From 85e0a0f8bfa42dc05b7d89798df6fbc2c13147a6 Mon Sep 17 00:00:00 2001 From: "Lin, Meng-Bo" Date: Wed, 23 Nov 2022 03:39:19 +0000 Subject: [PATCH] arm64: dts: qcom: msm8916-acer-a1-724: Add accelerometer/magnetometer Iconia Talk S uses a Bosch BMC150 accelerometer/magnetometer combo. The chip provides two separate I2C devices for the accelerometer and magnetometer that are already supported by the bmc150-accel and bmc150-magn driver. Signed-off-by: Lin, Meng-Bo Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20221123033830.149061-1-linmengbo0689@protonmail.com --- arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts | 38 ++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts index 593051e..bea0d02 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts @@ -6,6 +6,7 @@ #include #include +#include /* * NOTE: The original firmware from Acer can only boot 32-bit kernels. @@ -51,6 +52,35 @@ }; }; +&blsp_i2c2 { + status = "okay"; + + accelerometer@10 { + compatible = "bosch,bmc150_accel"; + reg = <0x10>; + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default>; + + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; + + magnetometer@12 { + compatible = "bosch,bmc150_magn"; + reg = <0x12>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + }; +}; + &blsp1_uart2 { status = "okay"; }; @@ -199,6 +229,14 @@ }; &msmgpio { + accel_int_default: accel-int-default-state { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + gpio_keys_default: gpio-keys-default-state { pins = "gpio107"; function = "gpio"; -- 2.7.4