From 76f1dfb687150e852aa74573962cfc158a9570cc Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Wed, 3 May 2017 14:18:26 +0200 Subject: [PATCH] arm64: dts: hi6220: Move board data from the dwmmc nodes to hikey dts Move the board specific descriptions for the dwmmc nodes in the hi6220 SoC dtsi, into the hikey dts as it's there these belongs. While changing this, let's take the opportunity to drop the use of the "ti,non-removable" binding for one of the dwmmc device nodes, as it's not a valid binding and not used. Drop also the unnecessary use of "num-slots = <0x1>" for all of the dwmmc nodes, as there is no need to set this since when default number of slots is one. Signed-off-by: Ulf Hansson Acked-by: Daniel Lezcano Acked-by: Arnd Bergmann --- arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 23 ++++++++++++++++++++++- arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 19 ------------------- 2 files changed, 22 insertions(+), 20 deletions(-) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index 802f4a4..5132d8e 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -286,8 +286,29 @@ /* GPIO blocks 16 thru 19 do not appear to be routed to pins */ + dwmmc_0: dwmmc0@f723d000 { + cap-mmc-highspeed; + non-removable; + bus-width = <0x8>; + vmmc-supply = <&ldo19>; + }; + + dwmmc_1: dwmmc1@f723e000 { + card-detect-delay = <200>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + vqmmc-supply = <&ldo7>; + vmmc-supply = <&ldo10>; + bus-width = <0x4>; + disable-wp; + cd-gpios = <&gpio1 0 1>; + }; + dwmmc_2: dwmmc2@f723f000 { - ti,non-removable; + broken-cd; + bus-width = <0x4>; non-removable; /* WL_EN */ vmmc-supply = <&wlan_en_reg>; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 951152d..5013e4b 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -756,17 +756,12 @@ dwmmc_0: dwmmc0@f723d000 { compatible = "hisilicon,hi6220-dw-mshc"; - num-slots = <0x1>; - cap-mmc-highspeed; - non-removable; reg = <0x0 0xf723d000 0x0 0x1000>; interrupts = <0x0 0x48 0x4>; clocks = <&sys_ctrl 2>, <&sys_ctrl 1>; clock-names = "ciu", "biu"; resets = <&sys_ctrl PERIPH_RSTDIS0_MMC0>; reset-names = "reset"; - bus-width = <0x8>; - vmmc-supply = <&ldo19>; pinctrl-names = "default"; pinctrl-0 = <&emmc_pmx_func &emmc_clk_cfg_func &emmc_cfg_func &emmc_rst_cfg_func>; @@ -774,13 +769,7 @@ dwmmc_1: dwmmc1@f723e000 { compatible = "hisilicon,hi6220-dw-mshc"; - num-slots = <0x1>; - card-detect-delay = <200>; hisilicon,peripheral-syscon = <&ao_ctrl>; - cap-sd-highspeed; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; reg = <0x0 0xf723e000 0x0 0x1000>; interrupts = <0x0 0x49 0x4>; #address-cells = <0x1>; @@ -789,11 +778,6 @@ clock-names = "ciu", "biu"; resets = <&sys_ctrl PERIPH_RSTDIS0_MMC1>; reset-names = "reset"; - vqmmc-supply = <&ldo7>; - vmmc-supply = <&ldo10>; - bus-width = <0x4>; - disable-wp; - cd-gpios = <&gpio1 0 1>; pinctrl-names = "default", "idle"; pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>; pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>; @@ -801,15 +785,12 @@ dwmmc_2: dwmmc2@f723f000 { compatible = "hisilicon,hi6220-dw-mshc"; - num-slots = <0x1>; reg = <0x0 0xf723f000 0x0 0x1000>; interrupts = <0x0 0x4a 0x4>; clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>; clock-names = "ciu", "biu"; resets = <&sys_ctrl PERIPH_RSTDIS0_MMC2>; reset-names = "reset"; - bus-width = <0x4>; - broken-cd; pinctrl-names = "default", "idle"; pinctrl-0 = <&sdio_pmx_func &sdio_clk_cfg_func &sdio_cfg_func>; pinctrl-1 = <&sdio_pmx_idle &sdio_clk_cfg_idle &sdio_cfg_idle>; -- 2.7.4