From 7544b3ff745b0b8fde5f41f381a273287b373f13 Mon Sep 17 00:00:00 2001 From: "Russell King (Oracle)" Date: Thu, 17 Feb 2022 18:30:56 +0000 Subject: [PATCH] net: dsa: qca8k: move pcs configuration Move the PCS configuration to qca8k_pcs_config(). Signed-off-by: Russell King (Oracle) Signed-off-by: David S. Miller --- drivers/net/dsa/qca8k.c | 150 +++++++++++++++++++++++++++--------------------- 1 file changed, 84 insertions(+), 66 deletions(-) diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c index 4df7b55..2f8b03f 100644 --- a/drivers/net/dsa/qca8k.c +++ b/drivers/net/dsa/qca8k.c @@ -1706,8 +1706,8 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, const struct phylink_link_state *state) { struct qca8k_priv *priv = ds->priv; - int cpu_port_index, ret; - u32 reg, val; + int cpu_port_index; + u32 reg; switch (port) { case 0: /* 1st CPU port */ @@ -1773,70 +1773,6 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, case PHY_INTERFACE_MODE_1000BASEX: /* Enable SGMII on the port */ qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN); - - /* Enable/disable SerDes auto-negotiation as necessary */ - ret = qca8k_read(priv, QCA8K_REG_PWS, &val); - if (ret) - return; - if (phylink_autoneg_inband(mode)) - val &= ~QCA8K_PWS_SERDES_AEN_DIS; - else - val |= QCA8K_PWS_SERDES_AEN_DIS; - qca8k_write(priv, QCA8K_REG_PWS, val); - - /* Configure the SGMII parameters */ - ret = qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val); - if (ret) - return; - - val |= QCA8K_SGMII_EN_SD; - - if (priv->ports_config.sgmii_enable_pll) - val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX | - QCA8K_SGMII_EN_TX; - - if (dsa_is_cpu_port(ds, port)) { - /* CPU port, we're talking to the CPU MAC, be a PHY */ - val &= ~QCA8K_SGMII_MODE_CTRL_MASK; - val |= QCA8K_SGMII_MODE_CTRL_PHY; - } else if (state->interface == PHY_INTERFACE_MODE_SGMII) { - val &= ~QCA8K_SGMII_MODE_CTRL_MASK; - val |= QCA8K_SGMII_MODE_CTRL_MAC; - } else if (state->interface == PHY_INTERFACE_MODE_1000BASEX) { - val &= ~QCA8K_SGMII_MODE_CTRL_MASK; - val |= QCA8K_SGMII_MODE_CTRL_BASEX; - } - - qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val); - - /* From original code is reported port instability as SGMII also - * require delay set. Apply advised values here or take them from DT. - */ - if (state->interface == PHY_INTERFACE_MODE_SGMII) - qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg); - - /* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and - * falling edge is set writing in the PORT0 PAD reg - */ - if (priv->switch_id == QCA8K_ID_QCA8327 || - priv->switch_id == QCA8K_ID_QCA8337) - reg = QCA8K_REG_PORT0_PAD_CTRL; - - val = 0; - - /* SGMII Clock phase configuration */ - if (priv->ports_config.sgmii_rx_clk_falling_edge) - val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE; - - if (priv->ports_config.sgmii_tx_clk_falling_edge) - val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE; - - if (val) - ret = qca8k_rmw(priv, reg, - QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE | - QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE, - val); - break; default: dev_err(ds->dev, "xMII mode %s not supported for port %d\n", @@ -1981,6 +1917,88 @@ static int qca8k_pcs_config(struct phylink_pcs *pcs, unsigned int mode, const unsigned long *advertising, bool permit_pause_to_mac) { + struct qca8k_priv *priv = pcs_to_qca8k_pcs(pcs)->priv; + int cpu_port_index, ret, port; + u32 reg, val; + + port = pcs_to_qca8k_pcs(pcs)->port; + switch (port) { + case 0: + reg = QCA8K_REG_PORT0_PAD_CTRL; + cpu_port_index = QCA8K_CPU_PORT0; + break; + + case 6: + reg = QCA8K_REG_PORT6_PAD_CTRL; + cpu_port_index = QCA8K_CPU_PORT6; + break; + + default: + WARN_ON(1); + } + + /* Enable/disable SerDes auto-negotiation as necessary */ + ret = qca8k_read(priv, QCA8K_REG_PWS, &val); + if (ret) + return ret; + if (phylink_autoneg_inband(mode)) + val &= ~QCA8K_PWS_SERDES_AEN_DIS; + else + val |= QCA8K_PWS_SERDES_AEN_DIS; + qca8k_write(priv, QCA8K_REG_PWS, val); + + /* Configure the SGMII parameters */ + ret = qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val); + if (ret) + return ret; + + val |= QCA8K_SGMII_EN_SD; + + if (priv->ports_config.sgmii_enable_pll) + val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX | + QCA8K_SGMII_EN_TX; + + if (dsa_is_cpu_port(priv->ds, port)) { + /* CPU port, we're talking to the CPU MAC, be a PHY */ + val &= ~QCA8K_SGMII_MODE_CTRL_MASK; + val |= QCA8K_SGMII_MODE_CTRL_PHY; + } else if (interface == PHY_INTERFACE_MODE_SGMII) { + val &= ~QCA8K_SGMII_MODE_CTRL_MASK; + val |= QCA8K_SGMII_MODE_CTRL_MAC; + } else if (interface == PHY_INTERFACE_MODE_1000BASEX) { + val &= ~QCA8K_SGMII_MODE_CTRL_MASK; + val |= QCA8K_SGMII_MODE_CTRL_BASEX; + } + + qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val); + + /* From original code is reported port instability as SGMII also + * require delay set. Apply advised values here or take them from DT. + */ + if (interface == PHY_INTERFACE_MODE_SGMII) + qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg); + /* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and + * falling edge is set writing in the PORT0 PAD reg + */ + if (priv->switch_id == QCA8K_ID_QCA8327 || + priv->switch_id == QCA8K_ID_QCA8337) + reg = QCA8K_REG_PORT0_PAD_CTRL; + + val = 0; + + /* SGMII Clock phase configuration */ + if (priv->ports_config.sgmii_rx_clk_falling_edge) + val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE; + + if (priv->ports_config.sgmii_tx_clk_falling_edge) + val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE; + + if (val) + ret = qca8k_rmw(priv, reg, + QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE | + QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE, + val); + return 0; } -- 2.7.4