From 70850643f37d1b74f47affd0174101bf1f7fd2a8 Mon Sep 17 00:00:00 2001 From: Yong Bakos Date: Tue, 5 Apr 2016 18:24:01 -0500 Subject: [PATCH] protocol: Correct grammar and spelling Fix grammar, spelling, tense, and other inconsistencies, based on correctness, consistency, and precedence both here and influenced by wayland-protocols. - Standardize lower case for summary attribute values. - Minor vertical whitespace removal consistency. - Standarize references to coordinates, preferring 'surface local' - Fix spelling, grammar, tense, and punctuation. Signed-off-by: Yong Bakos --- protocol/wayland.xml | 181 +++++++++++++++++++++++++-------------------------- 1 file changed, 89 insertions(+), 92 deletions(-) diff --git a/protocol/wayland.xml b/protocol/wayland.xml index 12a6efd..164ec03 100644 --- a/protocol/wayland.xml +++ b/protocol/wayland.xml @@ -67,7 +67,7 @@ where the error occurred, most often in response to a request to that object. The code identifies the error and is defined by the object interface. As such, each interface defines its - own set of error codes. The message is an brief description + own set of error codes. The message is a brief description of the error, for (debugging) convenience. @@ -93,7 +93,7 @@ This event is used internally by the object ID management logic. When a client deletes an object, the server will send this event to acknowledge that it has seen the delete request. - When the client receive this event, it will know that it can + When the client receives this event, it will know that it can safely reuse the object ID. @@ -214,8 +214,8 @@ Create a wl_buffer object from the pool. The buffer is created offset bytes into the pool and has - width and height as specified. The stride arguments specifies - the number of bytes from beginning of one row to the beginning + width and height as specified. The stride argument specifies + the number of bytes from the beginning of one row to the beginning of the next. The format is the pixel format of the buffer and must be one of those advertised through the wl_shm.format event. @@ -392,13 +392,13 @@ Sent when this wl_buffer is no longer used by the compositor. - The client is now free to re-use or destroy this buffer and its + The client is now free to reuse or destroy this buffer and its backing storage. If a client receives a release event before the frame callback requested in the same wl_surface.commit that attaches this wl_buffer to a surface, then the client is immediately free to - re-use the buffer and its backing storage, and does not need a + reuse the buffer and its backing storage, and does not need a second buffer for the next surface content update. Typically this is possible, when the compositor maintains a copy of the wl_surface contents, e.g. as a GL texture. This is an important @@ -464,7 +464,7 @@ EOF and then closes its end, at which point the transfer is complete. - This request may happen multiple times for different mimetypes, + This request may happen multiple times for different mime types, both before and after wl_data_device.drop. Drag-and-drop destination clients may preemptively fetch data or examine it more closely to determine acceptance. @@ -511,7 +511,7 @@ Sets the actions that the destination side client supports for this operation. This request may trigger the emission of wl_data_source.action and wl_data_offer.action events if the compositor - need to change the selected action. + needs to change the selected action. This request can be called multiple times throughout the drag-and-drop operation, typically in response to wl_data_device.enter @@ -585,7 +585,7 @@ compositor shall no longer be able to induce a different action. Upon "ask" actions, it is expected that the drag-and-drop destination - may potentially choose different a different action and/or mime type, + may potentially choose a different action and/or mime type, based on wl_data_offer.source_actions and finally chosen by the user (e.g. popping up a menu with the available options). The final wl_data_offer.set_actions and wl_data_offer.accept requests @@ -654,7 +654,7 @@ - The data source has been replaced by another data source. - The drag-and-drop operation was performed, but the drop destination - did not accept any of the mimetypes offered through + did not accept any of the mime types offered through wl_data_source.target. - The drag-and-drop operation was performed, but the drop destination did not select any of the actions present in the mask offered through @@ -697,7 +697,7 @@ The user performed the drop action. This event does not indicate acceptance, wl_data_source.cancelled may still be emitted afterwards - if the drop destination does not accept any mimetype. + if the drop destination does not accept any mime type. However, this event might however not be received if the compositor cancelled the drag-and-drop operation before this event could happen. @@ -860,7 +860,7 @@ - + The event is sent when a drag-and-drop operation is ended because the implicit grab is removed. @@ -946,7 +946,7 @@ (source actions ∩ destination actions). In addition, compositors may also pick different actions in - reaction to key modifiers being pressed, one common design that + reaction to key modifiers being pressed. One common design that is used in major toolkits (and the behavior recommended for compositors) is: @@ -994,7 +994,6 @@ - An interface that may be implemented by a wl_surface, for implementations that provide a desktop-style user interface. @@ -1004,7 +1003,7 @@ metadata like title and class, etc. On the server side the object is automatically destroyed when - the related wl_surface is destroyed. On client side, + the related wl_surface is destroyed. On the client side, wl_shell_surface_destroy() must be called before destroying the wl_surface object. @@ -1080,7 +1079,7 @@ Map the surface relative to an existing surface. - The x and y arguments specify the locations of the upper left + The x and y arguments specify the location of the upper left corner of the surface relative to the upper left corner of the parent surface, in surface local coordinates. @@ -1121,7 +1120,7 @@ The framerate parameter is used only when the method is set to "driver", to indicate the preferred framerate. A value of 0 - indicates that the app does not care about framerate. The + indicates that the client does not care about framerate. The framerate is specified in mHz, that is framerate of 60000 is 60Hz. A method of "scale" or "driver" implies a scaling operation of @@ -1159,12 +1158,12 @@ be unmapped). The popup grab continues until the window is destroyed or a - mouse button is pressed in any other clients window. A click - in any of the clients surfaces is reported as normal, however, - clicks in other clients surfaces will be discarded and trigger + mouse button is pressed in any other client's window. A click + in any of the client's surfaces is reported as normal, however, + clicks in other clients' surfaces will be discarded and trigger the callback. - The x and y arguments specify the locations of the upper left + The x and y arguments specify the location of the upper left corner of the surface relative to the upper left corner of the parent surface, in surface local coordinates. @@ -1192,7 +1191,7 @@ on the next buffer attach to this surface. A maximized surface typically fills the entire output it is - bound to, except for desktop element such as panels. This is + bound to, except for desktop elements such as panels. This is the main difference between a maximized shell surface and a fullscreen shell surface. @@ -1279,7 +1278,7 @@ local coordinates of the pixel content, in case a buffer_transform or a buffer_scale is used. - A surface without a "role" is fairly useless, a compositor does + A surface without a "role" is fairly useless: a compositor does not know where, when or how to present it. The role is the purpose of a wl_surface. Examples of roles are a cursor for a pointer (as set by wl_pointer.set_cursor), a drag icon @@ -1355,7 +1354,7 @@ any time after the wl_surface.commit request. When the compositor will not access the pixels anymore, it will send the wl_buffer.release event. Only after receiving wl_buffer.release, - the client may re-use the wl_buffer. A wl_buffer that has been + the client may reuse the wl_buffer. A wl_buffer that has been attached and then replaced by another attach instead of committed will not receive a release event, and is not used by the compositor. @@ -1394,7 +1393,7 @@ damage as it repaints the surface. Alternatively, damage can be posted with wl_surface.damage_buffer - which uses buffer co-ordinates instead of surface co-ordinates, + which uses buffer coordinates instead of surface coordinates, and is probably the preferred and intuitive way of doing this. @@ -1406,7 +1405,7 @@ - Request a notification when it is a good time start drawing a new + Request a notification when it is a good time to start drawing a new frame, by creating a frame callback. This is useful for throttling redrawing operations, and driving animations. @@ -1425,10 +1424,10 @@ will not send excessive updates, while still allowing the highest possible update rate for clients that wait for the reply before drawing again. The server should give some time for the client - to draw and commit after sending the frame callback events to let them + to draw and commit after sending the frame callback events to let it hit the next output refresh. - A server should avoid signalling the frame callbacks if the + A server should avoid signaling the frame callbacks if the surface is not visible in any way, e.g. the surface is off-screen, or completely obscured by other opaque surfaces. @@ -1449,7 +1448,7 @@ opaque content. The opaque region is an optimization hint for the compositor - that lets it optimize out redrawing of content behind opaque + that lets it optimize the redrawing of content behind opaque regions. Setting an opaque region is not required for correct behaviour, but marking transparent content as opaque will result in repaint artifacts. @@ -1465,7 +1464,7 @@ wl_surface.commit copies the pending region to the current region. Otherwise, the pending and current regions are never changed. - The initial value for opaque region is empty. Setting the pending + The initial value for an opaque region is empty. Setting the pending opaque region has copy semantics, and the wl_region object can be destroyed immediately. A NULL wl_region causes the pending opaque region to be set to empty. @@ -1493,7 +1492,7 @@ except cursor and icon surfaces are special cases, see wl_pointer.set_cursor and wl_data_device.start_drag. - The initial value for input region is infinite. That means the + The initial value for an input region is infinite. That means the whole surface will accept input. Setting the pending input region has copy semantics, and the wl_region object can be destroyed immediately. A NULL wl_region causes the input region to be set @@ -1506,13 +1505,13 @@ Surface state (input, opaque, and damage regions, attached buffers, - etc.) is double-buffered. Protocol requests modify the pending - state, as opposed to current state in use by the compositor. Commit + etc.) is double-buffered. Protocol requests modify the pending state, + as opposed to the current state in use by the compositor. A commit request atomically applies all pending state, replacing the current state. After commit, the new pending state is as documented for each related request. - On commit, a pending wl_buffer is applied first, all other state + On commit, a pending wl_buffer is applied first, and all other state second. This means that all coordinates in double-buffered state are relative to the new wl_buffer coming into use, except for wl_surface.attach itself. If there is no pending wl_buffer, the @@ -1564,7 +1563,7 @@ values are never changed. The purpose of this request is to allow clients to render content - according to the output transform, thus permiting the compositor to + according to the output transform, thus permitting the compositor to use certain optimizations even if the display is rotated. Using hardware overlays and scanning out a client buffer for fullscreen surfaces are examples of such optimizations. Those optimizations are @@ -1598,9 +1597,9 @@ Otherwise, the pending and current values are never changed. The purpose of this request is to allow clients to supply higher - resolution buffer data for use on high resolution outputs. Its - intended that you pick the same buffer scale as the scale of the - output that the surface is displayed on.This means the compositor + resolution buffer data for use on high resolution outputs. It is + intended that you pick the same buffer scale as the scale of the + output that the surface is displayed on. This means the compositor can avoid scaling when rendering the surface on that output. Note that if the scale is larger than 1, then you have to attach @@ -1615,7 +1614,7 @@ - + This request is used to describe the regions where the pending buffer is different from the current surface contents, and where the surface therefore needs to be repainted. The compositor @@ -1634,14 +1633,14 @@ damage as it repaints the surface. This request differs from wl_surface.damage in only one way - it - takes damage in buffer co-ordinates instead of surface local - co-ordinates. While this generally is more intuitive than surface - co-ordinates, it is especially desirable when using wp_viewport + takes damage in buffer coordinates instead of surface local + coordinates. While this generally is more intuitive than surface + coordinates, it is especially desirable when using wp_viewport or when a drawing library (like EGL) is unaware of buffer scale and buffer transform. Note: Because buffer transformation changes and damage requests may - be interleaved in the protocol stream, It is impossible to determine + be interleaved in the protocol stream, it is impossible to determine the actual mapping between surface and buffer damage until wl_surface.commit time. Therefore, compositors wishing to take both kinds of damage into account will have to accumulate damage from the @@ -1669,9 +1668,9 @@ This is a bitmask of capabilities this seat has; if a member is set, then it is present on the seat. - - - + + + @@ -1758,7 +1757,7 @@ - Using this request client can tell the server that it is not going to + Using this request a client can tell the server that it is not going to use the seat object anymore. @@ -1818,8 +1817,8 @@ - - + + @@ -1827,15 +1826,15 @@ Notification that this seat's pointer is focused on a certain surface. - When an seat's focus enters a surface, the pointer image + When a seat's focus enters a surface, the pointer image is undefined and a client should respond to this event by setting an appropriate pointer image with the set_cursor request. - - + + @@ -1858,17 +1857,17 @@ - - + + - Describes the physical state of a button which provoked the button + Describes the physical state of a button that produced the button event. - - + + @@ -1911,7 +1910,7 @@ choose to emit scroll events where the motion vector is equivalent to a motion event vector. - When applicable, clients can transform its view relative to the + When applicable, a client can transform its content relative to the scroll distance. @@ -1924,10 +1923,10 @@ - Using this request client can tell the server that it is not going to + Using this request a client can tell the server that it is not going to use the pointer object anymore. - This request destroys the pointer proxy object, so user must not call + This request destroys the pointer proxy object, so clients must not call wl_pointer_destroy() after using this request. @@ -1952,7 +1951,7 @@ When a wl_pointer.axis and a wl_pointer.axis_stop event occur within the same frame, this indicates that axis movement in one axis has stopped but continues in the other axis. - When multiple wl_pointer.axis_stop events occur within in the same + When multiple wl_pointer.axis_stop events occur within the same frame, this indicates that these axes stopped in the same instance. A wl_pointer.frame event is sent for every logical event group, @@ -1963,7 +1962,7 @@ The wl_pointer.enter and wl_pointer.leave events are logical events generated by the compositor and not the hardware. These events are also grouped by a wl_pointer.frame. When a pointer moves from one - surface to the another, a compositor should group the + surface to another, a compositor should group the wl_pointer.leave event within the same wl_pointer.frame. However, a client must not rely on wl_pointer.leave and wl_pointer.enter being in the same wl_pointer.frame. @@ -1988,9 +1987,9 @@ the vertical motion of a device is converted to scroll events while a button is held down. - - - + + + @@ -2007,7 +2006,7 @@ If the source is wl_pointer axis_source.wheel or wl_pointer.axis_source.continuous, a wl_pointer.axis_stop event may - or may not be sent. Whether a compositor sends a axis_stop event + or may not be sent. Whether a compositor sends an axis_stop event for these sources is hardware-specific and implementation-dependent; clients must not rely on receiving an axis_stop event for these scroll sources and should treat scroll sequences from these scroll @@ -2067,7 +2066,7 @@ The discrete value carries the directional information. e.g. a value of -2 is two steps towards the negative direction of this axis. - The axis number is identical to the axis number in the associate + The axis number is identical to the axis number in the associated axis event. The order of wl_pointer.axis_discrete and wl_pointer.axis_source is @@ -2129,7 +2128,7 @@ - Describes the physical state of a key which provoked the key event. + Describes the physical state of a key that produced the key event. @@ -2207,23 +2206,23 @@ A new touch point has appeared on the surface. This touch point is - assigned a unique @id. Future events from this touchpoint reference + assigned a unique ID. Future events from this touch point reference this ID. The ID ceases to be valid after a touch up event and may be - re-used in the future. + reused in the future. - - + + The touch point has disappeared. No further events will be sent for - this touchpoint and the touch point's ID is released and may be - re-used in a future touch down event. + this touch point and the touch point's ID is released and may be + reused in a future touch down event. @@ -2232,12 +2231,12 @@ - A touchpoint has changed coordinates. + A touch point has changed coordinates. - - + + @@ -2253,7 +2252,7 @@ particular gesture. Touch cancellation applies to all touch points currently active on this client's surface. The client is responsible for finalizing the touch points, future touch points on - this surface may re-use the touch point ID. + this surface may reuse the touch point ID. @@ -2268,7 +2267,7 @@ An output describes part of the compositor geometry. The compositor works in the 'compositor coordinate system' and an - output corresponds to rectangular area in that space that is + output corresponds to a rectangular area in that space that is actually visible. This typically corresponds to a monitor that displays part of the compositor space. This object is published as global during start up, or when a monitor is hotplugged. @@ -2296,7 +2295,7 @@ The flipped values correspond to an initial flip around a vertical axis followed by rotation. - The purpose is mainly to allow clients render accordingly and + The purpose is mainly to allow clients to render accordingly and tell the compositor, so that for fullscreen surfaces, the compositor will still be able to scan out directly from client surfaces. @@ -2361,7 +2360,7 @@ the output device. This is not necessarily the same as the output size in the global compositor space. For instance, the output may be scaled, as described in wl_output.scale, - or transformed , as described in wl_output.transform. + or transformed, as described in wl_output.transform. @@ -2371,7 +2370,7 @@ - This event is sent after all other properties has been + This event is sent after all other properties have been sent after binding to the output object and after any other property changes done after that. This allows changes to the output properties to be seen as @@ -2439,7 +2438,6 @@ - @@ -2490,7 +2488,7 @@ + summary="the new subsurface object ID"/> The sub-surface interface is removed from the wl_surface object - that was turned into a sub-surface with + that was turned into a sub-surface with a wl_subcompositor.get_subsurface request. The wl_surface's association to the parent is deleted, and the wl_surface loses its role as a sub-surface. The wl_surface is unmapped. @@ -2569,7 +2567,7 @@ This schedules a sub-surface position change. - The sub-surface will be moved so, that its origin (top-left + The sub-surface will be moved so that its origin (top left corner pixel) will be at the location x, y of the parent surface coordinate system. The coordinates are not restricted to the parent surface area. Negative values are allowed. @@ -2586,8 +2584,8 @@ The initial position is 0, 0. - - + + @@ -2615,7 +2613,7 @@ - The sub-surface is placed just below of the reference surface. + The sub-surface is placed just below the reference surface. See wl_subsurface.place_above. @@ -2654,7 +2652,7 @@ If cached state exists when wl_surface.commit is called in desynchronized mode, the pending state is added to the cached - state, and applied as whole. This invalidates the cache. + state, and applied as a whole. This invalidates the cache. Note: even if a sub-surface is set to desynchronized, a parent sub-surface may override it to behave as synchronized. For details, @@ -2664,7 +2662,6 @@ the cached state is applied on set_desync. - -- 2.7.4