From 6edae708bf77e012d855a7e2c7766f211d234f4f Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Mon, 14 May 2007 20:20:27 +0900 Subject: [PATCH] [SCSI] 3w-xxxx: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe did the for_each_sg cleanup. Signed-off-by: FUJITA Tomonori Acked-by: Adam Radford Signed-off-by: James Bottomley --- drivers/scsi/3w-xxxx.c | 104 +++++++++++-------------------------------------- 1 file changed, 23 insertions(+), 81 deletions(-) diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c index 656bdb1..c7995fc 100644 --- a/drivers/scsi/3w-xxxx.c +++ b/drivers/scsi/3w-xxxx.c @@ -1273,57 +1273,24 @@ static int tw_map_scsi_sg_data(struct pci_dev *pdev, struct scsi_cmnd *cmd) int use_sg; dprintk(KERN_WARNING "3w-xxxx: tw_map_scsi_sg_data()\n"); - - if (cmd->use_sg == 0) - return 0; - use_sg = pci_map_sg(pdev, cmd->request_buffer, cmd->use_sg, DMA_BIDIRECTIONAL); - - if (use_sg == 0) { + use_sg = scsi_dma_map(cmd); + if (use_sg < 0) { printk(KERN_WARNING "3w-xxxx: tw_map_scsi_sg_data(): pci_map_sg() failed.\n"); return 0; } cmd->SCp.phase = TW_PHASE_SGLIST; cmd->SCp.have_data_in = use_sg; - + return use_sg; } /* End tw_map_scsi_sg_data() */ -static u32 tw_map_scsi_single_data(struct pci_dev *pdev, struct scsi_cmnd *cmd) -{ - dma_addr_t mapping; - - dprintk(KERN_WARNING "3w-xxxx: tw_map_scsi_single_data()\n"); - - if (cmd->request_bufflen == 0) - return 0; - - mapping = pci_map_page(pdev, virt_to_page(cmd->request_buffer), offset_in_page(cmd->request_buffer), cmd->request_bufflen, DMA_BIDIRECTIONAL); - - if (mapping == 0) { - printk(KERN_WARNING "3w-xxxx: tw_map_scsi_single_data(): pci_map_page() failed.\n"); - return 0; - } - - cmd->SCp.phase = TW_PHASE_SINGLE; - cmd->SCp.have_data_in = mapping; - - return mapping; -} /* End tw_map_scsi_single_data() */ - static void tw_unmap_scsi_data(struct pci_dev *pdev, struct scsi_cmnd *cmd) { dprintk(KERN_WARNING "3w-xxxx: tw_unmap_scsi_data()\n"); - switch(cmd->SCp.phase) { - case TW_PHASE_SINGLE: - pci_unmap_page(pdev, cmd->SCp.have_data_in, cmd->request_bufflen, DMA_BIDIRECTIONAL); - break; - case TW_PHASE_SGLIST: - pci_unmap_sg(pdev, cmd->request_buffer, cmd->use_sg, DMA_BIDIRECTIONAL); - break; - } + scsi_dma_unmap(cmd); } /* End tw_unmap_scsi_data() */ /* This function will reset a device extension */ @@ -1499,27 +1466,16 @@ static void tw_transfer_internal(TW_Device_Extension *tw_dev, int request_id, void *buf; unsigned int transfer_len; unsigned long flags = 0; + struct scatterlist *sg = scsi_sglist(cmd); - if (cmd->use_sg) { - struct scatterlist *sg = - (struct scatterlist *)cmd->request_buffer; - local_irq_save(flags); - buf = kmap_atomic(sg->page, KM_IRQ0) + sg->offset; - transfer_len = min(sg->length, len); - } else { - buf = cmd->request_buffer; - transfer_len = min(cmd->request_bufflen, len); - } + local_irq_save(flags); + buf = kmap_atomic(sg->page, KM_IRQ0) + sg->offset; + transfer_len = min(sg->length, len); memcpy(buf, data, transfer_len); - - if (cmd->use_sg) { - struct scatterlist *sg; - sg = (struct scatterlist *)cmd->request_buffer; - kunmap_atomic(buf - sg->offset, KM_IRQ0); - local_irq_restore(flags); - } + kunmap_atomic(buf - sg->offset, KM_IRQ0); + local_irq_restore(flags); } /* This function is called by the isr to complete an inquiry command */ @@ -1764,19 +1720,20 @@ static int tw_scsiop_read_write(TW_Device_Extension *tw_dev, int request_id) { TW_Command *command_packet; unsigned long command_que_value; - u32 lba = 0x0, num_sectors = 0x0, buffaddr = 0x0; + u32 lba = 0x0, num_sectors = 0x0; int i, use_sg; struct scsi_cmnd *srb; - struct scatterlist *sglist; + struct scatterlist *sglist, *sg; dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write()\n"); - if (tw_dev->srb[request_id]->request_buffer == NULL) { + srb = tw_dev->srb[request_id]; + + sglist = scsi_sglist(srb); + if (!sglist) { printk(KERN_WARNING "3w-xxxx: tw_scsiop_read_write(): Request buffer NULL.\n"); return 1; } - sglist = (struct scatterlist *)tw_dev->srb[request_id]->request_buffer; - srb = tw_dev->srb[request_id]; /* Initialize command packet */ command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id]; @@ -1819,33 +1776,18 @@ static int tw_scsiop_read_write(TW_Device_Extension *tw_dev, int request_id) command_packet->byte8.io.lba = lba; command_packet->byte6.block_count = num_sectors; - /* Do this if there are no sg list entries */ - if (tw_dev->srb[request_id]->use_sg == 0) { - dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write(): SG = 0\n"); - buffaddr = tw_map_scsi_single_data(tw_dev->tw_pci_dev, tw_dev->srb[request_id]); - if (buffaddr == 0) - return 1; + use_sg = tw_map_scsi_sg_data(tw_dev->tw_pci_dev, tw_dev->srb[request_id]); + if (!use_sg) + return 1; - command_packet->byte8.io.sgl[0].address = buffaddr; - command_packet->byte8.io.sgl[0].length = tw_dev->srb[request_id]->request_bufflen; + scsi_for_each_sg(tw_dev->srb[request_id], sg, use_sg, i) { + command_packet->byte8.io.sgl[i].address = sg_dma_address(sg); + command_packet->byte8.io.sgl[i].length = sg_dma_len(sg); command_packet->size+=2; } - /* Do this if we have multiple sg list entries */ - if (tw_dev->srb[request_id]->use_sg > 0) { - use_sg = tw_map_scsi_sg_data(tw_dev->tw_pci_dev, tw_dev->srb[request_id]); - if (use_sg == 0) - return 1; - - for (i=0;ibyte8.io.sgl[i].address = sg_dma_address(&sglist[i]); - command_packet->byte8.io.sgl[i].length = sg_dma_len(&sglist[i]); - command_packet->size+=2; - } - } - /* Update SG statistics */ - tw_dev->sgl_entries = tw_dev->srb[request_id]->use_sg; + tw_dev->sgl_entries = scsi_sg_count(tw_dev->srb[request_id]); if (tw_dev->sgl_entries > tw_dev->max_sgl_entries) tw_dev->max_sgl_entries = tw_dev->sgl_entries; -- 2.7.4