From 8897f3255c9c411b86482e09ccbc3e75a8a201e7 Mon Sep 17 00:00:00 2001 From: Bhaskar Upadhaya Date: Wed, 14 Nov 2018 05:30:52 +0000 Subject: [PATCH] arm64: dts: Add support for NXP LS1028A SoC LS1028A contains two ARM v8 CortexA72 processor cores with 32 KB L1-D cache and 48 KB L1-I cache Features summary Two 32-bit / 64-bit ARM v8 Cortex-A72 CPUs - Arranged as single clusters of two cores sharing a 1 MB L2 cache - Speed Up to 1.3 GHz - Support for cluster power-gating. Cache coherent interconnect (CCI-400) - Hardware-managed data coherency - Up to 400 MHz 32-bit DDR4 SDRAM memory controller with ECC Two PCIe 3.0 controllers One serial ATA (SATA 3.0) controller Two high-speed USB 3.0 controllers with integrated PHY Following levels of DTSI/DTS files have been created for the LS1028A SoC family: - fsl-ls1028a.dtsi: DTS-Include file for NXP LS1028A SoC. - fsl-ls1028a-qds.dts: DTS file for NXP LS1028A QDS board. - fsl-ls1028a-rdb.dts: DTS file for NXP LS1028A RDB board Signed-off-by: Sudhanshu Gupta Signed-off-by: Rai Harninder Signed-off-by: Bhaskar Upadhaya Acked-by: Li Yang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/Makefile | 2 + arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 93 ++++++ arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 73 +++++ arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 339 ++++++++++++++++++++++ 4 files changed, 507 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 9a88530..7748e6d 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -3,6 +3,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts new file mode 100644 index 0000000..14c79f4 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for NXP LS1028A QDS Board. + * + * Copyright 2018 NXP + * + * Harninder Rai + * + */ + +/dts-v1/; + +#include "fsl-ls1028a.dtsi" + +/ { + model = "LS1028A QDS Board"; + compatible = "fsl,ls1028a-qds", "fsl,ls1028a"; + + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + serial0 = &duart0; + serial1 = &duart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x1 0x00000000>; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9847"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + current-monitor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + current-monitor@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + }; + + eeprom@56 { + compatible = "atmel,24c512"; + reg = <0x56>; + }; + + eeprom@57 { + compatible = "atmel,24c512"; + reg = <0x57>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts new file mode 100644 index 0000000..fdeb417 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for NXP LS1028A RDB Board. + * + * Copyright 2018 NXP + * + * Harninder Rai + * + */ + +/dts-v1/; +#include "fsl-ls1028a.dtsi" + +/ { + model = "LS1028A RDB Board"; + compatible = "fsl,ls1028a-rdb", "fsl,ls1028a"; + + aliases { + serial0 = &duart0; + serial1 = &duart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x1 0x0000000>; + }; +}; + +&i2c0 { + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9847"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x02>; + + current-monitor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <500>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + }; + }; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi new file mode 100644 index 0000000..a8cf92a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -0,0 +1,339 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Include file for NXP Layerscape-1028A family SoC. + * + * Copyright 2018 NXP + * + * Harninder Rai + * + */ + +#include +#include + +/ { + compatible = "fsl,ls1028a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0>; + enable-method = "psci"; + clocks = <&clockgen 1 0>; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PH20>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x1>; + enable-method = "psci"; + clocks = <&clockgen 1 0>; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PH20>; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + idle-states { + /* + * PSCI node is not added default, U-boot will add missing + * parts if it determines to use PSCI. + */ + entry-method = "arm,psci"; + + CPU_PH20: cpu-ph20 { + compatible = "arm,idle-state"; + idle-state-name = "PH20"; + arm,psci-suspend-param = <0x00010000>; + entry-latency-us = <1000>; + exit-latency-us = <1000>; + min-residency-us = <3000>; + }; + }; + + sysclk: clock-sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "sysclk"; + }; + + reboot { + compatible ="syscon-reboot"; + regmap = <&dcfg>; + offset = <0xb0>; + mask = <0x02>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + gic: interrupt-controller@6000000 { + compatible= "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + reg= <0x0 0x06000000 0 0x10000>, /* GIC Dist */ + <0x0 0x06040000 0 0x40000>; /* GIC Redistributor */ + #interrupt-cells= <3>; + interrupt-controller; + interrupts = ; + its: gic-its@6020000 { + compatible = "arm,gic-v3-its"; + msi-controller; + reg = <0x0 0x06020000 0 0x20000>;/* GIC Translater */ + }; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ddr: memory-controller@1080000 { + compatible = "fsl,qoriq-memory-controller"; + reg = <0x0 0x1080000 0x0 0x1000>; + interrupts = ; + big-endian; + }; + + dcfg: syscon@1e00000 { + compatible = "fsl,ls1028a-dcfg", "syscon"; + reg = <0x0 0x1e00000 0x0 0x10000>; + big-endian; + }; + + scfg: syscon@1fc0000 { + compatible = "fsl,ls1028a-scfg", "syscon"; + reg = <0x0 0x1fc0000 0x0 0x10000>; + big-endian; + }; + + clockgen: clock-controller@1300000 { + compatible = "fsl,ls1028a-clockgen"; + reg = <0x0 0x1300000 0x0 0xa0000>; + #clock-cells = <2>; + clocks = <&sysclk>; + }; + + i2c0: i2c@2000000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2000000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + i2c1: i2c@2010000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2010000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + i2c2: i2c@2020000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2020000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + i2c3: i2c@2030000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2030000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + i2c4: i2c@2040000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2040000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + i2c5: i2c@2050000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2050000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + i2c6: i2c@2060000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2060000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + i2c7: i2c@2070000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2070000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + duart0: serial@21c0500 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x00 0x21c0500 0x0 0x100>; + interrupts = ; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + duart1: serial@21c0600 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x00 0x21c0600 0x0 0x100>; + interrupts = ; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + gpio1: gpio@2300000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2300000 0x0 0x10000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2310000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2310000 0x0 0x10000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@2320000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2320000 0x0 0x10000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wdog0: watchdog@23c0000 { + compatible = "fsl,ls1028a-wdt", "fsl,imx21-wdt"; + reg = <0x0 0x23c0000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + sata: sata@3200000 { + compatible = "fsl,ls1028a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x0 0x20140520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = ; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + smmu: iommu@5000000 { + compatible = "arm,mmu-500"; + reg = <0 0x5000000 0 0x800000>; + #global-interrupts = <8>; + #iommu-cells = <1>; + stream-match-mask = <0x7c00>; + /* global secure fault */ + interrupts = , + /* combined secure interrupt */ + , + /* global non-secure fault */ + , + /* combined non-secure interrupt */ + , + /* performance counter interrupts 0-7 */ + , , + , , + /* per context interrupt, 64 interrupts */ + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , ; + }; + }; +}; -- 2.7.4