From 7a78ef92cdc5813cab2c3a8ca2334eaaedc6818c Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 9 Jun 2017 23:34:36 +0800 Subject: [PATCH] ARM: sun8i: h3: Enable EMAC with external PHY on Orange Pi Plus 2E The Orange Pi Plus 2E, unlike the Orange Pi PC and PC Plus which its schematics are based on, uses an external Realtek RTL8211E PHY in RGMII mode, with a GPIO enabling the regulator for I/O signalling power supplies. The PHY's main power supply is enabled by the main 5V power supply. Add the regulator and PHY nodes, and override the PHY phandle under the EMAC node, so that the EMAC works properly on this board. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts index 5851a47..80026f3 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts @@ -50,4 +50,30 @@ / { model = "Xunlong Orange Pi Plus 2E"; compatible = "xunlong,orangepi-plus2e", "allwinner,sun8i-h3"; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ + }; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; }; -- 2.7.4