From 6ecb6f25d3a52c0d032aa73bde1ff9bc454aa66c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 8 Jan 2009 16:29:20 -0500 Subject: [PATCH] pata_hpt366: reimplement mode programming Reimplement mode programming logic of pata_hpt366 such that it's identical to that of IDE hpt366 driver. The differences were... * pata_hpt366 used 0xCFFF8FFFF to mask pio modes and 0x3FFFFFFF dma modes. IDE hpt366 uses 0xC1F8FFFF for PIO, 0x303800FF for MWDMA and 0x30070000 for UDMA. * pata_hpt366 doesn't set 0x08000000 for PIO unless it's already set and always turns it on for MWDMA/UDMA. IDE hpt366 doesn't bother with the bit. It always uses what was there. * IDE hpt366 always clears 0xC0000000. pata_hpt366 doesn't. Signed-off-by: Tejun Heo Cc: Alan Cox Cc: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt366.c | 109 +++++++++++++++++++--------------------------- 1 file changed, 44 insertions(+), 65 deletions(-) diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index e0c4f05..65c28e5 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -30,7 +30,7 @@ #define DRV_VERSION "0.6.2" struct hpt_clock { - u8 xfer_speed; + u8 xfer_mode; u32 timing; }; @@ -189,28 +189,6 @@ static unsigned long hpt366_filter(struct ata_device *adev, unsigned long mask) return ata_bmdma_mode_filter(adev, mask); } -/** - * hpt36x_find_mode - reset the hpt36x bus - * @ap: ATA port - * @speed: transfer mode - * - * Return the 32bit register programming information for this channel - * that matches the speed provided. - */ - -static u32 hpt36x_find_mode(struct ata_port *ap, int speed) -{ - struct hpt_clock *clocks = ap->host->private_data; - - while(clocks->xfer_speed) { - if (clocks->xfer_speed == speed) - return clocks->timing; - clocks++; - } - BUG(); - return 0xffffffffU; /* silence compiler warning */ -} - static int hpt36x_cable_detect(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); @@ -226,25 +204,16 @@ static int hpt36x_cable_detect(struct ata_port *ap) return ATA_CBL_PATA80; } -/** - * hpt366_set_piomode - PIO setup - * @ap: ATA interface - * @adev: device on the interface - * - * Perform PIO mode setup. - */ - -static void hpt366_set_piomode(struct ata_port *ap, struct ata_device *adev) +static void hpt366_set_mode(struct ata_port *ap, struct ata_device *adev, + u8 mode) { + struct hpt_clock *clocks = ap->host->private_data; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - u32 addr1, addr2; - u32 reg; - u32 mode; + u32 addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); + u32 addr2 = 0x51 + 4 * ap->port_no; + u32 mask, reg; u8 fast; - addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); - addr2 = 0x51 + 4 * ap->port_no; - /* Fast interrupt prediction disable, hold off interrupt disable */ pci_read_config_byte(pdev, addr2, &fast); if (fast & 0x80) { @@ -252,12 +221,43 @@ static void hpt366_set_piomode(struct ata_port *ap, struct ata_device *adev) pci_write_config_byte(pdev, addr2, fast); } + /* determine timing mask and find matching clock entry */ + if (mode < XFER_MW_DMA_0) + mask = 0xc1f8ffff; + else if (mode < XFER_UDMA_0) + mask = 0x303800ff; + else + mask = 0x30070000; + + while (clocks->xfer_mode) { + if (clocks->xfer_mode == mode) + break; + clocks++; + } + if (!clocks->xfer_mode) + BUG(); + + /* + * Combine new mode bits with old config bits and disable + * on-chip PIO FIFO/buffer (and PIO MST mode as well) to avoid + * problems handling I/O errors later. + */ pci_read_config_dword(pdev, addr1, ®); - mode = hpt36x_find_mode(ap, adev->pio_mode); - mode &= ~0x8000000; /* No FIFO in PIO */ - mode &= ~0x30070000; /* Leave config bits alone */ - reg &= 0x30070000; /* Strip timing bits */ - pci_write_config_dword(pdev, addr1, reg | mode); + reg = ((reg & ~mask) | (clocks->timing & mask)) & ~0xc0000000; + pci_write_config_dword(pdev, addr1, reg); +} + +/** + * hpt366_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + * + * Perform PIO mode setup. + */ + +static void hpt366_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + hpt366_set_mode(ap, adev, adev->pio_mode); } /** @@ -271,28 +271,7 @@ static void hpt366_set_piomode(struct ata_port *ap, struct ata_device *adev) static void hpt366_set_dmamode(struct ata_port *ap, struct ata_device *adev) { - struct pci_dev *pdev = to_pci_dev(ap->host->dev); - u32 addr1, addr2; - u32 reg; - u32 mode; - u8 fast; - - addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); - addr2 = 0x51 + 4 * ap->port_no; - - /* Fast interrupt prediction disable, hold off interrupt disable */ - pci_read_config_byte(pdev, addr2, &fast); - if (fast & 0x80) { - fast &= ~0x80; - pci_write_config_byte(pdev, addr2, fast); - } - - pci_read_config_dword(pdev, addr1, ®); - mode = hpt36x_find_mode(ap, adev->dma_mode); - mode |= 0x8000000; /* FIFO in MWDMA or UDMA */ - mode &= ~0xC0000000; /* Leave config bits alone */ - reg &= 0xC0000000; /* Strip timing bits */ - pci_write_config_dword(pdev, addr1, reg | mode); + hpt366_set_mode(ap, adev, adev->dma_mode); } static struct scsi_host_template hpt36x_sht = { -- 2.7.4