From 7817cb2083d982923752fe0f12b67c0e7c09a027 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Sun, 30 Dec 2007 03:30:46 +0100 Subject: [PATCH] fix comments with new drivers organization Signed-off-by: Marcel Ziswiler --- README | 4 ++-- board/sc3/sc3.c | 2 +- board/ssv/common/cmd_sled.c | 4 ++-- common/env_nand.c | 2 +- cpu/ppc4xx/4xx_pci.c | 2 +- doc/README.generic_usb_ohci | 2 +- doc/README.modnet50 | 4 ++-- drivers/mtd/nand/nand_util.c | 2 +- drivers/net/sk98lin/Makefile | 2 +- drivers/usb/isp116x-hcd.c | 2 +- drivers/usb/usbdcore_mpc8xx.c | 3 ++- drivers/video/cfb_console.c | 8 ++++---- fs/jffs2/jffs2_1pass.c | 2 +- include/configs/CATcenter.h | 2 +- include/configs/MPC8313ERDB.h | 2 +- include/configs/PPChameleonEVB.h | 2 +- include/configs/SX1.h | 2 +- include/configs/integratorcp.h | 2 +- include/configs/omap1510inn.h | 2 +- include/configs/omap2420h4.h | 2 +- include/configs/omap5912osk.h | 2 +- nand_spl/board/amcc/acadia/Makefile | 2 +- nand_spl/board/amcc/bamboo/Makefile | 2 +- nand_spl/board/amcc/sequoia/Makefile | 2 +- 24 files changed, 31 insertions(+), 30 deletions(-) diff --git a/README b/README index 9a8b3b9..57fc01a 100644 --- a/README +++ b/README @@ -924,7 +924,7 @@ The following options need to be configured: (i.e. setenv videomode 317; saveenv; reset;) - "videomode=bootargs" all the video parameters are parsed - from the bootargs. (See drivers/videomodes.c) + from the bootargs. (See drivers/video/videomodes.c) CONFIG_VIDEO_SED13806 @@ -1353,7 +1353,7 @@ The following options need to be configured: CONFIG_FSL_I2C Define this option if you want to use Freescale's I2C driver in - drivers/fsl_i2c.c. + drivers/i2c/fsl_i2c.c. - SPI Support: CONFIG_SPI diff --git a/board/sc3/sc3.c b/board/sc3/sc3.c index 363a77d..0940764 100644 --- a/board/sc3/sc3.c +++ b/board/sc3/sc3.c @@ -757,7 +757,7 @@ static struct pci_config_table pci_solidcard3_config_table[] = }; /*-------------------------------------------------------------------------+ - | pci_init_board (Called from pci_init() in drivers/pci.c) + | pci_init_board (Called from pci_init() in drivers/pci/pci.c) | | Init the PCI part of the SolidCard III | diff --git a/board/ssv/common/cmd_sled.c b/board/ssv/common/cmd_sled.c index 713ed65..2208580 100644 --- a/board/ssv/common/cmd_sled.c +++ b/board/ssv/common/cmd_sled.c @@ -32,8 +32,8 @@ * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! * !!!!! !!!!! * !!!!! Next type definition was coming from original !!!!! - * !!!!! status LED driver drivers/status_led.c and !!!!! - * !!!!! should exported for using here. !!!!! + * !!!!! status LED driver drivers/misc/status_led.c !!!!! + * !!!!! and should be exported for using it here. !!!!! * !!!!! !!!!! * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! */ diff --git a/common/env_nand.c b/common/env_nand.c index 38a07f8..ce0a251 100644 --- a/common/env_nand.c +++ b/common/env_nand.c @@ -57,7 +57,7 @@ int nand_legacy_rw (struct nand_chip* nand, int cmd, size_t start, size_t len, size_t * retlen, u_char * buf); -/* info for NAND chips, defined in drivers/nand/nand.c */ +/* info for NAND chips, defined in drivers/mtd/nand/nand.c */ extern nand_info_t nand_info[]; /* references to names in env_common.c */ diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c index a68c419..a5b9690 100644 --- a/cpu/ppc4xx/4xx_pci.c +++ b/cpu/ppc4xx/4xx_pci.c @@ -339,7 +339,7 @@ void pci_405gp_init(struct pci_controller *hose) } /* - * drivers/pci.c skips every host bridge but the 405GP since it could + * drivers/pci/pci.c skips every host bridge but the 405GP since it could * be set as an Adapter. * * I (Andrew May) don't know what we should do here, but I don't want diff --git a/doc/README.generic_usb_ohci b/doc/README.generic_usb_ohci index 494dd1f..c44c501 100644 --- a/doc/README.generic_usb_ohci +++ b/doc/README.generic_usb_ohci @@ -1,7 +1,7 @@ Notes on the the generic USB-OHCI driver ======================================== -This driver (drivers/usb_ohci.[ch]) is the result of the merge of +This driver (drivers/usb/usb_ohci.[ch]) is the result of the merge of various existing OHCI drivers that were basically identical beside cpu/board dependant initalization. This initalization has been moved into cpu/board directories and are called via the hooks below. diff --git a/doc/README.modnet50 b/doc/README.modnet50 index 30338ce..f7bb254 100644 --- a/doc/README.modnet50 +++ b/doc/README.modnet50 @@ -51,8 +51,8 @@ board/modnet50/lowlevel_init.S .. memory setup for ModNET50 board/modnet50/flash.c .. flash routines board/modnet50/modnet50.c .. some board init stuff -drivers/netarm_eth.c .. ethernet driver for the NET+50 CPU -drivers/netarm_eth.h .. header for ethernet driver +drivers/net/netarm_eth.c .. ethernet driver for the NET+50 CPU +drivers/net/netarm_eth.h .. header for ethernet driver include/configs/modnet50.h .. configuration file for ModNET50 diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c index 4fd4e16..6c5624a 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/nand_util.c @@ -1,5 +1,5 @@ /* - * drivers/nand/nand_util.c + * drivers/mtd/nand/nand_util.c * * Copyright (C) 2006 by Weiss-Electronic GmbH. * All rights reserved. diff --git a/drivers/net/sk98lin/Makefile b/drivers/net/sk98lin/Makefile index a7d4a3b..8b83fae 100644 --- a/drivers/net/sk98lin/Makefile +++ b/drivers/net/sk98lin/Makefile @@ -20,7 +20,7 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # -# File: drivers/sk98lin/Makefile +# File: drivers/net/sk98lin/Makefile # # Makefile for the SysKonnect SK-98xx device driver. # diff --git a/drivers/usb/isp116x-hcd.c b/drivers/usb/isp116x-hcd.c index b21af10..ac67030 100644 --- a/drivers/usb/isp116x-hcd.c +++ b/drivers/usb/isp116x-hcd.c @@ -20,7 +20,7 @@ * MA 02111-1307 USA * * - * Derived in part from the SL811 HCD driver "u-boot/drivers/sl811_usb.c" + * Derived in part from the SL811 HCD driver "u-boot/drivers/usb/sl811_usb.c" * (original copyright message follows): * * (C) Copyright 2004 diff --git a/drivers/usb/usbdcore_mpc8xx.c b/drivers/usb/usbdcore_mpc8xx.c index d4c4096..122793c 100644 --- a/drivers/usb/usbdcore_mpc8xx.c +++ b/drivers/usb/usbdcore_mpc8xx.c @@ -3,7 +3,8 @@ * bodonoghue@CodeHermit.ie * * References - * DasUBoot/drivers/usbdcore_omap1510.c, for design and implementation ideas. + * DasUBoot/drivers/usb/usbdcore_omap1510.c, for design and implementation + * ideas. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index bcf8771..82cc0c7 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -187,9 +187,9 @@ CONFIG_VIDEO_HW_CURSOR: - Uses the hardware cursor capability of the /*****************************************************************************/ /* Cursor definition: */ -/* CONFIG_CONSOLE_CURSOR: Uses a timer function (see drivers/i8042.c) to */ -/* let the cursor blink. Uses the macros CURSOR_OFF */ -/* and CURSOR_ON. */ +/* CONFIG_CONSOLE_CURSOR: Uses a timer function (see drivers/input/i8042.c) */ +/* to let the cursor blink. Uses the macros */ +/* CURSOR_OFF and CURSOR_ON. */ /* CONFIG_VIDEO_SW_CURSOR: Draws a cursor after the last character. No */ /* blinking is provided. Uses the macros CURSOR_SET */ /* and CURSOR_OFF. */ @@ -217,7 +217,7 @@ void console_cursor (int state); #define CURSOR_OFF console_cursor(0); #define CURSOR_SET #ifndef CONFIG_I8042_KBD -#warning Cursor drawing on/off needs timer function s.a. drivers/i8042.c +#warning Cursor drawing on/off needs timer function s.a. drivers/input/i8042.c #endif #else #ifdef CONFIG_CONSOLE_TIME diff --git a/fs/jffs2/jffs2_1pass.c b/fs/jffs2/jffs2_1pass.c index 5316668..69f53ea 100644 --- a/fs/jffs2/jffs2_1pass.c +++ b/fs/jffs2/jffs2_1pass.c @@ -165,7 +165,7 @@ static struct part_info *current_part; int read_jffs2_nand(size_t start, size_t len, size_t * retlen, u_char * buf, int nanddev); #else -/* info for NAND chips, defined in drivers/nand/nand.c */ +/* info for NAND chips, defined in drivers/mtd/nand/nand.c */ extern nand_info_t nand_info[]; #endif diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h index 0321650..1603c9c 100644 --- a/include/configs/CATcenter.h +++ b/include/configs/CATcenter.h @@ -473,7 +473,7 @@ #define CONFIG_VGA_AS_SINGLE_DEVICE /* This is the base address (on 405EP-side) used to generate I/O accesses on PCI bus */ #define CFG_ISA_IO 0xE8000000 -/* see also drivers/videomodes.c */ +/* see also drivers/video/videomodes.c */ #define CFG_DEFAULT_VIDEO_MODE 0x303 #endif diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index c9a9c83..7bc4e27 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -192,7 +192,7 @@ #define CFG_LBC_MRTPR 0x20000000 /*TODO */ /* LB refresh timer prescal, 266MHz/32 */ -/* drivers/nand/nand.c */ +/* drivers/mtd/nand/nand.c */ #define CFG_NAND_BASE 0xE2800000 /* 0xF0000000 */ #define CFG_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS 1 diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index c2aa2cc..cf98324 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -496,7 +496,7 @@ #define CONFIG_VGA_AS_SINGLE_DEVICE /* This is the base address (on 405EP-side) used to generate I/O accesses on PCI bus */ #define CFG_ISA_IO 0xE8000000 -/* see also drivers/videomodes.c */ +/* see also drivers/video/videomodes.c */ #define CFG_DEFAULT_VIDEO_MODE 0x303 #endif diff --git a/include/configs/SX1.h b/include/configs/SX1.h index 05cef87..50ad7dd 100644 --- a/include/configs/SX1.h +++ b/include/configs/SX1.h @@ -181,7 +181,7 @@ * FLASH driver setup */ #define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ -#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/mtd/cfi_flash.c */ #define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ #define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index 69310d4..e1d1483 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -168,7 +168,7 @@ SIB at Block62 End Block62 address 0x24f80000 /* * Move up the U-Boot & monitor area if more flash is fitted. * If this U-Boot is to be run on Integrators with varying flash sizes, - * drivers/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG + * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG * register and dynamically assign CFG_ENV_ADDR & CFG_MONITOR_BASE * - CFG_MONITOR_BASE is set to indicate that the environment is not * embedded in the boot monitor(s) area diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h index 8623ed3..0be46ea 100644 --- a/include/configs/omap1510inn.h +++ b/include/configs/omap1510inn.h @@ -179,7 +179,7 @@ * FLASH driver setup */ #define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ -#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/mtd/cfi_flash.c */ #define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ #define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h index 8ae8efe..88a3f6e 100644 --- a/include/configs/omap2420h4.h +++ b/include/configs/omap2420h4.h @@ -283,7 +283,7 @@ * CFI FLASH driver setup */ #define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ -#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/mtd/cfi_flash.c */ #define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ #define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h index 16ce2f6..e3bde4f 100644 --- a/include/configs/omap5912osk.h +++ b/include/configs/omap5912osk.h @@ -174,7 +174,7 @@ * FLASH driver setup */ #define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ -#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/mtd/cfi_flash.c */ #define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 } diff --git a/nand_spl/board/amcc/acadia/Makefile b/nand_spl/board/amcc/acadia/Makefile index 6e53bea..4272108 100644 --- a/nand_spl/board/amcc/acadia/Makefile +++ b/nand_spl/board/amcc/acadia/Makefile @@ -97,7 +97,7 @@ $(obj)nand_boot.c: @rm -f $(obj)nand_boot.c ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c -# from drivers/nand directory +# from drivers/mtd/nand directory $(obj)nand_ecc.c: @rm -f $(obj)nand_ecc.c ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c diff --git a/nand_spl/board/amcc/bamboo/Makefile b/nand_spl/board/amcc/bamboo/Makefile index 3a633fb..aed7960 100644 --- a/nand_spl/board/amcc/bamboo/Makefile +++ b/nand_spl/board/amcc/bamboo/Makefile @@ -79,7 +79,7 @@ $(obj)nand_boot.c: @rm -f $(obj)nand_boot.c ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c -# from drivers/nand directory +# from drivers/mtd/nand directory $(obj)nand_ecc.c: @rm -f $(obj)nand_ecc.c ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile index dfa0ce3..93150aa 100644 --- a/nand_spl/board/amcc/sequoia/Makefile +++ b/nand_spl/board/amcc/sequoia/Makefile @@ -89,7 +89,7 @@ $(obj)nand_boot.c: @rm -f $(obj)nand_boot.c ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c -# from drivers/nand directory +# from drivers/mtd/nand directory $(obj)nand_ecc.c: @rm -f $(obj)nand_ecc.c ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c -- 2.7.4