From 85b22eb632dc75887ba99edad49307a02c2ae7ec Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Thu, 2 Mar 2006 18:20:29 -0800 Subject: [PATCH] e1000: Add enabled Jumbo frame support for 82573L Signed-off-by: Jeff Kirsher Signed-off-by: Jesse Brandeburg Signed-off-by: John Ronciak --- drivers/net/e1000/e1000_hw.h | 5 +++++ drivers/net/e1000/e1000_main.c | 16 +++++++++++++++- 2 files changed, 20 insertions(+), 1 deletion(-) diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index 0848e55..f565b201 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -1875,6 +1875,7 @@ struct e1000_hw { #define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */ #define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */ #define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */ +#define E1000_MANC_RCV_ALL 0x00080000 /* Receive All Enabled */ #define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */ #define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address * filtering */ @@ -2036,6 +2037,7 @@ struct e1000_host_command_info { #define EEPROM_INIT_CONTROL1_REG 0x000A #define EEPROM_INIT_CONTROL2_REG 0x000F #define EEPROM_INIT_CONTROL3_PORT_B 0x0014 +#define EEPROM_INIT_3GIO_3 0x001A #define EEPROM_INIT_CONTROL3_PORT_A 0x0024 #define EEPROM_CFG 0x0012 #define EEPROM_FLASH_VERSION 0x0032 @@ -2085,6 +2087,9 @@ struct e1000_host_command_info { #define EEPROM_WORD0F_ANE 0x0800 #define EEPROM_WORD0F_SWPDIO_EXT 0x00F0 +/* Mask bits for fields in Word 0x1a of the EEPROM */ +#define EEPROM_WORD1A_ASPM_MASK 0x000C + /* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */ #define EEPROM_SUM 0xBABA diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 6603bd1..58561a4 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -2978,6 +2978,7 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu) { struct e1000_adapter *adapter = netdev_priv(netdev); int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE; + uint16_t eeprom_data = 0; if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) || (max_frame > MAX_JUMBO_FRAME_SIZE)) { @@ -2989,12 +2990,25 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu) switch (adapter->hw.mac_type) { case e1000_82542_rev2_0: case e1000_82542_rev2_1: - case e1000_82573: if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) { DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n"); return -EINVAL; } break; + case e1000_82573: + /* only enable jumbo frames if ASPM is disabled completely + * this means both bits must be zero in 0x1A bits 3:2 */ + e1000_read_eeprom(&adapter->hw, EEPROM_INIT_3GIO_3, 1, + &eeprom_data); + if (eeprom_data & EEPROM_WORD1A_ASPM_MASK) { + if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) { + DPRINTK(PROBE, ERR, + "Jumbo Frames not supported.\n"); + return -EINVAL; + } + break; + } + /* fall through to get support */ case e1000_82571: case e1000_82572: #define MAX_STD_JUMBO_FRAME_SIZE 9234 -- 2.7.4