From 7557b5d63259d55f716e62e528978d4866318515 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Wed, 16 Sep 2009 17:29:59 +0900 Subject: [PATCH] PCI ASPM: support L1 only The definition of the ASPM support field in the Link Capabilities Register had been changed by the "ASPM optionality ECN" as follows: 00b Reserved 01b L0s Supported 10b Reserved 11b L0s and L1 Supported 00b No ASPM Support 01b L0s Supported 10b L1 Supported 11b L0s and L1 Supported Current linux ASPM driver doesn't enable ASPM if the support field is 00b or 10b. So there is no impact about 00b. But current linux ASPM driver doesn't enable L1 if the support field is 10b. With this patch, 10b (L1 support) is handled properly. Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aspm.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index f289ca9..745402e 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -303,9 +303,6 @@ static void pcie_get_aspm_reg(struct pci_dev *pdev, pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); pci_read_config_dword(pdev, pos + PCI_EXP_LNKCAP, ®32); info->support = (reg32 & PCI_EXP_LNKCAP_ASPMS) >> 10; - /* 00b and 10b are defined as "Reserved". */ - if (info->support == PCIE_LINK_STATE_L1) - info->support = 0; info->latency_encoding_l0s = (reg32 & PCI_EXP_LNKCAP_L0SEL) >> 12; info->latency_encoding_l1 = (reg32 & PCI_EXP_LNKCAP_L1EL) >> 15; pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16); -- 2.7.4