From 78f6a6bd89e9a33e4be1bc61e6990a1172aa396e Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sun, 21 Aug 2011 18:32:05 +0200 Subject: [PATCH] dl2k: use standard #defines from mii.h. Signed-off-by: Francois Romieu --- drivers/net/ethernet/dlink/dl2k.c | 105 ++++++++++++++++++------------------ drivers/net/ethernet/dlink/dl2k.h | 110 +------------------------------------- 2 files changed, 53 insertions(+), 162 deletions(-) diff --git a/drivers/net/ethernet/dlink/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c index 3fa9140..b2dc2c8 100644 --- a/drivers/net/ethernet/dlink/dl2k.c +++ b/drivers/net/ethernet/dlink/dl2k.c @@ -1428,7 +1428,7 @@ mii_wait_link (struct net_device *dev, int wait) do { bmsr = mii_read (dev, phy_addr, MII_BMSR); - if (bmsr & MII_BMSR_LINK_STATUS) + if (bmsr & BMSR_LSTATUS) return 0; mdelay (1); } while (--wait > 0); @@ -1449,60 +1449,60 @@ mii_get_media (struct net_device *dev) bmsr = mii_read (dev, phy_addr, MII_BMSR); if (np->an_enable) { - if (!(bmsr & MII_BMSR_AN_COMPLETE)) { + if (!(bmsr & BMSR_ANEGCOMPLETE)) { /* Auto-Negotiation not completed */ return -1; } - negotiate = mii_read (dev, phy_addr, MII_ANAR) & - mii_read (dev, phy_addr, MII_ANLPAR); - mscr = mii_read (dev, phy_addr, MII_MSCR); - mssr = mii_read (dev, phy_addr, MII_MSSR); - if (mscr & MII_MSCR_1000BT_FD && mssr & MII_MSSR_LP_1000BT_FD) { + negotiate = mii_read (dev, phy_addr, MII_ADVERTISE) & + mii_read (dev, phy_addr, MII_LPA); + mscr = mii_read (dev, phy_addr, MII_CTRL1000); + mssr = mii_read (dev, phy_addr, MII_STAT1000); + if (mscr & ADVERTISE_1000FULL && mssr & LPA_1000FULL) { np->speed = 1000; np->full_duplex = 1; printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n"); - } else if (mscr & MII_MSCR_1000BT_HD && mssr & MII_MSSR_LP_1000BT_HD) { + } else if (mscr & ADVERTISE_1000HALF && mssr & LPA_1000HALF) { np->speed = 1000; np->full_duplex = 0; printk (KERN_INFO "Auto 1000 Mbps, Half duplex\n"); - } else if (negotiate & MII_ANAR_100BX_FD) { + } else if (negotiate & ADVERTISE_100FULL) { np->speed = 100; np->full_duplex = 1; printk (KERN_INFO "Auto 100 Mbps, Full duplex\n"); - } else if (negotiate & MII_ANAR_100BX_HD) { + } else if (negotiate & ADVERTISE_100HALF) { np->speed = 100; np->full_duplex = 0; printk (KERN_INFO "Auto 100 Mbps, Half duplex\n"); - } else if (negotiate & MII_ANAR_10BT_FD) { + } else if (negotiate & ADVERTISE_10FULL) { np->speed = 10; np->full_duplex = 1; printk (KERN_INFO "Auto 10 Mbps, Full duplex\n"); - } else if (negotiate & MII_ANAR_10BT_HD) { + } else if (negotiate & ADVERTISE_10HALF) { np->speed = 10; np->full_duplex = 0; printk (KERN_INFO "Auto 10 Mbps, Half duplex\n"); } - if (negotiate & MII_ANAR_PAUSE) { + if (negotiate & ADVERTISE_PAUSE_CAP) { np->tx_flow &= 1; np->rx_flow &= 1; - } else if (negotiate & MII_ANAR_ASYMMETRIC) { + } else if (negotiate & ADVERTISE_PAUSE_ASYM) { np->tx_flow = 0; np->rx_flow &= 1; } /* else tx_flow, rx_flow = user select */ } else { __u16 bmcr = mii_read (dev, phy_addr, MII_BMCR); - switch (bmcr & (MII_BMCR_SPEED_100 | MII_BMCR_SPEED_1000)) { - case MII_BMCR_SPEED_1000: + switch (bmcr & (BMCR_SPEED100 | BMCR_SPEED1000)) { + case BMCR_SPEED1000: printk (KERN_INFO "Operating at 1000 Mbps, "); break; - case MII_BMCR_SPEED_100: + case BMCR_SPEED100: printk (KERN_INFO "Operating at 100 Mbps, "); break; case 0: printk (KERN_INFO "Operating at 10 Mbps, "); } - if (bmcr & MII_BMCR_DUPLEX_MODE) { + if (bmcr & BMCR_FULLDPLX) { printk (KERN_CONT "Full duplex\n"); } else { printk (KERN_CONT "Half duplex\n"); @@ -1536,24 +1536,22 @@ mii_set_media (struct net_device *dev) if (np->an_enable) { /* Advertise capabilities */ bmsr = mii_read (dev, phy_addr, MII_BMSR); - anar = mii_read (dev, phy_addr, MII_ANAR) & - ~MII_ANAR_100BX_FD & - ~MII_ANAR_100BX_HD & - ~MII_ANAR_100BT4 & - ~MII_ANAR_10BT_FD & - ~MII_ANAR_10BT_HD; - if (bmsr & MII_BMSR_100BX_FD) - anar |= MII_ANAR_100BX_FD; - if (bmsr & MII_BMSR_100BX_HD) - anar |= MII_ANAR_100BX_HD; - if (bmsr & MII_BMSR_100BT4) - anar |= MII_ANAR_100BT4; - if (bmsr & MII_BMSR_10BT_FD) - anar |= MII_ANAR_10BT_FD; - if (bmsr & MII_BMSR_10BT_HD) - anar |= MII_ANAR_10BT_HD; - anar |= MII_ANAR_PAUSE | MII_ANAR_ASYMMETRIC; - mii_write (dev, phy_addr, MII_ANAR, anar); + anar = mii_read (dev, phy_addr, MII_ADVERTISE) & + ~(ADVERTISE_100FULL | ADVERTISE_10FULL | + ADVERTISE_100HALF | ADVERTISE_10HALF | + ADVERTISE_100BASE4); + if (bmsr & BMSR_100FULL) + anar |= ADVERTISE_100FULL; + if (bmsr & BMSR_100HALF) + anar |= ADVERTISE_100HALF; + if (bmsr & BMSR_100BASE4) + anar |= ADVERTISE_100BASE4; + if (bmsr & BMSR_10FULL) + anar |= ADVERTISE_10FULL; + if (bmsr & BMSR_10HALF) + anar |= ADVERTISE_10HALF; + anar |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; + mii_write (dev, phy_addr, MII_ADVERTISE, anar); /* Enable Auto crossover */ pscr = mii_read (dev, phy_addr, MII_PHY_SCR); @@ -1561,8 +1559,8 @@ mii_set_media (struct net_device *dev) mii_write (dev, phy_addr, MII_PHY_SCR, pscr); /* Soft reset PHY */ - mii_write (dev, phy_addr, MII_BMCR, MII_BMCR_RESET); - bmcr = MII_BMCR_AN_ENABLE | MII_BMCR_RESTART_AN | MII_BMCR_RESET; + mii_write (dev, phy_addr, MII_BMCR, BMCR_RESET); + bmcr = BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET; mii_write (dev, phy_addr, MII_BMCR, bmcr); mdelay(1); } else { @@ -1574,7 +1572,7 @@ mii_set_media (struct net_device *dev) /* 2) PHY Reset */ bmcr = mii_read (dev, phy_addr, MII_BMCR); - bmcr |= MII_BMCR_RESET; + bmcr |= BMCR_RESET; mii_write (dev, phy_addr, MII_BMCR, bmcr); /* 3) Power Down */ @@ -1583,25 +1581,25 @@ mii_set_media (struct net_device *dev) mdelay (100); /* wait a certain time */ /* 4) Advertise nothing */ - mii_write (dev, phy_addr, MII_ANAR, 0); + mii_write (dev, phy_addr, MII_ADVERTISE, 0); /* 5) Set media and Power Up */ - bmcr = MII_BMCR_POWER_DOWN; + bmcr = BMCR_PDOWN; if (np->speed == 100) { - bmcr |= MII_BMCR_SPEED_100; + bmcr |= BMCR_SPEED100; printk (KERN_INFO "Manual 100 Mbps, "); } else if (np->speed == 10) { printk (KERN_INFO "Manual 10 Mbps, "); } if (np->full_duplex) { - bmcr |= MII_BMCR_DUPLEX_MODE; + bmcr |= BMCR_FULLDPLX; printk (KERN_CONT "Full duplex\n"); } else { printk (KERN_CONT "Half duplex\n"); } #if 0 /* Set 1000BaseT Master/Slave setting */ - mscr = mii_read (dev, phy_addr, MII_MSCR); + mscr = mii_read (dev, phy_addr, MII_CTRL1000); mscr |= MII_MSCR_CFG_ENABLE; mscr &= ~MII_MSCR_CFG_VALUE = 0; #endif @@ -1624,7 +1622,7 @@ mii_get_media_pcs (struct net_device *dev) bmsr = mii_read (dev, phy_addr, PCS_BMSR); if (np->an_enable) { - if (!(bmsr & MII_BMSR_AN_COMPLETE)) { + if (!(bmsr & BMSR_ANEGCOMPLETE)) { /* Auto-Negotiation not completed */ return -1; } @@ -1649,7 +1647,7 @@ mii_get_media_pcs (struct net_device *dev) } else { __u16 bmcr = mii_read (dev, phy_addr, PCS_BMCR); printk (KERN_INFO "Operating at 1000 Mbps, "); - if (bmcr & MII_BMCR_DUPLEX_MODE) { + if (bmcr & BMCR_FULLDPLX) { printk (KERN_CONT "Full duplex\n"); } else { printk (KERN_CONT "Half duplex\n"); @@ -1682,7 +1680,7 @@ mii_set_media_pcs (struct net_device *dev) if (np->an_enable) { /* Advertise capabilities */ esr = mii_read (dev, phy_addr, PCS_ESR); - anar = mii_read (dev, phy_addr, MII_ANAR) & + anar = mii_read (dev, phy_addr, MII_ADVERTISE) & ~PCS_ANAR_HALF_DUPLEX & ~PCS_ANAR_FULL_DUPLEX; if (esr & (MII_ESR_1000BT_HD | MII_ESR_1000BX_HD)) @@ -1690,22 +1688,21 @@ mii_set_media_pcs (struct net_device *dev) if (esr & (MII_ESR_1000BT_FD | MII_ESR_1000BX_FD)) anar |= PCS_ANAR_FULL_DUPLEX; anar |= PCS_ANAR_PAUSE | PCS_ANAR_ASYMMETRIC; - mii_write (dev, phy_addr, MII_ANAR, anar); + mii_write (dev, phy_addr, MII_ADVERTISE, anar); /* Soft reset PHY */ - mii_write (dev, phy_addr, MII_BMCR, MII_BMCR_RESET); - bmcr = MII_BMCR_AN_ENABLE | MII_BMCR_RESTART_AN | - MII_BMCR_RESET; + mii_write (dev, phy_addr, MII_BMCR, BMCR_RESET); + bmcr = BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET; mii_write (dev, phy_addr, MII_BMCR, bmcr); mdelay(1); } else { /* Force speed setting */ /* PHY Reset */ - bmcr = MII_BMCR_RESET; + bmcr = BMCR_RESET; mii_write (dev, phy_addr, MII_BMCR, bmcr); mdelay(10); if (np->full_duplex) { - bmcr = MII_BMCR_DUPLEX_MODE; + bmcr = BMCR_FULLDPLX; printk (KERN_INFO "Manual full duplex\n"); } else { bmcr = 0; @@ -1715,7 +1712,7 @@ mii_set_media_pcs (struct net_device *dev) mdelay(10); /* Advertise nothing */ - mii_write (dev, phy_addr, MII_ANAR, 0); + mii_write (dev, phy_addr, MII_ADVERTISE, 0); } return 0; } diff --git a/drivers/net/ethernet/dlink/dl2k.h b/drivers/net/ethernet/dlink/dl2k.h index 7caab3d..ba0adca 100644 --- a/drivers/net/ethernet/dlink/dl2k.h +++ b/drivers/net/ethernet/dlink/dl2k.h @@ -28,6 +28,7 @@ #include #include #include +#include #include #include /* Processor type for cache alignment. */ #include @@ -271,20 +272,9 @@ enum RFS_bits { #define MII_RESET_TIME_OUT 10000 /* MII register */ enum _mii_reg { - MII_BMCR = 0, - MII_BMSR = 1, - MII_PHY_ID1 = 2, - MII_PHY_ID2 = 3, - MII_ANAR = 4, - MII_ANLPAR = 5, - MII_ANER = 6, - MII_ANNPT = 7, - MII_ANLPRNP = 8, - MII_MSCR = 9, - MII_MSSR = 10, - MII_ESR = 15, MII_PHY_SCR = 16, }; + /* PCS register */ enum _pcs_reg { PCS_BMCR = 0, @@ -297,102 +287,6 @@ enum _pcs_reg { PCS_ESR = 15, }; -/* Basic Mode Control Register */ -enum _mii_bmcr { - MII_BMCR_RESET = 0x8000, - MII_BMCR_LOOP_BACK = 0x4000, - MII_BMCR_SPEED_LSB = 0x2000, - MII_BMCR_AN_ENABLE = 0x1000, - MII_BMCR_POWER_DOWN = 0x0800, - MII_BMCR_ISOLATE = 0x0400, - MII_BMCR_RESTART_AN = 0x0200, - MII_BMCR_DUPLEX_MODE = 0x0100, - MII_BMCR_COL_TEST = 0x0080, - MII_BMCR_SPEED_MSB = 0x0040, - MII_BMCR_SPEED_RESERVED = 0x003f, - MII_BMCR_SPEED_10 = 0, - MII_BMCR_SPEED_100 = MII_BMCR_SPEED_LSB, - MII_BMCR_SPEED_1000 = MII_BMCR_SPEED_MSB, -}; - -/* Basic Mode Status Register */ -enum _mii_bmsr { - MII_BMSR_100BT4 = 0x8000, - MII_BMSR_100BX_FD = 0x4000, - MII_BMSR_100BX_HD = 0x2000, - MII_BMSR_10BT_FD = 0x1000, - MII_BMSR_10BT_HD = 0x0800, - MII_BMSR_100BT2_FD = 0x0400, - MII_BMSR_100BT2_HD = 0x0200, - MII_BMSR_EXT_STATUS = 0x0100, - MII_BMSR_PREAMBLE_SUPP = 0x0040, - MII_BMSR_AN_COMPLETE = 0x0020, - MII_BMSR_REMOTE_FAULT = 0x0010, - MII_BMSR_AN_ABILITY = 0x0008, - MII_BMSR_LINK_STATUS = 0x0004, - MII_BMSR_JABBER_DETECT = 0x0002, - MII_BMSR_EXT_CAP = 0x0001, -}; - -/* ANAR */ -enum _mii_anar { - MII_ANAR_NEXT_PAGE = 0x8000, - MII_ANAR_REMOTE_FAULT = 0x4000, - MII_ANAR_ASYMMETRIC = 0x0800, - MII_ANAR_PAUSE = 0x0400, - MII_ANAR_100BT4 = 0x0200, - MII_ANAR_100BX_FD = 0x0100, - MII_ANAR_100BX_HD = 0x0080, - MII_ANAR_10BT_FD = 0x0020, - MII_ANAR_10BT_HD = 0x0010, - MII_ANAR_SELECTOR = 0x001f, - MII_IEEE8023_CSMACD = 0x0001, -}; - -/* ANLPAR */ -enum _mii_anlpar { - MII_ANLPAR_NEXT_PAGE = MII_ANAR_NEXT_PAGE, - MII_ANLPAR_REMOTE_FAULT = MII_ANAR_REMOTE_FAULT, - MII_ANLPAR_ASYMMETRIC = MII_ANAR_ASYMMETRIC, - MII_ANLPAR_PAUSE = MII_ANAR_PAUSE, - MII_ANLPAR_100BT4 = MII_ANAR_100BT4, - MII_ANLPAR_100BX_FD = MII_ANAR_100BX_FD, - MII_ANLPAR_100BX_HD = MII_ANAR_100BX_HD, - MII_ANLPAR_10BT_FD = MII_ANAR_10BT_FD, - MII_ANLPAR_10BT_HD = MII_ANAR_10BT_HD, - MII_ANLPAR_SELECTOR = MII_ANAR_SELECTOR, -}; - -/* Auto-Negotiation Expansion Register */ -enum _mii_aner { - MII_ANER_PAR_DETECT_FAULT = 0x0010, - MII_ANER_LP_NEXTPAGABLE = 0x0008, - MII_ANER_NETXTPAGABLE = 0x0004, - MII_ANER_PAGE_RECEIVED = 0x0002, - MII_ANER_LP_NEGOTIABLE = 0x0001, -}; - -/* MASTER-SLAVE Control Register */ -enum _mii_mscr { - MII_MSCR_TEST_MODE = 0xe000, - MII_MSCR_CFG_ENABLE = 0x1000, - MII_MSCR_CFG_VALUE = 0x0800, - MII_MSCR_PORT_VALUE = 0x0400, - MII_MSCR_1000BT_FD = 0x0200, - MII_MSCR_1000BT_HD = 0X0100, -}; - -/* MASTER-SLAVE Status Register */ -enum _mii_mssr { - MII_MSSR_CFG_FAULT = 0x8000, - MII_MSSR_CFG_RES = 0x4000, - MII_MSSR_LOCAL_RCV_STATUS = 0x2000, - MII_MSSR_REMOTE_RCVR = 0x1000, - MII_MSSR_LP_1000BT_FD = 0x0800, - MII_MSSR_LP_1000BT_HD = 0x0400, - MII_MSSR_IDLE_ERR_COUNT = 0x00ff, -}; - /* IEEE Extened Status Register */ enum _mii_esr { MII_ESR_1000BX_FD = 0x8000, -- 2.7.4