From 6ccc7435fab7cc4f158440b086105c263b62a36f Mon Sep 17 00:00:00 2001 From: Dan Murphy Date: Thu, 21 Mar 2019 09:28:35 -0500 Subject: [PATCH] dt: lm3532: Add lm3532 dt doc and update ti_lmu doc Add the lm3532 device tree documentation. Remove lm3532 device tree reference from the ti_lmu devicetree documentation. With the addition of the dedicated lm3532 documentation the device can be removed from the ti_lmu.txt. The reason for this is that the lm3532 dt documentation now defines the ability to control LED output strings against different control banks or groups multiple strings to be controlled by a single control bank. Another addition was for ALS lighting control and configuration. The LM3532 has a feature that can take in the ALS reading from 2 separate ALS devices and adjust the brightness on the strings that are configured to support this feature. Finally the device specific properties were moved to the parent node as these properties are not control bank configurable. These include the runtime ramp and the ALS configuration. Signed-off-by: Dan Murphy Reviewed-by: Rob Herring Acked-for-MFD-by: Lee Jones Acked-by: Tony Lindgren Signed-off-by: Jacek Anaszewski --- .../devicetree/bindings/leds/leds-lm3532.txt | 101 +++++++++++++++++++++ Documentation/devicetree/bindings/mfd/ti-lmu.txt | 20 ---- 2 files changed, 101 insertions(+), 20 deletions(-) create mode 100644 Documentation/devicetree/bindings/leds/leds-lm3532.txt diff --git a/Documentation/devicetree/bindings/leds/leds-lm3532.txt b/Documentation/devicetree/bindings/leds/leds-lm3532.txt new file mode 100644 index 0000000..c087f85 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lm3532.txt @@ -0,0 +1,101 @@ +* Texas Instruments - lm3532 White LED driver with ambient light sensing +capability. + +The LM3532 provides the 3 high-voltage, low-side current sinks. The device is +programmable over an I2C-compatible interface and has independent +current control for all three channels. The adaptive current regulation +method allows for different LED currents in each current sink thus allowing +for a wide variety of backlight and keypad applications. + +The main features of the LM3532 include dual ambient light sensor inputs +each with 32 internal voltage setting resistors, 8-bit logarithmic and linear +brightness control, dual external PWM brightness control inputs, and up to +1000:1 dimming ratio with programmable fade in and fade out settings. + +Required properties: + - compatible : "ti,lm3532" + - reg : I2C slave address + - #address-cells : 1 + - #size-cells : 0 + +Optional properties: + - enable-gpios : gpio pin to enable (active high)/disable the device. + - ramp-up-us - The Run time ramp rates/step are from one current + set-point to another after the device has reached its + initial target set point from turn-on + - ramp-down-us - The Run time ramp rates/step are from one current + set-point to another after the device has reached its + initial target set point from turn-on + Range for ramp settings: 8us - 65536us + +Optional properties if ALS mode is used: + - ti,als-vmin - Minimum ALS voltage defined in Volts + - ti,als-vmax - Maximum ALS voltage defined in Volts + Per the data sheet the max ALS voltage is 2V and the min is 0V + + - ti,als1-imp-sel - ALS1 impedance resistor selection in Ohms + - ti,als2-imp-sel - ALS2 impedance resistor selection in Ohms + Range for impedance select: 37000 Ohms - 1190 Ohms + Values above 37kohms will be set to the "High Impedance" setting + + - ti,als-avrg-time-us - Determines the length of time the device needs to + average the two ALS inputs. This is only used if + the input mode is LM3532_ALS_INPUT_AVRG. + Range: 17920us - 2293760us + - ti,als-input-mode - Determines how the device uses the attached ALS + devices. + 0x00 - ALS1 and ALS2 input average + 0x01 - ALS1 Input + 0x02 - ALS2 Input + 0x03 - Max of ALS1 and ALS2 + +Required child properties: + - reg : Indicates control bank the LED string is controlled by + - led-sources : see Documentation/devicetree/bindings/leds/common.txt + - ti,led-mode : Defines if the LED strings are manually controlled or + if the LED strings are controlled by the ALS. + 0x00 - LED strings are I2C controlled via full scale + brightness control register + 0x01 - LED strings are ALS controlled + +Optional LED child properties: + - label : see Documentation/devicetree/bindings/leds/common.txt + - linux,default-trigger : + see Documentation/devicetree/bindings/leds/common.txt + +Example: +led-controller@38 { + compatible = "ti,lm3532"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x38>; + + enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + ramp-up-us = <1024>; + ramp-down-us = <65536>; + + ti,als-vmin = <0>; + ti,als-vmax = <2000>; + ti,als1-imp-sel = <4110>; + ti,als2-imp-sel = <2180>; + ti,als-avrg-time-us = <17920>; + ti,als-input-mode = <0x00>; + + led@0 { + reg = <0>; + led-sources = <2>; + ti,led-mode = <1>; + label = ":backlight"; + linux,default-trigger = "backlight"; + }; + + led@1 { + reg = <1>; + led-sources = <1>; + ti,led-mode = <0>; + label = ":kbd_backlight"; + }; +}; + +For more product information please see the links below: +http://www.ti.com/product/LM3532 diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt index c885cf8..980394d 100644 --- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt +++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt @@ -4,7 +4,6 @@ TI LMU driver supports lighting devices below. Name Child nodes ------ --------------------------------- - LM3532 Backlight LM3631 Backlight and regulator LM3632 Backlight and regulator LM3633 Backlight, LED and fault monitor @@ -13,7 +12,6 @@ TI LMU driver supports lighting devices below. Required properties: - compatible: Should be one of: - "ti,lm3532" "ti,lm3631" "ti,lm3632" "ti,lm3633" @@ -23,7 +21,6 @@ Required properties: 0x11 for LM3632 0x29 for LM3631 0x36 for LM3633, LM3697 - 0x38 for LM3532 0x63 for LM3695 Optional property: @@ -47,23 +44,6 @@ Optional nodes: [2] ../leds/leds-lm3633.txt [3] ../regulator/lm363x-regulator.txt -lm3532@38 { - compatible = "ti,lm3532"; - reg = <0x38>; - - enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>; - - backlight { - compatible = "ti,lm3532-backlight"; - - lcd { - led-sources = <0 1 2>; - ramp-up-msec = <30>; - ramp-down-msec = <0>; - }; - }; -}; - lm3631@29 { compatible = "ti,lm3631"; reg = <0x29>; -- 2.7.4