 99 Fix a bug which might have caused the number of - * bytes requested on each interrupt to be zero. - * Thanks to for pointing this out. - * Ver 0.9.sv Jan 6 01 Sam Varshavchik - * Implement low level formatting. Reimplemented - * IDEFLOPPY_CAPABILITIES_PAGE, since we need the srfp - * bit. My LS-120 drive barfs on - * IDEFLOPPY_CAPABILITIES_PAGE, but maybe it's just me. - * Compromise by not reporting a failure to get this - * mode page. Implemented four IOCTLs in order to - * implement formatting. IOCTls begin with 0x4600, - * 0x46 is 'F' as in Format. - * Jan 9 01 Userland option to select format verify. - * Added PC_SUPPRESS_ERROR flag - some idefloppy drives - * do not implement IDEFLOPPY_CAPABILITIES_PAGE, and - * return a sense error. Suppress error reporting in - * this particular case in order to avoid spurious - * errors in syslog. The culprit is - * idefloppy_get_capability_page(), so move it to - * idefloppy_begin_format() so that it's not used - * unless absolutely necessary. - * If drive does not support format progress indication - * monitor the dsc bit in the status register. - * Also, O_NDELAY on open will allow the device to be - * opened without a disk available. This can be used to - * open an unformatted disk, or get the device capacity. - * Ver 0.91 Dec 11 99 Added IOMEGA Clik! drive support by - * - * Ver 0.92 Oct 22 00 Paul Bristow became official maintainer for this - * driver. Included Powerbook internal zip kludge. - * Ver 0.93 Oct 24 00 Fixed bugs for Clik! drive - * no disk on insert and disk change now works - * Ver 0.94 Oct 27 00 Tidied up to remove strstr(Clik) everywhere - * Ver 0.95 Nov 7 00 Brought across to kernel 2.4 - * Ver 0.96 Jan 7 01 Actually in line with release version of 2.4.0 - * including set_bit patch from Rusty Russell - * Ver 0.97 Jul 22 01 Merge 0.91-0.96 onto 0.9.sv for ac series - * Ver 0.97.sv Aug 3 01 Backported from 2.4.7-ac3 - * Ver 0.98 Oct 26 01 Split idefloppy_transfer_pc into two pieces to - * fix a lost interrupt problem. It appears the busy - * bit was being deasserted by my IOMEGA ATAPI ZIP 100 - * drive before the drive was actually ready. - * Ver 0.98a Oct 29 01 Expose delay value so we can play. - * Ver 0.99 Feb 24 02 Remove duplicate code, modify clik! detection code - * to support new PocketZip drives - */ diff --git a/Documentation/ide/ChangeLog.ide-tape.1995-2002 b/Documentation/ide/ChangeLog.ide-tape.1995-2002 deleted file mode 100644 index 877fac8..0000000 --- a/Documentation/ide/ChangeLog.ide-tape.1995-2002 +++ /dev/null @@ -1,257 +0,0 @@ -/* - * Ver 0.1 Nov 1 95 Pre-working code :-) - * Ver 0.2 Nov 23 95 A short backup (few megabytes) and restore procedure - * was successful ! (Using tar cvf ... on the block - * device interface). - * A longer backup resulted in major swapping, bad - * overall Linux performance and eventually failed as - * we received non serial read-ahead requests from the - * buffer cache. - * Ver 0.3 Nov 28 95 Long backups are now possible, thanks to the - * character device interface. Linux's responsiveness - * and performance doesn't seem to be much affected - * from the background backup procedure. - * Some general mtio.h magnetic tape operations are - * now supported by our character device. As a result, - * popular tape utilities are starting to work with - * ide tapes :-) - * The following configurations were tested: - * 1. An IDE ATAPI TAPE shares the same interface - * and irq with an IDE ATAPI CDROM. - * 2. An IDE ATAPI TAPE shares the same interface - * and irq with a normal IDE disk. - * Both configurations seemed to work just fine ! - * However, to be on the safe side, it is meanwhile - * recommended to give the IDE TAPE its own interface - * and irq. - * The one thing which needs to be done here is to - * add a "request postpone" feature to ide.c, - * so that we won't have to wait for the tape to finish - * performing a long media access (DSC) request (such - * as a rewind) before we can access the other device - * on the same interface. This effect doesn't disturb - * normal operation most of the time because read/write - * requests are relatively fast, and once we are - * performing one tape r/w request, a lot of requests - * from the other device can be queued and ide.c will - * service all of them after this single tape request. - * Ver 1.0 Dec 11 95 Integrated into Linux 1.3.46 development tree. - * On each read / write request, we now ask the drive - * if we can transfer a constant number of bytes - * (a parameter of the drive) only to its buffers, - * without causing actual media access. If we can't, - * we just wait until we can by polling the DSC bit. - * This ensures that while we are not transferring - * more bytes than the constant referred to above, the - * interrupt latency will not become too high and - * we won't cause an interrupt timeout, as happened - * occasionally in the previous version. - * While polling for DSC, the current request is - * postponed and ide.c is free to handle requests from - * the other device. This is handled transparently to - * ide.c. The hwgroup locking method which was used - * in the previous version was removed. - * Use of new general features which are provided by - * ide.c for use with atapi devices. - * (Programming done by Mark Lord) - * Few potential bug fixes (Again, suggested by Mark) - * Single character device data transfers are now - * not limited in size, as they were before. - * We are asking the tape about its recommended - * transfer unit and send a larger data transfer - * as several transfers of the above size. - * For best results, use an integral number of this - * basic unit (which is shown during driver - * initialization). I will soon add an ioctl to get - * this important parameter. - * Our data transfer buffer is allocated on startup, - * rather than before each data transfer. This should - * ensure that we will indeed have a data buffer. - * Ver 1.1 Dec 14 95 Fixed random problems which occurred when the tape - * shared an interface with another device. - * (poll_for_dsc was a complete mess). - * Removed some old (non-active) code which had - * to do with supporting buffer cache originated - * requests. - * The block device interface can now be opened, so - * that general ide driver features like the unmask - * interrupts flag can be selected with an ioctl. - * This is the only use of the block device interface. - * New fast pipelined operation mode (currently only on - * writes). When using the pipelined mode, the - * throughput can potentially reach the maximum - * tape supported throughput, regardless of the - * user backup program. On my tape drive, it sometimes - * boosted performance by a factor of 2. Pipelined - * mode is enabled by default, but since it has a few - * downfalls as well, you may want to disable it. - * A short explanation of the pipelined operation mode - * is available below. - * Ver 1.2 Jan 1 96 Eliminated pipelined mode race condition. - * Added pipeline read mode. As a result, restores - * are now as fast as backups. - * Optimized shared interface behavior. The new behavior - * typically results in better IDE bus efficiency and - * higher tape throughput. - * Pre-calculation of the expected read/write request - * service time, based on the tape's parameters. In - * the pipelined operation mode, this allows us to - * adjust our polling frequency to a much lower value, - * and thus to dramatically reduce our load on Linux, - * without any decrease in performance. - * Implemented additional mtio.h operations. - * The recommended user block size is returned by - * the MTIOCGET ioctl. - * Additional minor changes. - * Ver 1.3 Feb 9 96 Fixed pipelined read mode bug which prevented the - * use of some block sizes during a restore procedure. - * The character device interface will now present a - * continuous view of the media - any mix of block sizes - * during a backup/restore procedure is supported. The - * driver will buffer the requests internally and - * convert them to the tape's recommended transfer - * unit, making performance almost independent of the - * chosen user block size. - * Some improvements in error recovery. - * By cooperating with ide-dma.c, bus mastering DMA can - * now sometimes be used with IDE tape drives as well. - * Bus mastering DMA has the potential to dramatically - * reduce the CPU's overhead when accessing the device, - * and can be enabled by using hdparm -d1 on the tape's - * block device interface. For more info, read the - * comments in ide-dma.c. - * Ver 1.4 Mar 13 96 Fixed serialize support. - * Ver 1.5 Apr 12 96 Fixed shared interface operation, broken in 1.3.85. - * Fixed pipelined read mode inefficiency. - * Fixed nasty null dereferencing bug. - * Ver 1.6 Aug 16 96 Fixed FPU usage in the driver. - * Fixed end of media bug. - * Ver 1.7 Sep 10 96 Minor changes for the CONNER CTT8000-A model. - * Ver 1.8 Sep 26 96 Attempt to find a better balance between good - * interactive response and high system throughput. - * Ver 1.9 Nov 5 96 Automatically cross encountered filemarks rather - * than requiring an explicit FSF command. - * Abort pending requests at end of media. - * MTTELL was sometimes returning incorrect results. - * Return the real block size in the MTIOCGET ioctl. - * Some error recovery bug fixes. - * Ver 1.10 Nov 5 96 Major reorganization. - * Reduced CPU overhead a bit by eliminating internal - * bounce buffers. - * Added module support. - * Added multiple tape drives support. - * Added partition support. - * Rewrote DSC handling. - * Some portability fixes. - * Removed ide-tape.h. - * Additional minor changes. - * Ver 1.11 Dec 2 96 Bug fix in previous DSC timeout handling. - * Use ide_stall_queue() for DSC overlap. - * Use the maximum speed rather than the current speed - * to compute the request service time. - * Ver 1.12 Dec 7 97 Fix random memory overwriting and/or last block data - * corruption, which could occur if the total number - * of bytes written to the tape was not an integral - * number of tape blocks. - * Add support for INTERRUPT DRQ devices. - * Ver 1.13 Jan 2 98 Add "speed == 0" work-around for HP COLORADO 5GB - * Ver 1.14 Dec 30 98 Partial fixes for the Sony/AIWA tape drives. - * Replace cli()/sti() with hwgroup spinlocks. - * Ver 1.15 Mar 25 99 Fix SMP race condition by replacing hwgroup - * spinlock with private per-tape spinlock. - * Ver 1.16 Sep 1 99 Add OnStream tape support. - * Abort read pipeline on EOD. - * Wait for the tape to become ready in case it returns - * "in the process of becoming ready" on open(). - * Fix zero padding of the last written block in - * case the tape block size is larger than PAGE_SIZE. - * Decrease the default disconnection time to tn. - * Ver 1.16e Oct 3 99 Minor fixes. - * Ver 1.16e1 Oct 13 99 Patches by Arnold Niessen, - * niessen@iae.nl / arnold.niessen@philips.com - * GO-1) Undefined code in idetape_read_position - * according to Gadi's email - * AJN-1) Minor fix asc == 11 should be asc == 0x11 - * in idetape_issue_packet_command (did effect - * debugging output only) - * AJN-2) Added more debugging output, and - * added ide-tape: where missing. I would also - * like to add tape->name where possible - * AJN-3) Added different debug_level's - * via /proc/ide/hdc/settings - * "debug_level" determines amount of debugging output; - * can be changed using /proc/ide/hdx/settings - * 0 : almost no debugging output - * 1 : 0+output errors only - * 2 : 1+output all sensekey/asc - * 3 : 2+follow all chrdev related procedures - * 4 : 3+follow all procedures - * 5 : 4+include pc_stack rq_stack info - * 6 : 5+USE_COUNT updates - * AJN-4) Fixed timeout for retension in idetape_queue_pc_tail - * from 5 to 10 minutes - * AJN-5) Changed maximum number of blocks to skip when - * reading tapes with multiple consecutive write - * errors from 100 to 1000 in idetape_get_logical_blk - * Proposed changes to code: - * 1) output "logical_blk_num" via /proc - * 2) output "current_operation" via /proc - * 3) Either solve or document the fact that `mt rewind' is - * required after reading from /dev/nhtx to be - * able to rmmod the idetape module; - * Also, sometimes an application finishes but the - * device remains `busy' for some time. Same cause ? - * Proposed changes to release-notes: - * 4) write a simple `quickstart' section in the - * release notes; I volunteer if you don't want to - * 5) include a pointer to video4linux in the doc - * to stimulate video applications - * 6) release notes lines 331 and 362: explain what happens - * if the application data rate is higher than 1100 KB/s; - * similar approach to lower-than-500 kB/s ? - * 7) 6.6 Comparison; wouldn't it be better to allow different - * strategies for read and write ? - * Wouldn't it be better to control the tape buffer - * contents instead of the bandwidth ? - * 8) line 536: replace will by would (if I understand - * this section correctly, a hypothetical and unwanted situation - * is being described) - * Ver 1.16f Dec 15 99 Change place of the secondary OnStream header frames. - * Ver 1.17 Nov 2000 / Jan 2001 Marcel Mol, marcel@mesa.nl - * - Add idetape_onstream_mode_sense_tape_parameter_page - * function to get tape capacity in frames: tape->capacity. - * - Add support for DI-50 drives( or any DI- drive). - * - 'workaround' for read error/blank block around block 3000. - * - Implement Early warning for end of media for Onstream. - * - Cosmetic code changes for readability. - * - Idetape_position_tape should not use SKIP bit during - * Onstream read recovery. - * - Add capacity, logical_blk_num and first/last_frame_position - * to /proc/ide/hd?/settings. - * - Module use count was gone in the Linux 2.4 driver. - * Ver 1.17a Apr 2001 Willem Riede osst@riede.org - * - Get drive's actual block size from mode sense block descriptor - * - Limit size of pipeline - * Ver 1.17b Oct 2002 Alan Stern - * Changed IDETAPE_MIN_PIPELINE_STAGES to 1 and actually used - * it in the code! - * Actually removed aborted stages in idetape_abort_pipeline - * instead of just changing the command code. - * Made the transfer byte count for Request Sense equal to the - * actual length of the data transfer. - * Changed handling of partial data transfers: they do not - * cause DMA errors. - * Moved initiation of DMA transfers to the correct place. - * Removed reference to unallocated memory. - * Made __idetape_discard_read_pipeline return the number of - * sectors skipped, not the number of stages. - * Replaced errant kfree() calls with __idetape_kfree_stage(). - * Fixed off-by-one error in testing the pipeline length. - * Fixed handling of filemarks in the read pipeline. - * Small code optimization for MTBSF and MTBSFM ioctls. - * Don't try to unlock the door during device close if is - * already unlocked! - * Cosmetic fixes to miscellaneous debugging output messages. - * Set the minimum /proc/ide/hd?/settings values for "pipeline", - * "pipeline_min", and "pipeline_max" to 1. - */ diff --git a/Documentation/ide/changelogs.rst b/Documentation/ide/changelogs.rst deleted file mode 100644 index fdf9d0f..0000000 --- a/Documentation/ide/changelogs.rst +++ /dev/null @@ -1,17 +0,0 @@ -Changelog for ide cd --------------------- - - .. include:: ChangeLog.ide-cd.1994-2004 - :literal: - -Changelog for ide floppy ------------------------- - - .. include:: ChangeLog.ide-floppy.1996-2002 - :literal: - -Changelog for ide tape ----------------------- - - .. include:: ChangeLog.ide-tape.1995-2002 - :literal: diff --git a/Documentation/ide/ide-tape.rst b/Documentation/ide/ide-tape.rst deleted file mode 100644 index 3e061d9c..0000000 --- a/Documentation/ide/ide-tape.rst +++ /dev/null @@ -1,68 +0,0 @@ -=============================== -IDE ATAPI streaming tape driver -=============================== - -This driver is a part of the Linux ide driver. - -The driver, in co-operation with ide.c, basically traverses the -request-list for the block device interface. The character device -interface, on the other hand, creates new requests, adds them -to the request-list of the block device, and waits for their completion. - -The block device major and minor numbers are determined from the -tape's relative position in the ide interfaces, as explained in ide.c. - -The character device interface consists of the following devices:: - - ht0 major 37, minor 0 first IDE tape, rewind on close. - ht1 major 37, minor 1 second IDE tape, rewind on close. - ... - nht0 major 37, minor 128 first IDE tape, no rewind on close. - nht1 major 37, minor 129 second IDE tape, no rewind on close. - ... - -The general magnetic tape commands compatible interface, as defined by -include/linux/mtio.h, is accessible through the character device. - -General ide driver configuration options, such as the interrupt-unmask -flag, can be configured by issuing an ioctl to the block device interface, -as any other ide device. - -Our own ide-tape ioctl's can be issued to either the block device or -the character device interface. - -Maximal throughput with minimal bus load will usually be achieved in the -following scenario: - - 1. ide-tape is operating in the pipelined operation mode. - 2. No buffering is performed by the user backup program. - -Testing was done with a 2 GB CONNER CTMA 4000 IDE ATAPI Streaming Tape Drive. - -Here are some words from the first releases of hd.c, which are quoted -in ide.c and apply here as well: - -* Special care is recommended. Have Fun! - -Possible improvements -===================== - -1. Support for the ATAPI overlap protocol. - -In order to maximize bus throughput, we currently use the DSC -overlap method which enables ide.c to service requests from the -other device while the tape is busy executing a command. The -DSC overlap method involves polling the tape's status register -for the DSC bit, and servicing the other device while the tape -isn't ready. - -In the current QIC development standard (December 1995), -it is recommended that new tape drives will *in addition* -implement the ATAPI overlap protocol, which is used for the -same purpose - efficient use of the IDE bus, but is interrupt -driven and thus has much less CPU overhead. - -ATAPI overlap is likely to be supported in most new ATAPI -devices, including new ATAPI cdroms, and thus provides us -a method by which we can achieve higher throughput when -sharing a (fast) ATA-2 disk with any (slow) new ATAPI device. diff --git a/Documentation/ide/ide.rst b/Documentation/ide/ide.rst deleted file mode 100644 index 88bdcba..0000000 --- a/Documentation/ide/ide.rst +++ /dev/null @@ -1,265 +0,0 @@ -============================================ -Information regarding the Enhanced IDE drive -============================================ - - The hdparm utility can be used to control various IDE features on a - running system. It is packaged separately. Please Look for it on popular - linux FTP sites. - -------------------------------------------------------------------------------- - -.. important:: - - BUGGY IDE CHIPSETS CAN CORRUPT DATA!! - - PCI versions of the CMD640 and RZ1000 interfaces are now detected - automatically at startup when PCI BIOS support is configured. - - Linux disables the "prefetch" ("readahead") mode of the RZ1000 - to prevent data corruption possible due to hardware design flaws. - - For the CMD640, linux disables "IRQ unmasking" (hdparm -u1) on any - drive for which the "prefetch" mode of the CMD640 is turned on. - If "prefetch" is disabled (hdparm -p8), then "IRQ unmasking" can be - used again. - - For the CMD640, linux disables "32bit I/O" (hdparm -c1) on any drive - for which the "prefetch" mode of the CMD640 is turned off. - If "prefetch" is enabled (hdparm -p9), then "32bit I/O" can be - used again. - - The CMD640 is also used on some Vesa Local Bus (VLB) cards, and is *NOT* - automatically detected by Linux. For safe, reliable operation with such - interfaces, one *MUST* use the "cmd640.probe_vlb" kernel option. - - Use of the "serialize" option is no longer necessary. - -------------------------------------------------------------------------------- - -Common pitfalls -=============== - -- 40-conductor IDE cables are capable of transferring data in DMA modes up to - udma2, but no faster. - -- If possible devices should be attached to separate channels if they are - available. Typically the disk on the first and CD-ROM on the second. - -- If you mix devices on the same cable, please consider using similar devices - in respect of the data transfer mode they support. - -- Even better try to stick to the same vendor and device type on the same - cable. - -This is the multiple IDE interface driver, as evolved from hd.c -=============================================================== - -It supports up to 9 IDE interfaces per default, on one or more IRQs (usually -14 & 15). There can be up to two drives per interface, as per the ATA-6 spec.:: - - Primary: ide0, port 0x1f0; major=3; hda is minor=0; hdb is minor=64 - Secondary: ide1, port 0x170; major=22; hdc is minor=0; hdd is minor=64 - Tertiary: ide2, port 0x1e8; major=33; hde is minor=0; hdf is minor=64 - Quaternary: ide3, port 0x168; major=34; hdg is minor=0; hdh is minor=64 - fifth.. ide4, usually PCI, probed - sixth.. ide5, usually PCI, probed - -To access devices on interfaces > ide0, device entries please make sure that -device files for them are present in /dev. If not, please create such -entries, by using /dev/MAKEDEV. - -This driver automatically probes for most IDE interfaces (including all PCI -ones), for the drives/geometries attached to those interfaces, and for the IRQ -lines being used by the interfaces (normally 14, 15 for ide0/ide1). - -Any number of interfaces may share a single IRQ if necessary, at a slight -performance penalty, whether on separate cards or a single VLB card. -The IDE driver automatically detects and handles this. However, this may -or may not be harmful to your hardware.. two or more cards driving the same IRQ -can potentially burn each other's bus driver, though in practice this -seldom occurs. Be careful, and if in doubt, don't do it! - -Drives are normally found by auto-probing and/or examining the CMOS/BIOS data. -For really weird situations, the apparent (fdisk) geometry can also be specified -on the kernel "command line" using LILO. The format of such lines is:: - - ide_core.chs=[interface_number.device_number]:cyls,heads,sects - -or:: - - ide_core.cdrom=[interface_number.device_number] - -For example:: - - ide_core.chs=1.0:1050,32,64 ide_core.cdrom=1.1 - -The results of successful auto-probing may override the physical geometry/irq -specified, though the "original" geometry may be retained as the "logical" -geometry for partitioning purposes (fdisk). - -If the auto-probing during boot time confuses a drive (ie. the drive works -with hd.c but not with ide.c), then an command line option may be specified -for each drive for which you'd like the drive to skip the hardware -probe/identification sequence. For example:: - - ide_core.noprobe=0.1 - -or:: - - ide_core.chs=1.0:768,16,32 - ide_core.noprobe=1.0 - -Note that when only one IDE device is attached to an interface, it should be -jumpered as "single" or "master", *not* "slave". Many folks have had -"trouble" with cdroms because of this requirement, so the driver now probes -for both units, though success is more likely when the drive is jumpered -correctly. - -Courtesy of Scott Snyder and others, the driver supports ATAPI cdrom drives -such as the NEC-260 and the new MITSUMI triple/quad speed drives. -Such drives will be identified at boot time, just like a hard disk. - -If for some reason your cdrom drive is *not* found at boot time, you can force -the probe to look harder by supplying a kernel command line parameter -via LILO, such as::: - - ide_core.cdrom=1.0 /* "master" on second interface (hdc) */ - -or:: - - ide_core.cdrom=1.1 /* "slave" on second interface (hdd) */ - -For example, a GW2000 system might have a hard drive on the primary -interface (/dev/hda) and an IDE cdrom drive on the secondary interface -(/dev/hdc). To mount a CD in the cdrom drive, one would use something like:: - - ln -sf /dev/hdc /dev/cdrom - mkdir /mnt/cdrom - mount /dev/cdrom /mnt/cdrom -t iso9660 -o ro - -If, after doing all of the above, mount doesn't work and you see -errors from the driver (with dmesg) complaining about `status=0xff`, -this means that the hardware is not responding to the driver's attempts -to read it. One of the following is probably the problem: - - - Your hardware is broken. - - - You are using the wrong address for the device, or you have the - drive jumpered wrong. Review the configuration instructions above. - - - Your IDE controller requires some nonstandard initialization sequence - before it will work properly. If this is the case, there will often - be a separate MS-DOS driver just for the controller. IDE interfaces - on sound cards usually fall into this category. Such configurations - can often be made to work by first booting MS-DOS, loading the - appropriate drivers, and then warm-booting linux (without powering - off). This can be automated using loadlin in the MS-DOS autoexec. - -If you always get timeout errors, interrupts from the drive are probably -not making it to the host. Check how you have the hardware jumpered -and make sure it matches what the driver expects (see the configuration -instructions above). If you have a PCI system, also check the BIOS -setup; I've had one report of a system which was shipped with IRQ 15 -disabled by the BIOS. - -The kernel is able to execute binaries directly off of the cdrom, -provided it is mounted with the default block size of 1024 (as above). - -Please pass on any feedback on any of this stuff to the maintainer, -whose address can be found in linux/MAINTAINERS. - -The IDE driver is modularized. The high level disk/CD-ROM/tape/floppy -drivers can always be compiled as loadable modules, the chipset drivers -can only be compiled into the kernel, and the core code (ide.c) can be -compiled as a loadable module provided no chipset support is needed. - -When using ide.c as a module in combination with kmod, add:: - - alias block-major-3 ide-probe - -to a configuration file in /etc/modprobe.d/. - -When ide.c is used as a module, you can pass command line parameters to the -driver using the "options=" keyword to insmod, while replacing any ',' with -';'. - - -Summary of ide driver parameters for kernel command line -======================================================== - -For legacy IDE VLB host drivers (ali14xx/dtc2278/ht6560b/qd65xx/umc8672) -you need to explicitly enable probing by using "probe" kernel parameter, -i.e. to enable probing for ALI M14xx chipsets (ali14xx host driver) use: - -* "ali14xx.probe" boot option when ali14xx driver is built-in the kernel - -* "probe" module parameter when ali14xx driver is compiled as module - ("modprobe ali14xx probe") - -Also for legacy CMD640 host driver (cmd640) you need to use "probe_vlb" -kernel paremeter to enable probing for VLB version of the chipset (PCI ones -are detected automatically). - -You also need to use "probe" kernel parameter for ide-4drives driver -(support for IDE generic chipset with four drives on one port). - -To enable support for IDE doublers on Amiga use "doubler" kernel parameter -for gayle host driver (i.e. "gayle.doubler" if the driver is built-in). - -To force ignoring cable detection (this should be needed only if you're using -short 40-wires cable which cannot be automatically detected - if this is not -a case please report it as a bug instead) use "ignore_cable" kernel parameter: - -* "ide_core.ignore_cable=[interface_number]" boot option if IDE is built-in - (i.e. "ide_core.ignore_cable=1" to force ignoring cable for "ide1") - -* "ignore_cable=[interface_number]" module parameter (for ide_core module) - if IDE is compiled as module - -Other kernel parameters for ide_core are: - -* "nodma=[interface_number.device_number]" to disallow DMA for a device - -* "noflush=[interface_number.device_number]" to disable flush requests - -* "nohpa=[interface_number.device_number]" to disable Host Protected Area - -* "noprobe=[interface_number.device_number]" to skip probing - -* "nowerr=[interface_number.device_number]" to ignore the WRERR_STAT bit - -* "cdrom=[interface_number.device_number]" to force device as a CD-ROM - -* "chs=[interface_number.device_number]" to force device as a disk (using CHS) - - -Some Terminology -================ - -IDE - Integrated Drive Electronics, meaning that each drive has a built-in - controller, which is why an "IDE interface card" is not a "controller card". - -ATA - AT (the old IBM 286 computer) Attachment Interface, a draft American - National Standard for connecting hard drives to PCs. This is the official - name for "IDE". - - The latest standards define some enhancements, known as the ATA-6 spec, - which grew out of vendor-specific "Enhanced IDE" (EIDE) implementations. - -ATAPI - ATA Packet Interface, a new protocol for controlling the drives, - similar to SCSI protocols, created at the same time as the ATA2 standard. - ATAPI is currently used for controlling CDROM, TAPE and FLOPPY (ZIP or - LS120/240) devices, removable R/W cartridges, and for high capacity hard disk - drives. - -mlord@pobox.com - - -Wed Apr 17 22:52:44 CEST 2002 edited by Marcin Dalecki, the current -maintainer. - -Wed Aug 20 22:31:29 CEST 2003 updated ide boot options to current ide.c -comments at 2.6.0-test4 time. Maciej Soltysiak diff --git a/Documentation/ide/index.rst b/Documentation/ide/index.rst deleted file mode 100644 index 813dfe6..0000000 --- a/Documentation/ide/index.rst +++ /dev/null @@ -1,21 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -================================== -Integrated Drive Electronics (IDE) -================================== - -.. toctree:: - :maxdepth: 1 - - ide - ide-tape - warm-plug-howto - - changelogs - -.. only:: subproject and html - - Indices - ======= - - * :ref:`genindex` diff --git a/Documentation/ide/warm-plug-howto.rst b/Documentation/ide/warm-plug-howto.rst deleted file mode 100644 index c245242e..0000000 --- a/Documentation/ide/warm-plug-howto.rst +++ /dev/null @@ -1,18 +0,0 @@ -=================== -IDE warm-plug HOWTO -=================== - -To warm-plug devices on a port 'idex':: - - # echo -n "1" > /sys/class/ide_port/idex/delete_devices - -unplug old device(s) and plug new device(s):: - - # echo -n "1" > /sys/class/ide_port/idex/scan - -done - -NOTE: please make sure that partitions are unmounted and that there are -no other active references to devices before doing "delete_devices" step, -also do not attempt "scan" step on devices currently in use -- otherwise -results may be unpredictable and lead to data loss if you're unlucky diff --git a/Documentation/index.rst b/Documentation/index.rst index 1988c19..6b7e453 100644 --- a/Documentation/index.rst +++ b/Documentation/index.rst @@ -103,7 +103,6 @@ needed). block/index cdrom/index cpu-freq/index - ide/index fb/index fpga/index hid/index -- 2.7.4