From 78f6f406026d688868223d5dbeb197a4f7e9a9fd Mon Sep 17 00:00:00 2001 From: Robert Hancock Date: Thu, 25 Mar 2021 13:26:37 -0600 Subject: [PATCH] clk: si5341: Avoid divide errors due to bogus register contents If the Si5341 is being initially programmed and has no stored NVM configuration, some of the register contents may contain unexpected values, such as zeros, which could cause divide by zero errors during driver initialization. Trap errors caused by zero registers or zero clock rates which could result in divide errors later in the code. Fixes: 3044a860fd ("clk: Add Si5341/Si5340 driver") Signed-off-by: Robert Hancock Link: https://lore.kernel.org/r/20210325192643.2190069-4-robert.hancock@calian.com Signed-off-by: Stephen Boyd --- drivers/clk/clk-si5341.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/clk/clk-si5341.c b/drivers/clk/clk-si5341.c index b8a960e..ac1ccec 100644 --- a/drivers/clk/clk-si5341.c +++ b/drivers/clk/clk-si5341.c @@ -624,6 +624,9 @@ static unsigned long si5341_synth_clk_recalc_rate(struct clk_hw *hw, SI5341_SYNTH_N_NUM(synth->index), &n_num, &n_den); if (err < 0) return err; + /* Check for bogus/uninitialized settings */ + if (!n_num || !n_den) + return 0; /* * n_num and n_den are shifted left as much as possible, so to prevent @@ -807,6 +810,9 @@ static long si5341_output_clk_round_rate(struct clk_hw *hw, unsigned long rate, { unsigned long r; + if (!rate) + return 0; + r = *parent_rate >> 1; /* If rate is an even divisor, no changes to parent required */ @@ -835,11 +841,16 @@ static int si5341_output_clk_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { struct clk_si5341_output *output = to_clk_si5341_output(hw); - /* Frequency divider is (r_div + 1) * 2 */ - u32 r_div = (parent_rate / rate) >> 1; + u32 r_div; int err; u8 r[3]; + if (!rate) + return -EINVAL; + + /* Frequency divider is (r_div + 1) * 2 */ + r_div = (parent_rate / rate) >> 1; + if (r_div <= 1) r_div = 0; else if (r_div >= BIT(24)) -- 2.7.4