From 6d97d497d48ba88e49dc5ce19c00d5df8eca3d73 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Wed, 20 May 2020 17:42:17 +0800 Subject: [PATCH] dt-bindings: thermal: Convert i.MX to json-schema Convert the i.MX thermal binding to DT schema format using json-schema Signed-off-by: Anson Huang Reviewed-by: Dong Aisheng Signed-off-by: Rob Herring --- .../devicetree/bindings/thermal/imx-thermal.txt | 61 ------------ .../devicetree/bindings/thermal/imx-thermal.yaml | 102 +++++++++++++++++++++ 2 files changed, 102 insertions(+), 61 deletions(-) delete mode 100644 Documentation/devicetree/bindings/thermal/imx-thermal.txt create mode 100644 Documentation/devicetree/bindings/thermal/imx-thermal.yaml diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt deleted file mode 100644 index 823e417..0000000 --- a/Documentation/devicetree/bindings/thermal/imx-thermal.txt +++ /dev/null @@ -1,61 +0,0 @@ -* Temperature Monitor (TEMPMON) on Freescale i.MX SoCs - -Required properties: -- compatible : must be one of following: - - "fsl,imx6q-tempmon" for i.MX6Q, - - "fsl,imx6sx-tempmon" for i.MX6SX, - - "fsl,imx7d-tempmon" for i.MX7S/D. -- interrupts : the interrupt output of the controller: - i.MX6Q has one IRQ which will be triggered when temperature is higher than high threshold, - i.MX6SX and i.MX7S/D have two more IRQs than i.MX6Q, one is IRQ_LOW and the other is IRQ_PANIC, - when temperature is below than low threshold, IRQ_LOW will be triggered, when temperature - is higher than panic threshold, system will auto reboot by SRC module. -- fsl,tempmon : phandle pointer to system controller that contains TEMPMON - control registers, e.g. ANATOP on imx6q. -- nvmem-cells: A phandle to the calibration cells provided by ocotp. -- nvmem-cell-names: Should be "calib", "temp_grade". - -Deprecated properties: -- fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON - calibration data, e.g. OCOTP on imx6q. The details about calibration data - can be found in SoC Reference Manual. - -Direct access to OCOTP via fsl,tempmon-data is incorrect on some newer chips -because it does not handle OCOTP clock requirements. - -Optional properties: -- clocks : thermal sensor's clock source. - -Example: -ocotp: ocotp@21bc000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,imx6sx-ocotp", "syscon"; - reg = <0x021bc000 0x4000>; - clocks = <&clks IMX6SX_CLK_OCOTP>; - - tempmon_calib: calib@38 { - reg = <0x38 4>; - }; - - tempmon_temp_grade: temp-grade@20 { - reg = <0x20 4>; - }; -}; - -tempmon: tempmon { - compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; - interrupts = ; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; -}; - -Legacy method (Deprecated): -tempmon { - compatible = "fsl,imx6q-tempmon"; - fsl,tempmon = <&anatop>; - fsl,tempmon-data = <&ocotp>; - clocks = <&clks 172>; -}; diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml new file mode 100644 index 0000000..aedac16 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/imx-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX Thermal Binding + +maintainers: + - Shawn Guo + - Anson Huang + +properties: + compatible: + enum: + - fsl,imx6q-tempmon + - fsl,imx6sx-tempmon + - fsl,imx7d-tempmon + + interrupts: + description: | + The interrupt output of the controller, i.MX6Q has IRQ_HIGH which + will be triggered when temperature is higher than high threshold, + i.MX6SX and i.MX7S/D have two more IRQs than i.MX6Q, one is IRQ_LOW + and the other is IRQ_PANIC, when temperature is lower than low + threshold, IRQ_LOW will be triggered, when temperature is higher + than panic threshold, IRQ_PANIC will be triggered, and system can + be configured to auto reboot by SRC module for IRQ_PANIC. IRQ_HIGH, + IRQ_LOW and IRQ_PANIC share same interrupt output of controller. + maxItems: 1 + + nvmem-cells: + items: + - description: Phandle to the calibration data provided by ocotp + - description: Phandle to the temperature grade provided by ocotp + + nvmem-cell-names: + items: + - const: calib + - const: temp_grade + + fsl,tempmon: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: Phandle to anatop system controller node. + + fsl,tempmon-data: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Deprecated property, phandle pointer to fuse controller that contains + TEMPMON calibration data, e.g. OCOTP on imx6q. The details about + calibration data can be found in SoC Reference Manual. + deprecated: true + + clocks: + maxItems: 1 + +required: + - compatible + - interrupts + - fsl,tempmon + - nvmem-cells + - nvmem-cell-names + +additionalProperties: false + +examples: + - | + #include + #include + + efuse@21bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,imx6sx-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6SX_CLK_OCOTP>; + + tempmon_calib: calib@38 { + reg = <0x38 4>; + }; + + tempmon_temp_grade: temp-grade@20 { + reg = <0x20 4>; + }; + }; + + anatop@20c8000 { + compatible = "fsl,imx6q-anatop", "syscon", "simple-mfd"; + reg = <0x020c8000 0x1000>; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>, + <0 54 IRQ_TYPE_LEVEL_HIGH>, + <0 127 IRQ_TYPE_LEVEL_HIGH>; + + tempmon { + compatible = "fsl,imx6sx-tempmon"; + interrupts = ; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; + }; + }; -- 2.7.4