From 7caa4fd29068cccaa7be20914af6d23f261be3eb Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Tue, 27 Aug 2013 17:29:07 +0800 Subject: [PATCH] mtd: gpmi: imx6: fix the wrong method for checking ready/busy In the imx6, all the ready/busy pins are binding togeter. So we should always check the ready/busy pin of the chip 0. In the other word, when the CS1 is enabled, we should also check the ready/busy of chip 0; if we check the ready/busy of chip 1, we will get the wrong result. Signed-off-by: Huang Shijie Signed-off-by: Brian Norris --- drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index 7d56d87..aaced29 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -1079,6 +1079,13 @@ int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip) mask = MX23_BM_GPMI_DEBUG_READY0 << chip; reg = readl(r->gpmi_regs + HW_GPMI_DEBUG); } else if (GPMI_IS_MX28(this) || GPMI_IS_MX6Q(this)) { + /* + * In the imx6, all the ready/busy pins are bound + * together. So we only need to check chip 0. + */ + if (GPMI_IS_MX6Q(this)) + chip = 0; + /* MX28 shares the same R/B register as MX6Q. */ mask = MX28_BF_GPMI_STAT_READY_BUSY(1 << chip); reg = readl(r->gpmi_regs + HW_GPMI_STAT); -- 2.7.4