From 771d7a99ed66fb4b569c16d3fd753dc024427fc8 Mon Sep 17 00:00:00 2001 From: Steve Chamberlain Date: Mon, 23 Jan 1995 08:09:02 +0000 Subject: [PATCH] Mon Jan 23 00:06:57 1995 Steve Chamberlain * remote-e7000.c, remote-z8k.c, remote-nindy.c (target_ops): Define memory_insert/remove_breakpoint. * xm-go32.h: Remove redundant SIGs. Thu Jan 19 20:26:58 1995 Steve Chamberlain * ser-go32.c: Rewritten by nigel@algor.co.uk. --- gdb/config/i386/xm-go32.h | 7 - gdb/remote-nindy.c | 3 +- gdb/remote-z8k.c | 3 +- gdb/ser-go32.c | 1042 +++++++++++++++++++++++++++++++-------------- 4 files changed, 733 insertions(+), 322 deletions(-) diff --git a/gdb/config/i386/xm-go32.h b/gdb/config/i386/xm-go32.h index a36fe91..eee636f 100644 --- a/gdb/config/i386/xm-go32.h +++ b/gdb/config/i386/xm-go32.h @@ -30,10 +30,3 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #define QUIT { pollquit(); } #define GDBINIT_FILENAME "gdb.ini" - -#if !defined(SIGURG) & !defined(SIGALRM) & !defined(SIGBUS) & !defined(SIGSTOP) -#define SIGURG (NSIG) -#define SIGALRM (NSIG + 1) -#define SIGBUS (NSIG + 2) -#define SIGSTOP (NSIG + 3) -#endif /* missing some signals */ diff --git a/gdb/remote-nindy.c b/gdb/remote-nindy.c index 0c2c98c..dd3dc0b 100644 --- a/gdb/remote-nindy.c +++ b/gdb/remote-nindy.c @@ -738,7 +738,8 @@ specified when you started GDB.", nindy_fetch_registers, nindy_store_registers, nindy_prepare_to_store, nindy_xfer_inferior_memory, nindy_files_info, - 0, 0, /* insert_breakpoint, remove_breakpoint, */ + memory_insert_breakpoint, + memory_remove_breakpoint, 0, 0, 0, 0, 0, /* Terminal crud */ nindy_kill, generic_load, diff --git a/gdb/remote-z8k.c b/gdb/remote-z8k.c index 0f43db0..df01e54 100644 --- a/gdb/remote-z8k.c +++ b/gdb/remote-z8k.c @@ -335,7 +335,8 @@ struct target_ops sim_ops = sim_prepare_to_store, sim_xfer_inferior_memory, sim_files_info, - 0, 0, /* Breakpoints */ + memory_insert_breakpoint, + memory_remove_breakpoint, 0, 0, 0, 0, 0, /* Terminal handling */ sim_kill, /* FIXME, kill */ sim_load, diff --git a/gdb/ser-go32.c b/gdb/ser-go32.c index b1b5331..70887f0 100644 --- a/gdb/ser-go32.c +++ b/gdb/ser-go32.c @@ -1,7 +1,12 @@ -/* Remote serial interface for local (hardwired) serial ports for GO32. - Copyright 1992, 1993 Free Software Foundation, Inc. +/* Remote serial interface for local (hardwired) serial ports for + GO32. Copyright 1992, 1993 Free Software Foundation, Inc. - This file is part of GDB. + Contributed by Nigel Stephens, Algorithmics Ltd. (nigel@algor.co.uk). + + This version uses DPMI interrupts to handle buffered i/o + without the separate "asynctsr" program. + + This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -18,461 +23,872 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "defs.h" +#include "gdbcmd.h" #include "serial.h" + + +/* + * NS16550 UART registers + */ + +#define COM1ADDR 0x3f8 +#define COM2ADDR 0x2f8 +#define COM3ADDR 0x3e8 +#define COM4ADDR 0x3e0 + +#define com_data 0 /* data register (R/W) */ +#define com_dlbl 0 /* divisor latch low (W) */ +#define com_ier 1 /* interrupt enable (W) */ +#define com_dlbh 1 /* divisor latch high (W) */ +#define com_iir 2 /* interrupt identification (R) */ +#define com_fifo 2 /* FIFO control (W) */ +#define com_lctl 3 /* line control register (R/W) */ +#define com_cfcr 3 /* line control register (R/W) */ +#define com_mcr 4 /* modem control register (R/W) */ +#define com_lsr 5 /* line status register (R/W) */ +#define com_msr 6 /* modem status register (R/W) */ + +/* + * Constants for computing 16 bit baud rate divisor (lower byte + * in com_dlbl, upper in com_dlbh) from 1.8432MHz crystal. Divisor is + * 1.8432 MHz / (16 * X) for X bps. If the baud rate can't be set + * to within +- (desired_rate*SPEED_TOLERANCE/1000) bps, we fail. + */ +#define COMTICK (1843200/16) +#define SPEED_TOLERANCE 30 /* thousandths; real == desired +- 3.0% */ + +/* interrupt enable register */ +#define IER_ERXRDY 0x1 /* int on rx ready */ +#define IER_ETXRDY 0x2 /* int on tx ready */ +#define IER_ERLS 0x4 /* int on line status change */ +#define IER_EMSC 0x8 /* int on modem status change */ + +/* interrupt identification register */ +#define IIR_FIFO_MASK 0xc0 /* set if FIFOs are enabled */ +#define IIR_IMASK 0xf /* interrupt cause mask */ +#define IIR_NOPEND 0x1 /* nothing pending */ +#define IIR_RLS 0x6 /* receive line status */ +#define IIR_RXRDY 0x4 /* receive ready */ +#define IIR_RXTOUT 0xc /* receive timeout */ +#define IIR_TXRDY 0x2 /* transmit ready */ +#define IIR_MLSC 0x0 /* modem status */ + + +/* fifo control register */ +#define FIFO_ENABLE 0x01 /* enable fifo */ +#define FIFO_RCV_RST 0x02 /* reset receive fifo */ +#define FIFO_XMT_RST 0x04 /* reset transmit fifo */ +#define FIFO_DMA_MODE 0x08 /* enable dma mode */ +#define FIFO_TRIGGER_1 0x00 /* trigger at 1 char */ +#define FIFO_TRIGGER_4 0x40 /* trigger at 4 chars */ +#define FIFO_TRIGGER_8 0x80 /* trigger at 8 chars */ +#define FIFO_TRIGGER_14 0xc0 /* trigger at 14 chars */ + +/* character format control register */ +#define CFCR_DLAB 0x80 /* divisor latch */ +#define CFCR_SBREAK 0x40 /* send break */ +#define CFCR_PZERO 0x30 /* zero parity */ +#define CFCR_PONE 0x20 /* one parity */ +#define CFCR_PEVEN 0x10 /* even parity */ +#define CFCR_PODD 0x00 /* odd parity */ +#define CFCR_PENAB 0x08 /* parity enable */ +#define CFCR_STOPB 0x04 /* 2 stop bits */ +#define CFCR_8BITS 0x03 /* 8 data bits */ +#define CFCR_7BITS 0x02 /* 7 data bits */ +#define CFCR_6BITS 0x01 /* 6 data bits */ +#define CFCR_5BITS 0x00 /* 5 data bits */ + +/* modem control register */ +#define MCR_LOOPBACK 0x10 /* loopback */ +#define MCR_IENABLE 0x08 /* output 2 = int enable */ +#define MCR_DRS 0x04 /* output 1 = xxx */ +#define MCR_RTS 0x02 /* enable RTS */ +#define MCR_DTR 0x01 /* enable DTR */ + +/* line status register */ +#define LSR_RCV_FIFO 0x80 /* error in receive fifo */ +#define LSR_TSRE 0x40 /* transmitter empty */ +#define LSR_TXRDY 0x20 /* transmitter ready */ +#define LSR_BI 0x10 /* break detected */ +#define LSR_FE 0x08 /* framing error */ +#define LSR_PE 0x04 /* parity error */ +#define LSR_OE 0x02 /* overrun error */ +#define LSR_RXRDY 0x01 /* receiver ready */ +#define LSR_RCV_MASK 0x1f + +/* modem status register */ +#define MSR_DCD 0x80 +#define MSR_RI 0x40 +#define MSR_DSR 0x20 +#define MSR_CTS 0x10 +#define MSR_DDCD 0x08 +#define MSR_TERI 0x04 +#define MSR_DDSR 0x02 +#define MSR_DCTS 0x01 + #include +#include +#include + +/* DPMI Communication */ +static union REGS dpmi_regs; +static struct SREGS dpmi_sregs; + +/* 16550 rx fifo trigger point */ +#define FIFO_TRIGGER FIFO_TRIGGER_4 + +/* input buffer size */ +#define CBSIZE 4096 + +/* return raw 18Hz clock count */ +extern long rawclock (void); + +#define RAWHZ 18 + +#ifdef DOS_STATS +#define CNT_RX 16 +#define CNT_TX 17 +#define CNT_STRAY 18 +#define CNT_ORUN 19 +#define NCNT 20 + +static int intrcnt; +static int cnts[NCNT]; +static char *cntnames[NCNT] = { + /* h/w interrupt counts. */ + "mlsc", "nopend", "txrdy", "?3", + "rxrdy", "?5", "rls", "?7", + "?8", "?9", "?a", "?b", + "rxtout", "?d", "?e", "?f", + /* s/w counts. */ + "rxcnt", "txcnt", "stray", "swoflo" +}; -#define disable() asm("cli") -#define enable() asm("sti") - - -struct go32_ttystate - { - int bogus; - }; -typedef struct - { - short jmp_op; - short signature; - short version; - short buffer_start; - short buffer_end; - short getp; - short putp; - short iov; - short count; - short overflow; - short buffer_size; - short ovflushes; - } -ASYNC_STRUCT; - -#define AOFF_JMP_OP 0 -#define AOFF_SIGNATURE 2 -#define AOFF_VERSION 4 -#define AOFF_BUFFER_START 6 -#define AOFF_BUFFER_END 8 -#define AOFF_GETP 10 -#define AOFF_PUTP 12 -#define AOFF_IOV 14 -#define AOFF_COUNT 16 -#define AOFF_OVERFLOW 18 -#define AOFF_BUFFER_SIZE 20 -#define AOFF_OVFLUSHES 22 - - -static ASYNC_STRUCT a; /* Copy in our mem of the struct */ -static long aindex; /* index into dos space of struct */ - -static int go32_open PARAMS ((serial_t scb, const char *name)); -static void go32_raw PARAMS ((serial_t scb)); -static int go32_readchar PARAMS ((serial_t scb, int timeout)); -static int go32_setbaudrate PARAMS ((serial_t scb, int rate)); -static int go32_write PARAMS ((serial_t scb, const char *str, int len)); -static void go32_close PARAMS ((serial_t scb)); -static serial_ttystate go32_get_tty_state PARAMS ((serial_t scb)); -static int go32_set_tty_state PARAMS ((serial_t scb, serial_ttystate state)); -static unsigned char aptr PARAMS ((short p)); -static unsigned long getivec PARAMS ((int which)); -static int dos_async_init PARAMS ((int port)); -static void dos_async_tx PARAMS ((const char c)); -static int dos_async_rx PARAMS (()); -static int dosasync_read PARAMS ((int fd, char *buf, int len, int timeout)); -static int dosasync_write PARAMS ((int fd, const char *buf, int len)); - -#define SIGNATURE 0x4154 -#define VERSION 1 -#define OFFSET 0x104 - -char packet[50]; -int packet_len; -int packet_idx; - -unsigned char bb; -unsigned short sb; -unsigned long sl; - -#define SET_BYTE(x,y) { char _buf = y;dosmemput(&_buf,1, x);} -#define SET_WORD(x,y) { short _buf = y;dosmemput(&_buf,2, x);} -#define GET_BYTE(x) ( dosmemget((x),1,&bb), bb) - - -#define GET_LONG(x) ( dosmemget((x),4,&sl), sl) - -static -unsigned short -GET_WORD (x) -{ - unsigned short sb; - dosmemget ((x), 2, &sb); - return sb; -} +#define COUNT(x) cnts[x]++ +#else +#define COUNT(x) +#endif -static int iov[2]; +/* Main interrupt controller port addresses. */ +#define ICU_BASE 0x20 +#define ICU_OCW2 (ICU_BASE + 0) +#define ICU_MASK (ICU_BASE + 1) -#define com_rb(n) iov[n] -#define com_tb(n) iov[n] -#define com_ier(n) iov[n]+1 -#define com_ifr(n) iov[n]+2 -#define com_bfr(n) iov[n]+3 -#define com_mcr(n) iov[n]+4 -#define com_lsr(n) iov[n]+5 -#define com_msr(n) iov[n]+6 +/* Original interrupt controller mask register. */ +unsigned char icu_oldmask; -static unsigned char -aptr (p) - short p; -{ - return GET_BYTE (aindex - OFFSET + p); -} +/* Maximum of 8 interrupts (we don't handle the slave icu yet). */ +#define NINTR 8 + +static struct intrupt +{ + char inuse; + struct dos_ttystate *port; + _go32_dpmi_seginfo old_rmhandler; + _go32_dpmi_seginfo old_pmhandler; + _go32_dpmi_seginfo new_rmhandler; + _go32_dpmi_seginfo new_pmhandler; + _go32_dpmi_registers regs; +} intrupts[NINTR]; -static unsigned long -getivec (int which) + +static struct dos_ttystate { - long tryaindex; + int base; + int irq; + struct intrupt *intrupt; + int fifo; + int baudrate; + unsigned char cbuf[CBSIZE]; + unsigned int first; + unsigned int count; + int txbusy; + unsigned char old_mcr; + int ferr; + int perr; + int oflo; + int msr; +} ports[4] = { + {COM1ADDR, 4}, + {COM2ADDR, 3}, + {COM3ADDR, 4}, + {COM4ADDR, 3} +}; - if (GET_WORD (which * 4) != OFFSET) - return 0; +static int dos_open PARAMS ((serial_t scb, const char *name)); +static void dos_raw PARAMS ((serial_t scb)); +static int dos_readchar PARAMS ((serial_t scb, int timeout)); +static int dos_setbaudrate PARAMS ((serial_t scb, int rate)); +static int dos_write PARAMS ((serial_t scb, const char *str, int len)); +static void dos_close PARAMS ((serial_t scb)); +static serial_ttystate dos_get_tty_state PARAMS ((serial_t scb)); +static int dos_set_tty_state PARAMS ((serial_t scb, serial_ttystate state)); +static int dos_baudconv PARAMS ((int rate)); - /* Find out where in memory this lives */ - tryaindex = GET_WORD (which * 4 + 2) * 16 + GET_WORD (which * 4); +#define inb(p,a) inportb((p)->base + (a)) +#define outb(p,a,v) outportb((p)->base + (a), (v)) +#define disable() asm volatile ("cli"); +#define enable() asm volatile ("sti"); - if (GET_WORD (tryaindex + 2) != SIGNATURE) - return 0; - if (GET_WORD (tryaindex + 4) != VERSION) - return 0; - return tryaindex; -} static int -dos_async_init (port) - int port; +dos_getc (port) + volatile struct dos_ttystate *port; { - switch (port) - { - case 1: - aindex = getivec (12); - break; - case 2: - aindex = getivec (11); - break; - default: - return 0; - } + int c; - if (!aindex) - { - error ("GDB cannot connect to asynctsr program, check that it is installed\n\ -and that serial I/O is not being redirected (perhaps by NFS)\n\n\ -example configuration:\n\ -C> mode com%d:9600,n,8,1,p\n\ -C> asynctsr %d\n\ -C> gdb \n", port, port); - } + if (port->count == 0) + return -1; - iov[0] = GET_WORD (aindex + AOFF_IOV); - outportb (com_ier (0), 0x0f); - outportb (com_bfr (0), 0x03); - outportb (com_mcr (0), 0x0b); - return 1; + c = port->cbuf[port->first]; + disable (); + port->first = (port->first + 1) & (CBSIZE - 1); + port->count--; + enable (); + return c; } + -static void -dos_async_tx (c) - const char c; +static int +dos_putc (c, port) + int c; + struct dos_ttystate *port; { - while (~inportb (com_lsr (0)) & 0x20) - ; - outportb (com_tb (0), c); + if (port->count >= CBSIZE - 1) + return -1; + port->cbuf[(port->first + port->count) & (CBSIZE - 1)] = c; + port->count++; + return 0; } -static int -dos_async_ready () -{ - int ret; + - if (packet_idx < packet_len) - return 1; +static void +dos_comisr (irq) + int irq; +{ + struct dos_ttystate *port; + unsigned char iir, lsr, c; - disable (); -#if RDY_CNT - ret = GET_WORD (aindex + AOFF_COUNT); -#else - ret = GET_WORD (aindex + AOFF_GETP) != GET_WORD (aindex + AOFF_PUTP); + disable (); /* Paranoia */ + outportb (ICU_OCW2, 0x20); /* End-Of-Interrupt */ +#ifdef DOS_STATS + ++intrcnt; #endif - enable (); - return ret; - - -} -static int -dos_async_rx () -{ - char rv; - short idx; + port = intrupts[irq].port; + if (!port) + { + COUNT (CNT_STRAY); + return; /* not open */ + } while (1) { - if (packet_idx < packet_len) - { - char x = packet[packet_idx++]; - return x; - } - while (!dos_async_ready ()) + iir = inb (port, com_iir) & IIR_IMASK; + switch (iir) { - if (kbhit ()) + + case IIR_RLS: + lsr = inb (port, com_lsr); + goto rx; + + case IIR_RXTOUT: + case IIR_RXRDY: + lsr = 0; + + rx: + do { - printf_unfiltered ("abort!\n"); - return 0; + c = inb (port, com_data); + if (lsr & (LSR_BI | LSR_FE | LSR_PE | LSR_OE)) + { + if (lsr & (LSR_BI | LSR_FE)) + port->ferr++; + else if (lsr & LSR_PE) + port->perr++; + if (lsr & LSR_OE) + port->oflo++; + } + + if (dos_putc (c & 0x7f, port) < 0) + { + COUNT (CNT_ORUN); + } + else + { + COUNT (CNT_RX); + } } + while ((lsr = inb (port, com_lsr)) & LSR_RXRDY); + break; + + case IIR_MLSC: + /* could be used to flowcontrol Tx */ + port->msr = inb (port, com_msr); + break; + + case IIR_TXRDY: + port->txbusy = 0; + break; + + case IIR_NOPEND: + /* no more pending interrupts, all done */ + return; + + default: + /* unexpected interrupt, ignore */ + break; } - disable (); - { - /* Sometimes we can read more than one char at a time - from the buffer, which is good, cause it'll mean - less time with interrupts turned off, which means - less dropped characters */ + COUNT (iir); + } +} - /* We only do the simplest case here - not bothering with - wrap around */ - int len; +#ifdef __STDC__ +#define ISRNAME(x) dos_comisr##x +#else +#define ISRNAME(x) dos_comisr/**/x +#endif +#define ISR(x) static void ISRNAME(x)() {dos_comisr(x);} - int getp = GET_WORD (aindex + AOFF_GETP); - int putp = GET_WORD (aindex + AOFF_PUTP); - int endb = GET_WORD (aindex + AOFF_BUFFER_END); - int startb = GET_WORD (aindex + AOFF_BUFFER_START); +ISR(0) ISR(1) ISR(2) ISR(3) +ISR(4) ISR(5) ISR(6) ISR(7) - /* We'd like to grab to the end of the the input, - but it may have wrapped, so max is to the end - of the buffer */ +typedef void (*isr_t)(); - if (putp > endb || putp < getp) - putp = endb; +static isr_t isrs[NINTR] = { + ISRNAME(0), ISRNAME(1), ISRNAME(2), ISRNAME(3), + ISRNAME(4), ISRNAME(5), ISRNAME(6), ISRNAME(7) +}; - /* Work out the length of the suck */ - len = putp - getp; + - /* But only suck as many as we can hold in one go */ - if (len > sizeof (packet)) - len = sizeof (packet); +static struct intrupt * +dos_hookirq (irq) + unsigned int irq; +{ + struct intrupt *intr; + unsigned int vec; + isr_t isr; - dosmemget (aindex - OFFSET + getp, len, packet); + if (irq >= NINTR) + return 0; - packet_len = len; - packet_idx = 0; + intr = &intrupts[irq]; + if (intr->inuse) + return 0; + + vec = 0x08 + irq; + isr = isrs[irq]; - if (getp + len >= endb) - { - getp = startb; - } - else - { - getp = getp + len; - } + /* setup real mode handler */ + _go32_dpmi_get_real_mode_interrupt_vector (vec, &intr->old_rmhandler); - SET_WORD (aindex + AOFF_GETP, getp); - SET_WORD (aindex + AOFF_COUNT, GET_WORD (aindex + AOFF_COUNT) - len); - } - enable (); + intr->new_rmhandler.pm_selector = _go32_my_cs(); + intr->new_rmhandler.pm_offset = (u_long)isr; + if (_go32_dpmi_allocate_real_mode_callback_iret (&intr->new_rmhandler, + &intr->regs)) + { + return 0; } -} + if (_go32_dpmi_set_real_mode_interrupt_vector (vec, &intr->new_rmhandler)) + { + return 0; + } + + /* setup protected mode handler */ + _go32_dpmi_get_protected_mode_interrupt_vector(vec, &intr->old_pmhandler); -static int -dosasync_read (fd, buf, len, timeout) - int fd; - char *buf; - int len; - int timeout; -{ - long now, then; - int i; - int its = 0; - time (&now); - then = now + timeout; + intr->new_pmhandler.pm_selector = _go32_my_cs(); + intr->new_pmhandler.pm_offset = (u_long)isr; + _go32_dpmi_allocate_iret_wrapper (&intr->new_pmhandler); - for (i = 0; i < len; i++) + if (_go32_dpmi_set_protected_mode_interrupt_vector(vec, &intr->new_pmhandler)) { - if (timeout) - { - while (!dos_async_ready ()) - { - time (&now); - if (now >= then && timeout > 0 && its > 1000) - return i; - its++; - } - } - *buf++ = dos_async_rx (); + return 0; } - return len; + + /* setup interrupt controller mask */ + disable (); + outportb (ICU_MASK, inportb (ICU_MASK) & ~(1 << irq)); + enable (); + + intr->inuse = 1; + return intr; } -static int -dosasync_write (fd, buf, len) - int fd; - const char *buf; - int len; + +static void +dos_unhookirq (intr) + struct intrupt *intr; { - int l; + unsigned int irq, vec; + unsigned char mask; - for (l = 0; l < len; l++) - dos_async_tx (*buf++); + irq = intr - intrupts; + vec = 0x08 + irq; - return len; + /* restore old interrupt mask bit */ + mask = 1 << irq; + disable (); + outportb (ICU_MASK, inportb (ICU_MASK) | (mask & icu_oldmask)); + enable (); + + /* remove real mode handler */ + _go32_dpmi_set_real_mode_interrupt_vector (vec, &intr->old_rmhandler); + _go32_dpmi_free_real_mode_callback (&intr->new_rmhandler); + + /* remove protected mode handler */ + _go32_dpmi_set_protected_mode_interrupt_vector (vec, &intr->old_pmhandler); + _go32_dpmi_free_iret_wrapper (&intr->new_pmhandler); + intr->inuse = 0; } + + static int -go32_open (scb, name) +dos_open (scb, name) serial_t scb; const char *name; { - int port; + struct dos_ttystate *port; + int fd, i; + + if (strncasecmp (name, "/dev/", 5) == 0) + name += 5; + else if (strncasecmp (name, "\\dev\\", 5) == 0) + name += 5; - if (strncasecmp (name, "com", 3) != 0) + if (strlen (name) != 4 || strncasecmp (name, "com", 3) != 0) { errno = ENOENT; return -1; } - port = name[3] - '0'; - - if ((port != 1) && (port != 2)) + if (name[3] < '1' || name[3] > '4') { errno = ENOENT; - return -11; + return -1; } - scb->fd = dos_async_init (port); - if (!scb->fd) - return -1; + fd = name[3] - '1'; + port = &ports[fd]; + if (port->intrupt) + { + /* already open (EBUSY not defined!) */ + errno = EACCES; + return -1; + } + + /* force access to ID reg */ + outb(port, com_cfcr, 0); + outb(port, com_iir, 0); + for (i = 0; i < 17; i++) { + if ((inb(port, com_iir) & 0x38) == 0) + goto ok; + (void) inb(port, com_data); /* clear recv */ + } + errno = ENODEV; + return -1; + +ok: + /* disable all interrupts in chip */ + outb(port, com_ier, 0); + + /* tentatively enable 16550 fifo, and see if it responds */ + outb(port, com_fifo, FIFO_ENABLE|FIFO_RCV_RST|FIFO_XMT_RST|FIFO_TRIGGER); + sleep(1); + port->fifo = ((inb(port, com_iir) & IIR_FIFO_MASK) == IIR_FIFO_MASK); + + /* clear pending status reports. */ + (void) inb(port, com_lsr); + (void) inb(port, com_msr); + + /* enable external interrupt gate (to avoid floating IRQ) */ + outb(port, com_mcr, MCR_IENABLE); + + /* hook up interrupt handler and initialise icu */ + port->intrupt = dos_hookirq (port->irq); + if (!port->intrupt) + { + outb(port, com_mcr, 0); + outb(port, com_fifo, 0); + errno = ENODEV; + return -1; + } + + disable (); + + /* record port */ + port->intrupt->port = port; + scb->fd = fd; + + /* clear rx buffer, tx busy flag and overflow count */ + port->first = port->count = 0; + port->txbusy = 0; + port->oflo = 0; + + /* set default baud rate and mode: 9600,8,n,1 */ + i = dos_baudconv (port->baudrate = 9600); + outb(port, com_cfcr, CFCR_DLAB); + outb(port, com_dlbl, i & 0xff); + outb(port, com_dlbh, i >> 8); + outb(port, com_cfcr, CFCR_8BITS); + + /* enable all interrupts */ + outb(port, com_ier, IER_ETXRDY | IER_ERXRDY | IER_ERLS | IER_EMSC); + + /* enable DTR & RTS */ + outb(port, com_mcr, MCR_DTR | MCR_RTS | MCR_IENABLE); + + enable (); return 0; } + +static void +dos_close (scb) + serial_t scb; +{ + struct dos_ttystate *port = &ports[scb->fd]; + struct intrupt *intrupt; + + if (!(intrupt = port->intrupt)) + return; + + /* disable interrupts, fifo, flow control */ + disable (); + port->intrupt = 0; + intrupt->port = 0; + outb(port, com_fifo, 0); + outb(port, com_ier, 0); + enable (); + + /* unhook handler, and disable interrupt gate */ + dos_unhookirq (intrupt); + outb(port, com_mcr, 0); + + /* Check for overflow errors */ + if (port->oflo) + { + fprintf_unfiltered (gdb_stderr, + "Serial input overruns occurred.\n"); + fprintf_unfiltered (gdb_stderr, "This system %s handle %d baud.\n", + port->fifo ? "cannot" : "needs a 16550 to", + port->baudrate); + } +} + + + static int -go32_noop (scb) +dos_noop (scb) serial_t scb; { return 0; } static void -go32_raw (scb) +dos_raw (scb) serial_t scb; { /* Always in raw mode */ } static int -go32_readchar (scb, timeout) +dos_readchar (scb, timeout) serial_t scb; int timeout; { - char buf; + struct dos_ttystate *port = &ports[scb->fd]; + long then; + int c; - /* Shortcut for polling */ - if (timeout == 0) + then = rawclock() + (timeout * RAWHZ); + while ((c = dos_getc (port)) < 0) { - if (dos_async_ready ()) - { - return dos_async_rx (); - } - return SERIAL_TIMEOUT; + if (timeout >= 0 && (rawclock () - then) >= 0) + return SERIAL_TIMEOUT; + notice_quit (); } - if (dosasync_read (scb->fd, &buf, 1, timeout)) - return buf; - else - return SERIAL_TIMEOUT; + return c; } -/* go32_{get set}_tty_state() are both dummys to fill out the function - vector. Someday, they may do something real... */ static serial_ttystate -go32_get_tty_state (scb) +dos_get_tty_state (scb) serial_t scb; { - struct go32_ttystate *state; - - state = (struct go32_ttystate *) xmalloc (sizeof *state); + struct dos_ttystate *port = &ports[scb->fd]; + struct dos_ttystate *state; + state = (struct dos_ttystate *) xmalloc (sizeof *state); + *state = *port; return (serial_ttystate) state; } static int -go32_set_tty_state (scb, ttystate) +dos_set_tty_state (scb, ttystate) serial_t scb; serial_ttystate ttystate; { + struct dos_ttystate *state; + + state = (struct dos_ttystate *) ttystate; + dos_setbaudrate (scb, state->baudrate); return 0; } static int -go32_noflush_set_tty_state (scb, new_ttystate, old_ttystate) +dos_noflush_set_tty_state (scb, new_ttystate, old_ttystate) serial_t scb; serial_ttystate new_ttystate; serial_ttystate old_ttystate; { + struct dos_ttystate *state; + + state = (struct dos_ttystate *) new_ttystate; + dos_setbaudrate (scb, state->baudrate); return 0; } +static int +dos_flush_input (scb) + serial_t scb; +{ + struct dos_ttystate *port = &ports[scb->fd]; + disable(); + port->first = port->count = 0; + if (port->fifo) + outb(port, com_fifo, FIFO_ENABLE|FIFO_RCV_RST|FIFO_TRIGGER); + enable(); +} + static void -go32_print_tty_state (scb, ttystate) +dos_print_tty_state (scb, ttystate) serial_t scb; serial_ttystate ttystate; { - /* Nothing to print. */ + /* Nothing to print */ return; } static int -go32_setbaudrate (scb, rate) - serial_t scb; +dos_baudconv (rate) int rate; { - return 0; + long x, err; + + if (rate <= 0) + return -1; + +#define divrnd(n, q) (((n) * 2 / (q) + 1) / 2) /* divide and round off */ + x = divrnd(COMTICK, rate); + if (x <= 0) + return -1; + + err = divrnd(1000 * COMTICK, x * rate) - 1000; + if (err < 0) + err = -err; + if (err > SPEED_TOLERANCE) + return -1; +#undef divrnd + return x; } + static int -go32_write (scb, str, len) +dos_setbaudrate (scb, rate) serial_t scb; - const char *str; - int len; + int rate; { - dosasync_write (scb->fd, str, len); + struct dos_ttystate *port = &ports[scb->fd]; - return 0; + if (port->baudrate != rate) + { + int x; + + x = dos_baudconv (rate); + if (x <= 0) + { + fprintf_unfiltered (gdb_stderr, "%d: impossible baudrate\n", rate); + errno = EINVAL; + return -1; + } + + disable (); + outb(port, com_cfcr, CFCR_DLAB); + outb(port, com_dlbl, x & 0xff); + outb(port, com_dlbh, x >> 8); + outb(port, com_cfcr, CFCR_8BITS); + port->baudrate = rate; + enable (); + } + + return 0; } -static void -go32_close (scb) + +static int +dos_write (scb, str, len) serial_t scb; + const char *str; + int len; { + volatile struct dos_ttystate *port = &ports[scb->fd]; + int fifosize = port->fifo ? 16 : 1; + long then; + int cnt; + + while (len > 0) + { + /* send the data, fifosize bytes at a time */ + cnt = fifosize > len ? len : fifosize; + port->txbusy = 1; + outportsb (port->base + com_data, str, cnt); + str += cnt; + len -= cnt; +#ifdef DOS_STATS + cnts[CNT_TX] += cnt; +#endif + /* wait for transmission to complete (max 1 sec) */ + then = rawclock() + RAWHZ; + while (port->txbusy) + { + if ((rawclock () - then) >= 0) + { + errno = EIO; + return SERIAL_ERROR; + } + } + } + return 0; } -static struct serial_ops go32_ops = +static struct serial_ops dos_ops = { "hardwire", 0, - go32_open, - go32_close, - go32_readchar, - go32_write, - go32_noop, /* flush output */ - go32_noop, /* flush input */ - go32_noop, /* send break -- currently used only for nindy */ - go32_raw, - go32_get_tty_state, - go32_set_tty_state, - go32_print_tty_state, - go32_noflush_set_tty_state, - go32_setbaudrate, + dos_open, + dos_close, + dos_readchar, + dos_write, + dos_noop, /* flush output */ + dos_flush_input, + dos_noop, /* send break -- currently used only for nindy */ + dos_raw, + dos_get_tty_state, + dos_set_tty_state, + dos_print_tty_state, + dos_noflush_set_tty_state, + dos_setbaudrate, }; + +static void +dos_info (arg, from_tty) + char *arg; + int from_tty; +{ + struct dos_ttystate *port; + int i; + + for (port = ports; port < &ports[4]; port++) + { + if (port->baudrate == 0) + continue; + printf_filtered ("Port:\tCOM%d (%sactive)\n", port - ports, + port->intrupt ? "" : "not "); + printf_filtered ("Addr:\t0x%03x (irq %d)\n", port->base, port->irq); + printf_filtered ("16550:\t%s\n", port->fifo ? "yes" : "no"); + printf_filtered ("Speed:\t%d baud\n", port->baudrate); + printf_filtered ("Errs:\tframing %d parity %d overflow %d\n", + port->ferr, port->perr, port->oflo); + } + +#ifdef DOS_STATS + printf_filtered ("\nTotal interrupts: %d\n", intrcnt); + for (i = 0; i < NCNT; i++) + if (cnts[i]) + printf_filtered ("%s:\t%d\n", cntnames[i], cnts[i]); +#endif +} + + void -_initialize_ser_go32 () +_initialize_ser_dos () { - serial_add_interface (&go32_ops); + struct cmd_list_element *c; + + serial_add_interface (&dos_ops); + + /* Save original interrupt mask register. */ + icu_oldmask = inportb (ICU_MASK); + + /* Mark fixed motherboard irqs as inuse. */ + intrupts[0].inuse = /* timer tick */ + intrupts[1].inuse = /* keyboard */ + intrupts[2].inuse = 1; /* slave icu */ + + add_show_from_set ( + add_set_cmd ("com1base", class_obscure, var_zinteger, + (char *) &ports[0].base, + "Set COM1 base i/o port address.", + &setlist), + &showlist); + + add_show_from_set ( + add_set_cmd ("com1irq", class_obscure, var_zinteger, + (char *) &ports[0].irq, + "Set COM1 interrupt request.", + &setlist), + &showlist); + + add_show_from_set ( + add_set_cmd ("com2base", class_obscure, var_zinteger, + (char *) &ports[1].base, + "Set COM2 base i/o port address.", + &setlist), + &showlist); + + add_show_from_set ( + add_set_cmd ("com2irq", class_obscure, var_zinteger, + (char *) &ports[1].irq, + "Set COM2 interrupt request.", + &setlist), + &showlist); + + add_show_from_set ( + add_set_cmd ("com3base", class_obscure, var_zinteger, + (char *) &ports[2].base, + "Set COM3 base i/o port address.", + &setlist), + &showlist); + + add_show_from_set ( + add_set_cmd ("com3irq", class_obscure, var_zinteger, + (char *) &ports[2].irq, + "Set COM3 interrupt request.", + &setlist), + &showlist); + + add_show_from_set ( + add_set_cmd ("com4base", class_obscure, var_zinteger, + (char *) &ports[3].base, + "Set COM4 base i/o port address.", + &setlist), + &showlist); + + add_show_from_set ( + add_set_cmd ("com4irq", class_obscure, var_zinteger, + (char *) &ports[3].irq, + "Set COM4 interrupt request.", + &setlist), + &showlist); + + add_info ("serial", dos_info, + "Print DOS serial port status."); } -- 2.7.4