From 8032affdf5a156a467d3b109f32cd9f57ea7afda Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Wed, 21 Jul 2021 17:06:24 +0530 Subject: [PATCH] arm64: dts: ti: k3-am642-evm: Add pwm nodes ecap0 can be configured to use pad ECAP0_IN_APWM_OUT (D18) which has a signal connected to Pin 1 of J12 on EVM. Add support for adding this pinmux so that pwm can be observed on pin 1 of Header J12 Also mark all un-used epwm and ecap pwm nodes as disabled. Signed-off-by: Lokesh Vutla Signed-off-by: Nishanth Menon Reviewed-by: Grygorii Strashko Link: https://lore.kernel.org/r/20210721113625.17299-4-lokeshvutla@ti.com --- arch/arm64/boot/dts/ti/k3-am642-evm.dts | 56 +++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts index 0307122..24ce494 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts @@ -288,6 +288,12 @@ AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */ >; }; + + main_ecap0_pins_default: main-ecap0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */ + >; + }; }; &main_uart0 { @@ -574,3 +580,53 @@ num-lanes = <1>; status = "disabled"; }; + +&ecap0 { + /* PWM is available on Pin 1 of header J12 */ + pinctrl-names = "default"; + pinctrl-0 = <&main_ecap0_pins_default>; +}; + +&ecap1 { + status = "disabled"; +}; + +&ecap2 { + status = "disabled"; +}; + +&epwm0 { + status = "disabled"; +}; + +&epwm1 { + status = "disabled"; +}; + +&epwm2 { + status = "disabled"; +}; + +&epwm3 { + status = "disabled"; +}; + +&epwm4 { + status = "disabled"; +}; + +&epwm5 { + status = "disabled"; +}; + +&epwm6 { + status = "disabled"; +}; + +&epwm7 { + status = "disabled"; +}; + +&epwm8 { + status = "disabled"; +}; -- 2.7.4