From 8058182fa4402361f25cd701bb90276fba331127 Mon Sep 17 00:00:00 2001 From: Nava kishore Manne Date: Thu, 11 Feb 2021 10:41:47 +0530 Subject: [PATCH] dt-bindings: fpga: Add compatible value for Xilinx DFX AXI shutdown manager This patch Adds compatible value for Xilinx Dynamic Function eXchnage(DFX) AXI Shutdown manager IP. Signed-off-by: Nava kishore Manne Reviewed-by: Tom Rix Reviewed-by: Rob Herring Signed-off-by: Moritz Fischer Signed-off-by: Greg Kroah-Hartman --- .../bindings/fpga/xilinx-pr-decoupler.txt | 24 +++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt index 4284d29..0acdfa6 100644 --- a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt +++ b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt @@ -7,13 +7,24 @@ changes from passing through the bridge. The controller can also couple / enable the bridges which allows traffic to pass through the bridge normally. +Xilinx LogiCORE Dynamic Function eXchange(DFX) AXI shutdown manager +Softcore is compatible with the Xilinx LogiCORE pr-decoupler. + +The Dynamic Function eXchange AXI shutdown manager prevents AXI traffic +from passing through the bridge. The controller safely handles AXI4MM +and AXI4-Lite interfaces on a Reconfigurable Partition when it is +undergoing dynamic reconfiguration, preventing the system deadlock +that can occur if AXI transactions are interrupted by DFX + The Driver supports only MMIO handling. A PR region can have multiple PR Decouplers which can be handled independently or chained via decouple/ decouple_status signals. Required properties: - compatible : Should contain "xlnx,pr-decoupler-1.00" followed by - "xlnx,pr-decoupler" + "xlnx,pr-decoupler" or + "xlnx,dfx-axi-shutdown-manager-1.00" followed by + "xlnx,dfx-axi-shutdown-manager" - regs : base address and size for decoupler module - clocks : input clock to IP - clock-names : should contain "aclk" @@ -22,6 +33,7 @@ See Documentation/devicetree/bindings/fpga/fpga-region.txt and Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings. Example: +Partial Reconfig Decoupler: fpga-bridge@100000450 { compatible = "xlnx,pr-decoupler-1.00", "xlnx-pr-decoupler"; @@ -30,3 +42,13 @@ Example: clock-names = "aclk"; bridge-enable = <0>; }; + +Dynamic Function eXchange AXI shutdown manager: + fpga-bridge@100000450 { + compatible = "xlnx,dfx-axi-shutdown-manager-1.00", + "xlnx,dfx-axi-shutdown-manager"; + regs = <0x10000045 0x10>; + clocks = <&clkc 15>; + clock-names = "aclk"; + bridge-enable = <0>; + }; -- 2.7.4