From 751d0017334db9c4d68a8909c59f662a6ecbcec6 Mon Sep 17 00:00:00 2001 From: David Engraf Date: Wed, 11 Dec 2019 17:29:54 +0100 Subject: [PATCH] tty/serial: atmel: fix out of range clock divider handling Use MCK_DIV8 when the clock divider is > 65535. Unfortunately the mode register was already written thus the clock selection is ignored. Fix by writing the mode register after calculating the baudrate. Signed-off-by: David Engraf Link: https://lore.kernel.org/r/20191211162954.8393-1-david.engraf@sysgo.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/atmel_serial.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index a8dc8af..9983e2f 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -2270,9 +2270,6 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, mode |= ATMEL_US_USMODE_NORMAL; } - /* set the mode, clock divisor, parity, stop bits and data size */ - atmel_uart_writel(port, ATMEL_US_MR, mode); - /* * when switching the mode, set the RTS line state according to the * new mode, otherwise keep the former state @@ -2315,6 +2312,9 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, } quot = cd | fp << ATMEL_US_FP_OFFSET; + /* set the mode, clock divisor, parity, stop bits and data size */ + atmel_uart_writel(port, ATMEL_US_MR, mode); + if (!(port->iso7816.flags & SER_ISO7816_ENABLED)) atmel_uart_writel(port, ATMEL_US_BRGR, quot); atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); -- 2.7.4