From 6bed04fbd426eb7d0614900095b92830772c80eb Mon Sep 17 00:00:00 2001 From: Fabien Dessenne Date: Fri, 31 May 2019 15:11:34 +0200 Subject: [PATCH] remoteproc: Introduce STM32 Cortex-M4 remoteproc driver This patch introduces support of Cortex-M4 remote processor for STM32 MCU and MPU families. Signed-off-by: Loic Pallardy Signed-off-by: Fabien Dessenne --- drivers/remoteproc/Kconfig | 10 ++ drivers/remoteproc/Makefile | 1 + drivers/remoteproc/stm32_copro.c | 257 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 268 insertions(+) create mode 100644 drivers/remoteproc/stm32_copro.c diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index 9eb532b..fa6f111 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -40,6 +40,16 @@ config REMOTEPROC_SANDBOX Say 'y' here to add support for test processor which does dummy operations for sandbox platform. +config REMOTEPROC_STM32_COPRO + bool "Support for STM32 coprocessor" + select REMOTEPROC + depends on DM + depends on ARCH_STM32MP + depends on OF_CONTROL + help + Say 'y' here to add support for STM32 Cortex-M4 coprocessors via the + remoteproc framework. + config REMOTEPROC_TI_POWER bool "Support for TI Power processor" select REMOTEPROC diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile index 7517947..b9a06ac 100644 --- a/drivers/remoteproc/Makefile +++ b/drivers/remoteproc/Makefile @@ -10,4 +10,5 @@ obj-$(CONFIG_$(SPL_)REMOTEPROC) += rproc-uclass.o rproc-elf-loader.o obj-$(CONFIG_K3_SYSTEM_CONTROLLER) += k3_system_controller.o obj-$(CONFIG_REMOTEPROC_K3) += k3_rproc.o obj-$(CONFIG_REMOTEPROC_SANDBOX) += sandbox_testproc.o +obj-$(CONFIG_REMOTEPROC_STM32_COPRO) += stm32_copro.o obj-$(CONFIG_REMOTEPROC_TI_POWER) += ti_power_proc.o diff --git a/drivers/remoteproc/stm32_copro.c b/drivers/remoteproc/stm32_copro.c new file mode 100644 index 0000000..de3b972 --- /dev/null +++ b/drivers/remoteproc/stm32_copro.c @@ -0,0 +1,257 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2019, STMicroelectronics - All Rights Reserved + */ +#define pr_fmt(fmt) "%s: " fmt, __func__ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define RCC_GCR_HOLD_BOOT 0 +#define RCC_GCR_RELEASE_BOOT 1 + +/** + * struct stm32_copro_privdata - power processor private data + * @reset_ctl: reset controller handle + * @hold_boot_regmap: regmap for remote processor reset hold boot + * @hold_boot_offset: offset of the register controlling the hold boot setting + * @hold_boot_mask: bitmask of the register for the hold boot field + * @is_running: is the remote processor running + */ +struct stm32_copro_privdata { + struct reset_ctl reset_ctl; + struct regmap *hold_boot_regmap; + uint hold_boot_offset; + uint hold_boot_mask; + bool is_running; +}; + +/** + * stm32_copro_probe() - Basic probe + * @dev: corresponding STM32 remote processor device + * @return 0 if all went ok, else corresponding -ve error + */ +static int stm32_copro_probe(struct udevice *dev) +{ + struct stm32_copro_privdata *priv; + struct regmap *regmap; + const fdt32_t *cell; + int len, ret; + + priv = dev_get_priv(dev); + + regmap = syscon_regmap_lookup_by_phandle(dev, "st,syscfg-holdboot"); + if (IS_ERR(regmap)) { + dev_err(dev, "unable to find holdboot regmap (%ld)\n", + PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + cell = dev_read_prop(dev, "st,syscfg-holdboot", &len); + if (len < 3 * sizeof(fdt32_t)) { + dev_err(dev, "holdboot offset and mask not available\n"); + return -EINVAL; + } + + priv->hold_boot_regmap = regmap; + priv->hold_boot_offset = fdtdec_get_number(cell + 1, 1); + priv->hold_boot_mask = fdtdec_get_number(cell + 2, 1); + + ret = reset_get_by_index(dev, 0, &priv->reset_ctl); + if (ret) { + dev_err(dev, "failed to get reset (%d)\n", ret); + return ret; + } + + dev_dbg(dev, "probed\n"); + + return 0; +} + +/** + * stm32_copro_set_hold_boot() - Hold boot bit management + * @dev: corresponding STM32 remote processor device + * @hold: hold boot value + * @return 0 if all went ok, else corresponding -ve error + */ +static int stm32_copro_set_hold_boot(struct udevice *dev, bool hold) +{ + struct stm32_copro_privdata *priv; + uint val; + int ret; + + priv = dev_get_priv(dev); + + val = hold ? RCC_GCR_HOLD_BOOT : RCC_GCR_RELEASE_BOOT; + + /* + * Note: shall run an SMC call (STM32_SMC_RCC) if platform is secured. + * To be updated when the code for this SMC service is available which + * is not the case for the time being. + */ + ret = regmap_update_bits(priv->hold_boot_regmap, priv->hold_boot_offset, + priv->hold_boot_mask, val); + if (ret) + dev_err(dev, "failed to set hold boot\n"); + + return ret; +} + +/** + * stm32_copro_device_to_virt() - Convert device address to virtual address + * @dev: corresponding STM32 remote processor device + * @da: device address + * @return converted virtual address + */ +static void *stm32_copro_device_to_virt(struct udevice *dev, ulong da) +{ + fdt32_t in_addr = cpu_to_be32(da); + u64 paddr; + + paddr = dev_translate_dma_address(dev, &in_addr); + if (paddr == OF_BAD_ADDR) { + dev_err(dev, "Unable to convert address %ld\n", da); + return NULL; + } + + return phys_to_virt(paddr); +} + +/** + * stm32_copro_load() - Loadup the STM32 remote processor + * @dev: corresponding STM32 remote processor device + * @addr: Address in memory where image is stored + * @size: Size in bytes of the image + * @return 0 if all went ok, else corresponding -ve error + */ +static int stm32_copro_load(struct udevice *dev, ulong addr, ulong size) +{ + struct stm32_copro_privdata *priv; + int ret; + + priv = dev_get_priv(dev); + + ret = stm32_copro_set_hold_boot(dev, true); + if (ret) + return ret; + + ret = reset_assert(&priv->reset_ctl); + if (ret) { + dev_err(dev, "Unable to assert reset line (ret=%d)\n", ret); + return ret; + } + + /* Support only ELF32 image */ + ret = rproc_elf32_sanity_check(addr, size); + if (ret) { + dev_err(dev, "Invalid ELF32 image (%d)\n", ret); + return ret; + } + + return rproc_elf32_load_image(dev, addr); +} + +/** + * stm32_copro_start() - Start the STM32 remote processor + * @dev: corresponding STM32 remote processor device + * @return 0 if all went ok, else corresponding -ve error + */ +static int stm32_copro_start(struct udevice *dev) +{ + struct stm32_copro_privdata *priv; + int ret; + + priv = dev_get_priv(dev); + + /* move hold boot from true to false start the copro */ + ret = stm32_copro_set_hold_boot(dev, false); + if (ret) + return ret; + + /* + * Once copro running, reset hold boot flag to avoid copro + * rebooting autonomously + */ + ret = stm32_copro_set_hold_boot(dev, true); + priv->is_running = !ret; + return ret; +} + +/** + * stm32_copro_reset() - Reset the STM32 remote processor + * @dev: corresponding STM32 remote processor device + * @return 0 if all went ok, else corresponding -ve error + */ +static int stm32_copro_reset(struct udevice *dev) +{ + struct stm32_copro_privdata *priv; + int ret; + + priv = dev_get_priv(dev); + + ret = stm32_copro_set_hold_boot(dev, true); + if (ret) + return ret; + + ret = reset_assert(&priv->reset_ctl); + if (ret) { + dev_err(dev, "Unable to assert reset line (ret=%d)\n", ret); + return ret; + } + + priv->is_running = false; + + return 0; +} + +/** + * stm32_copro_stop() - Stop the STM32 remote processor + * @dev: corresponding STM32 remote processor device + * @return 0 if all went ok, else corresponding -ve error + */ +static int stm32_copro_stop(struct udevice *dev) +{ + return stm32_copro_reset(dev); +} + +/** + * stm32_copro_is_running() - Is the STM32 remote processor running + * @dev: corresponding STM32 remote processor device + * @return 1 if the remote processor is running, 0 otherwise + */ +static int stm32_copro_is_running(struct udevice *dev) +{ + struct stm32_copro_privdata *priv; + + priv = dev_get_priv(dev); + return priv->is_running; +} + +static const struct dm_rproc_ops stm32_copro_ops = { + .load = stm32_copro_load, + .start = stm32_copro_start, + .stop = stm32_copro_stop, + .reset = stm32_copro_reset, + .is_running = stm32_copro_is_running, + .device_to_virt = stm32_copro_device_to_virt, +}; + +static const struct udevice_id stm32_copro_ids[] = { + {.compatible = "st,stm32mp1-rproc"}, + {} +}; + +U_BOOT_DRIVER(stm32_copro) = { + .name = "stm32_m4_proc", + .of_match = stm32_copro_ids, + .id = UCLASS_REMOTEPROC, + .ops = &stm32_copro_ops, + .probe = stm32_copro_probe, + .priv_auto_alloc_size = sizeof(struct stm32_copro_privdata), +}; -- 2.7.4