From 86f5ddddcd9c4755e3d1d1ca4be01df5a4ed5d96 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Wed, 8 Jun 2022 00:31:51 +0300 Subject: [PATCH] phy: qcom-qmp-usb: drop support for non-USB PHY types Drop remaining support for PHY types other than USB. Acked-by: Bjorn Andersson Tested-by: Bjorn Andersson # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20220607213203.2819885-19-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul --- drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 435 ++++---------------------------- 1 file changed, 48 insertions(+), 387 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c index 4deafdd..f2e927e 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c @@ -2059,7 +2059,6 @@ static int qcom_qmp_phy_usb_serdes_init(struct qmp_phy *qphy) struct qcom_qmp *qmp = qphy->qmp; const struct qmp_phy_cfg *cfg = qphy->cfg; void __iomem *serdes = qphy->serdes; - const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl; int serdes_tbl_num = cfg->serdes_tbl_num; int ret; @@ -2069,35 +2068,6 @@ static int qcom_qmp_phy_usb_serdes_init(struct qmp_phy *qphy) qcom_qmp_phy_usb_configure(serdes, cfg->regs, cfg->serdes_tbl_sec, cfg->serdes_tbl_num_sec); - if (cfg->type == PHY_TYPE_DP) { - switch (dp_opts->link_rate) { - case 1620: - qcom_qmp_phy_usb_configure(serdes, cfg->regs, - cfg->serdes_tbl_rbr, - cfg->serdes_tbl_rbr_num); - break; - case 2700: - qcom_qmp_phy_usb_configure(serdes, cfg->regs, - cfg->serdes_tbl_hbr, - cfg->serdes_tbl_hbr_num); - break; - case 5400: - qcom_qmp_phy_usb_configure(serdes, cfg->regs, - cfg->serdes_tbl_hbr2, - cfg->serdes_tbl_hbr2_num); - break; - case 8100: - qcom_qmp_phy_usb_configure(serdes, cfg->regs, - cfg->serdes_tbl_hbr3, - cfg->serdes_tbl_hbr3_num); - break; - default: - /* Other link rates aren't supported */ - return -EINVAL; - } - } - - if (cfg->has_phy_com_ctrl) { void __iomem *status; unsigned int mask, val; @@ -2121,32 +2091,6 @@ static int qcom_qmp_phy_usb_serdes_init(struct qmp_phy *qphy) return 0; } -static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts) -{ - const struct phy_configure_opts_dp *dp_opts = &opts->dp; - struct qmp_phy *qphy = phy_get_drvdata(phy); - const struct qmp_phy_cfg *cfg = qphy->cfg; - - memcpy(&qphy->dp_opts, dp_opts, sizeof(*dp_opts)); - if (qphy->dp_opts.set_voltages) { - cfg->configure_dp_tx(qphy); - qphy->dp_opts.set_voltages = 0; - } - - return 0; -} - -static int qcom_qmp_dp_phy_calibrate(struct phy *phy) -{ - struct qmp_phy *qphy = phy_get_drvdata(phy); - const struct qmp_phy_cfg *cfg = qphy->cfg; - - if (cfg->calibrate_dp_phy) - return cfg->calibrate_dp_phy(qphy); - - return 0; -} - static int qcom_qmp_phy_usb_com_init(struct qmp_phy *qphy) { struct qcom_qmp *qmp = qphy->qmp; @@ -2316,9 +2260,6 @@ static int qcom_qmp_phy_usb_init(struct phy *phy) if (ret) return ret; - if (cfg->type == PHY_TYPE_DP) - cfg->dp_aux_init(qphy); - return 0; } @@ -2369,10 +2310,6 @@ static int qcom_qmp_phy_usb_power_on(struct phy *phy) cfg->tx_tbl_num_sec, 2); } - /* Configure special DP tx tunings */ - if (cfg->type == PHY_TYPE_DP) - cfg->configure_dp_tx(qphy); - qcom_qmp_phy_usb_configure_lane(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num, 1); if (cfg->rx_tbl_sec) @@ -2389,14 +2326,10 @@ static int qcom_qmp_phy_usb_power_on(struct phy *phy) } /* Configure link rate, swing, etc. */ - if (cfg->type == PHY_TYPE_DP) { - cfg->configure_dp_phy(qphy); - } else { - qcom_qmp_phy_usb_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num); - if (cfg->pcs_tbl_sec) - qcom_qmp_phy_usb_configure(pcs, cfg->regs, cfg->pcs_tbl_sec, - cfg->pcs_tbl_num_sec); - } + qcom_qmp_phy_usb_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num); + if (cfg->pcs_tbl_sec) + qcom_qmp_phy_usb_configure(pcs, cfg->regs, cfg->pcs_tbl_sec, + cfg->pcs_tbl_num_sec); ret = reset_control_deassert(qmp->ufs_reset); if (ret) @@ -2408,40 +2341,26 @@ static int qcom_qmp_phy_usb_power_on(struct phy *phy) qcom_qmp_phy_usb_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl_sec, cfg->pcs_misc_tbl_num_sec); - /* - * Pull out PHY from POWER DOWN state. - * This is active low enable signal to power-down PHY. - */ - if(cfg->type == PHY_TYPE_PCIE) - qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl); - if (cfg->has_pwrdn_delay) usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max); - if (cfg->type != PHY_TYPE_DP) { - /* Pull PHY out of reset state */ - if (!cfg->no_pcs_sw_reset) - qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); - /* start SerDes and Phy-Coding-Sublayer */ - qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); - - if (cfg->type == PHY_TYPE_UFS) { - status = pcs + cfg->regs[QPHY_PCS_READY_STATUS]; - mask = PCS_READY; - ready = PCS_READY; - } else { - status = pcs + cfg->regs[QPHY_PCS_STATUS]; - mask = cfg->phy_status; - ready = 0; - } + /* Pull PHY out of reset state */ + if (!cfg->no_pcs_sw_reset) + qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); + /* start SerDes and Phy-Coding-Sublayer */ + qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); - ret = readl_poll_timeout(status, val, (val & mask) == ready, 10, - PHY_INIT_COMPLETE_TIMEOUT); - if (ret) { - dev_err(qmp->dev, "phy initialization timed-out\n"); - goto err_disable_pipe_clk; - } + status = pcs + cfg->regs[QPHY_PCS_STATUS]; + mask = cfg->phy_status; + ready = 0; + + ret = readl_poll_timeout(status, val, (val & mask) == ready, 10, + PHY_INIT_COMPLETE_TIMEOUT); + if (ret) { + dev_err(qmp->dev, "phy initialization timed-out\n"); + goto err_disable_pipe_clk; } + return 0; err_disable_pipe_clk: @@ -2460,25 +2379,20 @@ static int qcom_qmp_phy_usb_power_off(struct phy *phy) clk_disable_unprepare(qphy->pipe_clk); - if (cfg->type == PHY_TYPE_DP) { - /* Assert DP PHY power down */ - writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL); - } else { - /* PHY reset */ - if (!cfg->no_pcs_sw_reset) - qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); + /* PHY reset */ + if (!cfg->no_pcs_sw_reset) + qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); - /* stop SerDes and Phy-Coding-Sublayer */ - qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); + /* stop SerDes and Phy-Coding-Sublayer */ + qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); - /* Put PHY into POWER DOWN state: active low */ - if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) { - qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], - cfg->pwrdn_ctrl); - } else { - qphy_clrbits(qphy->pcs, QPHY_POWER_DOWN_CONTROL, - cfg->pwrdn_ctrl); - } + /* Put PHY into POWER DOWN state: active low */ + if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) { + qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], + cfg->pwrdn_ctrl); + } else { + qphy_clrbits(qphy->pcs, QPHY_POWER_DOWN_CONTROL, + cfg->pwrdn_ctrl); } return 0; @@ -2755,223 +2669,13 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np) return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np); } -/* - * Display Port PLL driver block diagram for branch clocks - * - * +------------------------------+ - * | DP_VCO_CLK | - * | | - * | +-------------------+ | - * | | (DP PLL/VCO) | | - * | +---------+---------+ | - * | v | - * | +----------+-----------+ | - * | | hsclk_divsel_clk_src | | - * | +----------+-----------+ | - * +------------------------------+ - * | - * +---------<---------v------------>----------+ - * | | - * +--------v----------------+ | - * | dp_phy_pll_link_clk | | - * | link_clk | | - * +--------+----------------+ | - * | | - * | | - * v v - * Input to DISPCC block | - * for link clk, crypto clk | - * and interface clock | - * | - * | - * +--------<------------+-----------------+---<---+ - * | | | - * +----v---------+ +--------v-----+ +--------v------+ - * | vco_divided | | vco_divided | | vco_divided | - * | _clk_src | | _clk_src | | _clk_src | - * | | | | | | - * |divsel_six | | divsel_two | | divsel_four | - * +-------+------+ +-----+--------+ +--------+------+ - * | | | - * v---->----------v-------------<------v - * | - * +----------+-----------------+ - * | dp_phy_pll_vco_div_clk | - * +---------+------------------+ - * | - * v - * Input to DISPCC block - * for DP pixel clock - * - */ -static int qcom_qmp_dp_pixel_clk_determine_rate(struct clk_hw *hw, - struct clk_rate_request *req) -{ - switch (req->rate) { - case 1620000000UL / 2: - case 2700000000UL / 2: - /* 5.4 and 8.1 GHz are same link rate as 2.7GHz, i.e. div 4 and div 6 */ - return 0; - default: - return -EINVAL; - } -} - -static unsigned long -qcom_qmp_dp_pixel_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) -{ - const struct qmp_phy_dp_clks *dp_clks; - const struct qmp_phy *qphy; - const struct phy_configure_opts_dp *dp_opts; - - dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_pixel_hw); - qphy = dp_clks->qphy; - dp_opts = &qphy->dp_opts; - - switch (dp_opts->link_rate) { - case 1620: - return 1620000000UL / 2; - case 2700: - return 2700000000UL / 2; - case 5400: - return 5400000000UL / 4; - case 8100: - return 8100000000UL / 6; - default: - return 0; - } -} - -static const struct clk_ops qcom_qmp_dp_pixel_clk_ops = { - .determine_rate = qcom_qmp_dp_pixel_clk_determine_rate, - .recalc_rate = qcom_qmp_dp_pixel_clk_recalc_rate, -}; - -static int qcom_qmp_dp_link_clk_determine_rate(struct clk_hw *hw, - struct clk_rate_request *req) -{ - switch (req->rate) { - case 162000000: - case 270000000: - case 540000000: - case 810000000: - return 0; - default: - return -EINVAL; - } -} - -static unsigned long -qcom_qmp_dp_link_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) -{ - const struct qmp_phy_dp_clks *dp_clks; - const struct qmp_phy *qphy; - const struct phy_configure_opts_dp *dp_opts; - - dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_link_hw); - qphy = dp_clks->qphy; - dp_opts = &qphy->dp_opts; - - switch (dp_opts->link_rate) { - case 1620: - case 2700: - case 5400: - case 8100: - return dp_opts->link_rate * 100000; - default: - return 0; - } -} - -static const struct clk_ops qcom_qmp_dp_link_clk_ops = { - .determine_rate = qcom_qmp_dp_link_clk_determine_rate, - .recalc_rate = qcom_qmp_dp_link_clk_recalc_rate, -}; - -static struct clk_hw * -qcom_qmp_dp_clks_hw_get(struct of_phandle_args *clkspec, void *data) -{ - struct qmp_phy_dp_clks *dp_clks = data; - unsigned int idx = clkspec->args[0]; - - if (idx >= 2) { - pr_err("%s: invalid index %u\n", __func__, idx); - return ERR_PTR(-EINVAL); - } - - if (idx == 0) - return &dp_clks->dp_link_hw; - - return &dp_clks->dp_pixel_hw; -} - -static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy, - struct device_node *np) -{ - struct clk_init_data init = { }; - struct qmp_phy_dp_clks *dp_clks; - char name[64]; - int ret; - - dp_clks = devm_kzalloc(qmp->dev, sizeof(*dp_clks), GFP_KERNEL); - if (!dp_clks) - return -ENOMEM; - - dp_clks->qphy = qphy; - qphy->dp_clks = dp_clks; - - snprintf(name, sizeof(name), "%s::link_clk", dev_name(qmp->dev)); - init.ops = &qcom_qmp_dp_link_clk_ops; - init.name = name; - dp_clks->dp_link_hw.init = &init; - ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_link_hw); - if (ret) - return ret; - - snprintf(name, sizeof(name), "%s::vco_div_clk", dev_name(qmp->dev)); - init.ops = &qcom_qmp_dp_pixel_clk_ops; - init.name = name; - dp_clks->dp_pixel_hw.init = &init; - ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_pixel_hw); - if (ret) - return ret; - - ret = of_clk_add_hw_provider(np, qcom_qmp_dp_clks_hw_get, dp_clks); - if (ret) - return ret; - - /* - * Roll a devm action because the clock provider is the child node, but - * the child node is not actually a device. - */ - return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np); -} - -static const struct phy_ops qcom_qmp_phy_usb_gen_ops = { +static const struct phy_ops qcom_qmp_phy_usb_ops = { .init = qcom_qmp_phy_usb_enable, .exit = qcom_qmp_phy_usb_disable, .set_mode = qcom_qmp_phy_usb_set_mode, .owner = THIS_MODULE, }; -static const struct phy_ops qcom_qmp_phy_usb_dp_ops = { - .init = qcom_qmp_phy_usb_init, - .configure = qcom_qmp_dp_phy_configure, - .power_on = qcom_qmp_phy_usb_power_on, - .calibrate = qcom_qmp_dp_phy_calibrate, - .power_off = qcom_qmp_phy_usb_power_off, - .exit = qcom_qmp_phy_usb_exit, - .set_mode = qcom_qmp_phy_usb_set_mode, - .owner = THIS_MODULE, -}; - -static const struct phy_ops qcom_qmp_pcie_ufs_ops = { - .power_on = qcom_qmp_phy_usb_enable, - .power_off = qcom_qmp_phy_usb_disable, - .set_mode = qcom_qmp_phy_usb_set_mode, - .owner = THIS_MODULE, -}; - static void qcom_qmp_reset_control_put(void *data) { reset_control_put(data); @@ -2984,7 +2688,6 @@ int qcom_qmp_phy_usb_create(struct device *dev, struct device_node *np, int id, struct qcom_qmp *qmp = dev_get_drvdata(dev); struct phy *generic_phy; struct qmp_phy *qphy; - const struct phy_ops *ops; char prop_name[MAX_PROP_NAME]; int ret; @@ -3051,16 +2754,12 @@ int qcom_qmp_phy_usb_create(struct device *dev, struct device_node *np, int id, snprintf(prop_name, sizeof(prop_name), "pipe%d", id); qphy->pipe_clk = devm_get_clk_from_child(dev, np, prop_name); if (IS_ERR(qphy->pipe_clk)) { - if (cfg->type == PHY_TYPE_PCIE || - cfg->type == PHY_TYPE_USB3) { - ret = PTR_ERR(qphy->pipe_clk); - if (ret != -EPROBE_DEFER) - dev_err(dev, - "failed to get lane%d pipe_clk, %d\n", - id, ret); - return ret; - } - qphy->pipe_clk = NULL; + ret = PTR_ERR(qphy->pipe_clk); + if (ret != -EPROBE_DEFER) + dev_err(dev, + "failed to get lane%d pipe_clk, %d\n", + id, ret); + return ret; } /* Get lane reset, if any */ @@ -3077,14 +2776,7 @@ int qcom_qmp_phy_usb_create(struct device *dev, struct device_node *np, int id, return ret; } - if (cfg->type == PHY_TYPE_UFS || cfg->type == PHY_TYPE_PCIE) - ops = &qcom_qmp_pcie_ufs_ops; - else if (cfg->type == PHY_TYPE_DP) - ops = &qcom_qmp_phy_usb_dp_ops; - else - ops = &qcom_qmp_phy_usb_gen_ops; - - generic_phy = devm_phy_create(dev, np, ops); + generic_phy = devm_phy_create(dev, np, &qcom_qmp_phy_usb_ops); if (IS_ERR(generic_phy)) { ret = PTR_ERR(generic_phy); dev_err(dev, "failed to create qphy %d\n", ret); @@ -3172,12 +2864,7 @@ static int qcom_qmp_phy_usb_probe(struct platform_device *pdev) struct device_node *child; struct phy_provider *phy_provider; void __iomem *serdes; - void __iomem *usb_serdes; - void __iomem *dp_serdes = NULL; - const struct qmp_phy_combo_cfg *combo_cfg = NULL; const struct qmp_phy_cfg *cfg = NULL; - const struct qmp_phy_cfg *usb_cfg = NULL; - const struct qmp_phy_cfg *dp_cfg = NULL; int num, id, expected_phys; int ret; @@ -3194,28 +2881,18 @@ static int qcom_qmp_phy_usb_probe(struct platform_device *pdev) return -EINVAL; /* per PHY serdes; usually located at base address */ - usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0); + serdes = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(serdes)) return PTR_ERR(serdes); /* per PHY dp_com; if PHY has dp_com control block */ - if (combo_cfg || cfg->has_phy_dp_com_ctrl) { + if (cfg->has_phy_dp_com_ctrl) { qmp->dp_com = devm_platform_ioremap_resource(pdev, 1); if (IS_ERR(qmp->dp_com)) return PTR_ERR(qmp->dp_com); } - if (combo_cfg) { - /* Only two serdes for combo PHY */ - dp_serdes = devm_platform_ioremap_resource(pdev, 2); - if (IS_ERR(dp_serdes)) - return PTR_ERR(dp_serdes); - - dp_cfg = combo_cfg->dp_cfg; - expected_phys = 2; - } else { - expected_phys = cfg->nlanes; - } + expected_phys = cfg->nlanes; mutex_init(&qmp->phy_mutex); @@ -3254,14 +2931,6 @@ static int qcom_qmp_phy_usb_probe(struct platform_device *pdev) id = 0; for_each_available_child_of_node(dev->of_node, child) { - if (of_node_name_eq(child, "dp-phy")) { - cfg = dp_cfg; - serdes = dp_serdes; - } else if (of_node_name_eq(child, "usb3-phy")) { - cfg = usb_cfg; - serdes = usb_serdes; - } - /* Create per-lane phy */ ret = qcom_qmp_phy_usb_create(dev, child, id, serdes, cfg); if (ret) { @@ -3274,21 +2943,13 @@ static int qcom_qmp_phy_usb_probe(struct platform_device *pdev) * Register the pipe clock provided by phy. * See function description to see details of this pipe clock. */ - if (cfg->type == PHY_TYPE_USB3 || cfg->type == PHY_TYPE_PCIE) { - ret = phy_pipe_clk_register(qmp, child); - if (ret) { - dev_err(qmp->dev, - "failed to register pipe clock source\n"); - goto err_node_put; - } - } else if (cfg->type == PHY_TYPE_DP) { - ret = phy_dp_clks_register(qmp, qmp->phys[id], child); - if (ret) { - dev_err(qmp->dev, - "failed to register DP clock source\n"); - goto err_node_put; - } + ret = phy_pipe_clk_register(qmp, child); + if (ret) { + dev_err(qmp->dev, + "failed to register pipe clock source\n"); + goto err_node_put; } + id++; } -- 2.7.4