From 6d7418c42389fe82095fefc44887385c4f9c688b Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Mon, 7 Mar 2022 16:24:02 -0800 Subject: [PATCH] board: gateworks: gw_ventana: move GPIO config out of common Move gpio configuration out of common and into u-boot code as it is not used by the SPL. Signed-off-by: Tim Harvey --- board/gateworks/gw_ventana/common.c | 86 --------------------------------- board/gateworks/gw_ventana/common.h | 2 - board/gateworks/gw_ventana/gw_ventana.c | 85 ++++++++++++++++++++++++++++++++ 3 files changed, 85 insertions(+), 88 deletions(-) diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c index 6b8900e..725f948 100644 --- a/board/gateworks/gw_ventana/common.c +++ b/board/gateworks/gw_ventana/common.c @@ -1209,92 +1209,6 @@ void setup_iomux_gpio(int board, struct ventana_board_info *info) } } -/* setup GPIO pinmux and default configuration per baseboard and env */ -void setup_board_gpio(int board, struct ventana_board_info *info) -{ - const char *s; - char arg[10]; - size_t len; - int i; - int quiet = simple_strtol(env_get("quiet"), NULL, 10); - - if (board >= GW_UNKNOWN) - return; - - /* RS232_EN# */ - if (gpio_cfg[board].rs232_en) { - gpio_direction_output(gpio_cfg[board].rs232_en, - (hwconfig("rs232")) ? 0 : 1); - } - - /* MSATA Enable */ - if (gpio_cfg[board].msata_en && is_cpu_type(MXC_CPU_MX6Q)) { - gpio_direction_output(GP_MSATA_SEL, - (hwconfig("msata")) ? 1 : 0); - } - - /* USBOTG Select (PCISKT or FrontPanel) */ - if (gpio_cfg[board].usb_sel) { - gpio_direction_output(gpio_cfg[board].usb_sel, - (hwconfig("usb_pcisel")) ? 1 : 0); - } - - /* - * Configure DIO pinmux/padctl registers - * see IMX6DQRM/IMX6SDLRM IOMUXC_SW_PAD_CTL_PAD_* register definitions - */ - for (i = 0; i < gpio_cfg[board].dio_num; i++) { - struct dio_cfg *cfg = &gpio_cfg[board].dio_cfg[i]; - iomux_v3_cfg_t ctrl = DIO_PAD_CFG; - unsigned cputype = is_cpu_type(MXC_CPU_MX6Q) ? 0 : 1; - - if (!cfg->gpio_padmux[0] && !cfg->gpio_padmux[1]) - continue; - sprintf(arg, "dio%d", i); - if (!hwconfig(arg)) - continue; - s = hwconfig_subarg(arg, "padctrl", &len); - if (s) { - ctrl = MUX_PAD_CTRL(hextoul(s, NULL) - & 0x1ffff) | MUX_MODE_SION; - } - if (hwconfig_subarg_cmp(arg, "mode", "gpio")) { - if (!quiet) { - printf("DIO%d: GPIO%d_IO%02d (gpio-%d)\n", i, - (cfg->gpio_param/32)+1, - cfg->gpio_param%32, - cfg->gpio_param); - } - imx_iomux_v3_setup_pad(cfg->gpio_padmux[cputype] | - ctrl); - gpio_requestf(cfg->gpio_param, "dio%d", i); - gpio_direction_input(cfg->gpio_param); - } else if (hwconfig_subarg_cmp(arg, "mode", "pwm") && - cfg->pwm_padmux) { - if (!cfg->pwm_param) { - printf("DIO%d: Error: pwm config invalid\n", - i); - continue; - } - if (!quiet) - printf("DIO%d: pwm%d\n", i, cfg->pwm_param); - imx_iomux_v3_setup_pad(cfg->pwm_padmux[cputype] | - MUX_PAD_CTRL(ctrl)); - } - } - - if (!quiet) { - if (gpio_cfg[board].msata_en && is_cpu_type(MXC_CPU_MX6Q)) { - printf("MSATA: %s\n", (hwconfig("msata") ? - "enabled" : "disabled")); - } - if (gpio_cfg[board].rs232_en) { - printf("RS232: %s\n", (hwconfig("rs232")) ? - "enabled" : "disabled"); - } - } -} - #include #define WDOG1_ADDR 0x20bc000 #define WDOG2_ADDR 0x20c0000 diff --git a/board/gateworks/gw_ventana/common.h b/board/gateworks/gw_ventana/common.h index d7f60a0..a036634 100644 --- a/board/gateworks/gw_ventana/common.h +++ b/board/gateworks/gw_ventana/common.h @@ -81,8 +81,6 @@ extern struct ventana gpio_cfg[GW_UNKNOWN]; /* configure gpio iomux/defaults */ void setup_iomux_gpio(int board, struct ventana_board_info *); -/* late setup of GPIO (configuration per baseboard and env) */ -void setup_board_gpio(int board, struct ventana_board_info *); /* early model/revision ft fixups */ void ft_early_fixup(void *fdt, int board_type); diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index a76f0ea..9b8f7b5 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -576,6 +576,91 @@ static const struct boot_mode board_boot_modes[] = { }; #endif +/* setup GPIO pinmux and default configuration per baseboard and env */ +void setup_board_gpio(int board, struct ventana_board_info *info) +{ + const char *s; + char arg[10]; + size_t len; + int i; + int quiet = simple_strtol(env_get("quiet"), NULL, 10); + + if (board >= GW_UNKNOWN) + return; + + /* RS232_EN# */ + if (gpio_cfg[board].rs232_en) { + gpio_direction_output(gpio_cfg[board].rs232_en, + (hwconfig("rs232")) ? 0 : 1); + } + + /* MSATA Enable */ + if (gpio_cfg[board].msata_en && is_cpu_type(MXC_CPU_MX6Q)) { + gpio_direction_output(GP_MSATA_SEL, + (hwconfig("msata")) ? 1 : 0); + } + + /* USBOTG Select (PCISKT or FrontPanel) */ + if (gpio_cfg[board].usb_sel) { + gpio_direction_output(gpio_cfg[board].usb_sel, + (hwconfig("usb_pcisel")) ? 1 : 0); + } + + /* + * Configure DIO pinmux/padctl registers + * see IMX6DQRM/IMX6SDLRM IOMUXC_SW_PAD_CTL_PAD_* register definitions + */ + for (i = 0; i < gpio_cfg[board].dio_num; i++) { + struct dio_cfg *cfg = &gpio_cfg[board].dio_cfg[i]; + iomux_v3_cfg_t ctrl = DIO_PAD_CFG; + unsigned int cputype = is_cpu_type(MXC_CPU_MX6Q) ? 0 : 1; + + if (!cfg->gpio_padmux[0] && !cfg->gpio_padmux[1]) + continue; + sprintf(arg, "dio%d", i); + if (!hwconfig(arg)) + continue; + s = hwconfig_subarg(arg, "padctrl", &len); + if (s) { + ctrl = MUX_PAD_CTRL(hextoul(s, NULL) + & 0x1ffff) | MUX_MODE_SION; + } + if (hwconfig_subarg_cmp(arg, "mode", "gpio")) { + if (!quiet) { + printf("DIO%d: GPIO%d_IO%02d (gpio-%d)\n", i, + (cfg->gpio_param / 32) + 1, + cfg->gpio_param % 32, + cfg->gpio_param); + } + imx_iomux_v3_setup_pad(cfg->gpio_padmux[cputype] | + ctrl); + gpio_requestf(cfg->gpio_param, "dio%d", i); + gpio_direction_input(cfg->gpio_param); + } else if (hwconfig_subarg_cmp(arg, "mode", "pwm") && + cfg->pwm_padmux) { + if (!cfg->pwm_param) { + printf("DIO%d: Error: pwm config invalid\n", + i); + continue; + } + if (!quiet) + printf("DIO%d: pwm%d\n", i, cfg->pwm_param); + imx_iomux_v3_setup_pad(cfg->pwm_padmux[cputype] | + MUX_PAD_CTRL(ctrl)); + } + } + + if (!quiet) { + if (gpio_cfg[board].msata_en && is_cpu_type(MXC_CPU_MX6Q)) { + printf("MSATA: %s\n", (hwconfig("msata") ? + "enabled" : "disabled")); + } + if (gpio_cfg[board].rs232_en) { + printf("RS232: %s\n", (hwconfig("rs232")) ? + "enabled" : "disabled"); + } + } +} /* late init */ int misc_init_r(void) { -- 2.7.4