From 75e65cc72ecf816ea89ab180c9c129299548a612 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Thu, 10 Sep 2020 20:21:14 -0600 Subject: [PATCH] Kconfig: Move boot timing under boot options This relates to booting, so move it under the boot menu. Signed-off-by: Simon Glass --- common/Kconfig | 291 ---------------------------------------------------- common/Kconfig.boot | 291 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 291 insertions(+), 291 deletions(-) diff --git a/common/Kconfig b/common/Kconfig index f234240..826a9d5 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -1,296 +1,5 @@ source "common/Kconfig.boot" -menu "Boot timing" - -config BOOTSTAGE - bool "Boot timing and reporting" - help - Enable recording of boot time while booting. To use it, insert - calls to bootstage_mark() with a suitable BOOTSTAGE_ID from - bootstage.h. Only a single entry is recorded for each ID. You can - give the entry a name with bootstage_mark_name(). You can also - record elapsed time in a particular stage using bootstage_start() - before starting and bootstage_accum() when finished. Bootstage will - add up all the accumulated time and report it. - - Normally, IDs are defined in bootstage.h but a small number of - additional 'user' IDs can be used by passing BOOTSTAGE_ID_ALLOC - as the ID. - - Calls to show_boot_progress() will also result in log entries but - these will not have names. - -config SPL_BOOTSTAGE - bool "Boot timing and reported in SPL" - depends on BOOTSTAGE - help - Enable recording of boot time in SPL. To make this visible to U-Boot - proper, enable BOOTSTAGE_STASH as well. This will stash the timing - information when SPL finishes and load it when U-Boot proper starts - up. - -config TPL_BOOTSTAGE - bool "Boot timing and reported in TPL" - depends on BOOTSTAGE - help - Enable recording of boot time in SPL. To make this visible to U-Boot - proper, enable BOOTSTAGE_STASH as well. This will stash the timing - information when TPL finishes and load it when U-Boot proper starts - up. - -config BOOTSTAGE_REPORT - bool "Display a detailed boot timing report before booting the OS" - depends on BOOTSTAGE - help - Enable output of a boot time report just before the OS is booted. - This shows how long it took U-Boot to go through each stage of the - boot process. The report looks something like this: - - Timer summary in microseconds: - Mark Elapsed Stage - 0 0 reset - 3,575,678 3,575,678 board_init_f start - 3,575,695 17 arch_cpu_init A9 - 3,575,777 82 arch_cpu_init done - 3,659,598 83,821 board_init_r start - 3,910,375 250,777 main_loop - 29,916,167 26,005,792 bootm_start - 30,361,327 445,160 start_kernel - -config BOOTSTAGE_RECORD_COUNT - int "Number of boot stage records to store" - default 30 - help - This is the size of the bootstage record list and is the maximum - number of bootstage records that can be recorded. - -config SPL_BOOTSTAGE_RECORD_COUNT - int "Number of boot stage records to store for SPL" - default 5 - help - This is the size of the bootstage record list and is the maximum - number of bootstage records that can be recorded. - -config TPL_BOOTSTAGE_RECORD_COUNT - int "Number of boot stage records to store for TPL" - default 5 - help - This is the size of the bootstage record list and is the maximum - number of bootstage records that can be recorded. - -config BOOTSTAGE_FDT - bool "Store boot timing information in the OS device tree" - depends on BOOTSTAGE - help - Stash the bootstage information in the FDT. A root 'bootstage' - node is created with each bootstage id as a child. Each child - has a 'name' property and either 'mark' containing the - mark time in microseconds, or 'accum' containing the - accumulated time for that bootstage id in microseconds. - For example: - - bootstage { - 154 { - name = "board_init_f"; - mark = <3575678>; - }; - 170 { - name = "lcd"; - accum = <33482>; - }; - }; - - Code in the Linux kernel can find this in /proc/devicetree. - -config BOOTSTAGE_STASH - bool "Stash the boot timing information in memory before booting OS" - depends on BOOTSTAGE - help - Some OSes do not support device tree. Bootstage can instead write - the boot timing information in a binary format at a given address. - This happens through a call to bootstage_stash(), typically in - the CPU's cleanup_before_linux() function. You can use the - 'bootstage stash' and 'bootstage unstash' commands to do this on - the command line. - -config BOOTSTAGE_STASH_ADDR - hex "Address to stash boot timing information" - default 0 - help - Provide an address which will not be overwritten by the OS when it - starts, so that it can read this information when ready. - -config BOOTSTAGE_STASH_SIZE - hex "Size of boot timing stash region" - default 0x1000 - help - This should be large enough to hold the bootstage stash. A value of - 4096 (4KiB) is normally plenty. - -config SHOW_BOOT_PROGRESS - bool "Show boot progress in a board-specific manner" - help - Defining this option allows to add some board-specific code (calling - a user-provided function show_boot_progress(int) that enables you to - show the system's boot progress on some display (for example, some - LEDs) on your board. At the moment, the following checkpoints are - implemented: - - Legacy uImage format: - - Arg Where When - 1 common/cmd_bootm.c before attempting to boot an image - -1 common/cmd_bootm.c Image header has bad magic number - 2 common/cmd_bootm.c Image header has correct magic number - -2 common/cmd_bootm.c Image header has bad checksum - 3 common/cmd_bootm.c Image header has correct checksum - -3 common/cmd_bootm.c Image data has bad checksum - 4 common/cmd_bootm.c Image data has correct checksum - -4 common/cmd_bootm.c Image is for unsupported architecture - 5 common/cmd_bootm.c Architecture check OK - -5 common/cmd_bootm.c Wrong Image Type (not kernel, multi) - 6 common/cmd_bootm.c Image Type check OK - -6 common/cmd_bootm.c gunzip uncompression error - -7 common/cmd_bootm.c Unimplemented compression type - 7 common/cmd_bootm.c Uncompression OK - 8 common/cmd_bootm.c No uncompress/copy overwrite error - -9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX) - - 9 common/image.c Start initial ramdisk verification - -10 common/image.c Ramdisk header has bad magic number - -11 common/image.c Ramdisk header has bad checksum - 10 common/image.c Ramdisk header is OK - -12 common/image.c Ramdisk data has bad checksum - 11 common/image.c Ramdisk data has correct checksum - 12 common/image.c Ramdisk verification complete, start loading - -13 common/image.c Wrong Image Type (not PPC Linux ramdisk) - 13 common/image.c Start multifile image verification - 14 common/image.c No initial ramdisk, no multifile, continue. - - 15 arch//lib/bootm.c All preparation done, transferring control to OS - - -30 arch/powerpc/lib/board.c Fatal error, hang the system - -31 post/post.c POST test failed, detected by post_output_backlog() - -32 post/post.c POST test failed, detected by post_run_single() - - 34 common/cmd_doc.c before loading a Image from a DOC device - -35 common/cmd_doc.c Bad usage of "doc" command - 35 common/cmd_doc.c correct usage of "doc" command - -36 common/cmd_doc.c No boot device - 36 common/cmd_doc.c correct boot device - -37 common/cmd_doc.c Unknown Chip ID on boot device - 37 common/cmd_doc.c correct chip ID found, device available - -38 common/cmd_doc.c Read Error on boot device - 38 common/cmd_doc.c reading Image header from DOC device OK - -39 common/cmd_doc.c Image header has bad magic number - 39 common/cmd_doc.c Image header has correct magic number - -40 common/cmd_doc.c Error reading Image from DOC device - 40 common/cmd_doc.c Image header has correct magic number - 41 common/cmd_ide.c before loading a Image from a IDE device - -42 common/cmd_ide.c Bad usage of "ide" command - 42 common/cmd_ide.c correct usage of "ide" command - -43 common/cmd_ide.c No boot device - 43 common/cmd_ide.c boot device found - -44 common/cmd_ide.c Device not available - 44 common/cmd_ide.c Device available - -45 common/cmd_ide.c wrong partition selected - 45 common/cmd_ide.c partition selected - -46 common/cmd_ide.c Unknown partition table - 46 common/cmd_ide.c valid partition table found - -47 common/cmd_ide.c Invalid partition type - 47 common/cmd_ide.c correct partition type - -48 common/cmd_ide.c Error reading Image Header on boot device - 48 common/cmd_ide.c reading Image Header from IDE device OK - -49 common/cmd_ide.c Image header has bad magic number - 49 common/cmd_ide.c Image header has correct magic number - -50 common/cmd_ide.c Image header has bad checksum - 50 common/cmd_ide.c Image header has correct checksum - -51 common/cmd_ide.c Error reading Image from IDE device - 51 common/cmd_ide.c reading Image from IDE device OK - 52 common/cmd_nand.c before loading a Image from a NAND device - -53 common/cmd_nand.c Bad usage of "nand" command - 53 common/cmd_nand.c correct usage of "nand" command - -54 common/cmd_nand.c No boot device - 54 common/cmd_nand.c boot device found - -55 common/cmd_nand.c Unknown Chip ID on boot device - 55 common/cmd_nand.c correct chip ID found, device available - -56 common/cmd_nand.c Error reading Image Header on boot device - 56 common/cmd_nand.c reading Image Header from NAND device OK - -57 common/cmd_nand.c Image header has bad magic number - 57 common/cmd_nand.c Image header has correct magic number - -58 common/cmd_nand.c Error reading Image from NAND device - 58 common/cmd_nand.c reading Image from NAND device OK - - -60 common/env_common.c Environment has a bad CRC, using default - - 64 net/eth.c starting with Ethernet configuration. - -64 net/eth.c no Ethernet found. - 65 net/eth.c Ethernet found. - - -80 common/cmd_net.c usage wrong - 80 common/cmd_net.c before calling net_loop() - -81 common/cmd_net.c some error in net_loop() occurred - 81 common/cmd_net.c net_loop() back without error - -82 common/cmd_net.c size == 0 (File with size 0 loaded) - 82 common/cmd_net.c trying automatic boot - 83 common/cmd_net.c running "source" command - -83 common/cmd_net.c some error in automatic boot or "source" command - 84 common/cmd_net.c end without errors - - FIT uImage format: - - Arg Where When - 100 common/cmd_bootm.c Kernel FIT Image has correct format - -100 common/cmd_bootm.c Kernel FIT Image has incorrect format - 101 common/cmd_bootm.c No Kernel subimage unit name, using configuration - -101 common/cmd_bootm.c Can't get configuration for kernel subimage - 102 common/cmd_bootm.c Kernel unit name specified - -103 common/cmd_bootm.c Can't get kernel subimage node offset - 103 common/cmd_bootm.c Found configuration node - 104 common/cmd_bootm.c Got kernel subimage node offset - -104 common/cmd_bootm.c Kernel subimage hash verification failed - 105 common/cmd_bootm.c Kernel subimage hash verification OK - -105 common/cmd_bootm.c Kernel subimage is for unsupported architecture - 106 common/cmd_bootm.c Architecture check OK - -106 common/cmd_bootm.c Kernel subimage has wrong type - 107 common/cmd_bootm.c Kernel subimage type OK - -107 common/cmd_bootm.c Can't get kernel subimage data/size - 108 common/cmd_bootm.c Got kernel subimage data/size - -108 common/cmd_bootm.c Wrong image type (not legacy, FIT) - -109 common/cmd_bootm.c Can't get kernel subimage type - -110 common/cmd_bootm.c Can't get kernel subimage comp - -111 common/cmd_bootm.c Can't get kernel subimage os - -112 common/cmd_bootm.c Can't get kernel subimage load address - -113 common/cmd_bootm.c Image uncompress/copy overwrite error - - 120 common/image.c Start initial ramdisk verification - -120 common/image.c Ramdisk FIT image has incorrect format - 121 common/image.c Ramdisk FIT image has correct format - 122 common/image.c No ramdisk subimage unit name, using configuration - -122 common/image.c Can't get configuration for ramdisk subimage - 123 common/image.c Ramdisk unit name specified - -124 common/image.c Can't get ramdisk subimage node offset - 125 common/image.c Got ramdisk subimage node offset - -125 common/image.c Ramdisk subimage hash verification failed - 126 common/image.c Ramdisk subimage hash verification OK - -126 common/image.c Ramdisk subimage for unsupported architecture - 127 common/image.c Architecture check OK - -127 common/image.c Can't get ramdisk subimage data/size - 128 common/image.c Got ramdisk subimage data/size - 129 common/image.c Can't get ramdisk load address - -129 common/image.c Got ramdisk load address - - -130 common/cmd_doc.c Incorrect FIT image format - 131 common/cmd_doc.c FIT image format OK - - -140 common/cmd_ide.c Incorrect FIT image format - 141 common/cmd_ide.c FIT image format OK - - -150 common/cmd_nand.c Incorrect FIT image format - 151 common/cmd_nand.c FIT image format OK - -endmenu - menu "Boot media" config NOR_BOOT diff --git a/common/Kconfig.boot b/common/Kconfig.boot index 6f9b26e..3937320 100644 --- a/common/Kconfig.boot +++ b/common/Kconfig.boot @@ -337,4 +337,295 @@ config ARCH_FIXUP_FDT_MEMORY endmenu # Boot images +menu "Boot timing" + +config BOOTSTAGE + bool "Boot timing and reporting" + help + Enable recording of boot time while booting. To use it, insert + calls to bootstage_mark() with a suitable BOOTSTAGE_ID from + bootstage.h. Only a single entry is recorded for each ID. You can + give the entry a name with bootstage_mark_name(). You can also + record elapsed time in a particular stage using bootstage_start() + before starting and bootstage_accum() when finished. Bootstage will + add up all the accumulated time and report it. + + Normally, IDs are defined in bootstage.h but a small number of + additional 'user' IDs can be used by passing BOOTSTAGE_ID_ALLOC + as the ID. + + Calls to show_boot_progress() will also result in log entries but + these will not have names. + +config SPL_BOOTSTAGE + bool "Boot timing and reported in SPL" + depends on BOOTSTAGE + help + Enable recording of boot time in SPL. To make this visible to U-Boot + proper, enable BOOTSTAGE_STASH as well. This will stash the timing + information when SPL finishes and load it when U-Boot proper starts + up. + +config TPL_BOOTSTAGE + bool "Boot timing and reported in TPL" + depends on BOOTSTAGE + help + Enable recording of boot time in SPL. To make this visible to U-Boot + proper, enable BOOTSTAGE_STASH as well. This will stash the timing + information when TPL finishes and load it when U-Boot proper starts + up. + +config BOOTSTAGE_REPORT + bool "Display a detailed boot timing report before booting the OS" + depends on BOOTSTAGE + help + Enable output of a boot time report just before the OS is booted. + This shows how long it took U-Boot to go through each stage of the + boot process. The report looks something like this: + + Timer summary in microseconds: + Mark Elapsed Stage + 0 0 reset + 3,575,678 3,575,678 board_init_f start + 3,575,695 17 arch_cpu_init A9 + 3,575,777 82 arch_cpu_init done + 3,659,598 83,821 board_init_r start + 3,910,375 250,777 main_loop + 29,916,167 26,005,792 bootm_start + 30,361,327 445,160 start_kernel + +config BOOTSTAGE_RECORD_COUNT + int "Number of boot stage records to store" + default 30 + help + This is the size of the bootstage record list and is the maximum + number of bootstage records that can be recorded. + +config SPL_BOOTSTAGE_RECORD_COUNT + int "Number of boot stage records to store for SPL" + default 5 + help + This is the size of the bootstage record list and is the maximum + number of bootstage records that can be recorded. + +config TPL_BOOTSTAGE_RECORD_COUNT + int "Number of boot stage records to store for TPL" + default 5 + help + This is the size of the bootstage record list and is the maximum + number of bootstage records that can be recorded. + +config BOOTSTAGE_FDT + bool "Store boot timing information in the OS device tree" + depends on BOOTSTAGE + help + Stash the bootstage information in the FDT. A root 'bootstage' + node is created with each bootstage id as a child. Each child + has a 'name' property and either 'mark' containing the + mark time in microseconds, or 'accum' containing the + accumulated time for that bootstage id in microseconds. + For example: + + bootstage { + 154 { + name = "board_init_f"; + mark = <3575678>; + }; + 170 { + name = "lcd"; + accum = <33482>; + }; + }; + + Code in the Linux kernel can find this in /proc/devicetree. + +config BOOTSTAGE_STASH + bool "Stash the boot timing information in memory before booting OS" + depends on BOOTSTAGE + help + Some OSes do not support device tree. Bootstage can instead write + the boot timing information in a binary format at a given address. + This happens through a call to bootstage_stash(), typically in + the CPU's cleanup_before_linux() function. You can use the + 'bootstage stash' and 'bootstage unstash' commands to do this on + the command line. + +config BOOTSTAGE_STASH_ADDR + hex "Address to stash boot timing information" + default 0 + help + Provide an address which will not be overwritten by the OS when it + starts, so that it can read this information when ready. + +config BOOTSTAGE_STASH_SIZE + hex "Size of boot timing stash region" + default 0x1000 + help + This should be large enough to hold the bootstage stash. A value of + 4096 (4KiB) is normally plenty. + +config SHOW_BOOT_PROGRESS + bool "Show boot progress in a board-specific manner" + help + Defining this option allows to add some board-specific code (calling + a user-provided function show_boot_progress(int) that enables you to + show the system's boot progress on some display (for example, some + LEDs) on your board. At the moment, the following checkpoints are + implemented: + + Legacy uImage format: + + Arg Where When + 1 common/cmd_bootm.c before attempting to boot an image + -1 common/cmd_bootm.c Image header has bad magic number + 2 common/cmd_bootm.c Image header has correct magic number + -2 common/cmd_bootm.c Image header has bad checksum + 3 common/cmd_bootm.c Image header has correct checksum + -3 common/cmd_bootm.c Image data has bad checksum + 4 common/cmd_bootm.c Image data has correct checksum + -4 common/cmd_bootm.c Image is for unsupported architecture + 5 common/cmd_bootm.c Architecture check OK + -5 common/cmd_bootm.c Wrong Image Type (not kernel, multi) + 6 common/cmd_bootm.c Image Type check OK + -6 common/cmd_bootm.c gunzip uncompression error + -7 common/cmd_bootm.c Unimplemented compression type + 7 common/cmd_bootm.c Uncompression OK + 8 common/cmd_bootm.c No uncompress/copy overwrite error + -9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX) + + 9 common/image.c Start initial ramdisk verification + -10 common/image.c Ramdisk header has bad magic number + -11 common/image.c Ramdisk header has bad checksum + 10 common/image.c Ramdisk header is OK + -12 common/image.c Ramdisk data has bad checksum + 11 common/image.c Ramdisk data has correct checksum + 12 common/image.c Ramdisk verification complete, start loading + -13 common/image.c Wrong Image Type (not PPC Linux ramdisk) + 13 common/image.c Start multifile image verification + 14 common/image.c No initial ramdisk, no multifile, continue. + + 15 arch//lib/bootm.c All preparation done, transferring control to OS + + -30 arch/powerpc/lib/board.c Fatal error, hang the system + -31 post/post.c POST test failed, detected by post_output_backlog() + -32 post/post.c POST test failed, detected by post_run_single() + + 34 common/cmd_doc.c before loading a Image from a DOC device + -35 common/cmd_doc.c Bad usage of "doc" command + 35 common/cmd_doc.c correct usage of "doc" command + -36 common/cmd_doc.c No boot device + 36 common/cmd_doc.c correct boot device + -37 common/cmd_doc.c Unknown Chip ID on boot device + 37 common/cmd_doc.c correct chip ID found, device available + -38 common/cmd_doc.c Read Error on boot device + 38 common/cmd_doc.c reading Image header from DOC device OK + -39 common/cmd_doc.c Image header has bad magic number + 39 common/cmd_doc.c Image header has correct magic number + -40 common/cmd_doc.c Error reading Image from DOC device + 40 common/cmd_doc.c Image header has correct magic number + 41 common/cmd_ide.c before loading a Image from a IDE device + -42 common/cmd_ide.c Bad usage of "ide" command + 42 common/cmd_ide.c correct usage of "ide" command + -43 common/cmd_ide.c No boot device + 43 common/cmd_ide.c boot device found + -44 common/cmd_ide.c Device not available + 44 common/cmd_ide.c Device available + -45 common/cmd_ide.c wrong partition selected + 45 common/cmd_ide.c partition selected + -46 common/cmd_ide.c Unknown partition table + 46 common/cmd_ide.c valid partition table found + -47 common/cmd_ide.c Invalid partition type + 47 common/cmd_ide.c correct partition type + -48 common/cmd_ide.c Error reading Image Header on boot device + 48 common/cmd_ide.c reading Image Header from IDE device OK + -49 common/cmd_ide.c Image header has bad magic number + 49 common/cmd_ide.c Image header has correct magic number + -50 common/cmd_ide.c Image header has bad checksum + 50 common/cmd_ide.c Image header has correct checksum + -51 common/cmd_ide.c Error reading Image from IDE device + 51 common/cmd_ide.c reading Image from IDE device OK + 52 common/cmd_nand.c before loading a Image from a NAND device + -53 common/cmd_nand.c Bad usage of "nand" command + 53 common/cmd_nand.c correct usage of "nand" command + -54 common/cmd_nand.c No boot device + 54 common/cmd_nand.c boot device found + -55 common/cmd_nand.c Unknown Chip ID on boot device + 55 common/cmd_nand.c correct chip ID found, device available + -56 common/cmd_nand.c Error reading Image Header on boot device + 56 common/cmd_nand.c reading Image Header from NAND device OK + -57 common/cmd_nand.c Image header has bad magic number + 57 common/cmd_nand.c Image header has correct magic number + -58 common/cmd_nand.c Error reading Image from NAND device + 58 common/cmd_nand.c reading Image from NAND device OK + + -60 common/env_common.c Environment has a bad CRC, using default + + 64 net/eth.c starting with Ethernet configuration. + -64 net/eth.c no Ethernet found. + 65 net/eth.c Ethernet found. + + -80 common/cmd_net.c usage wrong + 80 common/cmd_net.c before calling net_loop() + -81 common/cmd_net.c some error in net_loop() occurred + 81 common/cmd_net.c net_loop() back without error + -82 common/cmd_net.c size == 0 (File with size 0 loaded) + 82 common/cmd_net.c trying automatic boot + 83 common/cmd_net.c running "source" command + -83 common/cmd_net.c some error in automatic boot or "source" command + 84 common/cmd_net.c end without errors + + FIT uImage format: + + Arg Where When + 100 common/cmd_bootm.c Kernel FIT Image has correct format + -100 common/cmd_bootm.c Kernel FIT Image has incorrect format + 101 common/cmd_bootm.c No Kernel subimage unit name, using configuration + -101 common/cmd_bootm.c Can't get configuration for kernel subimage + 102 common/cmd_bootm.c Kernel unit name specified + -103 common/cmd_bootm.c Can't get kernel subimage node offset + 103 common/cmd_bootm.c Found configuration node + 104 common/cmd_bootm.c Got kernel subimage node offset + -104 common/cmd_bootm.c Kernel subimage hash verification failed + 105 common/cmd_bootm.c Kernel subimage hash verification OK + -105 common/cmd_bootm.c Kernel subimage is for unsupported architecture + 106 common/cmd_bootm.c Architecture check OK + -106 common/cmd_bootm.c Kernel subimage has wrong type + 107 common/cmd_bootm.c Kernel subimage type OK + -107 common/cmd_bootm.c Can't get kernel subimage data/size + 108 common/cmd_bootm.c Got kernel subimage data/size + -108 common/cmd_bootm.c Wrong image type (not legacy, FIT) + -109 common/cmd_bootm.c Can't get kernel subimage type + -110 common/cmd_bootm.c Can't get kernel subimage comp + -111 common/cmd_bootm.c Can't get kernel subimage os + -112 common/cmd_bootm.c Can't get kernel subimage load address + -113 common/cmd_bootm.c Image uncompress/copy overwrite error + + 120 common/image.c Start initial ramdisk verification + -120 common/image.c Ramdisk FIT image has incorrect format + 121 common/image.c Ramdisk FIT image has correct format + 122 common/image.c No ramdisk subimage unit name, using configuration + -122 common/image.c Can't get configuration for ramdisk subimage + 123 common/image.c Ramdisk unit name specified + -124 common/image.c Can't get ramdisk subimage node offset + 125 common/image.c Got ramdisk subimage node offset + -125 common/image.c Ramdisk subimage hash verification failed + 126 common/image.c Ramdisk subimage hash verification OK + -126 common/image.c Ramdisk subimage for unsupported architecture + 127 common/image.c Architecture check OK + -127 common/image.c Can't get ramdisk subimage data/size + 128 common/image.c Got ramdisk subimage data/size + 129 common/image.c Can't get ramdisk load address + -129 common/image.c Got ramdisk load address + + -130 common/cmd_doc.c Incorrect FIT image format + 131 common/cmd_doc.c FIT image format OK + + -140 common/cmd_ide.c Incorrect FIT image format + 141 common/cmd_ide.c FIT image format OK + + -150 common/cmd_nand.c Incorrect FIT image format + 151 common/cmd_nand.c FIT image format OK + +endmenu + endmenu # Booting -- 2.7.4