From 7a96b6ea90a439f73e42b640eef2386c2c644570 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Mon, 13 Jun 2022 12:46:42 +0100 Subject: [PATCH] usb: musb: Add support for PolarFire SoC's musb controller Add support for Microchips's PolarFire SoC's musb controller in host, peripheral and otg mode. Tested-by: Valentina Fernandez Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20220613114642.1615292-2-conor.dooley@microchip.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/Kconfig | 13 ++- drivers/usb/musb/Makefile | 1 + drivers/usb/musb/mpfs.c | 265 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 278 insertions(+), 1 deletion(-) create mode 100644 drivers/usb/musb/mpfs.c diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 4d61df6..f906dfd 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -123,6 +123,17 @@ config USB_MUSB_MEDIATEK select GENERIC_PHY select USB_ROLE_SWITCH +config USB_MUSB_POLARFIRE_SOC + tristate "Microchip PolarFire SoC platforms" + depends on SOC_MICROCHIP_POLARFIRE || COMPILE_TEST + depends on NOP_USB_XCEIV + select USB_MUSB_DUAL_ROLE + help + Say Y here to enable support for USB on Microchip's PolarFire SoC. + + This support is also available as a module. If so, the module + will be called mpfs. + comment "MUSB DMA mode" config MUSB_PIO_ONLY @@ -146,7 +157,7 @@ config USB_UX500_DMA config USB_INVENTRA_DMA bool 'Inventra' - depends on USB_MUSB_OMAP2PLUS || USB_MUSB_MEDIATEK || USB_MUSB_JZ4740 + depends on USB_MUSB_OMAP2PLUS || USB_MUSB_MEDIATEK || USB_MUSB_JZ4740 || USB_MUSB_POLARFIRE_SOC help Enable DMA transfers using Mentor's engine. diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile index 9322473..51dd54a 100644 --- a/drivers/usb/musb/Makefile +++ b/drivers/usb/musb/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_USB_MUSB_UX500) += ux500.o obj-$(CONFIG_USB_MUSB_JZ4740) += jz4740.o obj-$(CONFIG_USB_MUSB_SUNXI) += sunxi.o obj-$(CONFIG_USB_MUSB_MEDIATEK) += mediatek.o +obj-$(CONFIG_USB_MUSB_POLARFIRE_SOC) += mpfs.o # the kconfig must guarantee that only one of the # possible I/O schemes will be enabled at a time ... diff --git a/drivers/usb/musb/mpfs.c b/drivers/usb/musb/mpfs.c new file mode 100644 index 0000000..99666ef --- /dev/null +++ b/drivers/usb/musb/mpfs.c @@ -0,0 +1,265 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * PolarFire SoC (MPFS) MUSB Glue Layer + * + * Copyright (c) 2020-2022 Microchip Corporation. All rights reserved. + * Based on {omap2430,tusb6010,ux500}.c + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "musb_core.h" +#include "musb_dma.h" + +#define MPFS_MUSB_MAX_EP_NUM 8 +#define MPFS_MUSB_RAM_BITS 12 + +struct mpfs_glue { + struct device *dev; + struct platform_device *musb; + struct platform_device *phy; + struct clk *clk; +}; + +static struct musb_fifo_cfg mpfs_musb_mode_cfg[] = { + { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, + { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, + { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, + { .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, + { .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, }, + { .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, }, + { .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 1024, }, + { .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 4096, }, +}; + +static const struct musb_hdrc_config mpfs_musb_hdrc_config = { + .fifo_cfg = mpfs_musb_mode_cfg, + .fifo_cfg_size = ARRAY_SIZE(mpfs_musb_mode_cfg), + .multipoint = true, + .dyn_fifo = true, + .num_eps = MPFS_MUSB_MAX_EP_NUM, + .ram_bits = MPFS_MUSB_RAM_BITS, +}; + +static irqreturn_t mpfs_musb_interrupt(int irq, void *__hci) +{ + unsigned long flags; + irqreturn_t ret = IRQ_NONE; + struct musb *musb = __hci; + + spin_lock_irqsave(&musb->lock, flags); + + musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB); + musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX); + musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX); + + if (musb->int_usb || musb->int_tx || musb->int_rx) { + musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb); + musb_writew(musb->mregs, MUSB_INTRTX, musb->int_tx); + musb_writew(musb->mregs, MUSB_INTRRX, musb->int_rx); + ret = musb_interrupt(musb); + } + + spin_unlock_irqrestore(&musb->lock, flags); + + return ret; +} + +static void mpfs_musb_set_vbus(struct musb *musb, int is_on) +{ + u8 devctl; + + /* + * HDRC controls CPEN, but beware current surges during device + * connect. They can trigger transient overcurrent conditions + * that must be ignored. + */ + devctl = musb_readb(musb->mregs, MUSB_DEVCTL); + + if (is_on) { + musb->is_active = 1; + musb->xceiv->otg->default_a = 1; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; + devctl |= MUSB_DEVCTL_SESSION; + MUSB_HST_MODE(musb); + } else { + musb->is_active = 0; + + /* + * NOTE: skipping A_WAIT_VFALL -> A_IDLE and + * jumping right to B_IDLE... + */ + musb->xceiv->otg->default_a = 0; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; + devctl &= ~MUSB_DEVCTL_SESSION; + + MUSB_DEV_MODE(musb); + } + + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); + + dev_dbg(musb->controller, "VBUS %s, devctl %02x\n", + usb_otg_state_string(musb->xceiv->otg->state), + musb_readb(musb->mregs, MUSB_DEVCTL)); +} + +static int mpfs_musb_init(struct musb *musb) +{ + struct device *dev = musb->controller; + + musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + if (IS_ERR(musb->xceiv)) { + dev_err(dev, "HS UDC: no transceiver configured\n"); + return PTR_ERR(musb->xceiv); + } + + musb->dyn_fifo = true; + musb->isr = mpfs_musb_interrupt; + + musb_platform_set_vbus(musb, 1); + + return 0; +} + +static const struct musb_platform_ops mpfs_ops = { + .quirks = MUSB_DMA_INVENTRA, + .init = mpfs_musb_init, + .fifo_mode = 2, +#ifdef CONFIG_USB_INVENTRA_DMA + .dma_init = musbhs_dma_controller_create, + .dma_exit = musbhs_dma_controller_destroy, +#endif + .set_vbus = mpfs_musb_set_vbus +}; + +static int mpfs_probe(struct platform_device *pdev) +{ + struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct mpfs_glue *glue; + struct platform_device *musb_pdev; + struct device *dev = &pdev->dev; + struct clk *clk; + int ret; + + glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL); + if (!glue) + return -ENOMEM; + + musb_pdev = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); + if (!musb_pdev) { + dev_err(dev, "failed to allocate musb device\n"); + return -ENOMEM; + } + + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "failed to get clock\n"); + ret = PTR_ERR(clk); + goto err_phy_release; + } + + ret = clk_prepare_enable(clk); + if (ret) { + dev_err(&pdev->dev, "failed to enable clock\n"); + goto err_phy_release; + } + + musb_pdev->dev.parent = dev; + musb_pdev->dev.coherent_dma_mask = DMA_BIT_MASK(39); + musb_pdev->dev.dma_mask = &musb_pdev->dev.coherent_dma_mask; + device_set_of_node_from_dev(&musb_pdev->dev, dev); + + glue->dev = dev; + glue->musb = musb_pdev; + glue->clk = clk; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + goto err_clk_disable; + + pdata->config = &mpfs_musb_hdrc_config; + pdata->platform_ops = &mpfs_ops; + + pdata->mode = usb_get_dr_mode(dev); + if (pdata->mode == USB_DR_MODE_UNKNOWN) { + dev_info(dev, "No dr_mode property found, defaulting to otg\n"); + pdata->mode = USB_DR_MODE_OTG; + } + + glue->phy = usb_phy_generic_register(); + if (IS_ERR(glue->phy)) { + dev_err(dev, "failed to register usb-phy %ld\n", + PTR_ERR(glue->phy)); + goto err_clk_disable; + } + + platform_set_drvdata(pdev, glue); + + ret = platform_device_add_resources(musb_pdev, pdev->resource, pdev->num_resources); + if (ret) { + dev_err(dev, "failed to add resources\n"); + goto err_clk_disable; + } + + ret = platform_device_add_data(musb_pdev, pdata, sizeof(*pdata)); + if (ret) { + dev_err(dev, "failed to add platform_data\n"); + goto err_clk_disable; + } + + ret = platform_device_add(musb_pdev); + if (ret) { + dev_err(dev, "failed to register musb device\n"); + goto err_clk_disable; + } + + dev_info(&pdev->dev, "Registered MPFS MUSB driver\n"); + return 0; + +err_clk_disable: + clk_disable_unprepare(clk); + +err_phy_release: + usb_phy_generic_unregister(glue->phy); + platform_device_put(musb_pdev); + return ret; +} + +static int mpfs_remove(struct platform_device *pdev) +{ + struct mpfs_glue *glue = platform_get_drvdata(pdev); + + platform_device_unregister(glue->musb); + usb_phy_generic_unregister(pdev); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id mpfs_id_table[] = { + { .compatible = "microchip,mpfs-musb" }, + { } +}; +MODULE_DEVICE_TABLE(of, mpfs_id_table); +#endif + +static struct platform_driver mpfs_musb_driver = { + .probe = mpfs_probe, + .remove = mpfs_remove, + .driver = { + .name = "mpfs-musb", + .of_match_table = of_match_ptr(mpfs_id_table) + }, +}; + +module_platform_driver(mpfs_musb_driver); + +MODULE_DESCRIPTION("PolarFire SoC MUSB Glue Layer"); +MODULE_LICENSE("GPL"); -- 2.7.4