From 70d665b1d230b9575a647948e8db3da1e6743e5c Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 15 Oct 2009 17:47:11 +0400 Subject: [PATCH] mpc85xx: Setup QE pinmux for SPI Flash on MPC8569E-MDS boards SPI Flash (M25P40) is connected to the SPI1 bus, we need a few qe_iop entries to actually enable SPI1 on these boards. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- board/freescale/mpc8569mds/mpc8569mds.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c index 2d07922..7d1d02e 100644 --- a/board/freescale/mpc8569mds/mpc8569mds.c +++ b/board/freescale/mpc8569mds/mpc8569mds.c @@ -154,6 +154,12 @@ const qe_iop_conf_t qe_iop_conf_tab[] = { {5, 10, 2, 0, 3}, /* UART1_CTS_B */ {5, 11, 1, 0, 2}, /* UART1_RTS_B */ + /* SPI Flash, M25P40 */ + {4, 27, 3, 0, 1}, /* SPI_MOSI */ + {4, 28, 3, 0, 1}, /* SPI_MISO */ + {4, 29, 3, 0, 1}, /* SPI_CLK */ + {4, 30, 1, 0, 0}, /* SPI_SEL, GPIO */ + {0, 0, 0, 0, QE_IOP_TAB_END} /* END of table */ }; -- 2.7.4