From 88b12a9a66a4714a572d415cc4d6b257a8da61d4 Mon Sep 17 00:00:00 2001 From: Frank Mori Hess Date: Thu, 19 Feb 2009 09:32:42 -0800 Subject: [PATCH] Staging: comedi: add cb_pcidas64 driver Driver for the ComputerBoards/MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 cards. From: Frank Mori Hess Cc: David Schleef Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/cb_pcidas64.c | 4220 ++++++++++++++++++++++++++ 1 file changed, 4220 insertions(+) create mode 100644 drivers/staging/comedi/drivers/cb_pcidas64.c diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c new file mode 100644 index 0000000..9f056aa --- /dev/null +++ b/drivers/staging/comedi/drivers/cb_pcidas64.c @@ -0,0 +1,4220 @@ +/* + comedi/drivers/cb_pcidas64.c + This is a driver for the ComputerBoards/MeasurementComputing PCI-DAS + 64xx, 60xx, and 4020 cards. + + Author: Frank Mori Hess + Copyright (C) 2001, 2002 Frank Mori Hess + + Thanks also go to the following people: + + Steve Rosenbluth, for providing the source code for + his pci-das6402 driver, and source code for working QNX pci-6402 + drivers by Greg Laird and Mariusz Bogacz. None of the code was + used directly here, but it was useful as an additional source of + documentation on how to program the boards. + + John Sims, for much testing and feedback on pcidas-4020 support. + + COMEDI - Linux Control and Measurement Device Interface + Copyright (C) 1997-8 David A. Schleef + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +************************************************************************/ + +/* + +Driver: cb_pcidas64 +Description: MeasurementComputing PCI-DAS64xx, 60XX, and 4020 series with the PLX 9080 PCI controller +Author: Frank Mori Hess +Status: works +Updated: 2002-10-09 +Devices: [Measurement Computing] PCI-DAS6402/16 (cb_pcidas64), + PCI-DAS6402/12, PCI-DAS64/M1/16, PCI-DAS64/M2/16, + PCI-DAS64/M3/16, PCI-DAS6402/16/JR, PCI-DAS64/M1/16/JR, + PCI-DAS64/M2/16/JR, PCI-DAS64/M3/16/JR, PCI-DAS64/M1/14, + PCI-DAS64/M2/14, PCI-DAS64/M3/14, PCI-DAS6013, PCI-DAS6014, + PCI-DAS6023, PCI-DAS6025, PCI-DAS6030, + PCI-DAS6031, PCI-DAS6032, PCI-DAS6033, PCI-DAS6034, + PCI-DAS6035, PCI-DAS6036, PCI-DAS6040, PCI-DAS6052, + PCI-DAS6070, PCI-DAS6071, PCI-DAS4020/12 + +Configuration options: + [0] - PCI bus of device (optional) + [1] - PCI slot of device (optional) + +These boards may be autocalibrated with the comedi_calibrate utility. + +To select the bnc trigger input on the 4020 (instead of the dio input), +specify a nonzero channel in the chanspec. If you wish to use an external +master clock on the 4020, you may do so by setting the scan_begin_src +to TRIG_OTHER, and using an INSN_CONFIG_TIMER_1 configuration insn +to configure the divisor to use for the external clock. + +Some devices are not identified because the PCI device IDs are not yet +known. If you have such a board, please file a bug report at +https://bugs.comedi.org. + +*/ + +/* + +TODO: + make it return error if user attempts an ai command that uses the + external queue, and an ao command simultaneously + user counter subdevice + there are a number of boards this driver will support when they are + fully released, but does not yet since the pci device id numbers + are not yet available. + support prescaled 100khz clock for slow pacing (not available on 6000 series?) + make ao fifo size adjustable like ai fifo +*/ + +#include "../comedidev.h" +#include +#include + +#include "comedi_pci.h" +#include "8253.h" +#include "8255.h" +#include "plx9080.h" +#include "comedi_fc.h" + +#undef PCIDAS64_DEBUG // disable debugging code +//#define PCIDAS64_DEBUG // enable debugging code + +#ifdef PCIDAS64_DEBUG +#define DEBUG_PRINT(format, args...) rt_printk(format , ## args ) +#else +#define DEBUG_PRINT(format, args...) +#endif + +#define TIMER_BASE 25 // 40MHz master clock +#define PRESCALED_TIMER_BASE 10000 // 100kHz 'prescaled' clock for slow aquisition, maybe I'll support this someday +#define DMA_BUFFER_SIZE 0x1000 + +/* maximum value that can be loaded into board's 24-bit counters*/ +static const int max_counter_value = 0xffffff; + +/* PCI-DAS64xxx base addresses */ + +// indices of base address regions +enum base_address_regions { + PLX9080_BADDRINDEX = 0, + MAIN_BADDRINDEX = 2, + DIO_COUNTER_BADDRINDEX = 3, +}; + +// priv(dev)->main_iobase registers +enum write_only_registers { + INTR_ENABLE_REG = 0x0, // interrupt enable register + HW_CONFIG_REG = 0x2, // hardware config register + DAQ_SYNC_REG = 0xc, + DAQ_ATRIG_LOW_4020_REG = 0xc, + ADC_CONTROL0_REG = 0x10, // adc control register 0 + ADC_CONTROL1_REG = 0x12, // adc control register 1 + CALIBRATION_REG = 0x14, + ADC_SAMPLE_INTERVAL_LOWER_REG = 0x16, // lower 16 bits of adc sample interval counter + ADC_SAMPLE_INTERVAL_UPPER_REG = 0x18, // upper 8 bits of adc sample interval counter + ADC_DELAY_INTERVAL_LOWER_REG = 0x1a, // lower 16 bits of delay interval counter + ADC_DELAY_INTERVAL_UPPER_REG = 0x1c, // upper 8 bits of delay interval counter + ADC_COUNT_LOWER_REG = 0x1e, // lower 16 bits of hardware conversion/scan counter + ADC_COUNT_UPPER_REG = 0x20, // upper 8 bits of hardware conversion/scan counter + ADC_START_REG = 0x22, // software trigger to start aquisition + ADC_CONVERT_REG = 0x24, // initiates single conversion + ADC_QUEUE_CLEAR_REG = 0x26, // clears adc queue + ADC_QUEUE_LOAD_REG = 0x28, // loads adc queue + ADC_BUFFER_CLEAR_REG = 0x2a, + ADC_QUEUE_HIGH_REG = 0x2c, // high channel for internal queue, use adc_chan_bits() inline above + DAC_CONTROL0_REG = 0x50, // dac control register 0 + DAC_CONTROL1_REG = 0x52, // dac control register 0 + DAC_SAMPLE_INTERVAL_LOWER_REG = 0x54, // lower 16 bits of dac sample interval counter + DAC_SAMPLE_INTERVAL_UPPER_REG = 0x56, // upper 8 bits of dac sample interval counter + DAC_SELECT_REG = 0x60, + DAC_START_REG = 0x64, + DAC_BUFFER_CLEAR_REG = 0x66, // clear dac buffer +}; +static inline unsigned int dac_convert_reg(unsigned int channel) +{ + return 0x70 + (2 * (channel & 0x1)); +} +static inline unsigned int dac_lsb_4020_reg(unsigned int channel) +{ + return 0x70 + (4 * (channel & 0x1)); +} +static inline unsigned int dac_msb_4020_reg(unsigned int channel) +{ + return 0x72 + (4 * (channel & 0x1)); +} + +enum read_only_registers { + HW_STATUS_REG = 0x0, // hardware status register, reading this apparently clears pending interrupts as well + PIPE1_READ_REG = 0x4, + ADC_READ_PNTR_REG = 0x8, + LOWER_XFER_REG = 0x10, + ADC_WRITE_PNTR_REG = 0xc, + PREPOST_REG = 0x14, +}; + +enum read_write_registers { + I8255_4020_REG = 0x48, // 8255 offset, for 4020 only + ADC_QUEUE_FIFO_REG = 0x100, // external channel/gain queue, uses same bits as ADC_QUEUE_LOAD_REG + ADC_FIFO_REG = 0x200, /* adc data fifo */ + DAC_FIFO_REG = 0x300, /* dac data fifo, has weird interactions with external channel queue */ +}; + +// priv(dev)->dio_counter_iobase registers +enum dio_counter_registers { + DIO_8255_OFFSET = 0x0, + DO_REG = 0x20, + DI_REG = 0x28, + DIO_DIRECTION_60XX_REG = 0x40, + DIO_DATA_60XX_REG = 0x48, +}; + +// bit definitions for write-only registers + +enum intr_enable_contents { + ADC_INTR_SRC_MASK = 0x3, // bits that set adc interrupt source + ADC_INTR_QFULL_BITS = 0x0, // interrupt fifo quater full + ADC_INTR_EOC_BITS = 0x1, // interrupt end of conversion + ADC_INTR_EOSCAN_BITS = 0x2, // interrupt end of scan + ADC_INTR_EOSEQ_BITS = 0x3, // interrupt end of sequence (probably wont use this it's pretty fancy) + EN_ADC_INTR_SRC_BIT = 0x4, // enable adc interrupt source + EN_ADC_DONE_INTR_BIT = 0x8, // enable adc aquisition done interrupt + DAC_INTR_SRC_MASK = 0x30, + DAC_INTR_QEMPTY_BITS = 0x0, + DAC_INTR_HIGH_CHAN_BITS = 0x10, + EN_DAC_INTR_SRC_BIT = 0x40, // enable dac interrupt source + EN_DAC_DONE_INTR_BIT = 0x80, + EN_ADC_ACTIVE_INTR_BIT = 0x200, // enable adc active interrupt + EN_ADC_STOP_INTR_BIT = 0x400, // enable adc stop trigger interrupt + EN_DAC_ACTIVE_INTR_BIT = 0x800, // enable dac active interrupt + EN_DAC_UNDERRUN_BIT = 0x4000, // enable dac underrun status bit + EN_ADC_OVERRUN_BIT = 0x8000, // enable adc overrun status bit +}; + +enum hw_config_contents { + MASTER_CLOCK_4020_MASK = 0x3, // bits that specify master clock source for 4020 + INTERNAL_CLOCK_4020_BITS = 0x1, // use 40 MHz internal master clock for 4020 + BNC_CLOCK_4020_BITS = 0x2, // use BNC input for master clock + EXT_CLOCK_4020_BITS = 0x3, // use dio input for master clock + EXT_QUEUE_BIT = 0x200, // use external channel/gain queue (more versatile than internal queue) + SLOW_DAC_BIT = 0x400, // use 225 nanosec strobe when loading dac instead of 50 nanosec + HW_CONFIG_DUMMY_BITS = 0x2000, // bit with unknown function yet given as default value in pci-das64 manual + DMA_CH_SELECT_BIT = 0x8000, // bit selects channels 1/0 for analog input/output, otherwise 0/1 + FIFO_SIZE_REG = 0x4, // allows adjustment of fifo sizes + DAC_FIFO_SIZE_MASK = 0xff00, // bits that set dac fifo size + DAC_FIFO_BITS = 0xf800, /* 8k sample ao fifo */ +}; +#define DAC_FIFO_SIZE 0x2000 + +enum daq_atrig_low_4020_contents { + EXT_AGATE_BNC_BIT = 0x8000, // use trig/ext clk bnc input for analog gate signal + EXT_STOP_TRIG_BNC_BIT = 0x4000, // use trig/ext clk bnc input for external stop trigger signal + EXT_START_TRIG_BNC_BIT = 0x2000, // use trig/ext clk bnc input for external start trigger signal +}; +static inline uint16_t analog_trig_low_threshold_bits(uint16_t threshold) +{ + return threshold & 0xfff; +} + +enum adc_control0_contents { + ADC_GATE_SRC_MASK = 0x3, // bits that select gate + ADC_SOFT_GATE_BITS = 0x1, // software gate + ADC_EXT_GATE_BITS = 0x2, // external digital gate + ADC_ANALOG_GATE_BITS = 0x3, // analog level gate + ADC_GATE_LEVEL_BIT = 0x4, // level-sensitive gate (for digital) + ADC_GATE_POLARITY_BIT = 0x8, // gate active low + ADC_START_TRIG_SOFT_BITS = 0x10, + ADC_START_TRIG_EXT_BITS = 0x20, + ADC_START_TRIG_ANALOG_BITS = 0x30, + ADC_START_TRIG_MASK = 0x30, + ADC_START_TRIG_FALLING_BIT = 0x40, // trig 1 uses falling edge + ADC_EXT_CONV_FALLING_BIT = 0x800, // external pacing uses falling edge + ADC_SAMPLE_COUNTER_EN_BIT = 0x1000, // enable hardware scan counter + ADC_DMA_DISABLE_BIT = 0x4000, // disables dma + ADC_ENABLE_BIT = 0x8000, // master adc enable +}; + +enum adc_control1_contents { + ADC_QUEUE_CONFIG_BIT = 0x1, // should be set for boards with > 16 channels + CONVERT_POLARITY_BIT = 0x10, + EOC_POLARITY_BIT = 0x20, + ADC_SW_GATE_BIT = 0x40, // software gate of adc + ADC_DITHER_BIT = 0x200, // turn on extra noise for dithering + RETRIGGER_BIT = 0x800, + ADC_LO_CHANNEL_4020_MASK = 0x300, + ADC_HI_CHANNEL_4020_MASK = 0xc00, + TWO_CHANNEL_4020_BITS = 0x1000, // two channel mode for 4020 + FOUR_CHANNEL_4020_BITS = 0x2000, // four channel mode for 4020 + CHANNEL_MODE_4020_MASK = 0x3000, + ADC_MODE_MASK = 0xf000, +}; +static inline uint16_t adc_lo_chan_4020_bits(unsigned int channel) +{ + return (channel & 0x3) << 8; +}; +static inline uint16_t adc_hi_chan_4020_bits(unsigned int channel) +{ + return (channel & 0x3) << 10; +}; +static inline uint16_t adc_mode_bits(unsigned int mode) +{ + return (mode & 0xf) << 12; +}; + +enum calibration_contents { + SELECT_8800_BIT = 0x1, + SELECT_8402_64XX_BIT = 0x2, + SELECT_1590_60XX_BIT = 0x2, + CAL_EN_64XX_BIT = 0x40, // calibration enable for 64xx series + SERIAL_DATA_IN_BIT = 0x80, + SERIAL_CLOCK_BIT = 0x100, + CAL_EN_60XX_BIT = 0x200, // calibration enable for 60xx series + CAL_GAIN_BIT = 0x800, +}; +/* calibration sources for 6025 are: + * 0 : ground + * 1 : 10V + * 2 : 5V + * 3 : 0.5V + * 4 : 0.05V + * 5 : ground + * 6 : dac channel 0 + * 7 : dac channel 1 + */ +static inline uint16_t adc_src_bits(unsigned int source) +{ + return (source & 0xf) << 3; +}; + +static inline uint16_t adc_convert_chan_4020_bits(unsigned int channel) +{ + return (channel & 0x3) << 8; +}; + +enum adc_queue_load_contents { + UNIP_BIT = 0x800, // unipolar/bipolar bit + ADC_SE_DIFF_BIT = 0x1000, // single-ended/ differential bit + ADC_COMMON_BIT = 0x2000, // non-referenced single-ended (common-mode input) + QUEUE_EOSEQ_BIT = 0x4000, // queue end of sequence + QUEUE_EOSCAN_BIT = 0x8000, // queue end of scan +}; +static inline uint16_t adc_chan_bits(unsigned int channel) +{ + return channel & 0x3f; +}; + +enum dac_control0_contents { + DAC_ENABLE_BIT = 0x8000, // dac controller enable bit + DAC_CYCLIC_STOP_BIT = 0x4000, + DAC_WAVEFORM_MODE_BIT = 0x100, + DAC_EXT_UPDATE_FALLING_BIT = 0x80, + DAC_EXT_UPDATE_ENABLE_BIT = 0x40, + WAVEFORM_TRIG_MASK = 0x30, + WAVEFORM_TRIG_DISABLED_BITS = 0x0, + WAVEFORM_TRIG_SOFT_BITS = 0x10, + WAVEFORM_TRIG_EXT_BITS = 0x20, + WAVEFORM_TRIG_ADC1_BITS = 0x30, + WAVEFORM_TRIG_FALLING_BIT = 0x8, + WAVEFORM_GATE_LEVEL_BIT = 0x4, + WAVEFORM_GATE_ENABLE_BIT = 0x2, + WAVEFORM_GATE_SELECT_BIT = 0x1, +}; + +enum dac_control1_contents { + DAC_WRITE_POLARITY_BIT = 0x800, /* board-dependent setting */ + DAC1_EXT_REF_BIT = 0x200, + DAC0_EXT_REF_BIT = 0x100, + DAC_OUTPUT_ENABLE_BIT = 0x80, // dac output enable bit + DAC_UPDATE_POLARITY_BIT = 0x40, /* board-dependent setting */ + DAC_SW_GATE_BIT = 0x20, + DAC1_UNIPOLAR_BIT = 0x8, + DAC0_UNIPOLAR_BIT = 0x2, +}; + +// bit definitions for read-only registers +enum hw_status_contents { + DAC_UNDERRUN_BIT = 0x1, + ADC_OVERRUN_BIT = 0x2, + DAC_ACTIVE_BIT = 0x4, + ADC_ACTIVE_BIT = 0x8, + DAC_INTR_PENDING_BIT = 0x10, + ADC_INTR_PENDING_BIT = 0x20, + DAC_DONE_BIT = 0x40, + ADC_DONE_BIT = 0x80, + EXT_INTR_PENDING_BIT = 0x100, + ADC_STOP_BIT = 0x200, +}; +static inline uint16_t pipe_full_bits(uint16_t hw_status_bits) +{ + return (hw_status_bits >> 10) & 0x3; +}; + +static inline unsigned int dma_chain_flag_bits(uint16_t prepost_bits) +{ + return (prepost_bits >> 6) & 0x3; +} +static inline unsigned int adc_upper_read_ptr_code(uint16_t prepost_bits) +{ + return (prepost_bits >> 12) & 0x3; +} +static inline unsigned int adc_upper_write_ptr_code(uint16_t prepost_bits) +{ + return (prepost_bits >> 14) & 0x3; +} + +// I2C addresses for 4020 +enum i2c_addresses { + RANGE_CAL_I2C_ADDR = 0x20, + CALDAC0_I2C_ADDR = 0xc, + CALDAC1_I2C_ADDR = 0xd, +}; + +enum range_cal_i2c_contents { + ADC_SRC_4020_MASK = 0x70, // bits that set what source the adc converter measures + BNC_TRIG_THRESHOLD_0V_BIT = 0x80, // make bnc trig/ext clock threshold 0V instead of 2.5V +}; +static inline uint8_t adc_src_4020_bits(unsigned int source) +{ + return (source << 4) & ADC_SRC_4020_MASK; +}; +static inline uint8_t attenuate_bit(unsigned int channel) +{ + // attenuate channel (+-5V input range) + return 1 << (channel & 0x3); +}; + +// analog input ranges for 64xx boards +static const comedi_lrange ai_ranges_64xx = { + 8, + { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25) + } +}; + +/* analog input ranges for 60xx boards */ +static const comedi_lrange ai_ranges_60xx = { + 4, + { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(0.5), + BIP_RANGE(0.05), + } +}; + +/* analog input ranges for 6030, etc boards */ +static const comedi_lrange ai_ranges_6030 = { + 14, + { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2), + BIP_RANGE(1), + BIP_RANGE(0.5), + BIP_RANGE(0.2), + BIP_RANGE(0.1), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2), + UNI_RANGE(1), + UNI_RANGE(0.5), + UNI_RANGE(0.2), + UNI_RANGE(0.1), + } +}; + +/* analog input ranges for 6052, etc boards */ +static const comedi_lrange ai_ranges_6052 = { + 15, + { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1), + BIP_RANGE(0.5), + BIP_RANGE(0.25), + BIP_RANGE(0.1), + BIP_RANGE(0.05), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2), + UNI_RANGE(1), + UNI_RANGE(0.5), + UNI_RANGE(0.2), + UNI_RANGE(0.1), + } +}; + +// analog input ranges for 4020 board +static const comedi_lrange ai_ranges_4020 = { + 2, + { + BIP_RANGE(5), + BIP_RANGE(1), + } +}; + +// analog output ranges +static const comedi_lrange ao_ranges_64xx = { + 4, + { + BIP_RANGE(5), + BIP_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(10), + } +}; +static const int ao_range_code_64xx[] = { + 0x0, + 0x1, + 0x2, + 0x3, +}; + +static const comedi_lrange ao_ranges_60xx = { + 1, + { + BIP_RANGE(10), + } +}; +static const int ao_range_code_60xx[] = { + 0x0, +}; + +static const comedi_lrange ao_ranges_6030 = { + 2, + { + BIP_RANGE(10), + UNI_RANGE(10), + } +}; +static const int ao_range_code_6030[] = { + 0x0, + 0x2, +}; + +static const comedi_lrange ao_ranges_4020 = { + 2, + { + BIP_RANGE(5), + BIP_RANGE(10), + } +}; +static const int ao_range_code_4020[] = { + 0x1, + 0x0, +}; + +enum register_layout { + LAYOUT_60XX, + LAYOUT_64XX, + LAYOUT_4020, +}; + +typedef struct hw_fifo_info_struct { + unsigned int num_segments; + unsigned int max_segment_length; + unsigned int sample_packing_ratio; + uint16_t fifo_size_reg_mask; +} hw_fifo_info_t; + +typedef struct pcidas64_board_struct { + const char *name; + int device_id; // pci device id + int ai_se_chans; // number of ai inputs in single-ended mode + int ai_bits; // analog input resolution + int ai_speed; // fastest conversion period in ns + const comedi_lrange *ai_range_table; + int ao_nchan; // number of analog out channels + int ao_bits; // analog output resolution + int ao_scan_speed; // analog output speed (for a scan, not conversion) + const comedi_lrange *ao_range_table; + const int *ao_range_code; + const hw_fifo_info_t *const ai_fifo; + enum register_layout layout; // different board families have slightly different registers + unsigned has_8255:1; +} pcidas64_board; + +static const hw_fifo_info_t ai_fifo_4020 = { + num_segments:2, + max_segment_length:0x8000, + sample_packing_ratio:2, + fifo_size_reg_mask:0x7f, +}; + +static const hw_fifo_info_t ai_fifo_64xx = { + num_segments:4, + max_segment_length:0x800, + sample_packing_ratio:1, + fifo_size_reg_mask:0x3f, +}; + +static const hw_fifo_info_t ai_fifo_60xx = { + num_segments:4, + max_segment_length:0x800, + sample_packing_ratio:1, + fifo_size_reg_mask:0x7f, +}; + +/* maximum number of dma transfers we will chain together into a ring + * (and the maximum number of dma buffers we maintain) */ +#define MAX_AI_DMA_RING_COUNT (0x80000 / DMA_BUFFER_SIZE) +#define MIN_AI_DMA_RING_COUNT (0x10000 / DMA_BUFFER_SIZE) +#define AO_DMA_RING_COUNT (0x10000 / DMA_BUFFER_SIZE) +static inline unsigned int ai_dma_ring_count(pcidas64_board * board) +{ + if (board->layout == LAYOUT_4020) + return MAX_AI_DMA_RING_COUNT; + else + return MIN_AI_DMA_RING_COUNT; +} + +static const int bytes_in_sample = 2; + +static const pcidas64_board pcidas64_boards[] = { + { + name: "pci-das6402/16", + device_id:0x1d, + ai_se_chans:64, + ai_bits: 16, + ai_speed:5000, + ao_nchan:2, + ao_bits: 16, + ao_scan_speed:10000, + layout: LAYOUT_64XX, + ai_range_table:&ai_ranges_64xx, + ao_range_table:&ao_ranges_64xx, + ao_range_code:ao_range_code_64xx, + ai_fifo: &ai_fifo_64xx, + has_8255:1, + }, + { + name: "pci-das6402/12", // XXX check + device_id:0x1e, + ai_se_chans:64, + ai_bits: 12, + ai_speed:5000, + ao_nchan:2, + ao_bits: 12, + ao_scan_speed:10000, + layout: LAYOUT_64XX, + ai_range_table:&ai_ranges_64xx, + ao_range_table:&ao_ranges_64xx, + ao_range_code:ao_range_code_64xx, + ai_fifo: &ai_fifo_64xx, + has_8255:1, + }, + { + name: "pci-das64/m1/16", + device_id:0x35, + ai_se_chans:64, + ai_bits: 16, + ai_speed:1000, + ao_nchan:2, + ao_bits: 16, + ao_scan_speed:10000, + layout: LAYOUT_64XX, + ai_range_table:&ai_ranges_64xx, + ao_range_table:&ao_ranges_64xx, + ao_range_code:ao_range_code_64xx, + ai_fifo: &ai_fifo_64xx, + has_8255:1, + }, + { + name: "pci-das64/m2/16", + device_id:0x36, + ai_se_chans:64, + ai_bits: 16, + ai_speed:500, + ao_nchan:2, + ao_bits: 16, + ao_scan_speed:10000, + layout: LAYOUT_64XX, + ai_range_table:&ai_ranges_64xx, + ao_range_table:&ao_ranges_64xx, + ao_range_code:ao_range_code_64xx, + ai_fifo: &ai_fifo_64xx, + has_8255:1, + }, + { + name: "pci-das64/m3/16", + device_id:0x37, + ai_se_chans:64, + ai_bits: 16, + ai_speed:333, + ao_nchan:2, + ao_bits: 16, + ao_scan_speed:10000, + layout: LAYOUT_64XX, + ai_range_table:&ai_ranges_64xx, + ao_range_table:&ao_ranges_64xx, + ao_range_code:ao_range_code_64xx, + ai_fifo: &ai_fifo_64xx, + has_8255:1, + }, + { + .name = "pci-das6013", + .device_id = 0x78, + .ai_se_chans = 16, + .ai_bits = 16, + .ai_speed = 5000, + .ao_nchan = 0, + .ao_bits = 16, + .layout = LAYOUT_60XX, + .ai_range_table = &ai_ranges_60xx, + .ao_range_table = &ao_ranges_60xx, + .ao_range_code = ao_range_code_60xx, + .ai_fifo = &ai_fifo_60xx, + .has_8255 = 0, + }, + { + name: "pci-das6014", + device_id:0x79, + ai_se_chans:16, + ai_bits: 16, + ai_speed:5000, + ao_nchan:2, + ao_bits: 16, + ao_scan_speed:100000, + layout: LAYOUT_60XX, + ai_range_table:&ai_ranges_60xx, + ao_range_table:&ao_ranges_60xx, + ao_range_code:ao_range_code_60xx, + ai_fifo: &ai_fifo_60xx, + has_8255:0, + }, + { + name: "pci-das6023", + device_id:0x5d, + ai_se_chans:16, + ai_bits: 12, + ai_speed:5000, + ao_nchan:0, + ao_scan_speed:100000, + layout: LAYOUT_60XX, + ai_range_table:&ai_ranges_60xx, + ao_range_table:&ao_ranges_60xx, + ao_range_code:ao_range_code_60xx, + ai_fifo: &ai_fifo_60xx, + has_8255:1, + }, + { + name: "pci-das6025", + device_id:0x5e, + ai_se_chans:16, + ai_bits: 12, + ai_speed:5000, + ao_nchan:2, + ao_bits: 12, + ao_scan_speed:100000, + layout: LAYOUT_60XX, + ai_range_table:&ai_ranges_60xx, + ao_range_table:&ao_ranges_60xx, + ao_range_code:ao_range_code_60xx, + ai_fifo: &ai_fifo_60xx, + has_8255:1, + }, + { + name: "pci-das6030", + device_id:0x5f, + ai_se_chans:16, + ai_bits: 16, + ai_speed:10000, + ao_nchan:2, + ao_bits: 16, + ao_scan_speed:10000, + layout: LAYOUT_60XX, + ai_range_table:&ai_ranges_6030, + ao_range_table:&ao_ranges_6030, + ao_range_code:ao_range_code_6030, + ai_fifo: &ai_fifo_60xx, + has_8255:0, + }, + { + name: "pci-das6031", + device_id:0x60, + ai_se_chans:64, + ai_bits: 16, + ai_speed:10000, + ao_nchan:2, + ao_bits: 16, + ao_scan_speed:10000, + layout: LAYOUT_60XX, + ai_range_table:&ai_ranges_6030, + ao_range_table:&ao_ranges_6030, + ao_range_code:ao_range_code_6030, + ai_fifo: &ai_fifo_60xx, + has_8255:0, + }, + { + name: "pci-das6032", + device_id:0x61, + ai_se_chans:16, + ai_bits: 16, + ai_speed:10000, + ao_nchan:0, + layout: LAYOUT_60XX, + ai_range_table:&ai_ranges_6030, + ai_fifo: &ai_fifo_60xx, + has_8255:0, + }, + { + name: "pci-das6033", + device_id:0x62, + ai_se_chans:64, + ai_bits: 16, + ai_speed:10000, + ao_nchan:0, + layout: LAYOUT_60XX, + ai_range_table:&ai_ranges_6030, + ai_fifo: &ai_fifo_60xx, + has_8255:0, + }, + { + name: "pci-das6034", + device_id:0x63, + ai_se_chans:16, + ai_bits: 16, + ai_speed:5000, + ao_nchan:0, + ao_scan_speed:0, + layout: LAYOUT_60XX, + ai_range_table:&ai_ranges_60xx, + ai_fifo: &ai_fifo_60xx, + has_8255:0, + }, + { + name: "pci-das6035", + device_id:0x64, + ai_se_chans:16, + ai_bits: 16, + ai_speed:5000, + ao_nchan:2, + ao_bits: 12, + ao_scan_speed:100000, + layout: LAYOUT_60XX, + ai_range_table:&ai_ranges_60xx, + ao_range_table:&ao_ranges_60xx, + ao_range_code:ao_range_code_60xx, + ai_fifo: &ai_fifo_60xx, + has_8255:0, + }, + { + name: "pci-das6036", + device_id:0x6f, + ai_se_chans:16, + ai_bits: 16, + ai_speed:5000, + ao_nchan:2, + ao_bits: 16, + ao_scan_speed:100000, + layout: LAYOUT_60XX, + ai_range_table:&ai_ranges_60xx, + ao_range_table:&ao_ranges_60xx, + ao_range_code:ao_range_code_60xx, + ai_fifo: &ai_fifo_60xx, + has_8255:0, + }, + { + name: "pci-das6040", + device_id:0x65, + ai_se_chans:16, + ai_bits: 12, + ai_speed:2000, + ao_nchan:2, + ao_bits: 12, + ao_scan_speed:1000, + layout: LAYOUT_60XX, + ai_range_table:&ai_ranges_6052, + ao_range_table:&ao_ranges_6030, + ao_range_code:ao_range_code_6030, + ai_fifo: &ai_fifo_60xx, + has_8255:0, + }, + { + name: "pci-das6052", + device_id:0x66, + ai_se_chans:16, + ai_bits: 16, + ai_speed:3333, + ao_nchan:2, + ao_bits: 16, + ao_scan_speed:3333, + layout: LAYOUT_60XX, + ai_range_table:&ai_ranges_6052, + ao_range_table:&ao_ranges_6030, + ao_range_code:ao_range_code_6030, + ai_fifo: &ai_fifo_60xx, + has_8255:0, + }, + { + name: "pci-das6070", + device_id:0x67, + ai_se_chans:16, + ai_bits: 12, + ai_speed:800, + ao_nchan:2, + ao_bits: 12, + ao_scan_speed:1000, + layout: LAYOUT_60XX, + ai_range_table:&ai_ranges_6052, + ao_range_table:&ao_ranges_6030, + ao_range_code:ao_range_code_6030, + ai_fifo: &ai_fifo_60xx, + has_8255:0, + }, + { + name: "pci-das6071", + device_id:0x68, + ai_se_chans:64, + ai_bits: 12, + ai_speed:800, + ao_nchan:2, + ao_bits: 12, + ao_scan_speed:1000, + layout: LAYOUT_60XX, + ai_range_table:&ai_ranges_6052, + ao_range_table:&ao_ranges_6030, + ao_range_code:ao_range_code_6030, + ai_fifo: &ai_fifo_60xx, + has_8255:0, + }, + { + name: "pci-das4020/12", + device_id:0x52, + ai_se_chans:4, + ai_bits: 12, + ai_speed:50, + ao_bits: 12, + ao_nchan:2, + ao_scan_speed:0, // no hardware pacing on ao + layout: LAYOUT_4020, + ai_range_table:&ai_ranges_4020, + ao_range_table:&ao_ranges_4020, + ao_range_code:ao_range_code_4020, + ai_fifo: &ai_fifo_4020, + has_8255:1, + }, +#if 0 + { + name: "pci-das6402/16/jr", + device_id:0 // XXX, + ai_se_chans:64, + ai_bits: 16, + ai_speed:5000, + ao_nchan:0, + ao_scan_speed:10000, + layout: LAYOUT_64XX, + ai_range_table:&ai_ranges_64xx, + ai_fifo: ai_fifo_64xx, + has_8255:1, + }, + { + name: "pci-das64/m1/16/jr", + device_id:0 // XXX, + ai_se_chans:64, + ai_bits: 16, + ai_speed:1000, + ao_nchan:0, + ao_scan_speed:10000, + layout: LAYOUT_64XX, + ai_range_table:&ai_ranges_64xx, + ai_fifo: ai_fifo_64xx, + has_8255:1, + }, + { + name: "pci-das64/m2/16/jr", + device_id:0 // XXX, + ai_se_chans:64, + ai_bits: 16, + ai_speed:500, + ao_nchan:0, + ao_scan_speed:10000, + layout: LAYOUT_64XX, + ai_range_table:&ai_ranges_64xx, + ai_fifo: ai_fifo_64xx, + has_8255:1, + }, + { + name: "pci-das64/m3/16/jr", + device_id:0 // XXX, + ai_se_chans:64, + ai_bits: 16, + ai_speed:333, + ao_nchan:0, + ao_scan_speed:10000, + layout: LAYOUT_64XX, + ai_range_table:&ai_ranges_64xx, + ai_fifo: ai_fifo_64xx, + has_8255:1, + }, + { + name: "pci-das64/m1/14", + device_id:0, // XXX + ai_se_chans:64, + ai_bits: 14, + ai_speed:1000, + ao_nchan:2, + ao_scan_speed:10000, + layout: LAYOUT_64XX, + ai_range_table:&ai_ranges_64xx, + ai_fifo: ai_fifo_64xx, + has_8255:1, + }, + { + name: "pci-das64/m2/14", + device_id:0, // XXX + ai_se_chans:64, + ai_bits: 14, + ai_speed:500, + ao_nchan:2, + ao_scan_speed:10000, + layout: LAYOUT_64XX, + ai_range_table:&ai_ranges_64xx, + ai_fifo: ai_fifo_64xx, + has_8255:1, + }, + { + name: "pci-das64/m3/14", + device_id:0, // XXX + ai_se_chans:64, + ai_bits: 14, + ai_speed:333, + ao_nchan:2, + ao_scan_speed:10000, + layout: LAYOUT_64XX, + ai_range_table:&ai_ranges_64xx, + ai_fifo: ai_fifo_64xx, + has_8255:1, + }, +#endif +}; + +// Number of boards in cb_pcidas_boards +static inline unsigned int num_boards(void) +{ + return sizeof(pcidas64_boards) / sizeof(pcidas64_board); +} + +static DEFINE_PCI_DEVICE_TABLE(pcidas64_pci_table) = { + {PCI_VENDOR_ID_COMPUTERBOARDS, 0x001d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_COMPUTERBOARDS, 0x001e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_COMPUTERBOARDS, 0x0035, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_COMPUTERBOARDS, 0x0036, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_COMPUTERBOARDS, 0x0037, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_COMPUTERBOARDS, 0x0052, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_COMPUTERBOARDS, 0x005d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_COMPUTERBOARDS, 0x005e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_COMPUTERBOARDS, 0x005f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_COMPUTERBOARDS, 0x0061, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_COMPUTERBOARDS, 0x0062, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_COMPUTERBOARDS, 0x0063, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_COMPUTERBOARDS, 0x0064, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_COMPUTERBOARDS, 0x0066, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_COMPUTERBOARDS, 0x0067, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_COMPUTERBOARDS, 0x0068, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_COMPUTERBOARDS, 0x006f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_COMPUTERBOARDS, 0x0078, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_COMPUTERBOARDS, 0x0079, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0} +}; + +MODULE_DEVICE_TABLE(pci, pcidas64_pci_table); + +static inline pcidas64_board *board(const comedi_device * dev) +{ + return (pcidas64_board *) dev->board_ptr; +} + +static inline unsigned short se_diff_bit_6xxx(comedi_device * dev, + int use_differential) +{ + if ((board(dev)->layout == LAYOUT_64XX && !use_differential) || + (board(dev)->layout == LAYOUT_60XX && use_differential)) + return ADC_SE_DIFF_BIT; + else + return 0; +}; + +struct ext_clock_info { + unsigned int divisor; // master clock divisor to use for scans with external master clock + unsigned int chanspec; // chanspec for master clock input when used as scan begin src +}; + +/* this structure is for data unique to this hardware driver. */ +typedef struct { + struct pci_dev *hw_dev; // pointer to board's pci_dev struct + // base addresses (physical) + resource_size_t plx9080_phys_iobase; + resource_size_t main_phys_iobase; + resource_size_t dio_counter_phys_iobase; + // base addresses (ioremapped) + void *plx9080_iobase; + void *main_iobase; + void *dio_counter_iobase; + // local address (used by dma controller) + uint32_t local0_iobase; + uint32_t local1_iobase; + volatile unsigned int ai_count; // number of analog input samples remaining + uint16_t *ai_buffer[MAX_AI_DMA_RING_COUNT]; // dma buffers for analog input + dma_addr_t ai_buffer_bus_addr[MAX_AI_DMA_RING_COUNT]; // physical addresses of ai dma buffers + struct plx_dma_desc *ai_dma_desc; // array of ai dma descriptors read by plx9080, allocated to get proper alignment + dma_addr_t ai_dma_desc_bus_addr; // physical address of ai dma descriptor array + volatile unsigned int ai_dma_index; // index of the ai dma descriptor/buffer that is currently being used + uint16_t *ao_buffer[AO_DMA_RING_COUNT]; // dma buffers for analog output + dma_addr_t ao_buffer_bus_addr[AO_DMA_RING_COUNT]; // physical addresses of ao dma buffers + struct plx_dma_desc *ao_dma_desc; + dma_addr_t ao_dma_desc_bus_addr; + volatile unsigned int ao_dma_index; // keeps track of buffer where the next ao sample should go + volatile unsigned long ao_count; // number of analog output samples remaining + volatile unsigned int ao_value[2]; // remember what the analog outputs are set to, to allow readback + unsigned int hw_revision; // stc chip hardware revision number + volatile unsigned int intr_enable_bits; // last bits sent to INTR_ENABLE_REG register + volatile uint16_t adc_control1_bits; // last bits sent to ADC_CONTROL1_REG register + volatile uint16_t fifo_size_bits; // last bits sent to FIFO_SIZE_REG register + volatile uint16_t hw_config_bits; // last bits sent to HW_CONFIG_REG register + volatile uint16_t dac_control1_bits; + volatile uint32_t plx_control_bits; // last bits written to plx9080 control register + volatile uint32_t plx_intcsr_bits; // last bits written to plx interrupt control and status register + volatile int calibration_source; // index of calibration source readable through ai ch0 + volatile uint8_t i2c_cal_range_bits; // bits written to i2c calibration/range register + volatile unsigned int ext_trig_falling; // configure digital triggers to trigger on falling edge + // states of various devices stored to enable read-back + unsigned int ad8402_state[2]; + unsigned int caldac_state[8]; + volatile short ai_cmd_running; + unsigned int ai_fifo_segment_length; + struct ext_clock_info ext_clock; + sampl_t ao_bounce_buffer[DAC_FIFO_SIZE]; +} pcidas64_private; + +/* inline function that makes it easier to + * access the private structure. + */ +static inline pcidas64_private *priv(comedi_device * dev) +{ + return dev->private; +} + +/* + * The comedi_driver structure tells the Comedi core module + * which functions to call to configure/deconfigure (attach/detach) + * the board, and also about the kernel module that contains + * the device code. + */ +static int attach(comedi_device * dev, comedi_devconfig * it); +static int detach(comedi_device * dev); +static comedi_driver driver_cb_pcidas = { + driver_name:"cb_pcidas64", + module:THIS_MODULE, + attach:attach, + detach:detach, +}; + +static int ai_rinsn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int ai_config_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int ao_winsn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int ao_readback_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int ai_cmd(comedi_device * dev, comedi_subdevice * s); +static int ai_cmdtest(comedi_device * dev, comedi_subdevice * s, + comedi_cmd * cmd); +static int ao_cmd(comedi_device * dev, comedi_subdevice * s); +static int ao_inttrig(comedi_device * dev, comedi_subdevice * subdev, + unsigned int trig_num); +static int ao_cmdtest(comedi_device * dev, comedi_subdevice * s, + comedi_cmd * cmd); +static irqreturn_t handle_interrupt(int irq, void *d PT_REGS_ARG); +static int ai_cancel(comedi_device * dev, comedi_subdevice * s); +static int ao_cancel(comedi_device * dev, comedi_subdevice * s); +static int dio_callback(int dir, int port, int data, unsigned long arg); +static int dio_callback_4020(int dir, int port, int data, unsigned long arg); +static int di_rbits(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int do_wbits(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int dio_60xx_config_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int dio_60xx_wbits(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int calib_read_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int calib_write_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int ad8402_read_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static void ad8402_write(comedi_device * dev, unsigned int channel, + unsigned int value); +static int ad8402_write_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int eeprom_read_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static void check_adc_timing(comedi_device * dev, comedi_cmd * cmd); +static unsigned int get_divisor(unsigned int ns, unsigned int flags); +static void i2c_write(comedi_device * dev, unsigned int address, + const uint8_t * data, unsigned int length); +static void caldac_write(comedi_device * dev, unsigned int channel, + unsigned int value); +static int caldac_8800_write(comedi_device * dev, unsigned int address, + uint8_t value); +//static int dac_1590_write(comedi_device *dev, unsigned int dac_a, unsigned int dac_b); +static int caldac_i2c_write(comedi_device * dev, unsigned int caldac_channel, + unsigned int value); +static void abort_dma(comedi_device * dev, unsigned int channel); +static void disable_plx_interrupts(comedi_device * dev); +static int set_ai_fifo_size(comedi_device * dev, unsigned int num_samples); +static unsigned int ai_fifo_size(comedi_device * dev); +static int set_ai_fifo_segment_length(comedi_device * dev, + unsigned int num_entries); +static void disable_ai_pacing(comedi_device * dev); +static void disable_ai_interrupts(comedi_device * dev); +static void enable_ai_interrupts(comedi_device * dev, const comedi_cmd * cmd); +static unsigned int get_ao_divisor(unsigned int ns, unsigned int flags); +static void load_ao_dma(comedi_device * dev, const comedi_cmd * cmd); + +COMEDI_PCI_INITCLEANUP(driver_cb_pcidas, pcidas64_pci_table); + +static unsigned int ai_range_bits_6xxx(const comedi_device * dev, + unsigned int range_index) +{ + const comedi_krange *range = + &board(dev)->ai_range_table->range[range_index]; + unsigned int bits = 0; + + switch (range->max) { + case 10000000: + bits = 0x000; + break; + case 5000000: + bits = 0x100; + break; + case 2000000: + case 2500000: + bits = 0x200; + break; + case 1000000: + case 1250000: + bits = 0x300; + break; + case 500000: + bits = 0x400; + break; + case 200000: + case 250000: + bits = 0x500; + break; + case 100000: + bits = 0x600; + break; + case 50000: + bits = 0x700; + break; + default: + comedi_error(dev, "bug! in ai_range_bits_6xxx"); + break; + } + if (range->min == 0) + bits += 0x900; + return bits; +} + +static unsigned int hw_revision(const comedi_device * dev, + uint16_t hw_status_bits) +{ + if (board(dev)->layout == LAYOUT_4020) + return (hw_status_bits >> 13) & 0x7; + + return (hw_status_bits >> 12) & 0xf; +} + +static void set_dac_range_bits(comedi_device * dev, volatile uint16_t * bits, + unsigned int channel, unsigned int range) +{ + unsigned int code = board(dev)->ao_range_code[range]; + + if (channel > 1) + comedi_error(dev, "bug! bad channel?"); + if (code & ~0x3) + comedi_error(dev, "bug! bad range code?"); + + *bits &= ~(0x3 << (2 * channel)); + *bits |= code << (2 * channel); +}; + +static inline int ao_cmd_is_supported(const pcidas64_board * board) +{ + return board->ao_nchan && board->layout != LAYOUT_4020; +} + +// initialize plx9080 chip +static void init_plx9080(comedi_device * dev) +{ + uint32_t bits; + void *plx_iobase = priv(dev)->plx9080_iobase; + + priv(dev)->plx_control_bits = + readl(priv(dev)->plx9080_iobase + PLX_CONTROL_REG); + + // plx9080 dump + DEBUG_PRINT(" plx interrupt status 0x%x\n", + readl(plx_iobase + PLX_INTRCS_REG)); + DEBUG_PRINT(" plx id bits 0x%x\n", readl(plx_iobase + PLX_ID_REG)); + DEBUG_PRINT(" plx control reg 0x%x\n", priv(dev)->plx_control_bits); + DEBUG_PRINT(" plx mode/arbitration reg 0x%x\n", + readl(plx_iobase + PLX_MARB_REG)); + DEBUG_PRINT(" plx region0 reg 0x%x\n", + readl(plx_iobase + PLX_REGION0_REG)); + DEBUG_PRINT(" plx region1 reg 0x%x\n", + readl(plx_iobase + PLX_REGION1_REG)); + + DEBUG_PRINT(" plx revision 0x%x\n", + readl(plx_iobase + PLX_REVISION_REG)); + DEBUG_PRINT(" plx dma channel 0 mode 0x%x\n", + readl(plx_iobase + PLX_DMA0_MODE_REG)); + DEBUG_PRINT(" plx dma channel 1 mode 0x%x\n", + readl(plx_iobase + PLX_DMA1_MODE_REG)); + DEBUG_PRINT(" plx dma channel 0 pci address 0x%x\n", + readl(plx_iobase + PLX_DMA0_PCI_ADDRESS_REG)); + DEBUG_PRINT(" plx dma channel 0 local address 0x%x\n", + readl(plx_iobase + PLX_DMA0_LOCAL_ADDRESS_REG)); + DEBUG_PRINT(" plx dma channel 0 transfer size 0x%x\n", + readl(plx_iobase + PLX_DMA0_TRANSFER_SIZE_REG)); + DEBUG_PRINT(" plx dma channel 0 descriptor 0x%x\n", + readl(plx_iobase + PLX_DMA0_DESCRIPTOR_REG)); + DEBUG_PRINT(" plx dma channel 0 command status 0x%x\n", + readb(plx_iobase + PLX_DMA0_CS_REG)); + DEBUG_PRINT(" plx dma channel 0 threshold 0x%x\n", + readl(plx_iobase + PLX_DMA0_THRESHOLD_REG)); + DEBUG_PRINT(" plx bigend 0x%x\n", readl(plx_iobase + PLX_BIGEND_REG)); + +#ifdef __BIG_ENDIAN + bits = BIGEND_DMA0 | BIGEND_DMA1; +#else + bits = 0; +#endif + writel(bits, priv(dev)->plx9080_iobase + PLX_BIGEND_REG); + + disable_plx_interrupts(dev); + + abort_dma(dev, 0); + abort_dma(dev, 1); + + // configure dma0 mode + bits = 0; + // enable ready input, not sure if this is necessary + bits |= PLX_DMA_EN_READYIN_BIT; + // enable bterm, not sure if this is necessary + bits |= PLX_EN_BTERM_BIT; + // enable dma chaining + bits |= PLX_EN_CHAIN_BIT; + // enable interrupt on dma done (probably don't need this, since chain never finishes) + bits |= PLX_EN_DMA_DONE_INTR_BIT; + // don't increment local address during transfers (we are transferring from a fixed fifo register) + bits |= PLX_LOCAL_ADDR_CONST_BIT; + // route dma interrupt to pci bus + bits |= PLX_DMA_INTR_PCI_BIT; + // enable demand mode + bits |= PLX_DEMAND_MODE_BIT; + // enable local burst mode + bits |= PLX_DMA_LOCAL_BURST_EN_BIT; + // 4020 uses 32 bit dma + if (board(dev)->layout == LAYOUT_4020) { + bits |= PLX_LOCAL_BUS_32_WIDE_BITS; + } else { // localspace0 bus is 16 bits wide + bits |= PLX_LOCAL_BUS_16_WIDE_BITS; + } + writel(bits, plx_iobase + PLX_DMA1_MODE_REG); + if (ao_cmd_is_supported(board(dev))) + writel(bits, plx_iobase + PLX_DMA0_MODE_REG); + + // enable interrupts on plx 9080 + priv(dev)->plx_intcsr_bits |= + ICS_AERR | ICS_PERR | ICS_PIE | ICS_PLIE | ICS_PAIE | ICS_LIE | + ICS_DMA0_E | ICS_DMA1_E; + writel(priv(dev)->plx_intcsr_bits, + priv(dev)->plx9080_iobase + PLX_INTRCS_REG); +} + +/* Allocate and initialize the subdevice structures. + */ +static int setup_subdevices(comedi_device * dev) +{ + comedi_subdevice *s; + void *dio_8255_iobase; + int i; + + if (alloc_subdevices(dev, 10) < 0) + return -ENOMEM; + + s = dev->subdevices + 0; + /* analog input subdevice */ + dev->read_subdev = s; + s->type = COMEDI_SUBD_AI; + s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DITHER | SDF_CMD_READ; + if (board(dev)->layout == LAYOUT_60XX) + s->subdev_flags |= SDF_COMMON | SDF_DIFF; + else if (board(dev)->layout == LAYOUT_64XX) + s->subdev_flags |= SDF_DIFF; + /* XXX Number of inputs in differential mode is ignored */ + s->n_chan = board(dev)->ai_se_chans; + s->len_chanlist = 0x2000; + s->maxdata = (1 << board(dev)->ai_bits) - 1; + s->range_table = board(dev)->ai_range_table; + s->insn_read = ai_rinsn; + s->insn_config = ai_config_insn; + s->do_cmd = ai_cmd; + s->do_cmdtest = ai_cmdtest; + s->cancel = ai_cancel; + if (board(dev)->layout == LAYOUT_4020) { + unsigned int i; + uint8_t data; + // set adc to read from inputs (not internal calibration sources) + priv(dev)->i2c_cal_range_bits = adc_src_4020_bits(4); + // set channels to +-5 volt input ranges + for (i = 0; i < s->n_chan; i++) + priv(dev)->i2c_cal_range_bits |= attenuate_bit(i); + data = priv(dev)->i2c_cal_range_bits; + i2c_write(dev, RANGE_CAL_I2C_ADDR, &data, sizeof(data)); + } + + /* analog output subdevice */ + s = dev->subdevices + 1; + if (board(dev)->ao_nchan) { + s->type = COMEDI_SUBD_AO; + s->subdev_flags = + SDF_READABLE | SDF_WRITABLE | SDF_GROUND | + SDF_CMD_WRITE; + s->n_chan = board(dev)->ao_nchan; + s->maxdata = (1 << board(dev)->ao_bits) - 1; + s->range_table = board(dev)->ao_range_table; + s->insn_read = ao_readback_insn; + s->insn_write = ao_winsn; + if (ao_cmd_is_supported(board(dev))) { + dev->write_subdev = s; + s->do_cmdtest = ao_cmdtest; + s->do_cmd = ao_cmd; + s->len_chanlist = board(dev)->ao_nchan; + s->cancel = ao_cancel; + } + } else { + s->type = COMEDI_SUBD_UNUSED; + } + + // digital input + s = dev->subdevices + 2; + if (board(dev)->layout == LAYOUT_64XX) { + s->type = COMEDI_SUBD_DI; + s->subdev_flags = SDF_READABLE; + s->n_chan = 4; + s->maxdata = 1; + s->range_table = &range_digital; + s->insn_bits = di_rbits; + } else + s->type = COMEDI_SUBD_UNUSED; + + // digital output + if (board(dev)->layout == LAYOUT_64XX) { + s = dev->subdevices + 3; + s->type = COMEDI_SUBD_DO; + s->subdev_flags = SDF_WRITABLE | SDF_READABLE; + s->n_chan = 4; + s->maxdata = 1; + s->range_table = &range_digital; + s->insn_bits = do_wbits; + } else + s->type = COMEDI_SUBD_UNUSED; + + /* 8255 */ + s = dev->subdevices + 4; + if (board(dev)->has_8255) { + if (board(dev)->layout == LAYOUT_4020) { + dio_8255_iobase = + priv(dev)->main_iobase + I8255_4020_REG; + subdev_8255_init(dev, s, dio_callback_4020, + (unsigned long)dio_8255_iobase); + } else { + dio_8255_iobase = + priv(dev)->dio_counter_iobase + DIO_8255_OFFSET; + subdev_8255_init(dev, s, dio_callback, + (unsigned long)dio_8255_iobase); + } + } else + s->type = COMEDI_SUBD_UNUSED; + + // 8 channel dio for 60xx + s = dev->subdevices + 5; + if (board(dev)->layout == LAYOUT_60XX) { + s->type = COMEDI_SUBD_DIO; + s->subdev_flags = SDF_WRITABLE | SDF_READABLE; + s->n_chan = 8; + s->maxdata = 1; + s->range_table = &range_digital; + s->insn_config = dio_60xx_config_insn; + s->insn_bits = dio_60xx_wbits; + } else + s->type = COMEDI_SUBD_UNUSED; + + // caldac + s = dev->subdevices + 6; + s->type = COMEDI_SUBD_CALIB; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL; + s->n_chan = 8; + if (board(dev)->layout == LAYOUT_4020) + s->maxdata = 0xfff; + else + s->maxdata = 0xff; + s->insn_read = calib_read_insn; + s->insn_write = calib_write_insn; + for (i = 0; i < s->n_chan; i++) + caldac_write(dev, i, s->maxdata / 2); + + // 2 channel ad8402 potentiometer + s = dev->subdevices + 7; + if (board(dev)->layout == LAYOUT_64XX) { + s->type = COMEDI_SUBD_CALIB; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_INTERNAL; + s->n_chan = 2; + s->insn_read = ad8402_read_insn; + s->insn_write = ad8402_write_insn; + s->maxdata = 0xff; + for (i = 0; i < s->n_chan; i++) + ad8402_write(dev, i, s->maxdata / 2); + } else + s->type = COMEDI_SUBD_UNUSED; + + //serial EEPROM, if present + s = dev->subdevices + 8; + if (readl(priv(dev)->plx9080_iobase + PLX_CONTROL_REG) & CTL_EECHK) { + s->type = COMEDI_SUBD_MEMORY; + s->subdev_flags = SDF_READABLE | SDF_INTERNAL; + s->n_chan = 128; + s->maxdata = 0xffff; + s->insn_read = eeprom_read_insn; + } else + s->type = COMEDI_SUBD_UNUSED; + + // user counter subd XXX + s = dev->subdevices + 9; + s->type = COMEDI_SUBD_UNUSED; + + return 0; +} + +static void disable_plx_interrupts(comedi_device * dev) +{ + priv(dev)->plx_intcsr_bits = 0; + writel(priv(dev)->plx_intcsr_bits, + priv(dev)->plx9080_iobase + PLX_INTRCS_REG); +} + +static void init_stc_registers(comedi_device * dev) +{ + uint16_t bits; + unsigned long flags; + + comedi_spin_lock_irqsave(&dev->spinlock, flags); + + // bit should be set for 6025, although docs say boards with <= 16 chans should be cleared XXX + if (1) + priv(dev)->adc_control1_bits |= ADC_QUEUE_CONFIG_BIT; + writew(priv(dev)->adc_control1_bits, + priv(dev)->main_iobase + ADC_CONTROL1_REG); + + // 6402/16 manual says this register must be initialized to 0xff? + writew(0xff, priv(dev)->main_iobase + ADC_SAMPLE_INTERVAL_UPPER_REG); + + bits = SLOW_DAC_BIT | DMA_CH_SELECT_BIT; + if (board(dev)->layout == LAYOUT_4020) + bits |= INTERNAL_CLOCK_4020_BITS; + priv(dev)->hw_config_bits |= bits; + writew(priv(dev)->hw_config_bits, + priv(dev)->main_iobase + HW_CONFIG_REG); + + writew(0, priv(dev)->main_iobase + DAQ_SYNC_REG); + writew(0, priv(dev)->main_iobase + CALIBRATION_REG); + + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + + // set fifos to maximum size + priv(dev)->fifo_size_bits |= DAC_FIFO_BITS; + set_ai_fifo_segment_length(dev, + board(dev)->ai_fifo->max_segment_length); + + priv(dev)->dac_control1_bits = DAC_OUTPUT_ENABLE_BIT; + priv(dev)->intr_enable_bits = /* EN_DAC_INTR_SRC_BIT | DAC_INTR_QEMPTY_BITS | */ + EN_DAC_DONE_INTR_BIT | EN_DAC_UNDERRUN_BIT; + writew(priv(dev)->intr_enable_bits, + priv(dev)->main_iobase + INTR_ENABLE_REG); + + disable_ai_pacing(dev); +}; + +int alloc_and_init_dma_members(comedi_device * dev) +{ + int i; + + // alocate pci dma buffers + for (i = 0; i < ai_dma_ring_count(board(dev)); i++) { + priv(dev)->ai_buffer[i] = + pci_alloc_consistent(priv(dev)->hw_dev, DMA_BUFFER_SIZE, + &priv(dev)->ai_buffer_bus_addr[i]); + if (priv(dev)->ai_buffer[i] == NULL) { + return -ENOMEM; + } + } + for (i = 0; i < AO_DMA_RING_COUNT; i++) { + if (ao_cmd_is_supported(board(dev))) { + priv(dev)->ao_buffer[i] = + pci_alloc_consistent(priv(dev)->hw_dev, + DMA_BUFFER_SIZE, + &priv(dev)->ao_buffer_bus_addr[i]); + if (priv(dev)->ao_buffer[i] == NULL) { + return -ENOMEM; + } + } + } + // allocate dma descriptors + priv(dev)->ai_dma_desc = + pci_alloc_consistent(priv(dev)->hw_dev, + sizeof(struct plx_dma_desc) * ai_dma_ring_count(board(dev)), + &priv(dev)->ai_dma_desc_bus_addr); + if (priv(dev)->ai_dma_desc == NULL) { + return -ENOMEM; + } + DEBUG_PRINT("ai dma descriptors start at bus addr 0x%x\n", + priv(dev)->ai_dma_desc_bus_addr); + if (ao_cmd_is_supported(board(dev))) { + priv(dev)->ao_dma_desc = + pci_alloc_consistent(priv(dev)->hw_dev, + sizeof(struct plx_dma_desc) * AO_DMA_RING_COUNT, + &priv(dev)->ao_dma_desc_bus_addr); + if (priv(dev)->ao_dma_desc == NULL) { + return -ENOMEM; + } + DEBUG_PRINT("ao dma descriptors start at bus addr 0x%x\n", + priv(dev)->ao_dma_desc_bus_addr); + } + // initialize dma descriptors + for (i = 0; i < ai_dma_ring_count(board(dev)); i++) { + priv(dev)->ai_dma_desc[i].pci_start_addr = + cpu_to_le32(priv(dev)->ai_buffer_bus_addr[i]); + if (board(dev)->layout == LAYOUT_4020) + priv(dev)->ai_dma_desc[i].local_start_addr = + cpu_to_le32(priv(dev)->local1_iobase + + ADC_FIFO_REG); + else + priv(dev)->ai_dma_desc[i].local_start_addr = + cpu_to_le32(priv(dev)->local0_iobase + + ADC_FIFO_REG); + priv(dev)->ai_dma_desc[i].transfer_size = cpu_to_le32(0); + priv(dev)->ai_dma_desc[i].next = + cpu_to_le32((priv(dev)->ai_dma_desc_bus_addr + ((i + + 1) % + ai_dma_ring_count(board(dev))) * + sizeof(priv(dev)-> + ai_dma_desc[0])) | PLX_DESC_IN_PCI_BIT | + PLX_INTR_TERM_COUNT | PLX_XFER_LOCAL_TO_PCI); + } + if (ao_cmd_is_supported(board(dev))) { + for (i = 0; i < AO_DMA_RING_COUNT; i++) { + priv(dev)->ao_dma_desc[i].pci_start_addr = + cpu_to_le32(priv(dev)->ao_buffer_bus_addr[i]); + priv(dev)->ao_dma_desc[i].local_start_addr = + cpu_to_le32(priv(dev)->local0_iobase + + DAC_FIFO_REG); + priv(dev)->ao_dma_desc[i].transfer_size = + cpu_to_le32(0); + priv(dev)->ao_dma_desc[i].next = + cpu_to_le32((priv(dev)->ao_dma_desc_bus_addr + + ((i + 1) % (AO_DMA_RING_COUNT)) * + sizeof(priv(dev)-> + ao_dma_desc[0])) | + PLX_DESC_IN_PCI_BIT | PLX_INTR_TERM_COUNT); + } + } + return 0; +} + +static inline void warn_external_queue(comedi_device * dev) +{ + comedi_error(dev, + "AO command and AI external channel queue cannot be used simultaneously."); + comedi_error(dev, + "Use internal AI channel queue (channels must be consecutive and use same range/aref)"); +} + +/* + * Attach is called by the Comedi core to configure the driver + * for a particular board. + */ +static int attach(comedi_device * dev, comedi_devconfig * it) +{ + struct pci_dev *pcidev; + int index; + uint32_t local_range, local_decode; + int retval; + + printk("comedi%d: cb_pcidas64\n", dev->minor); + +/* + * Allocate the private structure area. + */ + if (alloc_private(dev, sizeof(pcidas64_private)) < 0) + return -ENOMEM; + +/* + * Probe the device to determine what device in the series it is. + */ + + for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL); + pcidev != NULL; + pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) { + // is it not a computer boards card? + if (pcidev->vendor != PCI_VENDOR_ID_COMPUTERBOARDS) + continue; + // loop through cards supported by this driver + for (index = 0; index < num_boards(); index++) { + if (pcidas64_boards[index].device_id != pcidev->device) + continue; + // was a particular bus/slot requested? + if (it->options[0] || it->options[1]) { + // are we on the wrong bus/slot? + if (pcidev->bus->number != it->options[0] || + PCI_SLOT(pcidev->devfn) != + it->options[1]) { + continue; + } + } + priv(dev)->hw_dev = pcidev; + dev->board_ptr = pcidas64_boards + index; + break; + } + if (dev->board_ptr) + break; + } + + if (dev->board_ptr == NULL) { + printk("No supported ComputerBoards/MeasurementComputing card found\n"); + return -EIO; + } + + printk("Found %s on bus %i, slot %i\n", board(dev)->name, + pcidev->bus->number, PCI_SLOT(pcidev->devfn)); + + if (comedi_pci_enable(pcidev, driver_cb_pcidas.driver_name)) { + printk(KERN_WARNING + " failed to enable PCI device and request regions\n"); + return -EIO; + } + pci_set_master(pcidev); + + //Initialize dev->board_name + dev->board_name = board(dev)->name; + + priv(dev)->plx9080_phys_iobase = + pci_resource_start(pcidev, PLX9080_BADDRINDEX); + priv(dev)->main_phys_iobase = + pci_resource_start(pcidev, MAIN_BADDRINDEX); + priv(dev)->dio_counter_phys_iobase = + pci_resource_start(pcidev, DIO_COUNTER_BADDRINDEX); + + // remap, won't work with 2.0 kernels but who cares + priv(dev)->plx9080_iobase = ioremap(priv(dev)->plx9080_phys_iobase, + pci_resource_len(pcidev, PLX9080_BADDRINDEX)); + priv(dev)->main_iobase = ioremap(priv(dev)->main_phys_iobase, + pci_resource_len(pcidev, MAIN_BADDRINDEX)); + priv(dev)->dio_counter_iobase = + ioremap(priv(dev)->dio_counter_phys_iobase, + pci_resource_len(pcidev, DIO_COUNTER_BADDRINDEX)); + + if (!priv(dev)->plx9080_iobase || !priv(dev)->main_iobase + || !priv(dev)->dio_counter_iobase) { + printk(" failed to remap io memory\n"); + return -ENOMEM; + } + + DEBUG_PRINT(" plx9080 remapped to 0x%p\n", priv(dev)->plx9080_iobase); + DEBUG_PRINT(" main remapped to 0x%p\n", priv(dev)->main_iobase); + DEBUG_PRINT(" diocounter remapped to 0x%p\n", + priv(dev)->dio_counter_iobase); + + // figure out what local addresses are + local_range = + readl(priv(dev)->plx9080_iobase + + PLX_LAS0RNG_REG) & LRNG_MEM_MASK; + local_decode = + readl(priv(dev)->plx9080_iobase + + PLX_LAS0MAP_REG) & local_range & LMAP_MEM_MASK; + priv(dev)->local0_iobase = + ((uint32_t) priv(dev)-> + main_phys_iobase & ~local_range) | local_decode; + local_range = + readl(priv(dev)->plx9080_iobase + + PLX_LAS1RNG_REG) & LRNG_MEM_MASK; + local_decode = + readl(priv(dev)->plx9080_iobase + + PLX_LAS1MAP_REG) & local_range & LMAP_MEM_MASK; + priv(dev)->local1_iobase = + ((uint32_t) priv(dev)-> + dio_counter_phys_iobase & ~local_range) | local_decode; + + DEBUG_PRINT(" local 0 io addr 0x%x\n", priv(dev)->local0_iobase); + DEBUG_PRINT(" local 1 io addr 0x%x\n", priv(dev)->local1_iobase); + + retval = alloc_and_init_dma_members(dev); + if (retval < 0) + return retval; + + priv(dev)->hw_revision = + hw_revision(dev, readw(priv(dev)->main_iobase + HW_STATUS_REG)); + printk(" stc hardware revision %i\n", priv(dev)->hw_revision); + init_plx9080(dev); + init_stc_registers(dev); + // get irq + if (comedi_request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED, + "cb_pcidas64", dev)) { + printk(" unable to allocate irq %u\n", pcidev->irq); + return -EINVAL; + } + dev->irq = pcidev->irq; + printk(" irq %u\n", dev->irq); + + retval = setup_subdevices(dev); + if (retval < 0) { + return retval; + } + + return 0; +} + +/* + * _detach is called to deconfigure a device. It should deallocate + * resources. + * This function is also called when _attach() fails, so it should be + * careful not to release resources that were not necessarily + * allocated by _attach(). dev->private and dev->subdevices are + * deallocated automatically by the core. + */ +static int detach(comedi_device * dev) +{ + unsigned int i; + + printk("comedi%d: cb_pcidas: remove\n", dev->minor); + + if (dev->irq) + comedi_free_irq(dev->irq, dev); + if (priv(dev)) { + if (priv(dev)->hw_dev) { + if (priv(dev)->plx9080_iobase) { + disable_plx_interrupts(dev); + iounmap((void *)priv(dev)->plx9080_iobase); + } + if (priv(dev)->main_iobase) + iounmap((void *)priv(dev)->main_iobase); + if (priv(dev)->dio_counter_iobase) + iounmap((void *)priv(dev)->dio_counter_iobase); + // free pci dma buffers + for (i = 0; i < ai_dma_ring_count(board(dev)); i++) { + if (priv(dev)->ai_buffer[i]) + pci_free_consistent(priv(dev)->hw_dev, + DMA_BUFFER_SIZE, + priv(dev)->ai_buffer[i], + priv(dev)-> + ai_buffer_bus_addr[i]); + } + for (i = 0; i < AO_DMA_RING_COUNT; i++) { + if (priv(dev)->ao_buffer[i]) + pci_free_consistent(priv(dev)->hw_dev, + DMA_BUFFER_SIZE, + priv(dev)->ao_buffer[i], + priv(dev)-> + ao_buffer_bus_addr[i]); + } + // free dma descriptors + if (priv(dev)->ai_dma_desc) + pci_free_consistent(priv(dev)->hw_dev, + sizeof(struct plx_dma_desc) * + ai_dma_ring_count(board(dev)), + priv(dev)->ai_dma_desc, + priv(dev)->ai_dma_desc_bus_addr); + if (priv(dev)->ao_dma_desc) + pci_free_consistent(priv(dev)->hw_dev, + sizeof(struct plx_dma_desc) * + AO_DMA_RING_COUNT, + priv(dev)->ao_dma_desc, + priv(dev)->ao_dma_desc_bus_addr); + if (priv(dev)->main_phys_iobase) { + comedi_pci_disable(priv(dev)->hw_dev); + } + pci_dev_put(priv(dev)->hw_dev); + } + } + if (dev->subdevices) + subdev_8255_cleanup(dev, dev->subdevices + 4); + + return 0; +} + +static int ai_rinsn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + unsigned int bits = 0, n, i; + unsigned int channel, range, aref; + unsigned long flags; + static const int timeout = 100; + + DEBUG_PRINT("chanspec 0x%x\n", insn->chanspec); + channel = CR_CHAN(insn->chanspec); + range = CR_RANGE(insn->chanspec); + aref = CR_AREF(insn->chanspec); + + // disable card's analog input interrupt sources and pacing + // 4020 generates dac done interrupts even though they are disabled + disable_ai_pacing(dev); + + comedi_spin_lock_irqsave(&dev->spinlock, flags); + if (insn->chanspec & CR_ALT_FILTER) + priv(dev)->adc_control1_bits |= ADC_DITHER_BIT; + else + priv(dev)->adc_control1_bits &= ~ADC_DITHER_BIT; + writew(priv(dev)->adc_control1_bits, + priv(dev)->main_iobase + ADC_CONTROL1_REG); + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + + if (board(dev)->layout != LAYOUT_4020) { + // use internal queue + priv(dev)->hw_config_bits &= ~EXT_QUEUE_BIT; + writew(priv(dev)->hw_config_bits, + priv(dev)->main_iobase + HW_CONFIG_REG); + + // ALT_SOURCE is internal calibration reference + if (insn->chanspec & CR_ALT_SOURCE) { + unsigned int cal_en_bit; + + DEBUG_PRINT("reading calibration source\n"); + if (board(dev)->layout == LAYOUT_60XX) + cal_en_bit = CAL_EN_60XX_BIT; + else + cal_en_bit = CAL_EN_64XX_BIT; + // select internal reference source to connect to channel 0 + writew(cal_en_bit | adc_src_bits(priv(dev)-> + calibration_source), + priv(dev)->main_iobase + CALIBRATION_REG); + } else { + // make sure internal calibration source is turned off + writew(0, priv(dev)->main_iobase + CALIBRATION_REG); + } + // load internal queue + bits = 0; + // set gain + bits |= ai_range_bits_6xxx(dev, CR_RANGE(insn->chanspec)); + // set single-ended / differential + bits |= se_diff_bit_6xxx(dev, aref == AREF_DIFF); + if (aref == AREF_COMMON) + bits |= ADC_COMMON_BIT; + bits |= adc_chan_bits(channel); + // set stop channel + writew(adc_chan_bits(channel), + priv(dev)->main_iobase + ADC_QUEUE_HIGH_REG); + // set start channel, and rest of settings + writew(bits, priv(dev)->main_iobase + ADC_QUEUE_LOAD_REG); + } else { + uint8_t old_cal_range_bits = priv(dev)->i2c_cal_range_bits; + + priv(dev)->i2c_cal_range_bits &= ~ADC_SRC_4020_MASK; + if (insn->chanspec & CR_ALT_SOURCE) { + DEBUG_PRINT("reading calibration source\n"); + priv(dev)->i2c_cal_range_bits |= + adc_src_4020_bits(priv(dev)-> + calibration_source); + } else { //select BNC inputs + priv(dev)->i2c_cal_range_bits |= adc_src_4020_bits(4); + } + // select range + if (range == 0) + priv(dev)->i2c_cal_range_bits |= attenuate_bit(channel); + else + priv(dev)->i2c_cal_range_bits &= + ~attenuate_bit(channel); + // update calibration/range i2c register only if necessary, as it is very slow + if (old_cal_range_bits != priv(dev)->i2c_cal_range_bits) { + uint8_t i2c_data = priv(dev)->i2c_cal_range_bits; + i2c_write(dev, RANGE_CAL_I2C_ADDR, &i2c_data, + sizeof(i2c_data)); + } + + /* 4020 manual asks that sample interval register to be set before writing to convert register. + * Using somewhat arbitrary setting of 4 master clock ticks = 0.1 usec */ + writew(0, + priv(dev)->main_iobase + ADC_SAMPLE_INTERVAL_UPPER_REG); + writew(2, + priv(dev)->main_iobase + ADC_SAMPLE_INTERVAL_LOWER_REG); + } + + for (n = 0; n < insn->n; n++) { + + // clear adc buffer (inside loop for 4020 sake) + writew(0, priv(dev)->main_iobase + ADC_BUFFER_CLEAR_REG); + + /* trigger conversion, bits sent only matter for 4020 */ + writew(adc_convert_chan_4020_bits(CR_CHAN(insn->chanspec)), + priv(dev)->main_iobase + ADC_CONVERT_REG); + + // wait for data + for (i = 0; i < timeout; i++) { + bits = readw(priv(dev)->main_iobase + HW_STATUS_REG); + DEBUG_PRINT(" pipe bits 0x%x\n", pipe_full_bits(bits)); + if (board(dev)->layout == LAYOUT_4020) { + if (readw(priv(dev)->main_iobase + + ADC_WRITE_PNTR_REG)) + break; + } else { + if (pipe_full_bits(bits)) + break; + } + comedi_udelay(1); + } + DEBUG_PRINT(" looped %i times waiting for data\n", i); + if (i == timeout) { + comedi_error(dev, " analog input read insn timed out"); + rt_printk(" status 0x%x\n", bits); + return -ETIME; + } + if (board(dev)->layout == LAYOUT_4020) + data[n] = + readl(priv(dev)->dio_counter_iobase + + ADC_FIFO_REG) & 0xffff; + else + data[n] = + readw(priv(dev)->main_iobase + PIPE1_READ_REG); + } + + return n; +} + +static int ai_config_calibration_source(comedi_device * dev, lsampl_t * data) +{ + lsampl_t source = data[1]; + int num_calibration_sources; + + if (board(dev)->layout == LAYOUT_60XX) + num_calibration_sources = 16; + else + num_calibration_sources = 8; + if (source >= num_calibration_sources) { + printk("invalid calibration source: %i\n", source); + return -EINVAL; + } + + DEBUG_PRINT("setting calibration source to %i\n", source); + priv(dev)->calibration_source = source; + + return 2; +} + +static int ai_config_block_size(comedi_device * dev, lsampl_t * data) +{ + int fifo_size; + const hw_fifo_info_t *const fifo = board(dev)->ai_fifo; + unsigned int block_size, requested_block_size; + int retval; + + requested_block_size = data[1]; + + if (requested_block_size) { + fifo_size = + requested_block_size * fifo->num_segments / + bytes_in_sample; + + retval = set_ai_fifo_size(dev, fifo_size); + if (retval < 0) + return retval; + + } + + block_size = ai_fifo_size(dev) / fifo->num_segments * bytes_in_sample; + + data[1] = block_size; + + return 2; +} + +static int ai_config_master_clock_4020(comedi_device * dev, lsampl_t * data) +{ + unsigned int divisor = data[4]; + int retval = 0; + + if (divisor < 2) { + divisor = 2; + retval = -EAGAIN; + } + + switch (data[1]) { + case COMEDI_EV_SCAN_BEGIN: + priv(dev)->ext_clock.divisor = divisor; + priv(dev)->ext_clock.chanspec = data[2]; + break; + default: + return -EINVAL; + break; + } + + data[4] = divisor; + + return retval ? retval : 5; +} + +// XXX could add support for 60xx series +static int ai_config_master_clock(comedi_device * dev, lsampl_t * data) +{ + + switch (board(dev)->layout) { + case LAYOUT_4020: + return ai_config_master_clock_4020(dev, data); + break; + default: + return -EINVAL; + break; + } + + return -EINVAL; +} + +static int ai_config_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int id = data[0]; + + switch (id) { + case INSN_CONFIG_ALT_SOURCE: + return ai_config_calibration_source(dev, data); + break; + case INSN_CONFIG_BLOCK_SIZE: + return ai_config_block_size(dev, data); + break; + case INSN_CONFIG_TIMER_1: + return ai_config_master_clock(dev, data); + break; + default: + return -EINVAL; + break; + } + return -EINVAL; +} + +static int ai_cmdtest(comedi_device * dev, comedi_subdevice * s, + comedi_cmd * cmd) +{ + int err = 0; + int tmp; + unsigned int tmp_arg, tmp_arg2; + int i; + int aref; + unsigned int triggers; + + /* step 1: make sure trigger sources are trivially valid */ + + tmp = cmd->start_src; + cmd->start_src &= TRIG_NOW | TRIG_EXT; + if (!cmd->start_src || tmp != cmd->start_src) + err++; + + tmp = cmd->scan_begin_src; + triggers = TRIG_TIMER; + if (board(dev)->layout == LAYOUT_4020) + triggers |= TRIG_OTHER; + else + triggers |= TRIG_FOLLOW; + cmd->scan_begin_src &= triggers; + if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src) + err++; + + tmp = cmd->convert_src; + triggers = TRIG_TIMER; + if (board(dev)->layout == LAYOUT_4020) + triggers |= TRIG_NOW; + else + triggers |= TRIG_EXT; + cmd->convert_src &= triggers; + if (!cmd->convert_src || tmp != cmd->convert_src) + err++; + + tmp = cmd->scan_end_src; + cmd->scan_end_src &= TRIG_COUNT; + if (!cmd->scan_end_src || tmp != cmd->scan_end_src) + err++; + + tmp = cmd->stop_src; + cmd->stop_src &= TRIG_COUNT | TRIG_EXT | TRIG_NONE; + if (!cmd->stop_src || tmp != cmd->stop_src) + err++; + + if (err) + return 1; + + /* step 2: make sure trigger sources are unique and mutually compatible */ + + // uniqueness check + if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT) + err++; + if (cmd->scan_begin_src != TRIG_TIMER && + cmd->scan_begin_src != TRIG_OTHER && + cmd->scan_begin_src != TRIG_FOLLOW) + err++; + if (cmd->convert_src != TRIG_TIMER && + cmd->convert_src != TRIG_EXT && cmd->convert_src != TRIG_NOW) + err++; + if (cmd->stop_src != TRIG_COUNT && + cmd->stop_src != TRIG_NONE && cmd->stop_src != TRIG_EXT) + err++; + + // compatibility check + if (cmd->convert_src == TRIG_EXT && cmd->scan_begin_src == TRIG_TIMER) + err++; + if (cmd->stop_src != TRIG_COUNT && + cmd->stop_src != TRIG_NONE && cmd->stop_src != TRIG_EXT) + err++; + + if (err) + return 2; + + /* step 3: make sure arguments are trivially compatible */ + + if (cmd->convert_src == TRIG_TIMER) { + if (board(dev)->layout == LAYOUT_4020) { + if (cmd->convert_arg) { + cmd->convert_arg = 0; + err++; + } + } else { + if (cmd->convert_arg < board(dev)->ai_speed) { + cmd->convert_arg = board(dev)->ai_speed; + err++; + } + if (cmd->scan_begin_src == TRIG_TIMER) { + // if scans are timed faster than conversion rate allows + if (cmd->convert_arg * cmd->chanlist_len > + cmd->scan_begin_arg) { + cmd->scan_begin_arg = + cmd->convert_arg * + cmd->chanlist_len; + err++; + } + } + } + } + + if (!cmd->chanlist_len) { + cmd->chanlist_len = 1; + err++; + } + if (cmd->scan_end_arg != cmd->chanlist_len) { + cmd->scan_end_arg = cmd->chanlist_len; + err++; + } + + switch (cmd->stop_src) { + case TRIG_EXT: + break; + case TRIG_COUNT: + if (!cmd->stop_arg) { + cmd->stop_arg = 1; + err++; + } + break; + case TRIG_NONE: + if (cmd->stop_arg != 0) { + cmd->stop_arg = 0; + err++; + } + break; + default: + break; + } + + if (err) + return 3; + + /* step 4: fix up any arguments */ + + if (cmd->convert_src == TRIG_TIMER) { + tmp_arg = cmd->convert_arg; + tmp_arg2 = cmd->scan_begin_arg; + check_adc_timing(dev, cmd); + if (tmp_arg != cmd->convert_arg) + err++; + if (tmp_arg2 != cmd->scan_begin_arg) + err++; + } + + if (err) + return 4; + + // make sure user is doesn't change analog reference mid chanlist + if (cmd->chanlist) { + aref = CR_AREF(cmd->chanlist[0]); + for (i = 1; i < cmd->chanlist_len; i++) { + if (aref != CR_AREF(cmd->chanlist[i])) { + comedi_error(dev, + "all elements in chanlist must use the same analog reference"); + err++; + break; + } + } + // check 4020 chanlist + if (board(dev)->layout == LAYOUT_4020) { + unsigned int first_channel = CR_CHAN(cmd->chanlist[0]); + for (i = 1; i < cmd->chanlist_len; i++) { + if (CR_CHAN(cmd->chanlist[i]) != + first_channel + i) { + comedi_error(dev, + "chanlist must use consecutive channels"); + err++; + break; + } + } + if (cmd->chanlist_len == 3) { + comedi_error(dev, + "chanlist cannot be 3 channels long, use 1, 2, or 4 channels"); + err++; + } + } + } + + if (err) + return 5; + + return 0; +} + +static int use_hw_sample_counter(comedi_cmd * cmd) +{ +// disable for now until I work out a race + return 0; + + if (cmd->stop_src == TRIG_COUNT && cmd->stop_arg <= max_counter_value) + return 1; + else + return 0; +} + +static void setup_sample_counters(comedi_device * dev, comedi_cmd * cmd) +{ + if (cmd->stop_src == TRIG_COUNT) { + // set software count + priv(dev)->ai_count = cmd->stop_arg * cmd->chanlist_len; + } + // load hardware conversion counter + if (use_hw_sample_counter(cmd)) { + writew(cmd->stop_arg & 0xffff, + priv(dev)->main_iobase + ADC_COUNT_LOWER_REG); + writew((cmd->stop_arg >> 16) & 0xff, + priv(dev)->main_iobase + ADC_COUNT_UPPER_REG); + } else { + writew(1, priv(dev)->main_iobase + ADC_COUNT_LOWER_REG); + } +} + +static inline unsigned int dma_transfer_size(comedi_device * dev) +{ + unsigned int num_samples; + + num_samples = + priv(dev)->ai_fifo_segment_length * + board(dev)->ai_fifo->sample_packing_ratio; + if (num_samples > DMA_BUFFER_SIZE / sizeof(uint16_t)) + num_samples = DMA_BUFFER_SIZE / sizeof(uint16_t); + + return num_samples; +} + +static void disable_ai_pacing(comedi_device * dev) +{ + unsigned long flags; + + disable_ai_interrupts(dev); + + comedi_spin_lock_irqsave(&dev->spinlock, flags); + priv(dev)->adc_control1_bits &= ~ADC_SW_GATE_BIT; + writew(priv(dev)->adc_control1_bits, + priv(dev)->main_iobase + ADC_CONTROL1_REG); + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + + /* disable pacing, triggering, etc */ + writew(ADC_DMA_DISABLE_BIT | ADC_SOFT_GATE_BITS | ADC_GATE_LEVEL_BIT, + priv(dev)->main_iobase + ADC_CONTROL0_REG); +} + +static void disable_ai_interrupts(comedi_device * dev) +{ + unsigned long flags; + + comedi_spin_lock_irqsave(&dev->spinlock, flags); + priv(dev)->intr_enable_bits &= + ~EN_ADC_INTR_SRC_BIT & ~EN_ADC_DONE_INTR_BIT & + ~EN_ADC_ACTIVE_INTR_BIT & ~EN_ADC_STOP_INTR_BIT & + ~EN_ADC_OVERRUN_BIT & ~ADC_INTR_SRC_MASK; + writew(priv(dev)->intr_enable_bits, + priv(dev)->main_iobase + INTR_ENABLE_REG); + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + + DEBUG_PRINT("intr enable bits 0x%x\n", priv(dev)->intr_enable_bits); +} + +static void enable_ai_interrupts(comedi_device * dev, const comedi_cmd * cmd) +{ + uint32_t bits; + unsigned long flags; + + bits = EN_ADC_OVERRUN_BIT | EN_ADC_DONE_INTR_BIT | + EN_ADC_ACTIVE_INTR_BIT | EN_ADC_STOP_INTR_BIT; + // Use pio transfer and interrupt on end of conversion if TRIG_WAKE_EOS flag is set. + if (cmd->flags & TRIG_WAKE_EOS) { + // 4020 doesn't support pio transfers except for fifo dregs + if (board(dev)->layout != LAYOUT_4020) + bits |= ADC_INTR_EOSCAN_BITS | EN_ADC_INTR_SRC_BIT; + } + comedi_spin_lock_irqsave(&dev->spinlock, flags); + priv(dev)->intr_enable_bits |= bits; + writew(priv(dev)->intr_enable_bits, + priv(dev)->main_iobase + INTR_ENABLE_REG); + DEBUG_PRINT("intr enable bits 0x%x\n", priv(dev)->intr_enable_bits); + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); +} + +static uint32_t ai_convert_counter_6xxx(const comedi_device * dev, + const comedi_cmd * cmd) +{ + // supposed to load counter with desired divisor minus 3 + return cmd->convert_arg / TIMER_BASE - 3; +} + +static uint32_t ai_scan_counter_6xxx(comedi_device * dev, comedi_cmd * cmd) +{ + uint32_t count; + // figure out how long we need to delay at end of scan + switch (cmd->scan_begin_src) { + case TRIG_TIMER: + count = (cmd->scan_begin_arg - + (cmd->convert_arg * (cmd->chanlist_len - 1))) + / TIMER_BASE; + break; + case TRIG_FOLLOW: + count = cmd->convert_arg / TIMER_BASE; + break; + default: + return 0; + break; + } + return count - 3; +} + +static uint32_t ai_convert_counter_4020(comedi_device * dev, comedi_cmd * cmd) +{ + unsigned int divisor; + + switch (cmd->scan_begin_src) { + case TRIG_TIMER: + divisor = cmd->scan_begin_arg / TIMER_BASE; + break; + case TRIG_OTHER: + divisor = priv(dev)->ext_clock.divisor; + break; + default: // should never happen + comedi_error(dev, "bug! failed to set ai pacing!"); + divisor = 1000; + break; + } + + // supposed to load counter with desired divisor minus 2 for 4020 + return divisor - 2; +} + +static void select_master_clock_4020(comedi_device * dev, + const comedi_cmd * cmd) +{ + // select internal/external master clock + priv(dev)->hw_config_bits &= ~MASTER_CLOCK_4020_MASK; + if (cmd->scan_begin_src == TRIG_OTHER) { + int chanspec = priv(dev)->ext_clock.chanspec; + + if (CR_CHAN(chanspec)) + priv(dev)->hw_config_bits |= BNC_CLOCK_4020_BITS; + else + priv(dev)->hw_config_bits |= EXT_CLOCK_4020_BITS; + } else { + priv(dev)->hw_config_bits |= INTERNAL_CLOCK_4020_BITS; + } + writew(priv(dev)->hw_config_bits, + priv(dev)->main_iobase + HW_CONFIG_REG); +} + +static void select_master_clock(comedi_device * dev, const comedi_cmd * cmd) +{ + switch (board(dev)->layout) { + case LAYOUT_4020: + select_master_clock_4020(dev, cmd); + break; + default: + break; + } +} + +static inline void dma_start_sync(comedi_device * dev, unsigned int channel) +{ + unsigned long flags; + + // spinlock for plx dma control/status reg + comedi_spin_lock_irqsave(&dev->spinlock, flags); + if (channel) + writeb(PLX_DMA_EN_BIT | PLX_DMA_START_BIT | + PLX_CLEAR_DMA_INTR_BIT, + priv(dev)->plx9080_iobase + PLX_DMA1_CS_REG); + else + writeb(PLX_DMA_EN_BIT | PLX_DMA_START_BIT | + PLX_CLEAR_DMA_INTR_BIT, + priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG); + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); +} + +static void set_ai_pacing(comedi_device * dev, comedi_cmd * cmd) +{ + uint32_t convert_counter = 0, scan_counter = 0; + + check_adc_timing(dev, cmd); + + select_master_clock(dev, cmd); + + if (board(dev)->layout == LAYOUT_4020) { + convert_counter = ai_convert_counter_4020(dev, cmd); + } else { + convert_counter = ai_convert_counter_6xxx(dev, cmd); + scan_counter = ai_scan_counter_6xxx(dev, cmd); + } + + // load lower 16 bits of convert interval + writew(convert_counter & 0xffff, + priv(dev)->main_iobase + ADC_SAMPLE_INTERVAL_LOWER_REG); + DEBUG_PRINT("convert counter 0x%x\n", convert_counter); + // load upper 8 bits of convert interval + writew((convert_counter >> 16) & 0xff, + priv(dev)->main_iobase + ADC_SAMPLE_INTERVAL_UPPER_REG); + // load lower 16 bits of scan delay + writew(scan_counter & 0xffff, + priv(dev)->main_iobase + ADC_DELAY_INTERVAL_LOWER_REG); + // load upper 8 bits of scan delay + writew((scan_counter >> 16) & 0xff, + priv(dev)->main_iobase + ADC_DELAY_INTERVAL_UPPER_REG); + DEBUG_PRINT("scan counter 0x%x\n", scan_counter); +} + +static int use_internal_queue_6xxx(const comedi_cmd * cmd) +{ + int i; + for (i = 0; i + 1 < cmd->chanlist_len; i++) { + if (CR_CHAN(cmd->chanlist[i + 1]) != + CR_CHAN(cmd->chanlist[i]) + 1) + return 0; + if (CR_RANGE(cmd->chanlist[i + 1]) != + CR_RANGE(cmd->chanlist[i])) + return 0; + if (CR_AREF(cmd->chanlist[i + 1]) != CR_AREF(cmd->chanlist[i])) + return 0; + } + return 1; +} + +static int setup_channel_queue(comedi_device * dev, const comedi_cmd * cmd) +{ + unsigned short bits; + int i; + + if (board(dev)->layout != LAYOUT_4020) { + if (use_internal_queue_6xxx(cmd)) { + priv(dev)->hw_config_bits &= ~EXT_QUEUE_BIT; + writew(priv(dev)->hw_config_bits, + priv(dev)->main_iobase + HW_CONFIG_REG); + bits = 0; + // set channel + bits |= adc_chan_bits(CR_CHAN(cmd->chanlist[0])); + // set gain + bits |= ai_range_bits_6xxx(dev, + CR_RANGE(cmd->chanlist[0])); + // set single-ended / differential + bits |= se_diff_bit_6xxx(dev, + CR_AREF(cmd->chanlist[0]) == AREF_DIFF); + if (CR_AREF(cmd->chanlist[0]) == AREF_COMMON) + bits |= ADC_COMMON_BIT; + // set stop channel + writew(adc_chan_bits(CR_CHAN(cmd->chanlist[cmd-> + chanlist_len - 1])), + priv(dev)->main_iobase + ADC_QUEUE_HIGH_REG); + // set start channel, and rest of settings + writew(bits, + priv(dev)->main_iobase + ADC_QUEUE_LOAD_REG); + } else { + // use external queue + if (dev->write_subdev && dev->write_subdev->busy) { + warn_external_queue(dev); + return -EBUSY; + } + priv(dev)->hw_config_bits |= EXT_QUEUE_BIT; + writew(priv(dev)->hw_config_bits, + priv(dev)->main_iobase + HW_CONFIG_REG); + // clear DAC buffer to prevent weird interactions + writew(0, + priv(dev)->main_iobase + DAC_BUFFER_CLEAR_REG); + // clear queue pointer + writew(0, priv(dev)->main_iobase + ADC_QUEUE_CLEAR_REG); + // load external queue + for (i = 0; i < cmd->chanlist_len; i++) { + bits = 0; + // set channel + bits |= adc_chan_bits(CR_CHAN(cmd-> + chanlist[i])); + // set gain + bits |= ai_range_bits_6xxx(dev, + CR_RANGE(cmd->chanlist[i])); + // set single-ended / differential + bits |= se_diff_bit_6xxx(dev, + CR_AREF(cmd->chanlist[i]) == AREF_DIFF); + if (CR_AREF(cmd->chanlist[i]) == AREF_COMMON) + bits |= ADC_COMMON_BIT; + // mark end of queue + if (i == cmd->chanlist_len - 1) + bits |= QUEUE_EOSCAN_BIT | + QUEUE_EOSEQ_BIT; + writew(bits, + priv(dev)->main_iobase + + ADC_QUEUE_FIFO_REG); + DEBUG_PRINT + ("wrote 0x%x to external channel queue\n", + bits); + } + /* doing a queue clear is not specified in board docs, + * but required for reliable operation */ + writew(0, priv(dev)->main_iobase + ADC_QUEUE_CLEAR_REG); + // prime queue holding register + writew(0, priv(dev)->main_iobase + ADC_QUEUE_LOAD_REG); + } + } else { + unsigned short old_cal_range_bits = + priv(dev)->i2c_cal_range_bits; + + priv(dev)->i2c_cal_range_bits &= ~ADC_SRC_4020_MASK; + //select BNC inputs + priv(dev)->i2c_cal_range_bits |= adc_src_4020_bits(4); + // select ranges + for (i = 0; i < cmd->chanlist_len; i++) { + unsigned int channel = CR_CHAN(cmd->chanlist[i]); + unsigned int range = CR_RANGE(cmd->chanlist[i]); + + if (range == 0) + priv(dev)->i2c_cal_range_bits |= + attenuate_bit(channel); + else + priv(dev)->i2c_cal_range_bits &= + ~attenuate_bit(channel); + } + // update calibration/range i2c register only if necessary, as it is very slow + if (old_cal_range_bits != priv(dev)->i2c_cal_range_bits) { + uint8_t i2c_data = priv(dev)->i2c_cal_range_bits; + i2c_write(dev, RANGE_CAL_I2C_ADDR, &i2c_data, + sizeof(i2c_data)); + } + } + return 0; +} + +static inline void load_first_dma_descriptor(comedi_device * dev, + unsigned int dma_channel, unsigned int descriptor_bits) +{ + /* The transfer size, pci address, and local address registers + * are supposedly unused during chained dma, + * but I have found that left over values from last operation + * occasionally cause problems with transfer of first dma + * block. Initializing them to zero seems to fix the problem. */ + if (dma_channel) { + writel(0, + priv(dev)->plx9080_iobase + PLX_DMA1_TRANSFER_SIZE_REG); + writel(0, priv(dev)->plx9080_iobase + PLX_DMA1_PCI_ADDRESS_REG); + writel(0, + priv(dev)->plx9080_iobase + PLX_DMA1_LOCAL_ADDRESS_REG); + writel(descriptor_bits, + priv(dev)->plx9080_iobase + PLX_DMA1_DESCRIPTOR_REG); + } else { + writel(0, + priv(dev)->plx9080_iobase + PLX_DMA0_TRANSFER_SIZE_REG); + writel(0, priv(dev)->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG); + writel(0, + priv(dev)->plx9080_iobase + PLX_DMA0_LOCAL_ADDRESS_REG); + writel(descriptor_bits, + priv(dev)->plx9080_iobase + PLX_DMA0_DESCRIPTOR_REG); + } +} + +static int ai_cmd(comedi_device * dev, comedi_subdevice * s) +{ + comedi_async *async = s->async; + comedi_cmd *cmd = &async->cmd; + uint32_t bits; + unsigned int i; + unsigned long flags; + int retval; + + disable_ai_pacing(dev); + abort_dma(dev, 1); + + retval = setup_channel_queue(dev, cmd); + if (retval < 0) + return retval; + + // make sure internal calibration source is turned off + writew(0, priv(dev)->main_iobase + CALIBRATION_REG); + + set_ai_pacing(dev, cmd); + + setup_sample_counters(dev, cmd); + + enable_ai_interrupts(dev, cmd); + + comedi_spin_lock_irqsave(&dev->spinlock, flags); + /* set mode, allow conversions through software gate */ + priv(dev)->adc_control1_bits |= ADC_SW_GATE_BIT; + priv(dev)->adc_control1_bits &= ~ADC_DITHER_BIT; + if (board(dev)->layout != LAYOUT_4020) { + priv(dev)->adc_control1_bits &= ~ADC_MODE_MASK; + if (cmd->convert_src == TRIG_EXT) + priv(dev)->adc_control1_bits |= adc_mode_bits(13); // good old mode 13 + else + priv(dev)->adc_control1_bits |= adc_mode_bits(8); // mode 8. What else could you need? + } else { + priv(dev)->adc_control1_bits &= ~CHANNEL_MODE_4020_MASK; + if (cmd->chanlist_len == 4) + priv(dev)->adc_control1_bits |= FOUR_CHANNEL_4020_BITS; + else if (cmd->chanlist_len == 2) + priv(dev)->adc_control1_bits |= TWO_CHANNEL_4020_BITS; + priv(dev)->adc_control1_bits &= ~ADC_LO_CHANNEL_4020_MASK; + priv(dev)->adc_control1_bits |= + adc_lo_chan_4020_bits(CR_CHAN(cmd->chanlist[0])); + priv(dev)->adc_control1_bits &= ~ADC_HI_CHANNEL_4020_MASK; + priv(dev)->adc_control1_bits |= + adc_hi_chan_4020_bits(CR_CHAN(cmd->chanlist[cmd-> + chanlist_len - 1])); + } + writew(priv(dev)->adc_control1_bits, + priv(dev)->main_iobase + ADC_CONTROL1_REG); + DEBUG_PRINT("control1 bits 0x%x\n", priv(dev)->adc_control1_bits); + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + + // clear adc buffer + writew(0, priv(dev)->main_iobase + ADC_BUFFER_CLEAR_REG); + + if ((cmd->flags & TRIG_WAKE_EOS) == 0 || + board(dev)->layout == LAYOUT_4020) { + priv(dev)->ai_dma_index = 0; + + // set dma transfer size + for (i = 0; i < ai_dma_ring_count(board(dev)); i++) + priv(dev)->ai_dma_desc[i].transfer_size = + cpu_to_le32(dma_transfer_size(dev) * + sizeof(uint16_t)); + + // give location of first dma descriptor + load_first_dma_descriptor(dev, 1, + priv(dev)-> + ai_dma_desc_bus_addr | PLX_DESC_IN_PCI_BIT | + PLX_INTR_TERM_COUNT | PLX_XFER_LOCAL_TO_PCI); + + dma_start_sync(dev, 1); + } + + if (board(dev)->layout == LAYOUT_4020) { + /* set source for external triggers */ + bits = 0; + if (cmd->start_src == TRIG_EXT && CR_CHAN(cmd->start_arg)) + bits |= EXT_START_TRIG_BNC_BIT; + if (cmd->stop_src == TRIG_EXT && CR_CHAN(cmd->stop_arg)) + bits |= EXT_STOP_TRIG_BNC_BIT; + writew(bits, priv(dev)->main_iobase + DAQ_ATRIG_LOW_4020_REG); + } + + comedi_spin_lock_irqsave(&dev->spinlock, flags); + + /* enable pacing, triggering, etc */ + bits = ADC_ENABLE_BIT | ADC_SOFT_GATE_BITS | ADC_GATE_LEVEL_BIT; + if (cmd->flags & TRIG_WAKE_EOS) + bits |= ADC_DMA_DISABLE_BIT; + // set start trigger + if (cmd->start_src == TRIG_EXT) { + bits |= ADC_START_TRIG_EXT_BITS; + if (cmd->start_arg & CR_INVERT) + bits |= ADC_START_TRIG_FALLING_BIT; + } else if (cmd->start_src == TRIG_NOW) + bits |= ADC_START_TRIG_SOFT_BITS; + if (use_hw_sample_counter(cmd)) + bits |= ADC_SAMPLE_COUNTER_EN_BIT; + writew(bits, priv(dev)->main_iobase + ADC_CONTROL0_REG); + DEBUG_PRINT("control0 bits 0x%x\n", bits); + + priv(dev)->ai_cmd_running = 1; + + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + + // start aquisition + if (cmd->start_src == TRIG_NOW) { + writew(0, priv(dev)->main_iobase + ADC_START_REG); + DEBUG_PRINT("soft trig\n"); + } + + return 0; +} + +// read num_samples from 16 bit wide ai fifo +static void pio_drain_ai_fifo_16(comedi_device * dev) +{ + comedi_subdevice *s = dev->read_subdev; + comedi_async *async = s->async; + comedi_cmd *cmd = &async->cmd; + unsigned int i; + uint16_t prepost_bits; + int read_segment, read_index, write_segment, write_index; + int num_samples; + + do { + // get least significant 15 bits + read_index = + readw(priv(dev)->main_iobase + + ADC_READ_PNTR_REG) & 0x7fff; + write_index = + readw(priv(dev)->main_iobase + + ADC_WRITE_PNTR_REG) & 0x7fff; + /* Get most significant bits (grey code). Different boards use different code + * so use a scheme that doesn't depend on encoding. This read must + * occur after reading least significant 15 bits to avoid race + * with fifo switching to next segment. */ + prepost_bits = readw(priv(dev)->main_iobase + PREPOST_REG); + + /* if read and write pointers are not on the same fifo segment, read to the + * end of the read segment */ + read_segment = adc_upper_read_ptr_code(prepost_bits); + write_segment = adc_upper_write_ptr_code(prepost_bits); + + DEBUG_PRINT(" rd seg %i, wrt seg %i, rd idx %i, wrt idx %i\n", + read_segment, write_segment, read_index, write_index); + + if (read_segment != write_segment) + num_samples = + priv(dev)->ai_fifo_segment_length - read_index; + else + num_samples = write_index - read_index; + + if (cmd->stop_src == TRIG_COUNT) { + if (priv(dev)->ai_count == 0) + break; + if (num_samples > priv(dev)->ai_count) { + num_samples = priv(dev)->ai_count; + } + priv(dev)->ai_count -= num_samples; + } + + if (num_samples < 0) { + rt_printk(" cb_pcidas64: bug! num_samples < 0\n"); + break; + } + + DEBUG_PRINT(" read %i samples from fifo\n", num_samples); + + for (i = 0; i < num_samples; i++) { + cfc_write_to_buffer(s, + readw(priv(dev)->main_iobase + ADC_FIFO_REG)); + } + + } while (read_segment != write_segment); +} + +/* Read from 32 bit wide ai fifo of 4020 - deal with insane grey coding of pointers. + * The pci-4020 hardware only supports + * dma transfers (it only supports the use of pio for draining the last remaining + * points from the fifo when a data aquisition operation has completed). + */ +static void pio_drain_ai_fifo_32(comedi_device * dev) +{ + comedi_subdevice *s = dev->read_subdev; + comedi_async *async = s->async; + comedi_cmd *cmd = &async->cmd; + unsigned int i; + unsigned int max_transfer = 100000; + uint32_t fifo_data; + int write_code = + readw(priv(dev)->main_iobase + ADC_WRITE_PNTR_REG) & 0x7fff; + int read_code = + readw(priv(dev)->main_iobase + ADC_READ_PNTR_REG) & 0x7fff; + + if (cmd->stop_src == TRIG_COUNT) { + if (max_transfer > priv(dev)->ai_count) { + max_transfer = priv(dev)->ai_count; + } + } + for (i = 0; read_code != write_code && i < max_transfer;) { + fifo_data = readl(priv(dev)->dio_counter_iobase + ADC_FIFO_REG); + cfc_write_to_buffer(s, fifo_data & 0xffff); + i++; + if (i < max_transfer) { + cfc_write_to_buffer(s, (fifo_data >> 16) & 0xffff); + i++; + } + read_code = + readw(priv(dev)->main_iobase + + ADC_READ_PNTR_REG) & 0x7fff; + } + priv(dev)->ai_count -= i; +} + +// empty fifo +static void pio_drain_ai_fifo(comedi_device * dev) +{ + if (board(dev)->layout == LAYOUT_4020) { + pio_drain_ai_fifo_32(dev); + } else + pio_drain_ai_fifo_16(dev); +} + +static void drain_dma_buffers(comedi_device * dev, unsigned int channel) +{ + comedi_async *async = dev->read_subdev->async; + uint32_t next_transfer_addr; + int j; + int num_samples = 0; + void *pci_addr_reg; + + if (channel) + pci_addr_reg = + priv(dev)->plx9080_iobase + PLX_DMA1_PCI_ADDRESS_REG; + else + pci_addr_reg = + priv(dev)->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG; + + // loop until we have read all the full buffers + for (j = 0, next_transfer_addr = readl(pci_addr_reg); + (next_transfer_addr < + priv(dev)->ai_buffer_bus_addr[priv(dev)->ai_dma_index] + || next_transfer_addr >= + priv(dev)->ai_buffer_bus_addr[priv(dev)->ai_dma_index] + + DMA_BUFFER_SIZE) && j < ai_dma_ring_count(board(dev)); + j++) { + // transfer data from dma buffer to comedi buffer + num_samples = dma_transfer_size(dev); + if (async->cmd.stop_src == TRIG_COUNT) { + if (num_samples > priv(dev)->ai_count) + num_samples = priv(dev)->ai_count; + priv(dev)->ai_count -= num_samples; + } + cfc_write_array_to_buffer(dev->read_subdev, + priv(dev)->ai_buffer[priv(dev)->ai_dma_index], + num_samples * sizeof(uint16_t)); + priv(dev)->ai_dma_index = + (priv(dev)->ai_dma_index + + 1) % ai_dma_ring_count(board(dev)); + + DEBUG_PRINT("next buffer addr 0x%lx\n", + (unsigned long)priv(dev)->ai_buffer_bus_addr[priv(dev)-> + ai_dma_index]); + DEBUG_PRINT("pci addr reg 0x%x\n", next_transfer_addr); + } + /* XXX check for dma ring buffer overrun (use end-of-chain bit to mark last + * unused buffer) */ +} + +void handle_ai_interrupt(comedi_device * dev, unsigned short status, + unsigned int plx_status) +{ + comedi_subdevice *s = dev->read_subdev; + comedi_async *async = s->async; + comedi_cmd *cmd = &async->cmd; + uint8_t dma1_status; + unsigned long flags; + + // check for fifo overrun + if (status & ADC_OVERRUN_BIT) { + comedi_error(dev, "fifo overrun"); + async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; + } + // spin lock makes sure noone else changes plx dma control reg + comedi_spin_lock_irqsave(&dev->spinlock, flags); + dma1_status = readb(priv(dev)->plx9080_iobase + PLX_DMA1_CS_REG); + if (plx_status & ICS_DMA1_A) { // dma chan 1 interrupt + writeb((dma1_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT, + priv(dev)->plx9080_iobase + PLX_DMA1_CS_REG); + DEBUG_PRINT("dma1 status 0x%x\n", dma1_status); + + if (dma1_status & PLX_DMA_EN_BIT) { + drain_dma_buffers(dev, 1); + } + DEBUG_PRINT(" cleared dma ch1 interrupt\n"); + } + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + + if (status & ADC_DONE_BIT) + DEBUG_PRINT("adc done interrupt\n"); + + // drain fifo with pio + if ((status & ADC_DONE_BIT) || + ((cmd->flags & TRIG_WAKE_EOS) && + (status & ADC_INTR_PENDING_BIT) && + (board(dev)->layout != LAYOUT_4020))) { + DEBUG_PRINT("pio fifo drain\n"); + comedi_spin_lock_irqsave(&dev->spinlock, flags); + if (priv(dev)->ai_cmd_running) { + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + pio_drain_ai_fifo(dev); + } else + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + } + // if we are have all the data, then quit + if ((cmd->stop_src == TRIG_COUNT && priv(dev)->ai_count <= 0) || + (cmd->stop_src == TRIG_EXT && (status & ADC_STOP_BIT))) { + async->events |= COMEDI_CB_EOA; + } + + cfc_handle_events(dev, s); +} + +static inline unsigned int prev_ao_dma_index(comedi_device * dev) +{ + unsigned int buffer_index; + + if (priv(dev)->ao_dma_index == 0) + buffer_index = AO_DMA_RING_COUNT - 1; + else + buffer_index = priv(dev)->ao_dma_index - 1; + return buffer_index; +} + +static int last_ao_dma_load_completed(comedi_device * dev) +{ + unsigned int buffer_index; + unsigned int transfer_address; + unsigned short dma_status; + + buffer_index = prev_ao_dma_index(dev); + dma_status = readb(priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG); + if ((dma_status & PLX_DMA_DONE_BIT) == 0) + return 0; + + transfer_address = + readl(priv(dev)->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG); + if (transfer_address != priv(dev)->ao_buffer_bus_addr[buffer_index]) + return 0; + + return 1; +} + +static int ao_stopped_by_error(comedi_device * dev, const comedi_cmd * cmd) +{ + if (cmd->stop_src == TRIG_NONE) + return 1; + if (cmd->stop_src == TRIG_COUNT) { + if (priv(dev)->ao_count) + return 1; + if (last_ao_dma_load_completed(dev) == 0) + return 1; + } + return 0; +} + +static inline int ao_dma_needs_restart(comedi_device * dev, + unsigned short dma_status) +{ + if ((dma_status & PLX_DMA_DONE_BIT) == 0 || + (dma_status & PLX_DMA_EN_BIT) == 0) + return 0; + if (last_ao_dma_load_completed(dev)) + return 0; + + return 1; +} + +static void restart_ao_dma(comedi_device * dev) +{ + unsigned int dma_desc_bits; + + dma_desc_bits = + readl(priv(dev)->plx9080_iobase + PLX_DMA0_DESCRIPTOR_REG); + dma_desc_bits &= ~PLX_END_OF_CHAIN_BIT; + DEBUG_PRINT("restarting ao dma, descriptor reg 0x%x\n", dma_desc_bits); + load_first_dma_descriptor(dev, 0, dma_desc_bits); + + dma_start_sync(dev, 0); +} + +static void handle_ao_interrupt(comedi_device * dev, unsigned short status, + unsigned int plx_status) +{ + comedi_subdevice *s = dev->write_subdev; + comedi_async *async; + comedi_cmd *cmd; + uint8_t dma0_status; + unsigned long flags; + + /* board might not support ao, in which case write_subdev is NULL */ + if (s == NULL) + return; + async = s->async; + cmd = &async->cmd; + + // spin lock makes sure noone else changes plx dma control reg + comedi_spin_lock_irqsave(&dev->spinlock, flags); + dma0_status = readb(priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG); + if (plx_status & ICS_DMA0_A) { // dma chan 0 interrupt + if ((dma0_status & PLX_DMA_EN_BIT) + && !(dma0_status & PLX_DMA_DONE_BIT)) + writeb(PLX_DMA_EN_BIT | PLX_CLEAR_DMA_INTR_BIT, + priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG); + else + writeb(PLX_CLEAR_DMA_INTR_BIT, + priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG); + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + DEBUG_PRINT("dma0 status 0x%x\n", dma0_status); + if (dma0_status & PLX_DMA_EN_BIT) { + load_ao_dma(dev, cmd); + /* try to recover from dma end-of-chain event */ + if (ao_dma_needs_restart(dev, dma0_status)) + restart_ao_dma(dev); + } + DEBUG_PRINT(" cleared dma ch0 interrupt\n"); + } else + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + + if ((status & DAC_DONE_BIT)) { + async->events |= COMEDI_CB_EOA; + if (ao_stopped_by_error(dev, cmd)) + async->events |= COMEDI_CB_ERROR; + DEBUG_PRINT("plx dma0 desc reg 0x%x\n", + readl(priv(dev)->plx9080_iobase + + PLX_DMA0_DESCRIPTOR_REG)); + DEBUG_PRINT("plx dma0 address reg 0x%x\n", + readl(priv(dev)->plx9080_iobase + + PLX_DMA0_PCI_ADDRESS_REG)); + } + cfc_handle_events(dev, s); +} + +static irqreturn_t handle_interrupt(int irq, void *d PT_REGS_ARG) +{ + comedi_device *dev = d; + unsigned short status; + uint32_t plx_status; + uint32_t plx_bits; + + plx_status = readl(priv(dev)->plx9080_iobase + PLX_INTRCS_REG); + status = readw(priv(dev)->main_iobase + HW_STATUS_REG); + + DEBUG_PRINT("cb_pcidas64: hw status 0x%x ", status); + DEBUG_PRINT("plx status 0x%x\n", plx_status); + + /* an interrupt before all the postconfig stuff gets done could + * cause a NULL dereference if we continue through the + * interrupt handler */ + if (dev->attached == 0) { + DEBUG_PRINT("cb_pcidas64: premature interrupt, ignoring", + status); + return IRQ_HANDLED; + } + handle_ai_interrupt(dev, status, plx_status); + handle_ao_interrupt(dev, status, plx_status); + + // clear possible plx9080 interrupt sources + if (plx_status & ICS_LDIA) { // clear local doorbell interrupt + plx_bits = readl(priv(dev)->plx9080_iobase + PLX_DBR_OUT_REG); + writel(plx_bits, priv(dev)->plx9080_iobase + PLX_DBR_OUT_REG); + DEBUG_PRINT(" cleared local doorbell bits 0x%x\n", plx_bits); + } + + DEBUG_PRINT("exiting handler\n"); + + return IRQ_HANDLED; +} + +void abort_dma(comedi_device * dev, unsigned int channel) +{ + unsigned long flags; + + // spinlock for plx dma control/status reg + comedi_spin_lock_irqsave(&dev->spinlock, flags); + + plx9080_abort_dma(priv(dev)->plx9080_iobase, channel); + + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); +} + +static int ai_cancel(comedi_device * dev, comedi_subdevice * s) +{ + unsigned long flags; + + comedi_spin_lock_irqsave(&dev->spinlock, flags); + if (priv(dev)->ai_cmd_running == 0) { + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + return 0; + } + priv(dev)->ai_cmd_running = 0; + comedi_spin_unlock_irqrestore(&dev->spinlock, flags); + + disable_ai_pacing(dev); + + abort_dma(dev, 1); + + DEBUG_PRINT("ai canceled\n"); + return 0; +} + +static int ao_winsn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int chan = CR_CHAN(insn->chanspec); + int range = CR_RANGE(insn->chanspec); + + // do some initializing + writew(0, priv(dev)->main_iobase + DAC_CONTROL0_REG); + + // set range + set_dac_range_bits(dev, &priv(dev)->dac_control1_bits, chan, range); + writew(priv(dev)->dac_control1_bits, + priv(dev)->main_iobase + DAC_CONTROL1_REG); + + // write to channel + if (board(dev)->layout == LAYOUT_4020) { + writew(data[0] & 0xff, + priv(dev)->main_iobase + dac_lsb_4020_reg(chan)); + writew((data[0] >> 8) & 0xf, + priv(dev)->main_iobase + dac_msb_4020_reg(chan)); + } else { + writew(data[0], priv(dev)->main_iobase + dac_convert_reg(chan)); + } + + // remember output value + priv(dev)->ao_value[chan] = data[0]; + + return 1; +} + +static int ao_readback_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + data[0] = priv(dev)->ao_value[CR_CHAN(insn->chanspec)]; + + return 1; +} + +static void set_dac_control0_reg(comedi_device * dev, const comedi_cmd * cmd) +{ + unsigned int bits = DAC_ENABLE_BIT | WAVEFORM_GATE_LEVEL_BIT | + WAVEFORM_GATE_ENABLE_BIT | WAVEFORM_GATE_SELECT_BIT; + + if (cmd->start_src == TRIG_EXT) { + bits |= WAVEFORM_TRIG_EXT_BITS; + if (cmd->start_arg & CR_INVERT) + bits |= WAVEFORM_TRIG_FALLING_BIT; + } else { + bits |= WAVEFORM_TRIG_SOFT_BITS; + } + if (cmd->scan_begin_src == TRIG_EXT) { + bits |= DAC_EXT_UPDATE_ENABLE_BIT; + if (cmd->scan_begin_arg & CR_INVERT) + bits |= DAC_EXT_UPDATE_FALLING_BIT; + } + writew(bits, priv(dev)->main_iobase + DAC_CONTROL0_REG); +} + +static void set_dac_control1_reg(comedi_device * dev, const comedi_cmd * cmd) +{ + int i; + + for (i = 0; i < cmd->chanlist_len; i++) { + int channel, range; + + channel = CR_CHAN(cmd->chanlist[i]); + range = CR_RANGE(cmd->chanlist[i]); + set_dac_range_bits(dev, &priv(dev)->dac_control1_bits, channel, + range); + } + priv(dev)->dac_control1_bits |= DAC_SW_GATE_BIT; + writew(priv(dev)->dac_control1_bits, + priv(dev)->main_iobase + DAC_CONTROL1_REG); +} + +static void set_dac_select_reg(comedi_device * dev, const comedi_cmd * cmd) +{ + uint16_t bits; + unsigned int first_channel, last_channel; + + first_channel = CR_CHAN(cmd->chanlist[0]); + last_channel = CR_CHAN(cmd->chanlist[cmd->chanlist_len - 1]); + if (last_channel < first_channel) + comedi_error(dev, "bug! last ao channel < first ao channel"); + + bits = (first_channel & 0x7) | (last_channel & 0x7) << 3; + + writew(bits, priv(dev)->main_iobase + DAC_SELECT_REG); +} + +static void set_dac_interval_regs(comedi_device * dev, const comedi_cmd * cmd) +{ + unsigned int divisor; + + if (cmd->scan_begin_src != TRIG_TIMER) + return; + + divisor = get_ao_divisor(cmd->scan_begin_arg, cmd->flags); + if (divisor > max_counter_value) { + comedi_error(dev, "bug! ao divisor too big"); + divisor = max_counter_value; + } + writew(divisor & 0xffff, + priv(dev)->main_iobase + DAC_SAMPLE_INTERVAL_LOWER_REG); + writew((divisor >> 16) & 0xff, + priv(dev)->main_iobase + DAC_SAMPLE_INTERVAL_UPPER_REG); +} + +static unsigned int load_ao_dma_buffer(comedi_device * dev, + const comedi_cmd * cmd) +{ + unsigned int num_bytes, buffer_index, prev_buffer_index; + unsigned int next_bits; + + buffer_index = priv(dev)->ao_dma_index; + prev_buffer_index = prev_ao_dma_index(dev); + + DEBUG_PRINT("attempting to load ao buffer %i (0x%x)\n", buffer_index, + priv(dev)->ao_buffer_bus_addr[buffer_index]); + + num_bytes = comedi_buf_read_n_available(dev->write_subdev->async); + if (num_bytes > DMA_BUFFER_SIZE) + num_bytes = DMA_BUFFER_SIZE; + if (cmd->stop_src == TRIG_COUNT && num_bytes > priv(dev)->ao_count) + num_bytes = priv(dev)->ao_count; + num_bytes -= num_bytes % bytes_in_sample; + + if (num_bytes == 0) + return 0; + + DEBUG_PRINT("loading %i bytes\n", num_bytes); + + num_bytes = cfc_read_array_from_buffer(dev->write_subdev, + priv(dev)->ao_buffer[buffer_index], num_bytes); + priv(dev)->ao_dma_desc[buffer_index].transfer_size = + cpu_to_le32(num_bytes); + /* set end of chain bit so we catch underruns */ + next_bits = le32_to_cpu(priv(dev)->ao_dma_desc[buffer_index].next); + next_bits |= PLX_END_OF_CHAIN_BIT; + priv(dev)->ao_dma_desc[buffer_index].next = cpu_to_le32(next_bits); + /* clear end of chain bit on previous buffer now that we have set it + * for the last buffer */ + next_bits = le32_to_cpu(priv(dev)->ao_dma_desc[prev_buffer_index].next); + next_bits &= ~PLX_END_OF_CHAIN_BIT; + priv(dev)->ao_dma_desc[prev_buffer_index].next = cpu_to_le32(next_bits); + + priv(dev)->ao_dma_index = (buffer_index + 1) % AO_DMA_RING_COUNT; + priv(dev)->ao_count -= num_bytes; + + return num_bytes; +} + +static void load_ao_dma(comedi_device * dev, const comedi_cmd * cmd) +{ + unsigned int num_bytes; + unsigned int next_transfer_addr; + void *pci_addr_reg = + priv(dev)->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG; + unsigned int buffer_index; + + do { + buffer_index = priv(dev)->ao_dma_index; + /* don't overwrite data that hasn't been transferred yet */ + next_transfer_addr = readl(pci_addr_reg); + if (next_transfer_addr >= + priv(dev)->ao_buffer_bus_addr[buffer_index] + && next_transfer_addr < + priv(dev)->ao_buffer_bus_addr[buffer_index] + + DMA_BUFFER_SIZE) + return; + num_bytes = load_ao_dma_buffer(dev, cmd); + } while (num_bytes >= DMA_BUFFER_SIZE); +} + +static int prep_ao_dma(comedi_device * dev, const comedi_cmd * cmd) +{ + unsigned int num_bytes; + int i; + + /* clear queue pointer too, since external queue has + * weird interactions with ao fifo */ + writew(0, priv(dev)->main_iobase + ADC_QUEUE_CLEAR_REG); + writew(0, priv(dev)->main_iobase + DAC_BUFFER_CLEAR_REG); + + num_bytes = (DAC_FIFO_SIZE / 2) * bytes_in_sample; + if (cmd->stop_src == TRIG_COUNT && + num_bytes / bytes_in_sample > priv(dev)->ao_count) + num_bytes = priv(dev)->ao_count * bytes_in_sample; + num_bytes = cfc_read_array_from_buffer(dev->write_subdev, + priv(dev)->ao_bounce_buffer, num_bytes); + for (i = 0; i < num_bytes / bytes_in_sample; i++) { + writew(priv(dev)->ao_bounce_buffer[i], + priv(dev)->main_iobase + DAC_FIFO_REG); + } + priv(dev)->ao_count -= num_bytes / bytes_in_sample; + if (cmd->stop_src == TRIG_COUNT && priv(dev)->ao_count == 0) + return 0; + num_bytes = load_ao_dma_buffer(dev, cmd); + if (num_bytes == 0) + return -1; + if (num_bytes >= DMA_BUFFER_SIZE) ; + load_ao_dma(dev, cmd); + + dma_start_sync(dev, 0); + + return 0; +} + +static inline int external_ai_queue_in_use(comedi_device * dev) +{ + if (dev->read_subdev->busy) + return 0; + if (board(dev)->layout == LAYOUT_4020) + return 0; + else if (use_internal_queue_6xxx(&dev->read_subdev->async->cmd)) + return 0; + return 1; +} + +static int ao_cmd(comedi_device * dev, comedi_subdevice * s) +{ + comedi_cmd *cmd = &s->async->cmd; + + if (external_ai_queue_in_use(dev)) { + warn_external_queue(dev); + return -EBUSY; + } + /* disable analog output system during setup */ + writew(0x0, priv(dev)->main_iobase + DAC_CONTROL0_REG); + + priv(dev)->ao_dma_index = 0; + priv(dev)->ao_count = cmd->stop_arg * cmd->chanlist_len; + + set_dac_select_reg(dev, cmd); + set_dac_interval_regs(dev, cmd); + load_first_dma_descriptor(dev, 0, priv(dev)->ao_dma_desc_bus_addr | + PLX_DESC_IN_PCI_BIT | PLX_INTR_TERM_COUNT); + + set_dac_control1_reg(dev, cmd); + s->async->inttrig = ao_inttrig; + + return 0; +} + +static int ao_inttrig(comedi_device * dev, comedi_subdevice * s, + unsigned int trig_num) +{ + comedi_cmd *cmd = &s->async->cmd; + int retval; + + if (trig_num != 0) + return -EINVAL; + + retval = prep_ao_dma(dev, cmd); + if (retval < 0) + return -EPIPE; + + set_dac_control0_reg(dev, cmd); + + if (cmd->start_src == TRIG_INT) + writew(0, priv(dev)->main_iobase + DAC_START_REG); + + s->async->inttrig = NULL; + + return 0; +} + +static int ao_cmdtest(comedi_device * dev, comedi_subdevice * s, + comedi_cmd * cmd) +{ + int err = 0; + int tmp; + unsigned int tmp_arg; + int i; + + /* step 1: make sure trigger sources are trivially valid */ + + tmp = cmd->start_src; + cmd->start_src &= TRIG_INT | TRIG_EXT; + if (!cmd->start_src || tmp != cmd->start_src) + err++; + + tmp = cmd->scan_begin_src; + cmd->scan_begin_src &= TRIG_TIMER | TRIG_EXT; + if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src) + err++; + + tmp = cmd->convert_src; + cmd->convert_src &= TRIG_NOW; + if (!cmd->convert_src || tmp != cmd->convert_src) + err++; + + tmp = cmd->scan_end_src; + cmd->scan_end_src &= TRIG_COUNT; + if (!cmd->scan_end_src || tmp != cmd->scan_end_src) + err++; + + tmp = cmd->stop_src; + cmd->stop_src &= TRIG_NONE; + if (!cmd->stop_src || tmp != cmd->stop_src) + err++; + + if (err) + return 1; + + /* step 2: make sure trigger sources are unique and mutually compatible */ + + // uniqueness check + if (cmd->start_src != TRIG_INT && cmd->start_src != TRIG_EXT) + err++; + if (cmd->scan_begin_src != TRIG_TIMER && + cmd->scan_begin_src != TRIG_EXT) + err++; + + // compatibility check + if (cmd->convert_src == TRIG_EXT && cmd->scan_begin_src == TRIG_TIMER) + err++; + if (cmd->stop_src != TRIG_COUNT && + cmd->stop_src != TRIG_NONE && cmd->stop_src != TRIG_EXT) + err++; + + if (err) + return 2; + + /* step 3: make sure arguments are trivially compatible */ + + if (cmd->scan_begin_src == TRIG_TIMER) { + if (cmd->scan_begin_arg < board(dev)->ao_scan_speed) { + cmd->scan_begin_arg = board(dev)->ao_scan_speed; + err++; + } + if (get_ao_divisor(cmd->scan_begin_arg, + cmd->flags) > max_counter_value) { + cmd->scan_begin_arg = + (max_counter_value + 2) * TIMER_BASE; + err++; + } + } + + if (!cmd->chanlist_len) { + cmd->chanlist_len = 1; + err++; + } + if (cmd->scan_end_arg != cmd->chanlist_len) { + cmd->scan_end_arg = cmd->chanlist_len; + err++; + } + + if (err) + return 3; + + /* step 4: fix up any arguments */ + + if (cmd->scan_begin_src == TRIG_TIMER) { + tmp_arg = cmd->scan_begin_arg; + cmd->scan_begin_arg = + get_divisor(cmd->scan_begin_arg, + cmd->flags) * TIMER_BASE; + if (tmp_arg != cmd->scan_begin_arg) + err++; + } + + if (err) + return 4; + + if (cmd->chanlist) { + unsigned int first_channel = CR_CHAN(cmd->chanlist[0]); + for (i = 1; i < cmd->chanlist_len; i++) { + if (CR_CHAN(cmd->chanlist[i]) != first_channel + i) { + comedi_error(dev, + "chanlist must use consecutive channels"); + err++; + break; + } + } + } + + if (err) + return 5; + + return 0; +} + +static int ao_cancel(comedi_device * dev, comedi_subdevice * s) +{ + writew(0x0, priv(dev)->main_iobase + DAC_CONTROL0_REG); + abort_dma(dev, 0); + return 0; +} + +static int dio_callback(int dir, int port, int data, unsigned long iobase) +{ + if (dir) { + writeb(data, (void *)(iobase + port)); + DEBUG_PRINT("wrote 0x%x to port %i\n", data, port); + return 0; + } else { + return readb((void *)(iobase + port)); + } +} + +static int dio_callback_4020(int dir, int port, int data, unsigned long iobase) +{ + if (dir) { + writew(data, (void *)(iobase + 2 * port)); + return 0; + } else { + return readw((void *)(iobase + 2 * port)); + } +} + +static int di_rbits(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + lsampl_t bits; + + bits = readb(priv(dev)->dio_counter_iobase + DI_REG); + bits &= 0xf; + data[1] = bits; + data[0] = 0; + + return 2; +} + +static int do_wbits(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + data[0] &= 0xf; + // zero bits we are going to change + s->state &= ~data[0]; + // set new bits + s->state |= data[0] & data[1]; + + writeb(s->state, priv(dev)->dio_counter_iobase + DO_REG); + + data[1] = s->state; + + return 2; +} + +static int dio_60xx_config_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + unsigned int mask; + + mask = 1 << CR_CHAN(insn->chanspec); + + switch (data[0]) { + case INSN_CONFIG_DIO_INPUT: + s->io_bits &= ~mask; + break; + case INSN_CONFIG_DIO_OUTPUT: + s->io_bits |= mask; + break; + case INSN_CONFIG_DIO_QUERY: + data[1] = (s->io_bits & mask) ? COMEDI_OUTPUT : COMEDI_INPUT; + return 2; + default: + return -EINVAL; + } + + writeb(s->io_bits, + priv(dev)->dio_counter_iobase + DIO_DIRECTION_60XX_REG); + + return 1; +} + +static int dio_60xx_wbits(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + if (data[0]) { + s->state &= ~data[0]; + s->state |= (data[0] & data[1]); + writeb(s->state, + priv(dev)->dio_counter_iobase + DIO_DATA_60XX_REG); + } + + data[1] = readb(priv(dev)->dio_counter_iobase + DIO_DATA_60XX_REG); + + return 2; +} + +static void caldac_write(comedi_device * dev, unsigned int channel, + unsigned int value) +{ + priv(dev)->caldac_state[channel] = value; + + switch (board(dev)->layout) { + case LAYOUT_60XX: + case LAYOUT_64XX: + caldac_8800_write(dev, channel, value); + break; + case LAYOUT_4020: + caldac_i2c_write(dev, channel, value); + break; + default: + break; + } +} + +static int calib_write_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int channel = CR_CHAN(insn->chanspec); + + /* return immediately if setting hasn't changed, since + * programming these things is slow */ + if (priv(dev)->caldac_state[channel] == data[0]) + return 1; + + caldac_write(dev, channel, data[0]); + + return 1; +} + +static int calib_read_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + unsigned int channel = CR_CHAN(insn->chanspec); + + data[0] = priv(dev)->caldac_state[channel]; + + return 1; +} + +static void ad8402_write(comedi_device * dev, unsigned int channel, + unsigned int value) +{ + static const int bitstream_length = 10; + unsigned int bit, register_bits; + unsigned int bitstream = ((channel & 0x3) << 8) | (value & 0xff); + static const int ad8402_comedi_udelay = 1; + + priv(dev)->ad8402_state[channel] = value; + + register_bits = SELECT_8402_64XX_BIT; + comedi_udelay(ad8402_comedi_udelay); + writew(register_bits, priv(dev)->main_iobase + CALIBRATION_REG); + + for (bit = 1 << (bitstream_length - 1); bit; bit >>= 1) { + if (bitstream & bit) + register_bits |= SERIAL_DATA_IN_BIT; + else + register_bits &= ~SERIAL_DATA_IN_BIT; + comedi_udelay(ad8402_comedi_udelay); + writew(register_bits, priv(dev)->main_iobase + CALIBRATION_REG); + comedi_udelay(ad8402_comedi_udelay); + writew(register_bits | SERIAL_CLOCK_BIT, + priv(dev)->main_iobase + CALIBRATION_REG); + } + + comedi_udelay(ad8402_comedi_udelay); + writew(0, priv(dev)->main_iobase + CALIBRATION_REG); +} + +/* for pci-das6402/16, channel 0 is analog input gain and channel 1 is offset */ +static int ad8402_write_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int channel = CR_CHAN(insn->chanspec); + + /* return immediately if setting hasn't changed, since + * programming these things is slow */ + if (priv(dev)->ad8402_state[channel] == data[0]) + return 1; + + priv(dev)->ad8402_state[channel] = data[0]; + + ad8402_write(dev, channel, data[0]); + + return 1; +} + +static int ad8402_read_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + unsigned int channel = CR_CHAN(insn->chanspec); + + data[0] = priv(dev)->ad8402_state[channel]; + + return 1; +} + +static uint16_t read_eeprom(comedi_device * dev, uint8_t address) +{ + static const int bitstream_length = 11; + static const int read_command = 0x6; + unsigned int bitstream = (read_command << 8) | address; + unsigned int bit; + void *const plx_control_addr = + priv(dev)->plx9080_iobase + PLX_CONTROL_REG; + uint16_t value; + static const int value_length = 16; + static const int eeprom_comedi_udelay = 1; + + comedi_udelay(eeprom_comedi_udelay); + priv(dev)->plx_control_bits &= ~CTL_EE_CLK & ~CTL_EE_CS; + // make sure we don't send anything to the i2c bus on 4020 + priv(dev)->plx_control_bits |= CTL_USERO; + writel(priv(dev)->plx_control_bits, plx_control_addr); + // activate serial eeprom + comedi_udelay(eeprom_comedi_udelay); + priv(dev)->plx_control_bits |= CTL_EE_CS; + writel(priv(dev)->plx_control_bits, plx_control_addr); + + // write read command and desired memory address + for (bit = 1 << (bitstream_length - 1); bit; bit >>= 1) { + // set bit to be written + comedi_udelay(eeprom_comedi_udelay); + if (bitstream & bit) + priv(dev)->plx_control_bits |= CTL_EE_W; + else + priv(dev)->plx_control_bits &= ~CTL_EE_W; + writel(priv(dev)->plx_control_bits, plx_control_addr); + // clock in bit + comedi_udelay(eeprom_comedi_udelay); + priv(dev)->plx_control_bits |= CTL_EE_CLK; + writel(priv(dev)->plx_control_bits, plx_control_addr); + comedi_udelay(eeprom_comedi_udelay); + priv(dev)->plx_control_bits &= ~CTL_EE_CLK; + writel(priv(dev)->plx_control_bits, plx_control_addr); + } + // read back value from eeprom memory location + value = 0; + for (bit = 1 << (value_length - 1); bit; bit >>= 1) { + // clock out bit + comedi_udelay(eeprom_comedi_udelay); + priv(dev)->plx_control_bits |= CTL_EE_CLK; + writel(priv(dev)->plx_control_bits, plx_control_addr); + comedi_udelay(eeprom_comedi_udelay); + priv(dev)->plx_control_bits &= ~CTL_EE_CLK; + writel(priv(dev)->plx_control_bits, plx_control_addr); + comedi_udelay(eeprom_comedi_udelay); + if (readl(plx_control_addr) & CTL_EE_R) + value |= bit; + } + + // deactivate eeprom serial input + comedi_udelay(eeprom_comedi_udelay); + priv(dev)->plx_control_bits &= ~CTL_EE_CS; + writel(priv(dev)->plx_control_bits, plx_control_addr); + + return value; +} + +static int eeprom_read_insn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + data[0] = read_eeprom(dev, CR_CHAN(insn->chanspec)); + + return 1; +} + +/* utility function that rounds desired timing to an achievable time, and + * sets cmd members appropriately. + * adc paces conversions from master clock by dividing by (x + 3) where x is 24 bit number + */ +static void check_adc_timing(comedi_device * dev, comedi_cmd * cmd) +{ + unsigned int convert_divisor = 0, scan_divisor; + static const int min_convert_divisor = 3; + static const int max_convert_divisor = + max_counter_value + min_convert_divisor; + static const int min_scan_divisor_4020 = 2; + unsigned long long max_scan_divisor, min_scan_divisor; + + if (cmd->convert_src == TRIG_TIMER) { + if (board(dev)->layout == LAYOUT_4020) { + cmd->convert_arg = 0; + } else { + convert_divisor = + get_divisor(cmd->convert_arg, cmd->flags); + if (convert_divisor > max_convert_divisor) + convert_divisor = max_convert_divisor; + if (convert_divisor < min_convert_divisor) + convert_divisor = min_convert_divisor; + cmd->convert_arg = convert_divisor * TIMER_BASE; + } + } else if (cmd->convert_src == TRIG_NOW) + cmd->convert_arg = 0; + + if (cmd->scan_begin_src == TRIG_TIMER) { + scan_divisor = get_divisor(cmd->scan_begin_arg, cmd->flags); + if (cmd->convert_src == TRIG_TIMER) { + // XXX check for integer overflows + min_scan_divisor = convert_divisor * cmd->chanlist_len; + max_scan_divisor = + (convert_divisor * cmd->chanlist_len - 1) + + max_counter_value; + } else { + min_scan_divisor = min_scan_divisor_4020; + max_scan_divisor = max_counter_value + min_scan_divisor; + } + if (scan_divisor > max_scan_divisor) + scan_divisor = max_scan_divisor; + if (scan_divisor < min_scan_divisor) + scan_divisor = min_scan_divisor; + cmd->scan_begin_arg = scan_divisor * TIMER_BASE; + } + + return; +} + +/* Gets nearest achievable timing given master clock speed, does not + * take into account possible minimum/maximum divisor values. Used + * by other timing checking functions. */ +static unsigned int get_divisor(unsigned int ns, unsigned int flags) +{ + unsigned int divisor; + + switch (flags & TRIG_ROUND_MASK) { + case TRIG_ROUND_UP: + divisor = (ns + TIMER_BASE - 1) / TIMER_BASE; + break; + case TRIG_ROUND_DOWN: + divisor = ns / TIMER_BASE; + break; + case TRIG_ROUND_NEAREST: + default: + divisor = (ns + TIMER_BASE / 2) / TIMER_BASE; + break; + } + return divisor; +} + +static unsigned int get_ao_divisor(unsigned int ns, unsigned int flags) +{ + return get_divisor(ns, flags) - 2; +} + +// adjusts the size of hardware fifo (which determines block size for dma xfers) +static int set_ai_fifo_size(comedi_device * dev, unsigned int num_samples) +{ + unsigned int num_fifo_entries; + int retval; + const hw_fifo_info_t *const fifo = board(dev)->ai_fifo; + + num_fifo_entries = num_samples / fifo->sample_packing_ratio; + + retval = set_ai_fifo_segment_length(dev, + num_fifo_entries / fifo->num_segments); + if (retval < 0) + return retval; + + num_samples = retval * fifo->num_segments * fifo->sample_packing_ratio; + + DEBUG_PRINT("set hardware fifo size to %i\n", num_samples); + + return num_samples; +} + +// query length of fifo +static unsigned int ai_fifo_size(comedi_device * dev) +{ + return priv(dev)->ai_fifo_segment_length * + board(dev)->ai_fifo->num_segments * + board(dev)->ai_fifo->sample_packing_ratio; +} + +static int set_ai_fifo_segment_length(comedi_device * dev, + unsigned int num_entries) +{ + static const int increment_size = 0x100; + const hw_fifo_info_t *const fifo = board(dev)->ai_fifo; + unsigned int num_increments; + uint16_t bits; + + if (num_entries < increment_size) + num_entries = increment_size; + if (num_entries > fifo->max_segment_length) + num_entries = fifo->max_segment_length; + + // 1 == 256 entries, 2 == 512 entries, etc + num_increments = (num_entries + increment_size / 2) / increment_size; + + bits = (~(num_increments - 1)) & fifo->fifo_size_reg_mask; + priv(dev)->fifo_size_bits &= ~fifo->fifo_size_reg_mask; + priv(dev)->fifo_size_bits |= bits; + writew(priv(dev)->fifo_size_bits, + priv(dev)->main_iobase + FIFO_SIZE_REG); + + priv(dev)->ai_fifo_segment_length = num_increments * increment_size; + + DEBUG_PRINT("set hardware fifo segment length to %i\n", + priv(dev)->ai_fifo_segment_length); + + return priv(dev)->ai_fifo_segment_length; +} + +/* pci-6025 8800 caldac: + * address 0 == dac channel 0 offset + * address 1 == dac channel 0 gain + * address 2 == dac channel 1 offset + * address 3 == dac channel 1 gain + * address 4 == fine adc offset + * address 5 == coarse adc offset + * address 6 == coarse adc gain + * address 7 == fine adc gain + */ +/* pci-6402/16 uses all 8 channels for dac: + * address 0 == dac channel 0 fine gain + * address 1 == dac channel 0 coarse gain + * address 2 == dac channel 0 coarse offset + * address 3 == dac channel 1 coarse offset + * address 4 == dac channel 1 fine gain + * address 5 == dac channel 1 coarse gain + * address 6 == dac channel 0 fine offset + * address 7 == dac channel 1 fine offset +*/ + +static int caldac_8800_write(comedi_device * dev, unsigned int address, + uint8_t value) +{ + static const int num_caldac_channels = 8; + static const int bitstream_length = 11; + unsigned int bitstream = ((address & 0x7) << 8) | value; + unsigned int bit, register_bits; + static const int caldac_8800_udelay = 1; + + if (address >= num_caldac_channels) { + comedi_error(dev, "illegal caldac channel"); + return -1; + } + for (bit = 1 << (bitstream_length - 1); bit; bit >>= 1) { + register_bits = 0; + if (bitstream & bit) + register_bits |= SERIAL_DATA_IN_BIT; + comedi_udelay(caldac_8800_udelay); + writew(register_bits, priv(dev)->main_iobase + CALIBRATION_REG); + register_bits |= SERIAL_CLOCK_BIT; + comedi_udelay(caldac_8800_udelay); + writew(register_bits, priv(dev)->main_iobase + CALIBRATION_REG); + } + comedi_udelay(caldac_8800_udelay); + writew(SELECT_8800_BIT, priv(dev)->main_iobase + CALIBRATION_REG); + comedi_udelay(caldac_8800_udelay); + writew(0, priv(dev)->main_iobase + CALIBRATION_REG); + comedi_udelay(caldac_8800_udelay); + return 0; +} + +// 4020 caldacs +static int caldac_i2c_write(comedi_device * dev, unsigned int caldac_channel, + unsigned int value) +{ + uint8_t serial_bytes[3]; + uint8_t i2c_addr; + enum pointer_bits { + // manual has gain and offset bits switched + OFFSET_0_2 = 0x1, + GAIN_0_2 = 0x2, + OFFSET_1_3 = 0x4, + GAIN_1_3 = 0x8, + }; + enum data_bits { + NOT_CLEAR_REGISTERS = 0x20, + }; + + switch (caldac_channel) { + case 0: // chan 0 offset + i2c_addr = CALDAC0_I2C_ADDR; + serial_bytes[0] = OFFSET_0_2; + break; + case 1: // chan 1 offset + i2c_addr = CALDAC0_I2C_ADDR; + serial_bytes[0] = OFFSET_1_3; + break; + case 2: // chan 2 offset + i2c_addr = CALDAC1_I2C_ADDR; + serial_bytes[0] = OFFSET_0_2; + break; + case 3: // chan 3 offset + i2c_addr = CALDAC1_I2C_ADDR; + serial_bytes[0] = OFFSET_1_3; + break; + case 4: // chan 0 gain + i2c_addr = CALDAC0_I2C_ADDR; + serial_bytes[0] = GAIN_0_2; + break; + case 5: // chan 1 gain + i2c_addr = CALDAC0_I2C_ADDR; + serial_bytes[0] = GAIN_1_3; + break; + case 6: // chan 2 gain + i2c_addr = CALDAC1_I2C_ADDR; + serial_bytes[0] = GAIN_0_2; + break; + case 7: // chan 3 gain + i2c_addr = CALDAC1_I2C_ADDR; + serial_bytes[0] = GAIN_1_3; + break; + default: + comedi_error(dev, "invalid caldac channel\n"); + return -1; + break; + } + serial_bytes[1] = NOT_CLEAR_REGISTERS | ((value >> 8) & 0xf); + serial_bytes[2] = value & 0xff; + i2c_write(dev, i2c_addr, serial_bytes, 3); + return 0; +} + +// Their i2c requires a huge delay on setting clock or data high for some reason +static const int i2c_high_comedi_udelay = 1000; +static const int i2c_low_comedi_udelay = 10; + +// set i2c data line high or low +static void i2c_set_sda(comedi_device * dev, int state) +{ + static const int data_bit = CTL_EE_W; + void *plx_control_addr = priv(dev)->plx9080_iobase + PLX_CONTROL_REG; + + if (state) { + // set data line high + priv(dev)->plx_control_bits &= ~data_bit; + writel(priv(dev)->plx_control_bits, plx_control_addr); + comedi_udelay(i2c_high_comedi_udelay); + } else // set data line low + { + priv(dev)->plx_control_bits |= data_bit; + writel(priv(dev)->plx_control_bits, plx_control_addr); + comedi_udelay(i2c_low_comedi_udelay); + } +} + +// set i2c clock line high or low +static void i2c_set_scl(comedi_device * dev, int state) +{ + static const int clock_bit = CTL_USERO; + void *plx_control_addr = priv(dev)->plx9080_iobase + PLX_CONTROL_REG; + + if (state) { + // set clock line high + priv(dev)->plx_control_bits &= ~clock_bit; + writel(priv(dev)->plx_control_bits, plx_control_addr); + comedi_udelay(i2c_high_comedi_udelay); + } else // set clock line low + { + priv(dev)->plx_control_bits |= clock_bit; + writel(priv(dev)->plx_control_bits, plx_control_addr); + comedi_udelay(i2c_low_comedi_udelay); + } +} + +static void i2c_write_byte(comedi_device * dev, uint8_t byte) +{ + uint8_t bit; + unsigned int num_bits = 8; + + DEBUG_PRINT("writing to i2c byte 0x%x\n", byte); + + for (bit = 1 << (num_bits - 1); bit; bit >>= 1) { + i2c_set_scl(dev, 0); + if ((byte & bit)) + i2c_set_sda(dev, 1); + else + i2c_set_sda(dev, 0); + i2c_set_scl(dev, 1); + } +} + +// we can't really read the lines, so fake it +static int i2c_read_ack(comedi_device * dev) +{ + i2c_set_scl(dev, 0); + i2c_set_sda(dev, 1); + i2c_set_scl(dev, 1); + + return 0; // return fake acknowledge bit +} + +// send start bit +static void i2c_start(comedi_device * dev) +{ + i2c_set_scl(dev, 1); + i2c_set_sda(dev, 1); + i2c_set_sda(dev, 0); +} + +// send stop bit +static void i2c_stop(comedi_device * dev) +{ + i2c_set_scl(dev, 0); + i2c_set_sda(dev, 0); + i2c_set_scl(dev, 1); + i2c_set_sda(dev, 1); +} + +static void i2c_write(comedi_device * dev, unsigned int address, + const uint8_t * data, unsigned int length) +{ + unsigned int i; + uint8_t bitstream; + static const int read_bit = 0x1; + +//XXX need mutex to prevent simultaneous attempts to access eeprom and i2c bus + + // make sure we dont send anything to eeprom + priv(dev)->plx_control_bits &= ~CTL_EE_CS; + + i2c_stop(dev); + i2c_start(dev); + + // send address and write bit + bitstream = (address << 1) & ~read_bit; + i2c_write_byte(dev, bitstream); + + // get acknowledge + if (i2c_read_ack(dev) != 0) { + comedi_error(dev, "i2c write failed: no acknowledge"); + i2c_stop(dev); + return; + } + // write data bytes + for (i = 0; i < length; i++) { + i2c_write_byte(dev, data[i]); + if (i2c_read_ack(dev) != 0) { + comedi_error(dev, "i2c write failed: no acknowledge"); + i2c_stop(dev); + return; + } + } + i2c_stop(dev); +} -- 2.7.4