From 819779a986f0136df1c814f10b99ff76ccd752f2 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Sun, 8 Mar 2020 14:58:41 +0800 Subject: [PATCH] arm64: dts: imx8mn: Add CPU thermal zone support i.MX8MN shares same thermal sensor with i.MX8MM, add thermal zone support for i.MX8MN. Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mn.dtsi | 44 +++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index ff9c1ea..e3f6b28 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -7,6 +7,7 @@ #include #include #include +#include #include "imx8mn-pinfunc.h" @@ -67,6 +68,7 @@ nvmem-cells = <&cpu_speed_grade>; nvmem-cell-names = "speed_grade"; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_1: cpu@1 { @@ -79,6 +81,7 @@ next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_2: cpu@2 { @@ -91,6 +94,7 @@ next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_3: cpu@3 { @@ -103,6 +107,7 @@ next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; cpu-idle-states = <&cpu_pd_wait>; + #cooling-cells = <2>; }; A53_L2: l2-cache0 { @@ -186,6 +191,38 @@ method = "smc"; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tmu>; + trips { + cpu_alert0: trip0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit0: trip1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = , @@ -274,6 +311,13 @@ gpio-ranges = <&iomuxc 0 119 30>; }; + tmu: tmu@30260000 { + compatible = "fsl,imx8mn-tmu", "fsl,imx8mm-tmu"; + reg = <0x30260000 0x10000>; + clocks = <&clk IMX8MN_CLK_TMU_ROOT>; + #thermal-sensor-cells = <0>; + }; + wdog1: watchdog@30280000 { compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt"; reg = <0x30280000 0x10000>; -- 2.7.4