From 74a55245fe2627450cdcdf86486c689f88708e08 Mon Sep 17 00:00:00 2001 From: Boram Park Date: Tue, 21 Aug 2012 18:03:58 +0900 Subject: [PATCH] upload tizen2.0 source --- autogen.sh | 12 - debian/README.source | 73 ----- debian/changelog | 165 ----------- debian/compat | 1 - debian/control | 67 ----- debian/copyright | 24 -- debian/gbp.conf | 4 - debian/libxdamage-dev.install | 4 - debian/libxdamage1.install | 1 - debian/libxdamage1.shlibs | 1 - debian/rules | 103 ------- debian/watch | 2 - debian/xsfbs/repack.sh | 32 --- debian/xsfbs/xsfbs.mk | 276 ------------------- debian/xsfbs/xsfbs.sh | 622 ------------------------------------------ packaging/libXdamage.spec | 62 +++++ packaging/libxdamage.spec | 72 ----- 17 files changed, 62 insertions(+), 1459 deletions(-) delete mode 100755 autogen.sh delete mode 100644 debian/README.source delete mode 100755 debian/changelog delete mode 100644 debian/compat delete mode 100755 debian/control delete mode 100644 debian/copyright delete mode 100644 debian/gbp.conf delete mode 100755 debian/libxdamage-dev.install delete mode 100644 debian/libxdamage1.install delete mode 100644 debian/libxdamage1.shlibs delete mode 100755 debian/rules delete mode 100644 debian/watch delete mode 100644 debian/xsfbs/repack.sh delete mode 100644 debian/xsfbs/xsfbs.mk delete mode 100644 debian/xsfbs/xsfbs.sh create mode 100644 packaging/libXdamage.spec delete mode 100644 packaging/libxdamage.spec diff --git a/autogen.sh b/autogen.sh deleted file mode 100755 index 218197d..0000000 --- a/autogen.sh +++ /dev/null @@ -1,12 +0,0 @@ -#! /bin/sh - -srcdir=`dirname $0` -test -z "$srcdir" && srcdir=. - -ORIGDIR=`pwd` -cd $srcdir - -autoreconf -v --install || exit 1 -cd $ORIGDIR || exit $? - -#$srcdir/configure --enable-maintainer-mode "$@" diff --git a/debian/README.source b/debian/README.source deleted file mode 100644 index 34ab4bf..0000000 --- a/debian/README.source +++ /dev/null @@ -1,73 +0,0 @@ ------------------------------------------------------- -Quick Guide To Patching This Package For The Impatient ------------------------------------------------------- - -1. Make sure you have quilt installed -2. Unpack the package as usual with "dpkg-source -x" -3. Run the "patch" target in debian/rules -4. Create a new patch with "quilt new" (see quilt(1)) -5. Edit all the files you want to include in the patch with "quilt edit" - (see quilt(1)). -6. Write the patch with "quilt refresh" (see quilt(1)) -7. Run the "clean" target in debian/rules - -Alternatively, instead of using quilt directly, you can drop the patch in to -debian/patches and add the name of the patch to debian/patches/series. - ------------------------------------- -Guide To The X Strike Force Packages ------------------------------------- - -The X Strike Force team maintains X packages in git repositories on -git.debian.org in the pkg-xorg subdirectory. Most upstream packages -are actually maintained in git repositories as well, so they often -just need to be pulled into git.debian.org in a "upstream-*" branch. -Otherwise, the upstream sources are manually installed in the Debian -git repository. - -The .orig.tar.gz upstream source file could be generated this -"upstream-*" branch in the Debian git repository but it is actually -copied from upstream tarballs directly. - -Due to X.org being highly modular, packaging all X.org applications -as their own independent packages would have created too many Debian -packages. For this reason, some X.org applications have been grouped -into larger packages: xutils, xutils-dev, x11-apps, x11-session-utils, -x11-utils, x11-xfs-utils, x11-xkb-utils, x11-xserver-utils. -Most packages, including the X.org server itself and all libraries -and drivers are, however maintained independently. - -The Debian packaging is added by creating the "debian-*" git branch -which contains the aforementioned "upstream-*" branch plus the debian/ -repository files. -When a patch has to be applied to the Debian package, two solutions -are involved: -* If the patch is available in one of the upstream branches, it - may be git'cherry-picked into the Debian repository. In this - case, it appears directly in the .diff.gz. -* Otherwise, the patch is added to debian/patches/ which is managed - with quilt as documented in /usr/share/doc/quilt/README.source. - -quilt is actually invoked by the Debian X packaging through a larger -set of scripts called XSFBS. XSFBS brings some other X specific -features such as managing dependencies and conflicts due to the video -and input driver ABIs. -XSFBS itself is maintained in a separate repository at - git://git.debian.org/pkg-xorg/xsfbs.git -and it is pulled inside the other Debian X repositories when needed. - -The XSFBS patching system requires a build dependency on quilt. Also -a dependency on $(STAMP_DIR)/patch has to be added to debian/rules -so that the XSFBS patching occurs before the actual build. So the -very first target of the build (likely the one running autoreconf) -should depend on $(STAMP_DIR)/patch. It should also not depend on -anything so that parallel builds are correctly supported (nothing -should probably run while patching is being done). And finally, the -clean target should depend on the xsfclean target so that patches -are unapplied on clean. - -When the upstream sources contain some DFSG-nonfree files, they are -listed in text files in debian/prune/ in the "debian-*" branch of -the Debian repository. XSFBS' scripts then take care of removing -these listed files during the build so as to generate a modified -DFSG-free .orig.tar.gz tarball. diff --git a/debian/changelog b/debian/changelog deleted file mode 100755 index 02e4a18..0000000 --- a/debian/changelog +++ /dev/null @@ -1,165 +0,0 @@ -libxdamage (1:1.1.3-2slp2) unstable; urgency=low - - * [X11R7.6] upgrade package - * Git: 65.213.180.234:slp/pkgs/xorg/lib/libxdamage - * Tag: libxdamage_1.1.3-2slp2 - - -- SooChan Lim Tue, 04 Jan 2011 10:54:05 +0900 - -libxdamage (1:1.1.3-1) unstable; urgency=low - - [ Julien Cristau ] - * Remove myself from Uploaders. - * Rename the build directory to not include DEB_BUILD_GNU_TYPE for no - good reason. Thanks, Colin Watson! - * New upstream release. - * Bump xutils-dev build-dep for newer macros. - - [ Brice Goglin ] - * Remove Jamey Sharp and Josh Triplett from Uploaders, closes: #568279. - - -- Julien Cristau Fri, 18 Jun 2010 14:18:01 +0100 - -libxdamage (1:1.1.2-1) unstable; urgency=low - - [ Brice Goglin ] - * Add a link to www.X.org in the long description. - * Drop CVS header from debian/copyright. - * Add upstream URL to debian/copyright. - * Add README.source, bump Standards-Version to 3.8.2. - * Use updated xsfbs, closes: #538586. - * Move -dbg package to section debug. - - [ Timo Aaltonen ] - * New upstream release (closes: #554235). - * Run autoreconf on build. Add build-deps on automake, libtool - and xutils-dev. - * Parse space-separated DEB_BUILD_OPTIONS, and handle parallel=N. - * Drop pre-dependency on x11-common from libxdamage-dev. This was needed - for upgrades from sarge. - - [ Julien Cristau ] - * Bump Standards-Version to 3.8.3 (no changes). - - -- Julien Cristau Wed, 25 Nov 2009 15:43:49 +0100 - -libxdamage (1:1.1.1-4) unstable; urgency=low - - * Remove Branden from Uploaders with his permission. - * Drop the -1 debian revision from the libx11-dev build-dep. - * Bump Standards-Version to 3.7.3. - * Drop the XS- prefix from Vcs-* control fields. - * libxdamage1{,-dbg} don't need to depend on x11-common. - * Use ${binary:Version} instead of the deprecated ${Source-Version}. - * Add myself to Uploaders. - - -- Julien Cristau Sun, 18 May 2008 11:32:52 +0200 - -libxdamage (1:1.1.1-3) unstable; urgency=low - - * Add XS-Vcs-Browser. - * Remove Fabio from Uploaders, with his permission. - * Upload to unstable. - * Fix the shlibs file: it's libXdamage, not libxdamage... - - -- Julien Cristau Fri, 20 Apr 2007 22:37:32 +0200 - -libxdamage (1:1.1.1-2) experimental; urgency=low - - * Bump shlibs to libxdamage >= 1:1.1. - - -- Julien Cristau Wed, 21 Mar 2007 12:50:56 +0100 - -libxdamage (1:1.1.1-1) experimental; urgency=low - - [ Julien Cristau ] - * Adjust Section values to what the override says. - * Update location of upstream repository from CVS to git in the long - descriptions. - * New upstream release. - + Drop patch applied upstream. - + Bump (build-)dependency on x11proto-damage-dev to >= 1.1. - * Install upstream changelog. - * Add XS-Vcs-Git header in debian/control. - - [ Drew Parsons ] - * New upstream release 1.1.1. - - -- Drew Parsons Wed, 21 Mar 2007 21:11:50 +1100 - -libxdamage (1:1.0.3-3) unstable; urgency=low - - * calls UnlockDisplay and SyncHandle when it shouldn't (Closes: - #400445) - * Add Josh and myself to Uploaders. - * Enable xsfbs patch application. - * Add quilt to Build-Depends. - - -- Jamey Sharp Mon, 27 Nov 2006 16:07:41 -0800 - -libxdamage (1:1.0.3-2) unstable; urgency=low - - * Bring X11R7.1 into unstable. - * dbg package has priority extra. - * exclude libXdamage.la from dh_install - - -- Drew Parsons Sat, 26 Aug 2006 19:02:10 +1000 - -libxdamage (1:1.0.3-1) experimental; urgency=low - - * New upstream version for X11R7.1. - - -- Drew Parsons Sat, 5 Aug 2006 23:47:28 +1000 - -libxdamage (1:1.0.2.2-4) UNRELEASED; urgency=low - - * Test for obj-$(DEB_BUILD_GNU_TYPE) before creating it during build; - idempotency fix. - * Run dh_install w/ --list-missing. - * Drop duplicate x11-common dep in -dev package. - * Bump standards version to 3.7.2.0. - * Version x11-common pre-dep in -dev package to 1:7.0.0 to match - the rest of Debian. - * Bump debhelper compat to 5. - * Fix dh_strip call to skip the -dbg package. - - -- Andres Salomon Mon, 17 Jul 2006 01:20:50 -0400 - -libxdamage (1:1.0.2.2-3) unstable; urgency=low - - * Reorder makeshlib command in rules file so that ldconfig is run - properly. Thanks Drew Parsons and Steve Langasek. - - -- David Nusinow Tue, 18 Apr 2006 21:49:57 -0400 - -libxdamage (1:1.0.2.2-2) unstable; urgency=low - - * Upload to unstable - - -- David Nusinow Thu, 23 Mar 2006 22:44:33 -0500 - -libxdamage (1:1.0.2.2-1) experimental; urgency=low - - * First upload to Debian - - -- David Nusinow Thu, 29 Dec 2005 20:51:33 -0500 - -libxdamage (1:1.0.1-3) breezy; urgency=low - - * Bump Build-Depends on libx11-dev and libxfixes-dev high enough to avoid - the unfortunate _XOPEN_SOURCE braindamage -- er, I mean love. - - -- Daniel Stone Fri, 22 Jul 2005 23:43:05 +1000 - -libxdamage (1:1.0.1-2) breezy; urgency=low - - * Fix src/Makefile.am to have the right soversion and reupload. THANKYOU - LIBTOOL. YOU MAKE WAKING UP IN THE MORNINGS WORTHWHILE. - - -- Daniel Stone Tue, 19 Jul 2005 10:12:05 +1000 - -libxdamage (1:1.0.1-1) breezy; urgency=low - - * First libxdamage release. - - -- Daniel Stone Mon, 16 May 2005 22:10:17 +1000 diff --git a/debian/compat b/debian/compat deleted file mode 100644 index 7ed6ff8..0000000 --- a/debian/compat +++ /dev/null @@ -1 +0,0 @@ -5 diff --git a/debian/control b/debian/control deleted file mode 100755 index 5c356b4..0000000 --- a/debian/control +++ /dev/null @@ -1,67 +0,0 @@ -Source: libxdamage -Section: x11 -Priority: optional -Maintainer: SooChan Lim , Sangjin Lee , Debian X Strike Force -Uploaders: SooChan Lim , David Nusinow , Drew Parsons -Build-Depends: debhelper (>= 5.0.0), libx11-dev (>= 1:0.99.2), libxfixes-dev (>= 1:3.0.0-4), x11proto-damage-dev (>= 1.1), pkg-config, quilt, automake, libtool, xutils-dev (>= 1:7.5-1slp2+1), -Standards-Version: 3.8.3 -Vcs-Git: git://git.debian.org/git/pkg-xorg/lib/libxdamage -Vcs-Browser: http://git.debian.org/?p=pkg-xorg/lib/libxdamage.git - -Package: libxdamage1 -Section: libs -Architecture: any -Depends: ${shlibs:Depends}, ${misc:Depends}, x11-common -Description: X11 damaged region extension library - libXdamage provides an X Window System client interface to the DAMAGE - extension to the X protocol. - . - The Damage extension provides for notification of when on-screen regions have - been 'damaged' (altered). - . - More information about X.Org can be found at: - - . - This module can be found at - git://anongit.freedesktop.org/git/xorg/lib/libXdamage - -Package: libxdamage1-dbg -Section: debug -Architecture: any -Priority: extra -Depends: ${shlibs:Depends}, ${misc:Depends}, libxdamage1 (= ${binary:Version}) -Description: X11 damaged region extension library (debug package) - libXdamage provides an X Window System client interface to the DAMAGE - extension to the X protocol. - . - The Damage extension provides for notification of when on-screen regions have - been 'damaged' (altered). - . - This package contains the debug versions of the library found in libxdamage1. - Non-developers likely have little use for this package. - . - More information about X.Org can be found at: - - . - This module can be found at - git://anongit.freedesktop.org/git/xorg/lib/libXdamage - -Package: libxdamage-dev -Section: libdevel -Architecture: any -Depends: ${shlibs:Depends}, ${misc:Depends}, libxdamage1 (= ${binary:Version}), libx11-dev, libxfixes-dev, x11proto-damage-dev (>= 1.1) -Description: X11 damaged region extension library (development headers) - libXdamage provides an X Window System client interface to the DAMAGE - extension to the X protocol. - . - The Damage extension provides for notification of when on-screen regions have - been 'damaged' (altered). - . - This package contains the development headers for the library found in - libxdamage1. Non-developers likely have little use for this package. - . - More information about X.Org can be found at: - - . - This module can be found at - git://anongit.freedesktop.org/git/xorg/lib/libXdamage diff --git a/debian/copyright b/debian/copyright deleted file mode 100644 index 3b4c586..0000000 --- a/debian/copyright +++ /dev/null @@ -1,24 +0,0 @@ -This package was downloaded from -http://xorg.freedesktop.org/releases/individual/lib/ - -Copyright © 2001,2003 Keith Packard -Copyright © 2007 Eric Anholt - -Permission to use, copy, modify, distribute, and sell this software and its -documentation for any purpose is hereby granted without fee, provided that -the above copyright notice appear in all copies and that both that -copyright notice and this permission notice appear in supporting -documentation, and that the name of Keith Packard not be used in -advertising or publicity pertaining to distribution of the software without -specific, written prior permission. Keith Packard makes no -representations about the suitability of this software for any purpose. It -is provided "as is" without express or implied warranty. - -KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, -INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO -EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR -CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, -DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER -TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR -PERFORMANCE OF THIS SOFTWARE. - diff --git a/debian/gbp.conf b/debian/gbp.conf deleted file mode 100644 index 38715f7..0000000 --- a/debian/gbp.conf +++ /dev/null @@ -1,4 +0,0 @@ -[DEFAULT] -pristine-tar = True -debian-branch = debian-unstable -upstream-branch = upstream-unstable diff --git a/debian/libxdamage-dev.install b/debian/libxdamage-dev.install deleted file mode 100755 index 70a0c01..0000000 --- a/debian/libxdamage-dev.install +++ /dev/null @@ -1,4 +0,0 @@ -usr/include/X11/* -usr/lib/libXdamage.{a,la} -usr/lib/libXdamage.so -usr/lib/pkgconfig/xdamage.pc diff --git a/debian/libxdamage1.install b/debian/libxdamage1.install deleted file mode 100644 index 05bb771..0000000 --- a/debian/libxdamage1.install +++ /dev/null @@ -1 +0,0 @@ -usr/lib/libXdamage.so.1* diff --git a/debian/libxdamage1.shlibs b/debian/libxdamage1.shlibs deleted file mode 100644 index 011fe1c..0000000 --- a/debian/libxdamage1.shlibs +++ /dev/null @@ -1 +0,0 @@ -libXdamage 1 libxdamage1 (>= 1:1.1) diff --git a/debian/rules b/debian/rules deleted file mode 100755 index c91a020..0000000 --- a/debian/rules +++ /dev/null @@ -1,103 +0,0 @@ -#!/usr/bin/make -f -# debian/rules for the Debian libxdamage package. -# Copyright © 2004 Scott James Remnant -# Copyright © 2005 Daniel Stone -# Copyright © 2005 David Nusinow - -# Uncomment this to turn on verbose mode. -#export DH_VERBOSE=1 - -# set this to the name of the main shlib's binary package -PACKAGE = libxdamage1 - -include debian/xsfbs/xsfbs.mk - -CFLAGS = -Wall -g -LDFLAGS += -Wl,--hash-style=both -Wl,--as-needed -ifneq (,$(filter noopt,$(DEB_BUILD_OPTIONS))) - CFLAGS += -O0 -else - CFLAGS += -O2 -endif -ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS))) - NUMJOBS = $(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS))) - MAKEFLAGS += -j$(NUMJOBS) -endif - -DEB_HOST_ARCH ?= $(shell dpkg-architecture -qDEB_HOST_ARCH) -DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) -DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) -ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE)) - confflags += --build=$(DEB_HOST_GNU_TYPE) -else - confflags += --build=$(DEB_BUILD_GNU_TYPE) --host=$(DEB_HOST_GNU_TYPE) -endif - -autogen: - dh_testdir - - ./autogen.sh - -#build: patch build-stamp -build: autogen build-stamp -build-stamp: - dh_testdir - test -d obj-$(DEB_BUILD_GNU_TYPE) || mkdir obj-$(DEB_BUILD_GNU_TYPE) - cd obj-$(DEB_BUILD_GNU_TYPE) && \ - ../configure --prefix=/usr CFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)" - cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE) - - touch build-stamp - -clean: xsfclean - dh_testdir - dh_testroot - rm -f build-stamp - - rm -f config.cache config.log config.status - rm -f */config.cache */config.log */config.status - rm -f conftest* */conftest* - rm -rf autom4te.cache */autom4te.cache - rm -rf obj-* - rm -f aclocal.m4 config.guess config.h.in config.sub configure - rm -f depcomp install-sh missing mkinstalldirs ltmain.sh - #rm -f ltmain.sh - find -name Makefile.in -exec rm -f {} \; - #find -name Makefile.in -delete - - dh_clean - -install: build - dh_testdir - dh_testroot - dh_clean -k - dh_installdirs - - cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install - -# Build architecture-dependent files here. -binary-arch: build install - dh_testdir - dh_testroot - -# dh_installdocs - dh_install --sourcedir=debian/tmp --list-missing --exclude=usr/share/man/man3 -# dh_installman -# dh_installchangelogs - dh_link - dh_strip --dbg-package=$(PACKAGE)-dbg - dh_compress - dh_fixperms - dh_makeshlibs - dh_shlibdeps - dh_installdeb - dh_gencontrol - dh_md5sums - dh_builddeb - -# Build architecture-independent files here. -binary-indep: build install -# Nothing to do - -binary: binary-indep binary-arch -.PHONY: build clean binary-indep binary-arch binary install diff --git a/debian/watch b/debian/watch deleted file mode 100644 index f1a50b0..0000000 --- a/debian/watch +++ /dev/null @@ -1,2 +0,0 @@ -version=3 -http://xorg.freedesktop.org/releases/individual/lib/ libXdamage-(.*)\.tar\.gz diff --git a/debian/xsfbs/repack.sh b/debian/xsfbs/repack.sh deleted file mode 100644 index 5935cc9..0000000 --- a/debian/xsfbs/repack.sh +++ /dev/null @@ -1,32 +0,0 @@ -#!/bin/sh - -set -e - -if ! [ -d debian/prune ]; then - exit 0 -fi - -if [ "x$1" != x--upstream-version ]; then - exit 1 -fi - -version="$2" -filename="$3" - -if [ -z "$version" ] || ! [ -f "$filename" ]; then - exit 1 -fi - -dir="$(pwd)" -tempdir="$(mktemp -d)" - -cd "$tempdir" -tar xf "$dir/$filename" -cat "$dir"/debian/prune/* | while read file; do rm -f */$file; done - -tar czf "$dir/$filename" * -cd "$dir" -rm -rf "$tempdir" -echo "Done pruning upstream tarball" - -exit 0 diff --git a/debian/xsfbs/xsfbs.mk b/debian/xsfbs/xsfbs.mk deleted file mode 100644 index 5e16b10..0000000 --- a/debian/xsfbs/xsfbs.mk +++ /dev/null @@ -1,276 +0,0 @@ -#!/usr/bin/make -f - -# Debian X Strike Force Build System (XSFBS): Make portion - -# Copyright 1996 Stephen Early -# Copyright 1997 Mark Eichin -# Copyright 1998-2005, 2007 Branden Robinson -# Copyright 2005 David Nusinow -# -# Licensed under the GNU General Public License, version 2. See the file -# /usr/share/common-licenses/GPL or . - -# Originally by Stephen Early -# Modified by Mark W. Eichin -# Modified by Adam Heath -# Modified by Branden Robinson -# Modified by Fabio Massimo Di Nitto -# Modified by David Nusinow -# Acknowledgements to Manoj Srivastava. - -# Pass $(DH_OPTIONS) into the environment for debhelper's benefit. -export DH_OPTIONS - -# force quilt to not use ~/.quiltrc and to use debian/patches -QUILT = QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null - -# Set up parameters for the upstream build environment. - -# Determine (source) package name from Debian changelog. -SOURCE_NAME:=$(shell dpkg-parsechangelog -ldebian/changelog \ - | grep '^Source:' | awk '{print $$2}') - -# Determine package version from Debian changelog. -SOURCE_VERSION:=$(shell dpkg-parsechangelog -ldebian/changelog \ - | grep '^Version:' | awk '{print $$2}') - -# Determine upstream version number. -UPSTREAM_VERSION:=$(shell echo $(SOURCE_VERSION) | sed 's/-.*//') - -# Determine the source version without the epoch for make-orig-tar-gz -NO_EPOCH_VER:=$(shell echo $(UPSTREAM_VERSION) | sed 's/^.://') - -# Figure out who's building this package. -BUILDER:=$(shell echo $${DEBEMAIL:-$${EMAIL:-$$(echo $$LOGNAME@$$(cat /etc/mailname 2>/dev/null))}}) - -# Find out if this is an official build; an official build has nothing but -# digits, dots, and/or the codename of a release in the Debian part of the -# version number. Anything else indicates an unofficial build. -OFFICIAL_BUILD:=$(shell VERSION=$(SOURCE_VERSION); if ! expr "$$(echo $${VERSION\#\#*-} | sed 's/\(woody\|sarge\|etch\|lenny\)//g')" : ".*[^0-9.].*" >/dev/null 2>&1; then echo yes; fi) - -# Set up parameters for the Debian build environment. - -# Determine our architecture. -BUILD_ARCH:=$(shell dpkg-architecture -qDEB_BUILD_ARCH) -# Work around some old-time dpkg braindamage. -BUILD_ARCH:=$(subst i486,i386,$(BUILD_ARCH)) -# The DEB_HOST_ARCH variable may be set per the Debian cross-compilation policy. -ifdef DEB_HOST_ARCH - ARCH:=$(DEB_HOST_ARCH) -else - # dpkg-cross sets the ARCH environment variable; if set, use it. - ifdef ARCH - ARCH:=$(ARCH) - else - ARCH:=$(BUILD_ARCH) - endif -endif - -# $(STAMP_DIR) houses stamp files for complex targets. -STAMP_DIR:=stampdir - -# $(DEBTREEDIR) is where all install rules are told (via $(DESTDIR)) to place -# their files. -DEBTREEDIR:=$(CURDIR)/debian/tmp - -# All "important" targets have four lines: -# 1) A target name that is invoked by a package-building tool or the user. -# This consists of a dependency on a "$(STAMP_DIR)/"-prefixed counterpart. -# 2) A line delcaring 1) as a phony target (".PHONY:"). -# 3) A "$(STAMP_DIR)/"-prefixed target which does the actual work, and may -# depend on other targets. -# 4) A line declaring 3) as a member of the $(stampdir_targets) variable; the -# "$(STAMP_DIR)/" prefix is omitted. -# -# This indirection is needed so that the "stamp" files that signify when a rule -# is done can be located in a separate "stampdir". Recall that make has no way -# to know when a goal has been met for a phony target (like "build" or -# "install"). -# -# At the end of each "$(STAMP_DIR)/" target, be sure to run the command ">$@" -# so that the target will not be run again. Removing the file will make Make -# run the target over. - -# All phony targets should be declared as dependencies of .PHONY, even if they -# do not have "($STAMP_DIR)/"-prefixed counterparts. - -# Define a harmless default rule to keep things from going nuts by accident. -.PHONY: default -default: - -# Set up the $(STAMP_DIR) directory. -.PHONY: stampdir -stampdir_targets+=stampdir -stampdir: $(STAMP_DIR)/stampdir -$(STAMP_DIR)/stampdir: - mkdir $(STAMP_DIR) - >$@ - -# Set up the package build directory as quilt expects to find it. -.PHONY: prepare -stampdir_targets+=prepare -prepare: $(STAMP_DIR)/prepare -$(STAMP_DIR)/prepare: $(STAMP_DIR)/log $(STAMP_DIR)/genscripts - >$@ - -.PHONY: log -stampdir_targets+=log -log: $(STAMP_DIR)/log -$(STAMP_DIR)/log: $(STAMP_DIR)/stampdir - mkdir -p $(STAMP_DIR)/log - -# Apply all patches to the upstream source. -.PHONY: patch -stampdir_targets+=patch -patch: $(STAMP_DIR)/patch -$(STAMP_DIR)/patch: $(STAMP_DIR)/prepare - if ! [ `which quilt` ]; then \ - echo "Couldn't find quilt. Please install it or add it to the build-depends for this package."; \ - exit 1; \ - fi; \ - if $(QUILT) next >/dev/null 2>&1; then \ - echo -n "Applying patches..."; \ - if $(QUILT) push -a -v >$(STAMP_DIR)/log/patch 2>&1; then \ - cat $(STAMP_DIR)/log/patch; \ - echo "successful."; \ - else \ - cat $(STAMP_DIR)/log/patch; \ - echo "failed! (check $(STAMP_DIR)/log/patch for details)"; \ - exit 1; \ - fi; \ - else \ - echo "No patches to apply"; \ - fi; \ - >$@ - -# Revert all patches to the upstream source. -.PHONY: unpatch -unpatch: $(STAMP_DIR)/log - rm -f $(STAMP_DIR)/patch - @echo -n "Unapplying patches..."; \ - if $(QUILT) applied >/dev/null 2>/dev/null; then \ - if $(QUILT) pop -a -v >$(STAMP_DIR)/log/unpatch 2>&1; then \ - cat $(STAMP_DIR)/log/unpatch; \ - echo "successful."; \ - else \ - cat $(STAMP_DIR)/log/unpatch; \ - echo "failed! (check $(STAMP_DIR)/log/unpatch for details)"; \ - exit 1; \ - fi; \ - else \ - echo "nothing to do."; \ - fi - -# Clean the generated maintainer scripts. -.PHONY: cleanscripts -cleanscripts: - rm -f $(STAMP_DIR)/genscripts - rm -f debian/*.config \ - debian/*.postinst \ - debian/*.postrm \ - debian/*.preinst \ - debian/*.prerm - -# Clean the package build tree. -.PHONY: xsfclean -xsfclean: cleanscripts unpatch - dh_testdir - rm -rf .pc - rm -rf $(STAMP_DIR) - dh_clean - -# Remove files from the upstream source tree that we don't need, or which have -# licensing problems. It must be run before creating the .orig.tar.gz. -# -# Note: This rule is for Debian package maintainers' convenience, and is not -# needed for conventional build scenarios. -.PHONY: prune-upstream-tree -prune-upstream-tree: - # Ensure we're in the correct directory. - dh_testdir - grep -rvh '^#' debian/prune/ | xargs --no-run-if-empty rm -rf - -# Verify that there are no offsets or fuzz in the patches we apply. -# -# Note: This rule is for Debian package maintainers' convenience, and is not -# needed for conventional build scenarios. -.PHONY: patch-audit -patch-audit: prepare unpatch - @echo -n "Auditing patches..."; \ - >$(STAMP_DIR)/log/patch; \ - FUZZY=; \ - while [ -n "$$($(QUILT) next)" ]; do \ - RESULT=$$($(QUILT) push -v | tee -a $(STAMP_DIR)/log/patch | grep ^Hunk | sed 's/^Hunk.*\(succeeded\|FAILED\).*/\1/');\ - case "$$RESULT" in \ - succeeded) \ - echo "fuzzy patch: $$($(QUILT) top)" \ - | tee -a $(STAMP_DIR)/log/$$($(QUILT) top); \ - FUZZY=yes; \ - ;; \ - FAILED) \ - echo "broken patch: $$($(QUILT) next)" \ - | tee -a $(STAMP_DIR)/log/$$($(QUILT) next); \ - exit 1; \ - ;; \ - esac; \ - done; \ - if [ -n "$$FUZZY" ]; then \ - echo "there were fuzzy patches; please fix."; \ - exit 1; \ - else \ - echo "done."; \ - fi - -# Generate the maintainer scripts. -.PHONY: genscripts -stampdir_targets+=genscripts -genscripts: $(STAMP_DIR)/genscripts -$(STAMP_DIR)/genscripts: $(STAMP_DIR)/stampdir - for FILE in debian/*.config.in \ - debian/*.postinst.in \ - debian/*.postrm.in \ - debian/*.preinst.in \ - debian/*.prerm.in; do \ - if [ -e "$$FILE" ]; then \ - MAINTSCRIPT=$$(echo $$FILE | sed 's/.in$$//'); \ - sed -n '1,/^#INCLUDE_SHELL_LIB#$$/p' <$$FILE \ - | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >$$MAINTSCRIPT.tmp; \ - cat debian/xsfbs/xsfbs.sh >>$$MAINTSCRIPT.tmp; \ - sed -n '/^#INCLUDE_SHELL_LIB#$$/,$$p' <$$FILE \ - | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >>$$MAINTSCRIPT.tmp; \ - sed -e 's/@SOURCE_VERSION@/$(SOURCE_VERSION)/' \ - -e 's/@OFFICIAL_BUILD@/$(OFFICIAL_BUILD)/' \ - <$$MAINTSCRIPT.tmp >$$MAINTSCRIPT; \ - rm $$MAINTSCRIPT.tmp; \ - fi; \ - done - # Validate syntax of generated shell scripts. - #sh debian/scripts/validate-posix-sh debian/*.config \ - # debian/*.postinst \ - # debian/*.postrm \ - # debian/*.preinst \ - # debian/*.prerm - >$@ - -SERVERMINVERS = $(shell cat /usr/share/xserver-xorg/serverminver 2>/dev/null) -VIDEOABI = $(shell cat /usr/share/xserver-xorg/videoabiver 2>/dev/null) -INPUTABI = $(shell cat /usr/share/xserver-xorg/inputabiver 2>/dev/null) -SERVER_DEPENDS = xserver-xorg-core (>= $(SERVERMINVERS)) -VIDDRIVER_PROVIDES = xserver-xorg-video-$(VIDEOABI) -INPDRIVER_PROVIDES = xserver-xorg-input-$(INPUTABI) -ifeq ($(PACKAGE),) -PACKAGE=$(shell awk '/^Package:/ { print $$2; exit }' < debian/control) -endif - -.PHONY: serverabi -serverabi: install -ifeq ($(SERVERMINVERS),) - @echo error: xserver-xorg-dev needs to be installed - @exit 1 -else - echo "xserver:Depends=$(SERVER_DEPENDS)" >> debian/$(PACKAGE).substvars - echo "xviddriver:Provides=$(VIDDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars - echo "xinpdriver:Provides=$(INPDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars -endif - -# vim:set noet ai sts=8 sw=8 tw=0: diff --git a/debian/xsfbs/xsfbs.sh b/debian/xsfbs/xsfbs.sh deleted file mode 100644 index 813fd8d..0000000 --- a/debian/xsfbs/xsfbs.sh +++ /dev/null @@ -1,622 +0,0 @@ -# This is the X Strike Force shell library for X Window System package -# maintainer scripts. It serves to define shell functions commonly used by -# such packages, and performs some error checking necessary for proper operation -# of those functions. By itself, it does not "do" much; the maintainer scripts -# invoke the functions defined here to accomplish package installation and -# removal tasks. - -# If you are reading this within a Debian package maintainer script (e.g., -# /var/lib/dpkg/info/PACKAGE.{config,preinst,postinst,prerm,postrm}), you can -# skip past this library by scanning forward in this file to the string -# "GOBSTOPPER". - -SOURCE_VERSION=@SOURCE_VERSION@ -OFFICIAL_BUILD=@OFFICIAL_BUILD@ - -# Use special abnormal exit codes so that problems with this library are more -# easily tracked down. -SHELL_LIB_INTERNAL_ERROR=86 -SHELL_LIB_THROWN_ERROR=74 -SHELL_LIB_USAGE_ERROR=99 - -# old -> new variable names -if [ -z "$DEBUG_XORG_PACKAGE" ] && [ -n "$DEBUG_XFREE86_PACKAGE" ]; then - DEBUG_XORG_PACKAGE="$DEBUG_XFREE86_PACKAGE" -fi -if [ -z "$DEBUG_XORG_DEBCONF" ] && [ -n "$DEBUG_XFREE86_DEBCONF" ]; then - DEBUG_XORG_DEBCONF="$DEBUG_XFREE86_DEBCONF" -fi - -# initial sanity checks -if [ -z "$THIS_PACKAGE" ]; then - cat >&2 < on the World Wide Web for -instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the -"doc-debian" package, or install the "reportbug" package and use the command of -the same name to file a report against version $SOURCE_VERSION of this package. -EOF - exit $SHELL_LIB_USAGE_ERROR -fi - -if [ -z "$THIS_SCRIPT" ]; then - cat >&2 < on the World Wide Web for -instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the -"doc-debian" package, or install the "reportbug" package and use the command of -the same name to file a report against version $SOURCE_VERSION of the -"$THIS_PACKAGE" package. -EOF - exit $SHELL_LIB_USAGE_ERROR -fi - -if [ "$1" = "reconfigure" ] || [ -n "$DEBCONF_RECONFIGURE" ]; then - RECONFIGURE="true" -else - RECONFIGURE= -fi - -if ([ "$1" = "install" ] || [ "$1" = "configure" ]) && [ -z "$2" ]; then - FIRSTINST="yes" -fi - -if [ -z "$RECONFIGURE" ] && [ -z "$FIRSTINST" ]; then - UPGRADE="yes" -fi - -trap "message;\ - message \"Received signal. Aborting $THIS_PACKAGE package $THIS_SCRIPT script.\";\ - message;\ - exit 1" HUP INT QUIT TERM - -reject_nondigits () { - # syntax: reject_nondigits [ operand ... ] - # - # scan operands (typically shell variables whose values cannot be trusted) for - # characters other than decimal digits and barf if any are found - while [ -n "$1" ]; do - # does the operand contain anything but digits? - if ! expr "$1" : "[[:digit:]]\+$" > /dev/null 2>&1; then - # can't use die(), because it wraps message() which wraps this function - echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_nondigits() encountered" \ - "possibly malicious garbage \"$1\"" >&2 - exit $SHELL_LIB_THROWN_ERROR - fi - shift - done -} - -reject_unlikely_path_chars () { - # syntax: reject_unlikely_path_chars [ operand ... ] - # - # scan operands (typically shell variables whose values cannot be trusted) for - # characters unlikely to be seen in a path and which the shell might - # interpret and barf if any are found - while [ -n "$1" ]; do - # does the operand contain any funny characters? - if expr "$1" : '.*[!$&()*;<>?|].*' > /dev/null 2>&1; then - # can't use die(), because I want to avoid forward references - echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_unlikely_path_chars()" \ - "encountered possibly malicious garbage \"$1\"" >&2 - exit $SHELL_LIB_THROWN_ERROR - fi - shift - done -} - -# Query the terminal to establish a default number of columns to use for -# displaying messages to the user. This is used only as a fallback in the -# event the COLUMNS variable is not set. ($COLUMNS can react to SIGWINCH while -# the script is running, and this cannot, only being calculated once.) -DEFCOLUMNS=$(stty size 2> /dev/null | awk '{print $2}') || true -if ! expr "$DEFCOLUMNS" : "[[:digit:]]\+$" > /dev/null 2>&1; then - DEFCOLUMNS=80 -fi - -message () { - # pretty-print messages of arbitrary length - reject_nondigits "$COLUMNS" - echo "$*" | fmt -t -w ${COLUMNS:-$DEFCOLUMNS} >&2 -} - -observe () { - # syntax: observe message ... - # - # issue observational message suitable for logging someday when support for - # it exists in dpkg - if [ -n "$DEBUG_XORG_PACKAGE" ]; then - message "$THIS_PACKAGE $THIS_SCRIPT note: $*" - fi -} - -warn () { - # syntax: warn message ... - # - # issue warning message suitable for logging someday when support for - # it exists in dpkg; also send to standard error - message "$THIS_PACKAGE $THIS_SCRIPT warning: $*" -} - -die () { - # syntax: die message ... - # - # exit script with error message - message "$THIS_PACKAGE $THIS_SCRIPT error: $*" - exit $SHELL_LIB_THROWN_ERROR -} - -internal_error () { - # exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message - message "internal error: $*" - if [ -n "$OFFICIAL_BUILD" ]; then - message "Please report a bug in the $THIS_SCRIPT script of the" \ - "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \ - "Tracking System. Include all messages above that mention the" \ - "$THIS_PACKAGE package. Visit " \ - " on the World Wide Web for" \ - "instructions, read the file" \ - "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \ - "package, or install the reportbug package and use the command of" \ - "the same name to file a report." - fi - exit $SHELL_LIB_INTERNAL_ERROR -} - -usage_error () { - message "usage error: $*" - message "Please report a bug in the $THIS_SCRIPT script of the" \ - "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \ - "Tracking System. Include all messages above that mention the" \ - "$THIS_PACKAGE package. Visit " \ - " on the World Wide Web for" \ - "instructions, read the file" \ - "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \ - "package, or install the reportbug package and use the command of" \ - "the same name to file a report." - exit $SHELL_LIB_USAGE_ERROR -} - -font_update () { - # run $UPDATECMDS in $FONTDIRS - - local dir cmd shortcmd x_font_dir_prefix - - x_font_dir_prefix="/usr/share/fonts/X11" - - if [ -z "$UPDATECMDS" ]; then - usage_error "font_update() called but \$UPDATECMDS not set" - fi - if [ -z "$FONTDIRS" ]; then - usage_error "font_update() called but \$FONTDIRS not set" - fi - - reject_unlikely_path_chars "$UPDATECMDS" - reject_unlikely_path_chars "$FONTDIRS" - - for dir in $FONTDIRS; do - if [ -d "$x_font_dir_prefix/$dir" ]; then - for cmd in $UPDATECMDS; do - if which "$cmd" > /dev/null 2>&1; then - shortcmd=${cmd##*/} - observe "running $shortcmd in $dir font directory" - cmd_opts= - if [ "$shortcmd" = "update-fonts-alias" ]; then - cmd_opts=--x11r7-layout - fi - if [ "$shortcmd" = "update-fonts-dir" ]; then - cmd_opts=--x11r7-layout - fi - if [ "$shortcmd" = "update-fonts-scale" ]; then - cmd_opts=--x11r7-layout - fi - $cmd $cmd_opts $dir || warn "$cmd $cmd_opts $dir" \ - "failed; font directory data may not" \ - "be up to date" - else - warn "$cmd not found; not updating corresponding $dir font" \ - "directory data" - fi - done - else - warn "$dir is not a directory; not updating font directory data" - fi - done -} - -remove_conffile_prepare () { - # syntax: remove_conffile_prepare filename official_md5sum ... - # - # Check a conffile "filename" against a list of canonical MD5 checksums. - # If the file's current MD5 checksum matches one of the "official_md5sum" - # operands provided, then prepare the conffile for removal from the system. - # We defer actual deletion until the package is configured so that we can - # roll this operation back if package installation fails. - # - # Call this function from a preinst script in the event $1 is "upgrade" or - # "install" and verify $2 to ensure the package is being upgraded from a - # version (or installed over a version removed-but-not-purged) prior to the - # one in which the conffile was obsoleted. - - local conffile current_checksum - - # validate arguments - if [ $# -lt 2 ]; then - usage_error "remove_conffile_prepare() called with wrong number of" \ - "arguments; expected at least 2, got $#" - exit $SHELL_LIB_USAGE_ERROR - fi - - conffile="$1" - shift - - # does the conffile even exist? - if [ -e "$conffile" ]; then - # calculate its checksum - current_checksum=$(md5sum < "$conffile" | sed 's/[[:space:]].*//') - # compare it to each supplied checksum - while [ -n "$1" ]; do - if [ "$current_checksum" = "$1" ]; then - # we found a match; move the confffile and stop looking - observe "preparing obsolete conffile $conffile for removal" - mv "$conffile" "$conffile.$THIS_PACKAGE-tmp" - break - fi - shift - done - fi -} - -remove_conffile_lookup () { - # syntax: remove_conffile_lookup package filename - # - # Lookup the md5sum of a conffile in dpkg's database, and prepare for removal - # if it matches the actual file's md5sum. - # - # Call this function when you would call remove_conffile_prepare but only - # want to check against dpkg's status database instead of known checksums. - - local package conffile old_md5sum - - # validate arguments - if [ $# -ne 2 ]; then - usage_error "remove_conffile_lookup() called with wrong number of" \ - "arguments; expected 1, got $#" - exit $SHELL_LIB_USAGE_ERROR - fi - - package="$1" - conffile="$2" - - if ! [ -e "$conffile" ]; then - return - fi - old_md5sum="$(dpkg-query -W -f='${Conffiles}' "$package" | \ - awk '{ if (match($0, "^ '"$conffile"' ")) print $2}')" - if [ -n "$old_md5sum" ]; then - remove_conffile_prepare "$conffile" "$old_md5sum" - fi -} - -remove_conffile_commit () { - # syntax: remove_conffile_commit filename - # - # Complete the removal of a conffile "filename" that has become obsolete. - # - # Call this function from a postinst script after having used - # remove_conffile_prepare() in the preinst. - - local conffile - - # validate arguments - if [ $# -ne 1 ]; then - usage_error "remove_conffile_commit() called with wrong number of" \ - "arguments; expected 1, got $#" - exit $SHELL_LIB_USAGE_ERROR - fi - - conffile="$1" - - # if the temporary file created by remove_conffile_prepare() exists, remove it - if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then - observe "committing removal of obsolete conffile $conffile" - rm "$conffile.$THIS_PACKAGE-tmp" - fi -} - -remove_conffile_rollback () { - # syntax: remove_conffile_rollback filename - # - # Roll back the removal of a conffile "filename". - # - # Call this function from a postrm script in the event $1 is "abort-upgrade" - # or "abort-install" is after having used remove_conffile_prepare() in the - # preinst. - - local conffile - - # validate arguments - if [ $# -ne 1 ]; then - usage_error "remove_conffile_rollback() called with wrong number of" \ - "arguments; expected 1, got $#" - exit $SHELL_LIB_USAGE_ERROR - fi - - conffile="$1" - - # if the temporary file created by remove_conffile_prepare() exists, move it - # back - if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then - observe "rolling back removal of obsolete conffile $conffile" - mv "$conffile.$THIS_PACKAGE-tmp" "$conffile" - fi -} - -replace_conffile_with_symlink_prepare () { - # syntax: replace_conffile_with_symlink_prepare oldfilename newfilename \ - # official_md5sum ... - # - # Check a conffile "oldfilename" against a list of canonical MD5 checksums. - # If the file's current MD5 checksum matches one of the "official_md5sum" - # operands provided, then prepare the conffile for removal from the system. - # We defer actual deletion until the package is configured so that we can - # roll this operation back if package installation fails. Otherwise copy it - # to newfilename and let dpkg handle it through conffiles mechanism. - # - # Call this function from a preinst script in the event $1 is "upgrade" or - # "install" and verify $2 to ensure the package is being upgraded from a - # version (or installed over a version removed-but-not-purged) prior to the - # one in which the conffile was obsoleted. - - local conffile current_checksum - - # validate arguments - if [ $# -lt 3 ]; then - usage_error "replace_conffile_with_symlink_prepare() called with wrong" \ - " number of arguments; expected at least 3, got $#" - exit $SHELL_LIB_USAGE_ERROR - fi - - oldconffile="$1" - shift - newconffile="$1" - shift - - remove_conffile_prepare "$_oldconffile" "$@" - # If $oldconffile still exists, then md5sums didn't match. - # Copy it to new one. - if [ -f "$oldconffile" ]; then - cp "$oldconffile" "$newconffile" - fi - -} - -replace_conffile_with_symlink_commit () { - # syntax: replace_conffile_with_symlink_commit oldfilename - # - # Complete the removal of a conffile "oldfilename" that has been - # replaced by a symlink. - # - # Call this function from a postinst script after having used - # replace_conffile_with_symlink_prepare() in the preinst. - - local conffile - - # validate arguments - if [ $# -ne 1 ]; then - usage_error "replace_conffile_with_symlink_commit() called with wrong" \ - "number of arguments; expected 1, got $#" - exit $SHELL_LIB_USAGE_ERROR - fi - - conffile="$1" - - remove_conffile_commit "$conffile" -} - -replace_conffile_with_symlink_rollback () { - # syntax: replace_conffile_with_symlink_rollback oldfilename newfilename - # - # Roll back the replacing of a conffile "oldfilename" with symlink to - # "newfilename". - # - # Call this function from a postrm script in the event $1 is "abort-upgrade" - # or "abort-install" and verify $2 to ensure the package failed to upgrade - # from a version (or install over a version removed-but-not-purged) prior - # to the one in which the conffile was obsoleted. - # You should have used replace_conffile_with_symlink_prepare() in the - # preinst. - - local conffile - - # validate arguments - if [ $# -ne 2 ]; then - usage_error "replace_conffile_with_symlink_rollback() called with wrong" \ - "number of arguments; expected 2, got $#" - exit $SHELL_LIB_USAGE_ERROR - fi - - oldconffile="$1" - newconffile="$2" - - remove_conffile_rollback "$_oldconffile" - if [ -f "$newconffile" ]; then - rm "$newconffile" - fi -} - -run () { - # syntax: run command [ argument ... ] - # - # Run specified command with optional arguments and report its exit status. - # Useful for commands whose exit status may be nonzero, but still acceptable, - # or commands whose failure is not fatal to us. - # - # NOTE: Do *not* use this function with db_get or db_metaget commands; in - # those cases the return value of the debconf command *must* be checked - # before the string returned by debconf is used for anything. - - local retval - - # validate arguments - if [ $# -lt 1 ]; then - usage_error "run() called with wrong number of arguments; expected at" \ - "least 1, got $#" - exit $SHELL_LIB_USAGE_ERROR - fi - - "$@" || retval=$? - - if [ ${retval:-0} -ne 0 ]; then - observe "command \"$*\" exited with status $retval" - fi -} - -make_symlink_sane () { - # syntax: make_symlink_sane symlink target - # - # Ensure that the symbolic link symlink exists, and points to target. - # - # If symlink does not exist, create it and point it at target. - # - # If symlink exists but is not a symbolic link, back it up. - # - # If symlink exists, is a symbolic link, but points to the wrong location, fix - # it. - # - # If symlink exists, is a symbolic link, and already points to target, do - # nothing. - # - # This function wouldn't be needed if ln had an -I, --idempotent option. - - # Validate arguments. - if [ $# -ne 2 ]; then - usage_error "make_symlink_sane() called with wrong number of arguments;" \ - "expected 2, got $#" - exit $SHELL_LIB_USAGE_ERROR - fi - - # We could just use the positional parameters as-is, but that makes things - # harder to follow. - local symlink target - - symlink="$1" - target="$2" - - if [ -L "$symlink" ] && [ "$(readlink "$symlink")" = "$target" ]; then - observe "link from $symlink to $target already exists" - else - observe "creating symbolic link from $symlink to $target" - mkdir -p "${target%/*}" "${symlink%/*}" - ln -s -b -S ".dpkg-old" "$target" "$symlink" - fi -} - -migrate_dir_to_symlink () { - # syntax: migrate_dir_to_symlink old_location new_location - # - # Per Debian Policy section 6.5.4, "A directory will never be replaced by a - # symbolic link to a directory or vice versa; instead, the existing state - # (symlink or not) will be left alone and dpkg will follow the symlink if - # there is one." - # - # We have to do it ourselves. - # - # This function moves the contents of old_location, a directory, into - # new_location, a directory, then makes old_location a symbolic link to - # new_location. - # - # old_location need not exist, but if it does, it must be a directory (or a - # symlink to a directory). If it is not, it is backed up. If new_location - # exists already and is not a directory, it is backed up. - # - # This function should be called from a package's preinst so that other - # packages unpacked after this one --- but before this package's postinst runs - # --- are unpacked into new_location even if their payloads contain - # old_location filespecs. - - # Validate arguments. - if [ $# -ne 2 ]; then - usage_error "migrate_dir_to_symlink() called with wrong number of" - "arguments; expected 2, got $#" - exit $SHELL_LIB_USAGE_ERROR - fi - - # We could just use the positional parameters as-is, but that makes things - # harder to follow. - local new old - - old="$1" - new="$2" - - # Is old location a symlink? - if [ -L "$old" ]; then - # Does it already point to new location? - if [ "$(readlink "$old")" = "$new" ]; then - # Nothing to do; migration has already been done. - observe "migration of $old to $new already done" - return 0 - else - # Back it up. - warn "backing up symbolic link $old as $old.dpkg-old" - mv -b "$old" "$old.dpkg-old" - fi - fi - - # Does old location exist, but is not a directory? - if [ -e "$old" ] && ! [ -d "$old" ]; then - # Back it up. - warn "backing up non-directory $old as $old.dpkg-old" - mv -b "$old" "$old.dpkg-old" - fi - - observe "migrating $old to $new" - - # Is new location a symlink? - if [ -L "$new" ]; then - # Does it point the wrong way, i.e., back to where we're migrating from? - if [ "$(readlink "$new")" = "$old" ]; then - # Get rid of it. - observe "removing symbolic link $new which points to $old" - rm "$new" - else - # Back it up. - warn "backing up symbolic link $new as $new.dpkg-old" - mv -b "$new" "$new.dpkg-old" - fi - fi - - # Does new location exist, but is not a directory? - if [ -e "$new" ] && ! [ -d "$new" ]; then - warn "backing up non-directory $new as $new.dpkg-old" - mv -b "$new" "$new.dpkg-old" - fi - - # Create new directory if it does not yet exist. - if ! [ -e "$new" ]; then - observe "creating $new" - mkdir -p "$new" - fi - - # Copy files in old location to new location. Back up any filenames that - # already exist in the new location with the extension ".dpkg-old". - observe "copying files from $old to $new" - if ! (cd "$old" && cp -a -b -S ".dpkg-old" . "$new"); then - die "error(s) encountered while copying files from $old to $new" - fi - - # Remove files at old location. - observe "removing $old" - rm -r "$old" - - # Create symlink from old location to new location. - make_symlink_sane "$old" "$new" -} - -# vim:set ai et sw=2 ts=2 tw=80: - -# GOBSTOPPER: The X Strike Force shell library ends here. diff --git a/packaging/libXdamage.spec b/packaging/libXdamage.spec new file mode 100644 index 0000000..6e3c69b --- /dev/null +++ b/packaging/libXdamage.spec @@ -0,0 +1,62 @@ +Summary: X Damage extension library +Name: libXdamage +Version: 1.1.3 +Release: 3 +License: MIT +Group: System Environment/Libraries +URL: http://www.x.org + +Source0: %{name}-%{version}.tar.gz + +BuildRequires: pkgconfig(xfixes) +BuildRequires: pkgconfig(damageproto) >= 1.1.0 +BuildRequires: pkgconfig(xextproto) +BuildRequires: pkgconfig(xorg-macros) + +%description +X.Org X11 libXdamage runtime library. + +%package devel +Summary: Development files for %{name} +Group: Development/Libraries +Provides: libxdamage-devel +Requires: %{name} = %{version}-%{release} + +%description devel +X.Org X11 libXdamage development package. + +%prep +%setup -q + +%build +%reconfigure --disable-static \ + LDFLAGS="${LDFLAGS} -Wl,--hash-style=both -Wl,--as-needed" +make %{?jobs:-j%jobs} + +%install +rm -rf $RPM_BUILD_ROOT + +make install DESTDIR=$RPM_BUILD_ROOT INSTALL="install -p" + +# We intentionally don't ship *.la files +rm -f $RPM_BUILD_ROOT%{_libdir}/*.la + +%remove_docs + +%clean +rm -rf $RPM_BUILD_ROOT + +%post -p /sbin/ldconfig +%postun -p /sbin/ldconfig + +%files +%defattr(-,root,root,-) +%doc AUTHORS COPYING README ChangeLog +%{_libdir}/libXdamage.so.1 +%{_libdir}/libXdamage.so.1.1.0 + +%files devel +%defattr(-,root,root,-) +%{_includedir}/X11/extensions/Xdamage.h +%{_libdir}/libXdamage.so +%{_libdir}/pkgconfig/xdamage.pc \ No newline at end of file diff --git a/packaging/libxdamage.spec b/packaging/libxdamage.spec deleted file mode 100644 index c52697b..0000000 --- a/packaging/libxdamage.spec +++ /dev/null @@ -1,72 +0,0 @@ - -Name: libxdamage -Summary: X.Org X11 libXdamage runtime library -Version: 1.1.3 -Release: 2.3 -Group: System/Libraries -License: MIT -URL: http://www.x.org -Source0: http://xorg.freedesktop.org/releases/individual/lib/%{name}-%{version}.tar.gz -Requires(post): /sbin/ldconfig -Requires(postun): /sbin/ldconfig -BuildRequires: pkgconfig(x11) -BuildRequires: pkgconfig(damageproto) -BuildRequires: pkgconfig(xfixes) -BuildRequires: pkgconfig(xextproto) -BuildRequires: pkgconfig(xorg-macros) - -%description -Description: %{summary} - - -%package devel -Summary: X.Org X11 libXdamage development package -Group: System/Libraries -Requires: %{name} = %{version}-%{release} - -%description devel -Description: %{summary} - - -%prep -%setup -q -n %{name}-%{version} - - -%build -export LDFLAGS+=" -Wl,--hash-style=both -Wl,--as-needed" -%reconfigure --disable-static -# Call make instruction with smp support -make %{?jobs:-j%jobs} - -%install -rm -rf %{buildroot} -%make_install - - -%clean -rm -rf %{buildroot} - - - -%post -p /sbin/ldconfig - -%postun -p /sbin/ldconfig - - - -%files -%defattr(-,root,root,-) -%doc COPYING -%{_libdir}/libXdamage.so.1 -%{_libdir}/libXdamage.so.1.1.0 - - -%files devel -%defattr(-,root,root,-) -%doc AUTHORS README ChangeLog -%dir %{_includedir}/X11 -%dir %{_includedir}/X11/extensions -%{_includedir}/X11/extensions/Xdamage.h -%{_libdir}/libXdamage.so -%{_libdir}/pkgconfig/xdamage.pc - -- 2.7.4