From 7ba9bdcb91f694b0eaf486a825afd9c2d99532b7 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Thu, 18 Jun 2020 08:06:26 -0700 Subject: [PATCH] spi: spi-geni-qcom: Don't keep a local state variable The variable "cur_mcmd" kept track of our current state (idle, xfer, cs, cancel). We don't really need it, so get rid of it. Instead: * Use separate condition variables for "chip select done", "cancel done", and "abort done". This is important so that if a "done" comes through (perhaps some previous interrupt finally came through) it can't confuse the cancel/abort function. * Use the "done" interrupt only for when a chip select or transfer is done and we can tell the difference by looking at whether "cur_xfer" is NULL. This is mostly a no-op change. However, it is possible it could fix an issue where a super delayed interrupt for a cancel command could have confused our waiting for an abort command. Signed-off-by: Douglas Anderson Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/20200618080459.v4.5.Ib1e6855405fc9c99916ab7c7dee84d73a8bf3d68@changeid Signed-off-by: Mark Brown --- drivers/spi/spi-geni-qcom.c | 55 ++++++++++++++++++++++----------------------- 1 file changed, 27 insertions(+), 28 deletions(-) diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c index 5b8ca8b..0c534d1 100644 --- a/drivers/spi/spi-geni-qcom.c +++ b/drivers/spi/spi-geni-qcom.c @@ -63,13 +63,6 @@ #define TIMESTAMP_AFTER BIT(3) #define POST_CMD_DELAY BIT(4) -enum spi_m_cmd_opcode { - CMD_NONE, - CMD_XFER, - CMD_CS, - CMD_CANCEL, -}; - struct spi_geni_master { struct geni_se se; struct device *dev; @@ -81,10 +74,11 @@ struct spi_geni_master { unsigned int tx_rem_bytes; unsigned int rx_rem_bytes; const struct spi_transfer *cur_xfer; - struct completion xfer_done; + struct completion cs_done; + struct completion cancel_done; + struct completion abort_done; unsigned int oversampling; spinlock_t lock; - enum spi_m_cmd_opcode cur_mcmd; int irq; }; @@ -126,20 +120,23 @@ static void handle_fifo_timeout(struct spi_master *spi, struct geni_se *se = &mas->se; spin_lock_irq(&mas->lock); - reinit_completion(&mas->xfer_done); - mas->cur_mcmd = CMD_CANCEL; - geni_se_cancel_m_cmd(se); + reinit_completion(&mas->cancel_done); writel(0, se->base + SE_GENI_TX_WATERMARK_REG); + mas->cur_xfer = NULL; + mas->tx_rem_bytes = mas->rx_rem_bytes = 0; + geni_se_cancel_m_cmd(se); spin_unlock_irq(&mas->lock); - time_left = wait_for_completion_timeout(&mas->xfer_done, HZ); + + time_left = wait_for_completion_timeout(&mas->cancel_done, HZ); if (time_left) return; spin_lock_irq(&mas->lock); - reinit_completion(&mas->xfer_done); + reinit_completion(&mas->abort_done); geni_se_abort_m_cmd(se); spin_unlock_irq(&mas->lock); - time_left = wait_for_completion_timeout(&mas->xfer_done, HZ); + + time_left = wait_for_completion_timeout(&mas->abort_done, HZ); if (!time_left) dev_err(mas->dev, "Failed to cancel/abort m_cmd\n"); } @@ -156,15 +153,14 @@ static void spi_geni_set_cs(struct spi_device *slv, bool set_flag) set_flag = !set_flag; spin_lock_irq(&mas->lock); - reinit_completion(&mas->xfer_done); - mas->cur_mcmd = CMD_CS; + reinit_completion(&mas->cs_done); if (set_flag) geni_se_setup_m_cmd(se, SPI_CS_ASSERT, 0); else geni_se_setup_m_cmd(se, SPI_CS_DEASSERT, 0); spin_unlock_irq(&mas->lock); - time_left = wait_for_completion_timeout(&mas->xfer_done, HZ); + time_left = wait_for_completion_timeout(&mas->cs_done, HZ); if (!time_left) handle_fifo_timeout(spi, NULL); @@ -383,7 +379,6 @@ static void setup_fifo_xfer(struct spi_transfer *xfer, mas->rx_rem_bytes = xfer->len; } writel(spi_tx_cfg, se->base + SE_SPI_TRANS_CFG); - mas->cur_mcmd = CMD_XFER; /* * Lock around right before we start the transfer since our @@ -520,11 +515,13 @@ static irqreturn_t geni_spi_isr(int irq, void *data) geni_spi_handle_tx(mas); if (m_irq & M_CMD_DONE_EN) { - if (mas->cur_mcmd == CMD_XFER) + if (mas->cur_xfer) { spi_finalize_current_transfer(spi); - else if (mas->cur_mcmd == CMD_CS) - complete(&mas->xfer_done); - mas->cur_mcmd = CMD_NONE; + mas->cur_xfer = NULL; + } else { + complete(&mas->cs_done); + } + /* * If this happens, then a CMD_DONE came before all the Tx * buffer bytes were sent out. This is unusual, log this @@ -546,10 +543,10 @@ static irqreturn_t geni_spi_isr(int irq, void *data) mas->rx_rem_bytes, mas->cur_bits_per_word); } - if ((m_irq & M_CMD_CANCEL_EN) || (m_irq & M_CMD_ABORT_EN)) { - mas->cur_mcmd = CMD_NONE; - complete(&mas->xfer_done); - } + if (m_irq & M_CMD_CANCEL_EN) + complete(&mas->cancel_done); + if (m_irq & M_CMD_ABORT_EN) + complete(&mas->abort_done); /* * It's safe or a good idea to Ack all of our our interrupts at the @@ -617,7 +614,9 @@ static int spi_geni_probe(struct platform_device *pdev) spi->handle_err = handle_fifo_timeout; spi->set_cs = spi_geni_set_cs; - init_completion(&mas->xfer_done); + init_completion(&mas->cs_done); + init_completion(&mas->cancel_done); + init_completion(&mas->abort_done); spin_lock_init(&mas->lock); pm_runtime_enable(dev); -- 2.7.4