From 6cb58ea897dd1d10b1a52c16b344f112102cf7d3 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Tue, 21 Sep 2021 21:25:57 +0200 Subject: [PATCH] remoteproc: meson-mx-ao-arc: Add a driver for the AO ARC remote procesor Amlogic Meson6, Meson8, Meson8b and Meson8m2 embed an ARC core in the Always-On (AO) power-domain. This is typically used for waking up the ARM cores after system suspend. The configuration is spread across three different registers: - AO_REMAP_REG0 which must be programmed to zero, it's actual purpose is unknown. There is a second remap register which is not used in the vendor kernel (which served as reference for this driver). - AO_CPU_CNTL is used to start and stop the ARC core. - AO_SECURE_REG0 in the SECBUS2 register area with unknown purpose. To boot the ARC core we also need to enable it's gate clock and trigger a reset. The actual code for this ARC core can come from an ELF binary, for example by building the Zephyr RTOS for an ARC EM4 core and then taking "zephyr.elf" as firmware. This executable does not have any "rsc table" so we are skipping rproc_elf_load_rsc_table (rproc_ops.parse_fw) and rproc_elf_find_loaded_rsc_table (rproc_ops.find_loaded_rsc_table). Signed-off-by: Martin Blumenstingl Link: https://lore.kernel.org/r/20210921192557.1610709-3-martin.blumenstingl@googlemail.com [Fixed header file order] Signed-off-by: Mathieu Poirier Signed-off-by: Bjorn Andersson --- drivers/remoteproc/Kconfig | 11 ++ drivers/remoteproc/Makefile | 1 + drivers/remoteproc/meson_mx_ao_arc.c | 261 +++++++++++++++++++++++++++++++++++ 3 files changed, 273 insertions(+) create mode 100644 drivers/remoteproc/meson_mx_ao_arc.c diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index f30d00a..dcb87a3 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -127,6 +127,17 @@ config KEYSTONE_REMOTEPROC It's safe to say N here if you're not interested in the Keystone DSPs or just want to use a bare minimum kernel. +config MESON_MX_AO_ARC_REMOTEPROC + tristate "Amlogic Meson6/8/8b/8m2 AO ARC remote processor support" + depends on HAS_IOMEM + depends on (ARM && ARCH_MESON) || COMPILE_TEST + select GENERIC_ALLOCATOR + help + Say m or y here to have support for the AO ARC remote processor + on Amlogic Meson6/Meson8/Meson8b/Meson8m2 SoCs. This is + typically used for system suspend. + If unsure say N. + config PRU_REMOTEPROC tristate "TI PRU remoteproc support" depends on TI_PRUSS diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile index bb26c9e..ce1abeb 100644 --- a/drivers/remoteproc/Makefile +++ b/drivers/remoteproc/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o obj-$(CONFIG_WKUP_M3_RPROC) += wkup_m3_rproc.o obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o obj-$(CONFIG_KEYSTONE_REMOTEPROC) += keystone_remoteproc.o +obj-$(CONFIG_MESON_MX_AO_ARC_REMOTEPROC)+= meson_mx_ao_arc.o obj-$(CONFIG_PRU_REMOTEPROC) += pru_rproc.o obj-$(CONFIG_QCOM_PIL_INFO) += qcom_pil_info.o obj-$(CONFIG_QCOM_RPROC_COMMON) += qcom_common.o diff --git a/drivers/remoteproc/meson_mx_ao_arc.c b/drivers/remoteproc/meson_mx_ao_arc.c new file mode 100644 index 0000000..3d8f927 --- /dev/null +++ b/drivers/remoteproc/meson_mx_ao_arc.c @@ -0,0 +1,261 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2020 Martin Blumenstingl + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "remoteproc_internal.h" + +#define AO_REMAP_REG0 0x0 +#define AO_REMAP_REG0_REMAP_AHB_SRAM_BITS_17_14_FOR_ARM_CPU GENMASK(3, 0) + +#define AO_REMAP_REG1 0x4 +#define AO_REMAP_REG1_MOVE_AHB_SRAM_TO_0X0_INSTEAD_OF_DDR BIT(4) +#define AO_REMAP_REG1_REMAP_AHB_SRAM_BITS_17_14_FOR_MEDIA_CPU GENMASK(3, 0) + +#define AO_CPU_CNTL 0x0 +#define AO_CPU_CNTL_AHB_SRAM_BITS_31_20 GENMASK(28, 16) +#define AO_CPU_CNTL_HALT BIT(9) +#define AO_CPU_CNTL_UNKNONWN BIT(8) +#define AO_CPU_CNTL_RUN BIT(0) + +#define AO_CPU_STAT 0x4 + +#define AO_SECURE_REG0 0x0 +#define AO_SECURE_REG0_AHB_SRAM_BITS_19_12 GENMASK(15, 8) + +/* Only bits [31:20] and [17:14] are usable, all other bits must be zero */ +#define MESON_AO_RPROC_SRAM_USABLE_BITS 0xfff3c000 + +#define MESON_AO_RPROC_MEMORY_OFFSET 0x10000000 + +struct meson_mx_ao_arc_rproc_priv { + void __iomem *remap_base; + void __iomem *cpu_base; + unsigned long sram_va; + phys_addr_t sram_pa; + size_t sram_size; + struct gen_pool *sram_pool; + struct reset_control *arc_reset; + struct clk *arc_pclk; + struct regmap *secbus2_regmap; +}; + +static int meson_mx_ao_arc_rproc_start(struct rproc *rproc) +{ + struct meson_mx_ao_arc_rproc_priv *priv = rproc->priv; + phys_addr_t translated_sram_addr; + u32 tmp; + int ret; + + ret = clk_prepare_enable(priv->arc_pclk); + if (ret) + return ret; + + tmp = FIELD_PREP(AO_REMAP_REG0_REMAP_AHB_SRAM_BITS_17_14_FOR_ARM_CPU, + priv->sram_pa >> 14); + writel(tmp, priv->remap_base + AO_REMAP_REG0); + + /* + * The SRAM content as seen by the ARC core always starts at 0x0 + * regardless of the value given here (this was discovered by trial and + * error). For SoCs older than Meson6 we probably have to set + * AO_REMAP_REG1_MOVE_AHB_SRAM_TO_0X0_INSTEAD_OF_DDR to achieve the + * same. (At least) For Meson8 and newer that bit must not be set. + */ + writel(0x0, priv->remap_base + AO_REMAP_REG1); + + regmap_update_bits(priv->secbus2_regmap, AO_SECURE_REG0, + AO_SECURE_REG0_AHB_SRAM_BITS_19_12, + FIELD_PREP(AO_SECURE_REG0_AHB_SRAM_BITS_19_12, + priv->sram_pa >> 12)); + + ret = reset_control_reset(priv->arc_reset); + if (ret) { + clk_disable_unprepare(priv->arc_pclk); + return ret; + } + + usleep_range(10, 100); + + /* + * Convert from 0xd9000000 to 0xc9000000 as the vendor driver does. + * This only seems to be relevant for the AO_CPU_CNTL register. It is + * unknown why this is needed. + */ + translated_sram_addr = priv->sram_pa - MESON_AO_RPROC_MEMORY_OFFSET; + + tmp = FIELD_PREP(AO_CPU_CNTL_AHB_SRAM_BITS_31_20, + translated_sram_addr >> 20); + tmp |= AO_CPU_CNTL_UNKNONWN | AO_CPU_CNTL_RUN; + writel(tmp, priv->cpu_base + AO_CPU_CNTL); + + usleep_range(20, 200); + + return 0; +} + +static int meson_mx_ao_arc_rproc_stop(struct rproc *rproc) +{ + struct meson_mx_ao_arc_rproc_priv *priv = rproc->priv; + + writel(AO_CPU_CNTL_HALT, priv->cpu_base + AO_CPU_CNTL); + + clk_disable_unprepare(priv->arc_pclk); + + return 0; +} + +static void *meson_mx_ao_arc_rproc_da_to_va(struct rproc *rproc, u64 da, + size_t len, bool *is_iomem) +{ + struct meson_mx_ao_arc_rproc_priv *priv = rproc->priv; + + /* The memory from the ARC core's perspective always starts at 0x0. */ + if ((da + len) > priv->sram_size) + return NULL; + + return (void *)priv->sram_va + da; +} + +static struct rproc_ops meson_mx_ao_arc_rproc_ops = { + .start = meson_mx_ao_arc_rproc_start, + .stop = meson_mx_ao_arc_rproc_stop, + .da_to_va = meson_mx_ao_arc_rproc_da_to_va, + .get_boot_addr = rproc_elf_get_boot_addr, + .load = rproc_elf_load_segments, + .sanity_check = rproc_elf_sanity_check, +}; + +static int meson_mx_ao_arc_rproc_probe(struct platform_device *pdev) +{ + struct meson_mx_ao_arc_rproc_priv *priv; + struct device *dev = &pdev->dev; + const char *fw_name = NULL; + struct rproc *rproc; + int ret; + + device_property_read_string(dev, "firmware-name", &fw_name); + + rproc = devm_rproc_alloc(dev, "meson-mx-ao-arc", + &meson_mx_ao_arc_rproc_ops, fw_name, + sizeof(*priv)); + if (!rproc) + return -ENOMEM; + + rproc->has_iommu = false; + priv = rproc->priv; + + priv->sram_pool = of_gen_pool_get(dev->of_node, "sram", 0); + if (!priv->sram_pool) { + dev_err(dev, "Could not get SRAM pool\n"); + return -ENODEV; + } + + priv->sram_size = gen_pool_avail(priv->sram_pool); + + priv->sram_va = gen_pool_alloc(priv->sram_pool, priv->sram_size); + if (!priv->sram_va) { + dev_err(dev, "Could not alloc memory in SRAM pool\n"); + return -ENOMEM; + } + + priv->sram_pa = gen_pool_virt_to_phys(priv->sram_pool, priv->sram_va); + if (priv->sram_pa & ~MESON_AO_RPROC_SRAM_USABLE_BITS) { + dev_err(dev, "SRAM address contains unusable bits\n"); + ret = -EINVAL; + goto err_free_genpool; + } + + priv->secbus2_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, + "amlogic,secbus2"); + if (IS_ERR(priv->secbus2_regmap)) { + dev_err(dev, "Failed to find SECBUS2 regmap\n"); + ret = PTR_ERR(priv->secbus2_regmap); + goto err_free_genpool; + } + + priv->remap_base = devm_platform_ioremap_resource_byname(pdev, "remap"); + if (IS_ERR(priv->remap_base)) { + ret = PTR_ERR(priv->remap_base); + goto err_free_genpool; + } + + priv->cpu_base = devm_platform_ioremap_resource_byname(pdev, "cpu"); + if (IS_ERR(priv->cpu_base)) { + ret = PTR_ERR(priv->cpu_base); + goto err_free_genpool; + } + + priv->arc_reset = devm_reset_control_get_exclusive(dev, NULL); + if (IS_ERR(priv->arc_reset)) { + dev_err(dev, "Failed to get ARC reset\n"); + ret = PTR_ERR(priv->arc_reset); + goto err_free_genpool; + } + + priv->arc_pclk = devm_clk_get(dev, NULL); + if (IS_ERR(priv->arc_pclk)) { + dev_err(dev, "Failed to get the ARC PCLK\n"); + ret = PTR_ERR(priv->arc_pclk); + goto err_free_genpool; + } + + platform_set_drvdata(pdev, rproc); + + ret = rproc_add(rproc); + if (ret) + goto err_free_genpool; + + return 0; + +err_free_genpool: + gen_pool_free(priv->sram_pool, priv->sram_va, priv->sram_size); + return ret; +} + +static int meson_mx_ao_arc_rproc_remove(struct platform_device *pdev) +{ + struct rproc *rproc = platform_get_drvdata(pdev); + struct meson_mx_ao_arc_rproc_priv *priv = rproc->priv; + + rproc_del(rproc); + gen_pool_free(priv->sram_pool, priv->sram_va, priv->sram_size); + + return 0; +} + +static const struct of_device_id meson_mx_ao_arc_rproc_match[] = { + { .compatible = "amlogic,meson8-ao-arc" }, + { .compatible = "amlogic,meson8b-ao-arc" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, meson_mx_ao_arc_rproc_match); + +static struct platform_driver meson_mx_ao_arc_rproc_driver = { + .probe = meson_mx_ao_arc_rproc_probe, + .remove = meson_mx_ao_arc_rproc_remove, + .driver = { + .name = "meson-mx-ao-arc-rproc", + .of_match_table = meson_mx_ao_arc_rproc_match, + }, +}; +module_platform_driver(meson_mx_ao_arc_rproc_driver); + +MODULE_DESCRIPTION("Amlogic Meson6/8/8b/8m2 AO ARC remote processor driver"); +MODULE_AUTHOR("Martin Blumenstingl "); +MODULE_LICENSE("GPL v2"); -- 2.7.4