From 6c85e4bcfd7c07ca20c0d8ad1bdde652ef99131f Mon Sep 17 00:00:00 2001 From: Viswas G Date: Wed, 18 Oct 2017 11:39:09 +0530 Subject: [PATCH] scsi: pm80xx: Different SAS addresses for phys. Different SAS addresses are assigned for each set of phys. Signed-off-by: Viswas G Acked-by: Jack Wang Signed-off-by: Martin K. Petersen --- drivers/scsi/pm8001/pm8001_init.c | 13 +++++++++---- drivers/scsi/pm8001/pm80xx_hwi.c | 3 +-- 2 files changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index 0e013f7..7a697ca 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -132,7 +132,7 @@ static void pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, int phy_id) sas_phy->oob_mode = OOB_NOT_CONNECTED; sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN; sas_phy->id = phy_id; - sas_phy->sas_addr = &pm8001_ha->sas_addr[0]; + sas_phy->sas_addr = (u8 *)&phy->dev_sas_addr; sas_phy->frame_rcvd = &phy->frame_rcvd[0]; sas_phy->ha = (struct sas_ha_struct *)pm8001_ha->shost->hostdata; sas_phy->lldd_phy = phy; @@ -591,10 +591,12 @@ static void pm8001_post_sas_ha_init(struct Scsi_Host *shost, for (i = 0; i < chip_info->n_phy; i++) { sha->sas_phy[i] = &pm8001_ha->phy[i].sas_phy; sha->sas_port[i] = &pm8001_ha->port[i].sas_port; + sha->sas_phy[i]->sas_addr = + (u8 *)&pm8001_ha->phy[i].dev_sas_addr; } sha->sas_ha_name = DRV_NAME; sha->dev = pm8001_ha->dev; - + sha->strict_wide_ports = 1; sha->lldd_module = THIS_MODULE; sha->sas_addr = &pm8001_ha->sas_addr[0]; sha->num_phys = chip_info->n_phy; @@ -611,6 +613,7 @@ static void pm8001_post_sas_ha_init(struct Scsi_Host *shost, static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha) { u8 i, j; + u8 sas_add[8]; #ifdef PM8001_READ_VPD /* For new SPC controllers WWN is stored in flash vpd * For SPC/SPCve controllers WWN is stored in EEPROM @@ -672,10 +675,12 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha) pm8001_ha->sas_addr[j] = payload.func_specific[0x804 + i]; } - + memcpy(sas_add, pm8001_ha->sas_addr, SAS_ADDR_SIZE); for (i = 0; i < pm8001_ha->chip->n_phy; i++) { + if (i && ((i % 4) == 0)) + sas_add[7] = sas_add[7] + 4; memcpy(&pm8001_ha->phy[i].dev_sas_addr, - pm8001_ha->sas_addr, SAS_ADDR_SIZE); + sas_add, SAS_ADDR_SIZE); PM8001_INIT_DBG(pm8001_ha, pm8001_printk("phy %d sas_addr = %016llx\n", i, pm8001_ha->phy[i].dev_sas_addr)); diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 8fb5ddf..2b26445 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -3041,7 +3041,6 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb) port->port_state = portstate; phy->identify.device_type = 0; phy->phy_attached = 0; - memset(&phy->dev_sas_addr, 0, SAS_ADDR_SIZE); switch (portstate) { case PORT_VALID: break; @@ -4394,7 +4393,7 @@ pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id) payload.sas_identify.dev_type = SAS_END_DEVICE; payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL; memcpy(payload.sas_identify.sas_addr, - pm8001_ha->sas_addr, SAS_ADDR_SIZE); + &pm8001_ha->phy[phy_id].dev_sas_addr, SAS_ADDR_SIZE); payload.sas_identify.phy_id = phy_id; ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload, 0); return ret; -- 2.7.4