From 80130204b43ce9c3b50924e4c2d44e9f2881f8c3 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Sun, 8 May 2011 10:42:17 +0200 Subject: [PATCH] MIPS: Alchemy: Rewrite UART setup and constants. Detect CPU type at runtime and setup uarts accordingly; also clean up the uart base address mess in the process as far as possible. Signed-off-by: Manuel Lauss To: Linux-MIPS Cc: Florian Fainelli Cc: Wolfgang Grandegger Patchwork: https://patchwork.linux-mips.org/patch/2352/ Signed-off-by: Ralf Baechle membase + UART_MOD_CNTRL) & 3) != 3) { - /* power-on sequence as suggested in the databooks */ - __raw_writel(0, port->membase + UART_MOD_CNTRL); - wmb(); - __raw_writel(1, port->membase + UART_MOD_CNTRL); - wmb(); - } - __raw_writel(3, port->membase + UART_MOD_CNTRL); /* full on */ - wmb(); + alchemy_uart_enable(CPHYSADDR(port->membase)); serial8250_do_pm(port, state, old_state); break; case 3: /* power off */ serial8250_do_pm(port, state, old_state); - __raw_writel(0, port->membase + UART_MOD_CNTRL); - wmb(); + alchemy_uart_disable(CPHYSADDR(port->membase)); break; default: serial8250_do_pm(port, state, old_state); @@ -65,38 +56,60 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state, .pm = alchemy_8250_pm, \ } -static struct plat_serial8250_port au1x00_uart_data[] = { -#if defined(CONFIG_SOC_AU1000) - PORT(UART0_PHYS_ADDR, AU1000_UART0_INT), - PORT(UART1_PHYS_ADDR, AU1000_UART1_INT), - PORT(UART2_PHYS_ADDR, AU1000_UART2_INT), - PORT(UART3_PHYS_ADDR, AU1000_UART3_INT), -#elif defined(CONFIG_SOC_AU1500) - PORT(UART0_PHYS_ADDR, AU1500_UART0_INT), - PORT(UART3_PHYS_ADDR, AU1500_UART3_INT), -#elif defined(CONFIG_SOC_AU1100) - PORT(UART0_PHYS_ADDR, AU1100_UART0_INT), - PORT(UART1_PHYS_ADDR, AU1100_UART1_INT), - PORT(UART3_PHYS_ADDR, AU1100_UART3_INT), -#elif defined(CONFIG_SOC_AU1550) - PORT(UART0_PHYS_ADDR, AU1550_UART0_INT), - PORT(UART1_PHYS_ADDR, AU1550_UART1_INT), - PORT(UART3_PHYS_ADDR, AU1550_UART3_INT), -#elif defined(CONFIG_SOC_AU1200) - PORT(UART0_PHYS_ADDR, AU1200_UART0_INT), - PORT(UART1_PHYS_ADDR, AU1200_UART1_INT), -#endif - { }, +static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = { + [ALCHEMY_CPU_AU1000] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1000_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1000_UART1_INT), + PORT(AU1000_UART2_PHYS_ADDR, AU1000_UART2_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1000_UART3_INT), + }, + [ALCHEMY_CPU_AU1500] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1500_UART0_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1500_UART3_INT), + }, + [ALCHEMY_CPU_AU1100] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1100_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1100_UART1_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1100_UART3_INT), + }, + [ALCHEMY_CPU_AU1550] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1550_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1550_UART1_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1550_UART3_INT), + }, + [ALCHEMY_CPU_AU1200] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT), + }, }; static struct platform_device au1xx0_uart_device = { .name = "serial8250", .id = PLAT8250_DEV_AU1X00, - .dev = { - .platform_data = au1x00_uart_data, - }, }; +static void __init alchemy_setup_uarts(int ctype) +{ + unsigned int uartclk = get_au1x00_uart_baud_base() * 16; + int s = sizeof(struct plat_serial8250_port); + int c = alchemy_get_uarts(ctype); + struct plat_serial8250_port *ports; + + ports = kzalloc(s * (c + 1), GFP_KERNEL); + if (!ports) { + printk(KERN_INFO "Alchemy: no memory for UART data\n"); + return; + } + memcpy(ports, au1x00_uart_data[ctype], s * c); + au1xx0_uart_device.dev.platform_data = ports; + + /* Fill up uartclk. */ + for (s = 0; s < c; s++) + ports[s].uartclk = uartclk; + if (platform_device_register(&au1xx0_uart_device)) + printk(KERN_INFO "Alchemy: failed to register UARTs\n"); +} + /* OHCI (USB full speed host controller) */ static struct resource au1xxx_usb_ohci_resources[] = { [0] = { @@ -442,7 +455,6 @@ void __init au1xxx_override_eth_cfg(unsigned int port, } static struct platform_device *au1xxx_platform_devices[] __initdata = { - &au1xx0_uart_device, &au1xxx_usb_ohci_device, #ifdef CONFIG_FB_AU1100 &au1100_lcd_device, @@ -465,13 +477,10 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = { static int __init au1xxx_platform_init(void) { - unsigned int uartclk = get_au1x00_uart_baud_base() * 16; - int err, i; + int err, i, ctype = alchemy_get_cputype(); unsigned char ethaddr[6]; - /* Fill up uartclk. */ - for (i = 0; au1x00_uart_data[i].flags; i++) - au1x00_uart_data[i].uartclk = uartclk; + alchemy_setup_uarts(ctype); /* use firmware-provided mac addr if available and necessary */ i = prom_get_ethernet_addr(ethaddr); diff --git a/arch/mips/alchemy/devboards/prom.c b/arch/mips/alchemy/devboards/prom.c index baeb213..e5306b5 100644 --- a/arch/mips/alchemy/devboards/prom.c +++ b/arch/mips/alchemy/devboards/prom.c @@ -62,5 +62,5 @@ void __init prom_init(void) void prom_putchar(unsigned char c) { - alchemy_uart_putchar(UART0_PHYS_ADDR, c); + alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); } diff --git a/arch/mips/alchemy/gpr/board_setup.c b/arch/mips/alchemy/gpr/board_setup.c index ad2e3f1..5f8f069 100644 --- a/arch/mips/alchemy/gpr/board_setup.c +++ b/arch/mips/alchemy/gpr/board_setup.c @@ -36,9 +36,6 @@ #include -#define UART1_ADDR KSEG1ADDR(UART1_PHYS_ADDR) -#define UART3_ADDR KSEG1ADDR(UART3_PHYS_ADDR) - char irq_tab_alchemy[][5] __initdata = { [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, }; @@ -67,18 +64,15 @@ static void gpr_power_off(void) void __init board_setup(void) { - printk(KERN_INFO "Tarpeze ITS GPR board\n"); + printk(KERN_INFO "Trapeze ITS GPR board\n"); pm_power_off = gpr_power_off; _machine_halt = gpr_power_off; _machine_restart = gpr_reset; - /* Enable UART3 */ - au_writel(0x1, UART3_ADDR + UART_MOD_CNTRL);/* clock enable (CE) */ - au_writel(0x3, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */ - /* Enable UART1 */ - au_writel(0x1, UART1_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */ - au_writel(0x3, UART1_ADDR + UART_MOD_CNTRL); /* CE and "enable" */ + /* Enable UART1/3 */ + alchemy_uart_enable(AU1000_UART3_PHYS_ADDR); + alchemy_uart_enable(AU1000_UART1_PHYS_ADDR); /* Take away Reset of UMTS-card */ alchemy_gpio_direction_output(215, 1); diff --git a/arch/mips/alchemy/gpr/init.c b/arch/mips/alchemy/gpr/init.c index f044f4c..229aafa 100644 --- a/arch/mips/alchemy/gpr/init.c +++ b/arch/mips/alchemy/gpr/init.c @@ -59,5 +59,5 @@ void __init prom_init(void) void prom_putchar(unsigned char c) { - alchemy_uart_putchar(UART0_PHYS_ADDR, c); + alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); } diff --git a/arch/mips/alchemy/mtx-1/init.c b/arch/mips/alchemy/mtx-1/init.c index f8d2557..2e81cc7 100644 --- a/arch/mips/alchemy/mtx-1/init.c +++ b/arch/mips/alchemy/mtx-1/init.c @@ -62,5 +62,5 @@ void __init prom_init(void) void prom_putchar(unsigned char c) { - alchemy_uart_putchar(UART0_PHYS_ADDR, c); + alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); } diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c index febfb0f..81e57fa 100644 --- a/arch/mips/alchemy/xxs1500/board_setup.c +++ b/arch/mips/alchemy/xxs1500/board_setup.c @@ -66,13 +66,10 @@ void __init board_setup(void) au_writel(pin_func, SYS_PINFUNC); /* Enable UART */ - au_writel(0x01, UART3_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */ - mdelay(10); - au_writel(0x03, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */ - mdelay(10); - - /* Enable DTR = USB power up */ - au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */ + alchemy_uart_enable(AU1000_UART3_PHYS_ADDR); + /* Enable DTR (MCR bit 0) = USB power up */ + __raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18)); + wmb(); #ifdef CONFIG_PCI #if defined(__MIPSEB__) diff --git a/arch/mips/alchemy/xxs1500/init.c b/arch/mips/alchemy/xxs1500/init.c index 34a90a4..0ee02cf 100644 --- a/arch/mips/alchemy/xxs1500/init.c +++ b/arch/mips/alchemy/xxs1500/init.c @@ -59,5 +59,5 @@ void __init prom_init(void) void prom_putchar(unsigned char c) { - alchemy_uart_putchar(UART0_PHYS_ADDR, c); + alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); } diff --git a/arch/mips/boot/compressed/uart-alchemy.c b/arch/mips/boot/compressed/uart-alchemy.c index 1bff22f..eb063e6 100644 --- a/arch/mips/boot/compressed/uart-alchemy.c +++ b/arch/mips/boot/compressed/uart-alchemy.c @@ -3,5 +3,5 @@ void putc(char c) { /* all current (Jan. 2010) in-kernel boards */ - alchemy_uart_putchar(UART0_PHYS_ADDR, c); + alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); } diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h index eb8f103..c4ffb20 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -161,6 +161,45 @@ static inline int alchemy_get_cputype(void) return ALCHEMY_CPU_UNKNOWN; } +/* return number of uarts on a given cputype */ +static inline int alchemy_get_uarts(int type) +{ + switch (type) { + case ALCHEMY_CPU_AU1000: + return 4; + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1200: + return 2; + case ALCHEMY_CPU_AU1100: + case ALCHEMY_CPU_AU1550: + return 3; + } + return 0; +} + +/* enable an UART block if it isn't already */ +static inline void alchemy_uart_enable(u32 uart_phys) +{ + void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys); + + /* reset, enable clock, deassert reset */ + if ((__raw_readl(addr + 0x100) & 3) != 3) { + __raw_writel(0, addr + 0x100); + wmb(); + __raw_writel(1, addr + 0x100); + wmb(); + } + __raw_writel(3, addr + 0x100); + wmb(); +} + +static inline void alchemy_uart_disable(u32 uart_phys) +{ + void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys); + __raw_writel(0, addr + 0x100); /* UART_MOD_CNTRL */ + wmb(); +} + static inline void alchemy_uart_putchar(u32 uart_phys, u8 c) { void __iomem *base = (void __iomem *)KSEG1ADDR(uart_phys); @@ -634,6 +673,10 @@ enum soc_au1200_ints { */ #define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */ +#define AU1000_UART0_PHYS_ADDR 0x11100000 /* 01234 */ +#define AU1000_UART1_PHYS_ADDR 0x11200000 /* 0234 */ +#define AU1000_UART2_PHYS_ADDR 0x11300000 /* 0 */ +#define AU1000_UART3_PHYS_ADDR 0x11400000 /* 0123 */ #define AU1000_IC1_PHYS_ADDR 0x11800000 /* 01234 */ #define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 34 */ #define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 34 */ @@ -660,10 +703,6 @@ enum soc_au1200_ints { #define MACDMA0_PHYS_ADDR 0x14004000 #define MACDMA1_PHYS_ADDR 0x14004200 #define I2S_PHYS_ADDR 0x11000000 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 -#define UART2_PHYS_ADDR 0x11300000 -#define UART3_PHYS_ADDR 0x11400000 #define SSI0_PHYS_ADDR 0x11600000 #define SSI1_PHYS_ADDR 0x11680000 #define SYS_PHYS_ADDR 0x11900000 @@ -695,8 +734,6 @@ enum soc_au1200_ints { #define MACDMA0_PHYS_ADDR 0x14004000 #define MACDMA1_PHYS_ADDR 0x14004200 #define I2S_PHYS_ADDR 0x11000000 -#define UART0_PHYS_ADDR 0x11100000 -#define UART3_PHYS_ADDR 0x11400000 #define GPIO2_PHYS_ADDR 0x11700000 #define SYS_PHYS_ADDR 0x11900000 #define PCI_MEM_PHYS_ADDR 0x400000000ULL @@ -732,9 +769,6 @@ enum soc_au1200_ints { #define MACDMA0_PHYS_ADDR 0x14004000 #define MACDMA1_PHYS_ADDR 0x14004200 #define I2S_PHYS_ADDR 0x11000000 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 -#define UART3_PHYS_ADDR 0x11400000 #define SSI0_PHYS_ADDR 0x11600000 #define SSI1_PHYS_ADDR 0x11680000 #define GPIO2_PHYS_ADDR 0x11700000 @@ -758,9 +792,6 @@ enum soc_au1200_ints { #define MACEN_PHYS_ADDR 0x10520000 #define MACDMA0_PHYS_ADDR 0x14004000 #define MACDMA1_PHYS_ADDR 0x14004200 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 -#define UART3_PHYS_ADDR 0x11400000 #define GPIO2_PHYS_ADDR 0x11700000 #define SYS_PHYS_ADDR 0x11900000 #define PE_PHYS_ADDR 0x14008000 @@ -786,8 +817,6 @@ enum soc_au1200_ints { #define CIM_PHYS_ADDR 0x14004000 #define USBM_PHYS_ADDR 0x14020000 #define USBH_PHYS_ADDR 0x14020100 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 #define GPIO2_PHYS_ADDR 0x11700000 #define SYS_PHYS_ADDR 0x11900000 #define PSC0_PHYS_ADDR 0x11A00000 -- 2.7.4