From 7e81cb3d9cf5a7cc56606a63ca6f100bb3f1f5de Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Tue, 19 Dec 2017 19:10:30 +0100 Subject: [PATCH] ARM: dts: imx7-colibri: move and rename USB Host power regulator The Colibri default which enables USB Host power is not necessarily tied to the OTG2 controller, some carrier board use the pin to control USB power for both controllers. Hence name the pinctrl group more generic. Also move the regulator to the generic eval-v3 device tree since the regulator is always on the carrier board. In the Colibri iMX7S case the regulator is just not used. This allows to reuse the regulator in a upcoming SKU Colibri iMX7D 1GB with eMMC. Signed-off-by: Stefan Agner Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 11 +++++++++++ arch/arm/boot/dts/imx7-colibri.dtsi | 2 +- arch/arm/boot/dts/imx7d-colibri-eval-v3.dts | 13 +------------ 3 files changed, 13 insertions(+), 13 deletions(-) diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi index a2e5cbd..a4027bd 100644 --- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi @@ -70,6 +70,17 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; }; &bl { diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index bb5bf94..60ea755 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -559,7 +559,7 @@ >; }; - pinctrl_usbotg2_reg: gpio-usbotg2-vbus { + pinctrl_usbh_reg: gpio-usbh-vbus { fsl,pins = < MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 /* SODIMM 129 USBH PEN */ >; diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts index a608a14..136e11a 100644 --- a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts @@ -48,20 +48,9 @@ model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3"; compatible = "toradex,colibri-imx7d-eval-v3", "toradex,colibri-imx7d", "fsl,imx7d"; - - reg_usb_otg2_vbus: regulator-usb-otg2-vbus { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg2_reg>; - regulator-name = "VCC_USB[1-4]"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; - vin-supply = <®_5v0>; - }; }; &usbotg2 { - vbus-supply = <®_usb_otg2_vbus>; + vbus-supply = <®_usbh_vbus>; status = "okay"; }; -- 2.7.4