From 6eb3c5e7ade4e74c5446d1a0776c0f49c7072d07 Mon Sep 17 00:00:00 2001
From: hpa <hpa>
Date: Tue, 21 Dec 2004 22:32:12 +0000
Subject: [PATCH] extlinux: Document need for MBR, and usage on a RAID system.
 Add cat.c32 as one of the sample programs.

---
 com32/samples/Makefile |  4 ++--
 com32/samples/cat.c    | 31 +++++++++++++++++++++++++++++++
 extlinux.doc           | 24 ++++++++++++++++++++++++
 3 files changed, 57 insertions(+), 2 deletions(-)
 create mode 100644 com32/samples/cat.c

diff --git a/com32/samples/Makefile b/com32/samples/Makefile
index ddcdaa2..07d8156 100644
--- a/com32/samples/Makefile
+++ b/com32/samples/Makefile
@@ -39,9 +39,9 @@ LNXLIBS	   = ../libutil/libutil_lnx.a
 
 .SUFFIXES: .lss .c .o .elf .c32 .lnx
 
-all: 	hello.c32 \
+all: 	hello.c32 cat.c32 \
 	fancyhello.c32 fancyhello.lnx \
-	keytest.c32 keytest.lnx
+	keytest.c32 keytest.lnx \
 
 .PRECIOUS: %.o
 %.o: %.S
diff --git a/com32/samples/cat.c b/com32/samples/cat.c
new file mode 100644
index 0000000..277427f
--- /dev/null
+++ b/com32/samples/cat.c
@@ -0,0 +1,31 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <console.h>
+
+int main(int argc, char *argv[])
+{
+  FILE *f;
+  int ch;
+  int i;
+
+  openconsole(&dev_stdcon_r, &dev_stdcon_w);
+
+  printf("argv = %p\n", argv);
+  for ( i = 0 ; i <= argc ; i++ )
+    printf("argv[%d] = %p = \"%s\"\n", i, argv[i], argv[i]);
+
+  if ( argc < 2 ) {
+    fprintf(stderr, "Missing file name!\n");
+    exit(1);
+  }
+
+  printf("File = %s\n", argv[1]);
+
+  f = fopen(argv[1], "r");
+  while ( (ch = getc(f)) != EOF )
+    putchar(ch);
+
+  fclose(f);
+
+  return 0;
+}
diff --git a/extlinux.doc b/extlinux.doc
index 9844cb7..54e649d 100644
--- a/extlinux.doc
+++ b/extlinux.doc
@@ -30,3 +30,27 @@ It works the same way as SYSLINUX, with a few slight modifications.
    limited to 255 characters.
 
 
+
+Note that EXTLINUX installs in the filesystem partition like a
+well-behaved bootloader :)  Thus, it needs a master boot record in the
+partition table; the mbr.bin shipped with SYSLINUX should work well.
+To install it just do:
+
+	cat mbr.bin > /dev/XXX
+
+... where /dev/XXX is the appropriate master device, e.g. /dev/hda,
+and make sure the correct partition in set active.
+
+
+If you have multiple disks in a software RAID configuration, the
+preferred way to boot is:
+
+- Create a separate RAID-1 partition for /boot.  Note that the Linux
+  RAID-1 driver can span as many disks as you wish.
+
+- Install the MBR on *each disk*, and mark the RAID-1 partition
+  active.
+
+- Run "extlinux /boot" to install extlinux.  This will install it on
+  all the drives in the RAID-1 set, which means you can boot any
+  combination of drives in any order.
-- 
2.7.4