From 86aa7103b61edf02baad492fa601cd6a3db0e77e Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 9 Jun 2019 18:46:44 +0200 Subject: [PATCH] ARM: imx: m53menlo: Convert MMC, USB and block to DM Enable DM block and DM MMC and DM USB support on iMX53 M53Menlo . Convert board code to match the DM support. This also enables DM pincontrol to configure the SDHI pins. Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: Stefano Babic --- board/menlo/m53menlo/m53menlo.c | 66 ----------------------------------------- configs/m53menlo_defconfig | 9 ++++++ 2 files changed, 9 insertions(+), 66 deletions(-) diff --git a/board/menlo/m53menlo/m53menlo.c b/board/menlo/m53menlo/m53menlo.c index a460418..340c750 100644 --- a/board/menlo/m53menlo/m53menlo.c +++ b/board/menlo/m53menlo/m53menlo.c @@ -80,35 +80,6 @@ static void setup_iomux_uart(void) imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); } -#ifdef CONFIG_USB_EHCI_MX5 -int board_ehci_hcd_init(int port) -{ - if (port == 0) { - /* USB OTG PWRON */ - imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_4__GPIO1_4, - PAD_CTL_PKE | - PAD_CTL_DSE_HIGH)); - gpio_request(IMX_GPIO_NR(1, 4), "USB_OTG_PWRON"); - gpio_direction_output(IMX_GPIO_NR(1, 4), 0); - - /* USB OTG Over Current */ - imx_iomux_v3_setup_pad(MX53_PAD_GPIO_18__GPIO7_13); - } else if (port == 1) { - /* USB Host PWRON */ - imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_2__GPIO1_2, - PAD_CTL_PKE | - PAD_CTL_DSE_HIGH)); - gpio_request(IMX_GPIO_NR(1, 2), "USB_HOST_PWRON"); - gpio_direction_output(IMX_GPIO_NR(1, 2), 0); - - /* USB Host Over Current */ - imx_iomux_v3_setup_pad(MX53_PAD_GPIO_3__USBOH3_USBH1_OC); - } - - return 0; -} -#endif - static void setup_iomux_fec(void) { static const iomux_v3_cfg_t fec_pads[] = { @@ -152,43 +123,6 @@ static void setup_iomux_fec(void) imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); } -#ifdef CONFIG_FSL_ESDHC -struct fsl_esdhc_cfg esdhc_cfg = { - MMC_SDHC1_BASE_ADDR, -}; - -int board_mmc_getcd(struct mmc *mmc) -{ - imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1); - gpio_direction_input(IMX_GPIO_NR(1, 1)); - - return !gpio_get_value(IMX_GPIO_NR(1, 1)); -} - -#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ - PAD_CTL_PUS_100K_UP) -#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \ - PAD_CTL_DSE_HIGH) - -int board_mmc_init(bd_t *bis) -{ - static const iomux_v3_cfg_t sd1_pads[] = { - NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL), - }; - - esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); - - imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads)); - - return fsl_esdhc_initialize(bis, &esdhc_cfg); -} -#endif - #ifdef CONFIG_VIDEO static void enable_lvds_clock(struct display_info_t const *dev, const u8 hclk) { diff --git a/configs/m53menlo_defconfig b/configs/m53menlo_defconfig index 3b527b9..c9a8b0d 100644 --- a/configs/m53menlo_defconfig +++ b/configs/m53menlo_defconfig @@ -28,12 +28,14 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND_TRIMFFS=y +# CONFIG_CMD_PINMUX is not set CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -58,14 +60,21 @@ CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SYS_BOOTCOUNT_MAGIC=0x0B01C041 CONFIG_DM_GPIO=y +CONFIG_DM_MMC=y CONFIG_FSL_ESDHC=y CONFIG_NAND=y CONFIG_NAND_MXC=y CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ8XXX=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX5=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y CONFIG_RTC_M41T62=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_EHCI_MX5=y CONFIG_USB_STORAGE=y CONFIG_USB_HOST_ETHER=y -- 2.7.4