From 6fb861bb3caf2ca8e440f7a3fdcca35fcac917b4 Mon Sep 17 00:00:00 2001 From: Oswald Buddenhagen Date: Sat, 22 Apr 2023 15:24:30 +0200 Subject: [PATCH] ALSA: emu10k1: fix snd_emu1010_fpga_read() input masking for rev2 cards Unlike the Alice2 chips used on 1st generation E-MU cards, the Tina/Tina2 chips used on the 2nd gen cards have only six GPIN pins, which means that we need to use a smaller mask. Failure to do so would falsify the read data if the FPGA tried to raise an IRQ right at that moment. This wasn't a problem so far, as we didn't actually enable FPGA IRQs, but that's going to change soon. Signed-off-by: Oswald Buddenhagen Link: https://lore.kernel.org/r/20230422132430.1057490-1-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai --- include/sound/emu10k1.h | 3 ++- sound/pci/emu10k1/io.c | 5 ++++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h index f21441c..790dedd 100644 --- a/include/sound/emu10k1.h +++ b/include/sound/emu10k1.h @@ -252,7 +252,8 @@ #define MUSTAT_ORDYN 0x40 /* 0 = MUDATA can accept a command or data */ #define A_GPIO 0x18 /* GPIO on Audigy card (16bits) */ -#define A_GPINPUT_MASK 0xff00 +#define A_GPINPUT_MASK 0xff00 /* Alice/2 has 8 input pins */ +#define A3_GPINPUT_MASK 0x3f00 /* ... while Tina/2 has only 6 */ #define A_GPOUTPUT_MASK 0x00ff // The GPIO port is used for I/O config on Sound Blasters; diff --git a/sound/pci/emu10k1/io.c b/sound/pci/emu10k1/io.c index f013468..42b06f2 100644 --- a/sound/pci/emu10k1/io.c +++ b/sound/pci/emu10k1/io.c @@ -255,6 +255,9 @@ void snd_emu1010_fpga_write(struct snd_emu10k1 *emu, u32 reg, u32 value) void snd_emu1010_fpga_read(struct snd_emu10k1 *emu, u32 reg, u32 *value) { + // The higest input pin is used as the designated interrupt trigger, + // so it needs to be masked out. + u32 mask = emu->card_capabilities->ca0108_chip ? 0x1f : 0x7f; unsigned long flags; if (snd_BUG_ON(reg > 0x3f)) return; @@ -264,7 +267,7 @@ void snd_emu1010_fpga_read(struct snd_emu10k1 *emu, u32 reg, u32 *value) udelay(10); outw(reg | 0x80, emu->port + A_GPIO); /* High bit clocks the value into the fpga. */ udelay(10); - *value = ((inw(emu->port + A_GPIO) >> 8) & 0x7f); + *value = ((inw(emu->port + A_GPIO) >> 8) & mask); spin_unlock_irqrestore(&emu->emu_lock, flags); } -- 2.7.4