From 76ee875c2f48c57cbafa35d9c3b34e7202a45a83 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Sun, 11 Nov 2018 22:45:38 +0100 Subject: [PATCH] power: reset: gpio-poweroff: add ability to specific active and inactive delays Similar to gpio-reset allow to specify active and inactive delays while keeping the 100ms defaults that were used previously all the time. The dt-properties are named the same as in gpio-reset but get an "-ms" suffix as properties should contain such a suffix specifying its unit. Signed-off-by: Heiko Stuebner Reviewed-by: Rob Herring Reviewed-by: Moritz Fischer Signed-off-by: Sebastian Reichel --- .../devicetree/bindings/power/reset/gpio-poweroff.txt | 2 ++ drivers/power/reset/gpio-poweroff.c | 10 ++++++++-- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt index 6d8980c..3e56c1b 100644 --- a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt +++ b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt @@ -27,6 +27,8 @@ Optional properties: it to an output when the power-off handler is called. If this optional property is not specified, the GPIO is initialized as an output in its inactive state. +- active-delay-ms: Delay (default 100) to wait after driving gpio active +- inactive-delay-ms: Delay (default 100) to wait after driving gpio inactive - timeout-ms: Time to wait before asserting a WARN_ON(1). If nothing is specified, 3000 ms is used. diff --git a/drivers/power/reset/gpio-poweroff.c b/drivers/power/reset/gpio-poweroff.c index 38206c3..52525b6 100644 --- a/drivers/power/reset/gpio-poweroff.c +++ b/drivers/power/reset/gpio-poweroff.c @@ -26,6 +26,8 @@ */ static struct gpio_desc *reset_gpio; static u32 timeout = DEFAULT_TIMEOUT_MS; +static u32 active_delay = 100; +static u32 inactive_delay = 100; static void gpio_poweroff_do_poweroff(void) { @@ -33,10 +35,11 @@ static void gpio_poweroff_do_poweroff(void) /* drive it active, also inactive->active edge */ gpiod_direction_output(reset_gpio, 1); - mdelay(100); + mdelay(active_delay); + /* drive inactive, also active->inactive edge */ gpiod_set_value_cansleep(reset_gpio, 0); - mdelay(100); + mdelay(inactive_delay); /* drive it active, also inactive->active edge */ gpiod_set_value_cansleep(reset_gpio, 1); @@ -66,6 +69,9 @@ static int gpio_poweroff_probe(struct platform_device *pdev) else flags = GPIOD_OUT_LOW; + device_property_read_u32(&pdev->dev, "active-delay-ms", &active_delay); + device_property_read_u32(&pdev->dev, "inactive-delay-ms", + &inactive_delay); device_property_read_u32(&pdev->dev, "timeout-ms", &timeout); reset_gpio = devm_gpiod_get(&pdev->dev, NULL, flags); -- 2.7.4