From 6f5e285839845729858b8f6ca7cf3dd35e1f9a29 Mon Sep 17 00:00:00 2001 From: ChiYuan Huang Date: Thu, 29 Jun 2023 22:29:56 +0800 Subject: [PATCH] regulator: rt5739: Add DID check and compatible for rt5733 Add compatible and use DID to check rt5733. The only difference bwtween rt5733 and rt5739 is the output range and voltage step. These two chips can be distinguished from the DIE id. Signed-off-by: ChiYuan Huang Link: https://lore.kernel.org/r/1688048996-25606-3-git-send-email-cy_huang@richtek.com Signed-off-by: Mark Brown --- drivers/regulator/rt5739.c | 36 +++++++++++++++++++++++++++++------- 1 file changed, 29 insertions(+), 7 deletions(-) diff --git a/drivers/regulator/rt5739.c b/drivers/regulator/rt5739.c index 0ce6a16..91412c9 100644 --- a/drivers/regulator/rt5739.c +++ b/drivers/regulator/rt5739.c @@ -31,10 +31,17 @@ #define RT5739_MODEVSEL1_MASK BIT(1) #define RT5739_MODEVSEL0_MASK BIT(0) #define RT5739_VID_MASK GENMASK(7, 5) +#define RT5739_DID_MASK GENMASK(3, 0) #define RT5739_ACTD_MASK BIT(7) #define RT5739_ENVSEL1_MASK BIT(1) #define RT5739_ENVSEL0_MASK BIT(0) +#define RT5733_CHIPDIE_ID 0x1 +#define RT5733_VOLT_MINUV 270000 +#define RT5733_VOLT_MAXUV 1401250 +#define RT5733_VOLT_STPUV 6250 +#define RT5733_N_VOLTS 182 + #define RT5739_VOLT_MINUV 300000 #define RT5739_VOLT_MAXUV 1300000 #define RT5739_VOLT_STPUV 5000 @@ -93,8 +100,11 @@ static int rt5739_set_suspend_voltage(struct regulator_dev *rdev, int uV) const struct regulator_desc *desc = rdev->desc; struct regmap *regmap = rdev_get_regmap(rdev); unsigned int reg, vsel; + int max_uV; + + max_uV = desc->min_uV + desc->uV_step * (desc->n_voltages - 1); - if (uV < RT5739_VOLT_MINUV || uV > RT5739_VOLT_MAXUV) + if (uV < desc->min_uV || uV > max_uV) return -EINVAL; if (desc->vsel_reg == RT5739_REG_NSEL0) @@ -102,7 +112,7 @@ static int rt5739_set_suspend_voltage(struct regulator_dev *rdev, int uV) else reg = RT5739_REG_NSEL0; - vsel = (uV - RT5739_VOLT_MINUV) / RT5739_VOLT_STPUV; + vsel = (uV - desc->min_uV) / desc->uV_step; return regmap_write(regmap, reg, vsel); } @@ -189,15 +199,12 @@ static unsigned int rt5739_of_map_mode(unsigned int mode) } static void rt5739_init_regulator_desc(struct regulator_desc *desc, - bool vsel_active_high) + bool vsel_active_high, u8 did) { /* Fixed */ desc->name = "rt5739-regulator"; desc->owner = THIS_MODULE; desc->ops = &rt5739_regulator_ops; - desc->n_voltages = RT5739_N_VOLTS; - desc->min_uV = RT5739_VOLT_MINUV; - desc->uV_step = RT5739_VOLT_STPUV; desc->vsel_mask = RT5739_VSEL_MASK; desc->enable_reg = RT5739_REG_CNTL2; desc->active_discharge_reg = RT5739_REG_CNTL1; @@ -213,6 +220,20 @@ static void rt5739_init_regulator_desc(struct regulator_desc *desc, desc->vsel_reg = RT5739_REG_NSEL0; desc->enable_mask = RT5739_ENVSEL0_MASK; } + + /* Assigned by CHIPDIE ID */ + switch (did) { + case RT5733_CHIPDIE_ID: + desc->n_voltages = RT5733_N_VOLTS; + desc->min_uV = RT5733_VOLT_MINUV; + desc->uV_step = RT5733_VOLT_STPUV; + break; + default: + desc->n_voltages = RT5739_N_VOLTS; + desc->min_uV = RT5739_VOLT_MINUV; + desc->uV_step = RT5739_VOLT_STPUV; + break; + } } static const struct regmap_config rt5739_regmap_config = { @@ -258,7 +279,7 @@ static int rt5739_probe(struct i2c_client *i2c) vsel_acth = device_property_read_bool(dev, "richtek,vsel-active-high"); - rt5739_init_regulator_desc(desc, vsel_acth); + rt5739_init_regulator_desc(desc, vsel_acth, vid & RT5739_DID_MASK); cfg.dev = dev; cfg.of_node = dev_of_node(dev); @@ -271,6 +292,7 @@ static int rt5739_probe(struct i2c_client *i2c) } static const struct of_device_id rt5739_device_table[] = { + { .compatible = "richtek,rt5733" }, { .compatible = "richtek,rt5739" }, { /* sentinel */ } }; -- 2.7.4