From 703e699dbe2cd106c406882f5c385485a1156cc9 Mon Sep 17 00:00:00 2001 From: Brian Masney Date: Tue, 25 Sep 2018 06:46:51 -0400 Subject: [PATCH] ARM: dts: qcom-msm8974: change invalid flag IRQ NONE to valid value The following commits used IRQ_TYPE_NONE since that matched what was already in the file and I do not have access to the datasheets for these devices. After these patches were submitted, commit dcf145011400 ("ARM: dts: qcom-msm8974: change invalid flag IRQ NONE to valid value") changed all of these values to IRQ_TYPE_LEVEL_HIGH. This patch corrects the IRQ type for these two commits: commit bd9392507588 ("ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for ALS / proximity") commit fe8d81fe7d9a ("ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for mpu6515") Prior to these patches, I was having issues with the bmp280 sensor returning temperature / pressure skipped errors, however these errors have gone away with these patches. Patches were tested on a LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-msm8974.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 84e1fee..a808973 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -719,7 +719,7 @@ status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; reg = <0xf9925000 0x1000>; - interrupts = <0 97 IRQ_TYPE_NONE>; + interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; #address-cells = <1>; @@ -754,7 +754,7 @@ status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; reg = <0xf9968000 0x1000>; - interrupts = <0 106 IRQ_TYPE_NONE>; + interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; #address-cells = <1>; -- 2.7.4