From 89099d1432843a7a6bbaac6d33e37365c9fe27ad Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 22 Feb 2020 15:04:34 +0900 Subject: [PATCH] dt-bindings: gpio: Convert UniPhier GPIO to json-schema Convert the UniPhier GPIO controller binding to DT schema format. I omitted the 'gpio-ranges' property because it is defined in the dt-schema project (/schemas/gpio/gpio.yaml). As of writing, the 'gpio-ranges-group-names' is not defined in that file despite it is a common property described in Documentation/devicetree/bindings/gpio/gpio.txt So, I defined it in this schema. Signed-off-by: Masahiro Yamada Signed-off-by: Rob Herring --- .../devicetree/bindings/gpio/gpio-uniphier.txt | 51 ------------ .../bindings/gpio/socionext,uniphier-gpio.yaml | 92 ++++++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 93 insertions(+), 52 deletions(-) delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-uniphier.txt create mode 100644 Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml diff --git a/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt b/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt deleted file mode 100644 index f281f12..0000000 --- a/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt +++ /dev/null @@ -1,51 +0,0 @@ -UniPhier GPIO controller - -Required properties: -- compatible: Should be "socionext,uniphier-gpio". -- reg: Specifies offset and length of the register set for the device. -- gpio-controller: Marks the device node as a GPIO controller. -- #gpio-cells: Should be 2. The first cell is the pin number and the second - cell is used to specify optional parameters. -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells: Should be 2. The first cell defines the interrupt number. - The second cell bits[3:0] is used to specify trigger type as follows: - 1 = low-to-high edge triggered - 2 = high-to-low edge triggered - 4 = active high level-sensitive - 8 = active low level-sensitive - Valid combinations are 1, 2, 3, 4, 8. -- ngpios: Specifies the number of GPIO lines. -- gpio-ranges: Mapping to pin controller pins (as described in gpio.txt) -- socionext,interrupt-ranges: Specifies an interrupt number mapping between - this GPIO controller and its interrupt parent, in the form of arbitrary - number of triplets. - -Optional properties: -- gpio-ranges-group-names: Used for named gpio ranges (as described in gpio.txt) - -Example: - gpio: gpio@55000000 { - compatible = "socionext,uniphier-gpio"; - reg = <0x55000000 0x200>; - interrupt-parent = <&aidet>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinctrl 0 0 0>; - gpio-ranges-group-names = "gpio_range"; - ngpios = <248>; - socionext,interrupt-ranges = <0 48 16>, <16 154 5>, <21 217 3>; - }; - -Consumer Example: - - sdhci0_pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio UNIPHIER_GPIO_PORT(29, 4) GPIO_ACTIVE_LOW>; - }; - -Please note UNIPHIER_GPIO_PORT(29, 4) represents PORT294 in the SoC document. -Unfortunately, only the one's place is octal in the port numbering. (That is, -PORT 8, 9, 18, 19, 28, 29, ... are missing.) UNIPHIER_GPIO_PORT() is a helper -macro to calculate 29 * 8 + 4. diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml new file mode 100644 index 0000000..580a39e --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/socionext,uniphier-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier GPIO controller + +maintainers: + - Masahiro Yamada + +properties: + $nodename: + pattern: "^gpio@[0-9a-f]+$" + + compatible: + const: socionext,uniphier-gpio + + reg: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + + interrupt-controller: true + + "#interrupt-cells": + description: | + The first cell defines the interrupt number. + The second cell bits[3:0] is used to specify trigger type as follows: + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered + 4 = active high level-sensitive + 8 = active low level-sensitive + Valid combinations are 1, 2, 3, 4, 8. + const: 2 + + ngpios: + minimum: 0 + maximum: 512 + + gpio-ranges-group-names: + $ref: /schemas/types.yaml#/definitions/string-array + + socionext,interrupt-ranges: + description: | + Specifies an interrupt number mapping between this GPIO controller and + its interrupt parent, in the form of arbitrary number of + triplets. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + - interrupt-controller + - "#interrupt-cells" + - ngpios + - gpio-ranges + - socionext,interrupt-ranges + +examples: + - | + #include + #include + + gpio: gpio@55000000 { + compatible = "socionext,uniphier-gpio"; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>; + gpio-ranges-group-names = "gpio_range"; + ngpios = <248>; + socionext,interrupt-ranges = <0 48 16>, <16 154 5>, <21 217 3>; + }; + + // Consumer: + // Please note UNIPHIER_GPIO_PORT(29, 4) represents PORT294 in the SoC + // document. Unfortunately, only the one's place is octal in the port + // numbering. (That is, PORT 8, 9, 18, 19, 28, 29, ... do not exist.) + // UNIPHIER_GPIO_PORT() is a helper macro to calculate 29 * 8 + 4. + sdhci0_pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio UNIPHIER_GPIO_PORT(29, 4) GPIO_ACTIVE_LOW>; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 67402bb..56fe62c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2547,7 +2547,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) T: git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier.git S: Maintained F: Documentation/devicetree/bindings/arm/socionext/uniphier.yaml -F: Documentation/devicetree/bindings/gpio/gpio-uniphier.txt +F: Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml F: Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.txt F: arch/arm/boot/dts/uniphier* F: arch/arm/include/asm/hardware/cache-uniphier.h -- 2.7.4