From 6a2a0e738225fc9ec063f84b79f0adf5c0ed176c Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Sat, 9 Jul 2011 00:17:51 -0400 Subject: [PATCH] ath5k: fix typos, bad comment formatting and GHz in place of MHz Signed-off-by: Pavel Roskin Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/ani.c | 2 +- drivers/net/wireless/ath/ath5k/ath5k.h | 26 ++++++++--------- drivers/net/wireless/ath/ath5k/attach.c | 4 +-- drivers/net/wireless/ath/ath5k/base.c | 14 ++++----- drivers/net/wireless/ath/ath5k/base.h | 4 +-- drivers/net/wireless/ath/ath5k/caps.c | 4 +-- drivers/net/wireless/ath/ath5k/desc.h | 4 +-- drivers/net/wireless/ath/ath5k/dma.c | 6 ++-- drivers/net/wireless/ath/ath5k/eeprom.c | 8 ++--- drivers/net/wireless/ath/ath5k/eeprom.h | 10 +++---- drivers/net/wireless/ath/ath5k/initvals.c | 2 +- drivers/net/wireless/ath/ath5k/mac80211-ops.c | 4 +-- drivers/net/wireless/ath/ath5k/pci.c | 12 ++++---- drivers/net/wireless/ath/ath5k/pcu.c | 12 ++++---- drivers/net/wireless/ath/ath5k/phy.c | 18 ++++++------ drivers/net/wireless/ath/ath5k/reg.h | 42 +++++++++++++-------------- drivers/net/wireless/ath/ath5k/reset.c | 10 +++---- drivers/net/wireless/ath/ath5k/rfgain.h | 6 ++-- 18 files changed, 94 insertions(+), 94 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/ani.c b/drivers/net/wireless/ath/ath5k/ani.c index b88d10c..2f0b967 100644 --- a/drivers/net/wireless/ath/ath5k/ani.c +++ b/drivers/net/wireless/ath/ath5k/ani.c @@ -74,7 +74,7 @@ ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level) static const s8 fr[] = { -78, -80 }; #endif if (level < 0 || level >= ARRAY_SIZE(sz)) { - ATH5K_ERR(ah->ah_sc, "noise immuniy level %d out of range", + ATH5K_ERR(ah->ah_sc, "noise immunity level %d out of range", level); return; } diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h index b1de4a0..50d7580 100644 --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -18,9 +18,9 @@ #ifndef _ATH5K_H #define _ATH5K_H -/* TODO: Clean up channel debuging -doesn't work anyway- and start +/* TODO: Clean up channel debugging (doesn't work anyway) and start * working on reg. control code using all available eeprom information - * -rev. engineering needed- */ + * (rev. engineering needed) */ #define CHAN_DEBUG 0 #include @@ -156,7 +156,7 @@ } while (0) /* - * Some tuneable values (these should be changeable by the user) + * Some tunable values (these should be changeable by the user) * TODO: Make use of them and add more options OR use debug/configfs */ #define AR5K_TUNE_DMA_BEACON_RESP 2 @@ -171,8 +171,8 @@ #define AR5K_TUNE_RSSI_THRES 129 /* This must be set when setting the RSSI threshold otherwise it can * prevent a reset. If AR5K_RSSI_THR is read after writing to it - * the BMISS_THRES will be seen as 0, seems harware doesn't keep - * track of it. Max value depends on harware. For AR5210 this is just 7. + * the BMISS_THRES will be seen as 0, seems hardware doesn't keep + * track of it. Max value depends on hardware. For AR5210 this is just 7. * For AR5211+ this seems to be up to 255. */ #define AR5K_TUNE_BMISS_THRES 7 #define AR5K_TUNE_REGISTER_DWELL_TIME 20000 @@ -380,7 +380,7 @@ struct ath5k_srev_name { * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s * signaling rate achieved through the bonding of two 54Mbit/s 802.11g - * channels. To use this feature your Access Point must also suport it. + * channels. To use this feature your Access Point must also support it. * There is also a distinction between "static" and "dynamic" turbo modes: * * - Static: is the dumb version: devices set to this mode stick to it until @@ -496,7 +496,7 @@ enum ath5k_tx_queue { */ enum ath5k_tx_queue_subtype { AR5K_WME_AC_BK = 0, /*Background traffic*/ - AR5K_WME_AC_BE, /*Best-effort (normal) traffic)*/ + AR5K_WME_AC_BE, /*Best-effort (normal) traffic*/ AR5K_WME_AC_VI, /*Video traffic*/ AR5K_WME_AC_VO, /*Voice traffic*/ }; @@ -690,7 +690,7 @@ struct ath5k_gain { #define CHANNEL_MODES CHANNEL_ALL /* - * Used internaly for reset_tx_queue). + * Used internally for ath5k_hw_reset_tx_queue(). * Also see struct struct ieee80211_channel. */ #define IS_CHAN_XR(_c) ((_c->hw_value & CHANNEL_XR) != 0) @@ -712,7 +712,7 @@ struct ath5k_athchan_2ghz { \******************/ /** - * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32. + * Seems the ar5xxx hardware supports up to 32 rates, indexed by 1-32. * * The rate code is used to get the RX rate or set the TX rate on the * hardware descriptors. It is also used for internal modulation control @@ -802,7 +802,7 @@ extern int ath5k_modparam_nohwcrypt; * http://www.freepatentsonline.com/20030225739.html * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors). * Note that Rx overrun is not always fatal, on some chips we can continue - * operation without reseting the card, that's why int_fatal is not + * operation without resetting the card, that's why int_fatal is not * common for all chips. * @AR5K_INT_TX: mask to identify received frame interrupts, of type * AR5K_ISR_TXOK or AR5K_ISR_TXERR @@ -832,13 +832,13 @@ extern int ath5k_modparam_nohwcrypt; * AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR. * @AR5K_INT_GLOBAL: Used to clear and set the IER * @AR5K_INT_NOCARD: signals the card has been removed - * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same + * @AR5K_INT_COMMON: common interrupts shared among MACs with the same * bit value * * These are mapped to take advantage of some common bits * between the MACs, to be able to set intr properties * easier. Some of them are not used yet inside hw.c. Most map - * to the respective hw interrupt value as they are common amogst different + * to the respective hw interrupt value as they are common among different * MACs. */ enum ath5k_int { @@ -1358,7 +1358,7 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, u8 mode, bool fast); /* - * Functions used internaly + * Functions used internally */ static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah) diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c index d6fbb57a..14dc52e 100644 --- a/drivers/net/wireless/ath/ath5k/attach.c +++ b/drivers/net/wireless/ath/ath5k/attach.c @@ -244,7 +244,7 @@ int ath5k_hw_init(struct ath5k_softc *sc) } - /* Return on unsuported chips (unsupported eeprom etc) */ + /* Return on unsupported chips (unsupported eeprom etc) */ if ((srev >= AR5K_SREV_AR5416) && (srev < AR5K_SREV_AR2425)) { ATH5K_ERR(sc, "Device not yet supported.\n"); ret = -ENODEV; @@ -285,7 +285,7 @@ int ath5k_hw_init(struct ath5k_softc *sc) ath5k_hw_reg_write(ah, 0x28000039, AR5K_PCIE_SERDES); ath5k_hw_reg_write(ah, 0x53160824, AR5K_PCIE_SERDES); - /* If serdes programing is enabled, increase PCI-E + /* If serdes programming is enabled, increase PCI-E * tx power for systems with long trace from host * to minicard connector. */ if (ee->ee_serdes) diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 28113e0..3e5e9b7 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -531,7 +531,7 @@ ath5k_update_bssid_mask_and_opmode(struct ath5k_softc *sc, if (iter_data.n_stas > 1) { /* If you have multiple STA interfaces connected to * different APs, ARPs are not received (most of the time?) - * Enabling PROMISC appears to fix that probem. + * Enabling PROMISC appears to fix that problem. */ sc->filter_flags |= AR5K_RX_FILTER_PROM; } @@ -1349,7 +1349,7 @@ ath5k_receive_frame(struct ath5k_softc *sc, struct sk_buff *skb, * timestamp (beginning of phy frame, data frame, end of rx?). * The only thing we know is that it is hardware specific... * On AR5213 it seems the rx timestamp is at the end of the - * frame, but i'm not sure. + * frame, but I'm not sure. * * NOTE: mac80211 defines mactime at the beginning of the first * data symbol. Since we don't have any time references it's @@ -1764,7 +1764,7 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) * 4 beacons to make sure everybody hears our AP. * When a client tries to associate, hw will keep * track of the tx antenna to be used for this client - * automaticaly, based on ACKed packets. + * automatically, based on ACKed packets. * * Note: AP still listens and transmits RTS on the * default antenna which is supposed to be an omni. @@ -2099,11 +2099,11 @@ static void ath5k_tasklet_beacon(unsigned long data) * * In IBSS mode we use this interrupt just to * keep track of the next TBTT (target beacon - * transmission time) in order to detect wether + * transmission time) in order to detect whether * automatic TSF updates happened. */ if (sc->opmode == NL80211_IFTYPE_ADHOC) { - /* XXX: only if VEOL suppported */ + /* XXX: only if VEOL supported */ u64 tsf = ath5k_hw_get_tsf64(sc->ah); sc->nexttbtt += sc->bintval; ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, @@ -2466,7 +2466,7 @@ ath5k_init_softc(struct ath5k_softc *sc, const struct ath_bus_ops *bus_ops) sc->ah->ah_radio_5ghz_revision), sc->ah->ah_radio_5ghz_revision); /* No 2GHz support (5110 and some - * 5Ghz only cards) -> report 5Ghz radio */ + * 5GHz only cards) -> report 5GHz radio */ } else if (!test_bit(AR5K_MODE_11B, sc->ah->ah_capabilities.cap_mode)) { ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n", @@ -2796,7 +2796,7 @@ ath5k_init(struct ieee80211_hw *hw) /* * Collect the channel list. The 802.11 layer - * is resposible for filtering this list based + * is responsible for filtering this list based * on settings like the phy mode and regulatory * domain restrictions. */ diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h index e71494ee..0a98777 100644 --- a/drivers/net/wireless/ath/ath5k/base.h +++ b/drivers/net/wireless/ath/ath5k/base.h @@ -121,7 +121,7 @@ struct ath5k_statistics { /* frame errors */ unsigned int rx_all_count; /* all RX frames, including errors */ unsigned int tx_all_count; /* all TX frames, including errors */ - unsigned int rx_bytes_count; /* all RX bytes, including errored pks + unsigned int rx_bytes_count; /* all RX bytes, including errored pkts * and the MAC headers for each packet */ unsigned int tx_bytes_count; /* all TX bytes, including errored pkts @@ -250,7 +250,7 @@ struct ath5k_softc { unsigned int nexttbtt; /* next beacon time in TU */ struct ath5k_txq *cabq; /* content after beacon */ - int power_level; /* Requested tx power in dbm */ + int power_level; /* Requested tx power in dBm */ bool assoc; /* associate state */ bool enable_beacon; /* true if beacons are on */ diff --git a/drivers/net/wireless/ath/ath5k/caps.c b/drivers/net/wireless/ath/ath5k/caps.c index 7dd88e1..c752982 100644 --- a/drivers/net/wireless/ath/ath5k/caps.c +++ b/drivers/net/wireless/ath/ath5k/caps.c @@ -52,8 +52,8 @@ int ath5k_hw_set_capabilities(struct ath5k_hw *ah) __set_bit(AR5K_MODE_11A, caps->cap_mode); } else { /* - * XXX The tranceiver supports frequencies from 4920 to 6100GHz - * XXX and from 2312 to 2732GHz. There are problems with the + * XXX The transceiver supports frequencies from 4920 to 6100MHz + * XXX and from 2312 to 2732MHz. There are problems with the * XXX current ieee80211 implementation because the IEEE * XXX channel mapping does not support negative channel * XXX numbers (2312MHz is channel -19). Of course, this diff --git a/drivers/net/wireless/ath/ath5k/desc.h b/drivers/net/wireless/ath/ath5k/desc.h index 2509d0b..cfd529b5 100644 --- a/drivers/net/wireless/ath/ath5k/desc.h +++ b/drivers/net/wireless/ath/ath5k/desc.h @@ -58,11 +58,11 @@ struct ath5k_hw_rx_status { #define AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002 /* reception success */ #define AR5K_5210_RX_DESC_STATUS1_CRC_ERROR 0x00000004 /* CRC error */ #define AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN_5210 0x00000008 /* [5210] FIFO overrun */ -#define AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR 0x00000010 /* decyption CRC failure */ +#define AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR 0x00000010 /* decryption CRC failure */ #define AR5K_5210_RX_DESC_STATUS1_PHY_ERROR 0x000000e0 /* PHY error */ #define AR5K_5210_RX_DESC_STATUS1_PHY_ERROR_S 5 #define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID 0x00000100 /* key index valid */ -#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX 0x00007e00 /* decyption key index */ +#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX 0x00007e00 /* decryption key index */ #define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_S 9 #define AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP 0x0fff8000 /* 13 bit of TSF */ #define AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP_S 15 diff --git a/drivers/net/wireless/ath/ath5k/dma.c b/drivers/net/wireless/ath/ath5k/dma.c index 02e2e3f..b788ecf 100644 --- a/drivers/net/wireless/ath/ath5k/dma.c +++ b/drivers/net/wireless/ath/ath5k/dma.c @@ -25,7 +25,7 @@ * * Here we setup descriptor pointers (rxdp/txdp) start/stop dma engine and * handle queue setup for 5210 chipset (rest are handled on qcu.c). - * Also we setup interrupt mask register (IMR) and read the various iterrupt + * Also we setup interrupt mask register (IMR) and read the various interrupt * status registers (ISR). * * TODO: Handle SISR on 5211+ and introduce a function to return the queue @@ -726,7 +726,7 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) int_mask |= AR5K_IMR_RXDOPPLER; /* Note: Per queue interrupt masks - * are set via reset_tx_queue (qcu.c) */ + * are set via ath5k_hw_reset_tx_queue() (qcu.c) */ ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR); ath5k_hw_reg_write(ah, simr2, AR5K_SIMR2); @@ -783,7 +783,7 @@ void ath5k_hw_dma_init(struct ath5k_hw *ah) * for all PCI-E cards to be safe). * * XXX: need to check 5210 for this - * TODO: Check out tx triger level, it's always 64 on dumps but I + * TODO: Check out tx trigger level, it's always 64 on dumps but I * guess we can tweak it and see how it goes ;-) */ if (ah->ah_version != AR5K_AR5210) { diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index f97a540..d9e605e 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -634,7 +634,7 @@ ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset) /* Used to match PCDAC steps with power values on RF5111 chips * (eeprom versions < 4). For RF5111 we have 11 pre-defined PCDAC * steps that match with the power values we read from eeprom. On - * older eeprom versions (< 3.2) these steps are equaly spaced at + * older eeprom versions (< 3.2) these steps are equally spaced at * 10% of the pcdac curve -until the curve reaches its maximum- * (11 steps from 0 to 100%) but on newer eeprom versions (>= 3.2) * these 11 steps are spaced in a different way. This function returns @@ -764,7 +764,7 @@ ath5k_eeprom_convert_pcal_info_5111(struct ath5k_hw *ah, int mode, /* Fill raw dataset * (convert power to 0.25dB units - * for RF5112 combatibility) */ + * for RF5112 compatibility) */ for (point = 0; point < pd->pd_points; point++) { /* Absolute values */ @@ -884,7 +884,7 @@ ath5k_eeprom_read_pcal_info_5111(struct ath5k_hw *ah, int mode) * Read power calibration for RF5112 chips * * For RF5112 we have 4 XPD -eXternal Power Detector- curves - * for each calibrated channel on 0, -6, -12 and -18dbm but we only + * for each calibrated channel on 0, -6, -12 and -18dBm but we only * use the higher (3) and the lower (0) curves. Each curve has 0.5dB * power steps on x axis and PCDAC steps on y axis and looks like a * linear function. To recreate the curve and pass the power values @@ -1241,7 +1241,7 @@ ath5k_eeprom_convert_pcal_info_2413(struct ath5k_hw *ah, int mode, /* Fill raw dataset * convert all pwr levels to - * quarter dB for RF5112 combatibility */ + * quarter dB for RF5112 compatibility */ pd->pd_step[0] = pcinfo->pddac_i[pdg]; pd->pd_pwr[0] = 4 * pcinfo->pwr_i[pdg]; diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h index 6d440e0..dc2bcfe 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.h +++ b/drivers/net/wireless/ath/ath5k/eeprom.h @@ -50,7 +50,7 @@ #define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1) /* EEPROM Version */ #define AR5K_EEPROM_VERSION_3_0 0x3000 /* No idea what's going on before this version */ -#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2Ghz (ar5211_rfregs) */ +#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2GHz (ar5211_rfregs) */ #define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */ #define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */ #define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain, ee_cck_ofdm_power_delta (eeprom_read_modes) */ @@ -75,11 +75,11 @@ #define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1) #define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1) #define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1) -#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2Ghz */ +#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2GHz */ #define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for < 2W power consumption */ #define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7) /* Device type (1 Cardbus, 2 PCI, 3 MiniPCI, 4 AP) */ #define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */ -#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz */ +#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5GHz */ /* Newer EEPROMs are using a different offset */ #define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \ @@ -120,7 +120,7 @@ #define AR5K_EEPROM_FF_DIS(_v) (((_v) >> 2) & 0x1) /* disable fast frames */ #define AR5K_EEPROM_BURST_DIS(_v) (((_v) >> 3) & 0x1) /* disable bursting */ #define AR5K_EEPROM_MAX_QCU(_v) (((_v) >> 4) & 0xf) /* max number of QCUs. defaults to 10 */ -#define AR5K_EEPROM_HEAVY_CLIP_EN(_v) (((_v) >> 8) & 0x1) /* enable heayy clipping */ +#define AR5K_EEPROM_HEAVY_CLIP_EN(_v) (((_v) >> 8) & 0x1) /* enable heavy clipping */ #define AR5K_EEPROM_KEY_CACHE_SIZE(_v) (((_v) >> 12) & 0xf) /* key cache size. defaults to 128 */ #define AR5K_EEPROM_MISC6 AR5K_EEPROM_INFO(10) @@ -270,7 +270,7 @@ enum ath5k_ctl_mode { /* Per channel calibration data, used for power table setup */ struct ath5k_chan_pcal_info_rf5111 { - /* Power levels in half dbm units + /* Power levels in half dBm units * for one power curve. */ u8 pwr[AR5K_EEPROM_N_PWR_POINTS_5111]; /* PCDAC table steps diff --git a/drivers/net/wireless/ath/ath5k/initvals.c b/drivers/net/wireless/ath/ath5k/initvals.c index 4bfdc2e..855d1af 100644 --- a/drivers/net/wireless/ath/ath5k/initvals.c +++ b/drivers/net/wireless/ath/ath5k/initvals.c @@ -1409,7 +1409,7 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool skip_pcu) * Write initial register settings */ - /* For AR5212 and combatible */ + /* For AR5212 and compatible */ if (ah->ah_version == AR5K_AR5212) { /* First set of mode-specific settings */ diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c index 4939082..0d5ab34 100644 --- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c +++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c @@ -348,7 +348,7 @@ ath5k_prepare_multicast(struct ieee80211_hw *hw, mfilt[pos / 32] |= (1 << (pos % 32)); /* XXX: we might be able to just do this instead, * but not sure, needs testing, if we do use this we'd - * neet to inform below to not reset the mcast */ + * need to inform below not to reset the mcast */ /* ath5k_hw_set_mcast_filterindex(ah, * ha->addr[5]); */ } @@ -471,7 +471,7 @@ ath5k_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, if (iter_data.n_stas > 1) { /* If you have multiple STA interfaces connected to * different APs, ARPs are not received (most of the time?) - * Enabling PROMISC appears to fix that probem. + * Enabling PROMISC appears to fix that problem. */ rfilt |= AR5K_RX_FILTER_PROM; } diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c index cd60f0a..aac5b78 100644 --- a/drivers/net/wireless/ath/ath5k/pci.c +++ b/drivers/net/wireless/ath/ath5k/pci.c @@ -34,12 +34,12 @@ static DEFINE_PCI_DEVICE_TABLE(ath5k_pci_id_table) = { { PCI_VDEVICE(3COM_2, 0x0013) }, /* 3com 5212 */ { PCI_VDEVICE(3COM, 0x0013) }, /* 3com 3CRDAG675 5212 */ { PCI_VDEVICE(ATHEROS, 0x1014) }, /* IBM minipci 5212 */ - { PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 combatible */ - { PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 combatible */ - { PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 combatible */ - { PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 combatible */ - { PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 combatible */ - { PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 combatible */ + { PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 compatible */ + { PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 compatible */ + { PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 compatible */ + { PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 compatible */ + { PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 compatible */ + { PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 compatible */ { PCI_VDEVICE(ATHEROS, 0x001a) }, /* 2413 Griffin-lite */ { PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */ { PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */ diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c index aecd724..618ee54 100644 --- a/drivers/net/wireless/ath/ath5k/pcu.c +++ b/drivers/net/wireless/ath/ath5k/pcu.c @@ -32,7 +32,7 @@ #include "base.h" /* - * AR5212+ can use higher rates for ack transmition + * AR5212+ can use higher rates for ack transmission * based on current tx rate instead of the base rate. * It does this to better utilize channel usage. * This is a mapping between G rates (that cover both @@ -643,14 +643,14 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) /* Flush any pending BMISS interrupts on ISR by * performing a clear-on-write operation on PISR * register for the BMISS bit (writing a bit on - * ISR togles a reset for that bit and leaves - * the rest bits intact) */ + * ISR toggles a reset for that bit and leaves + * the remaining bits intact) */ if (ah->ah_version == AR5K_AR5210) ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_ISR); else ath5k_hw_reg_write(ah, AR5K_ISR_BMISS, AR5K_PISR); - /* TODO: Set enchanced sleep registers on AR5212 + /* TODO: Set enhanced sleep registers on AR5212 * based on vif->bss_conf params, until then * disable power save reporting.*/ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_PWR_SV); @@ -738,7 +738,7 @@ ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval) dma = ath5k_hw_reg_read(ah, AR5K_TIMER1) >> 3; /* NOTE: SWBA is different. Having a wrong window there does not - * stop us from sending data and this condition is catched thru + * stop us from sending data and this condition is caught by * other means (SWBA interrupt) */ if (ath5k_check_timer_win(nbtt, atim, 1, intval) && @@ -896,7 +896,7 @@ void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode, /* Set RSSI/BRSSI thresholds * * Note: If we decide to set this value - * dynamicaly, have in mind that when AR5K_RSSI_THR + * dynamically, have in mind that when AR5K_RSSI_THR * register is read it might return 0x40 if we haven't * wrote anything to it plus BMISS RSSI threshold is zeroed. * So doing a save/restore procedure here isn't the right diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 7e28676..e00ab5a 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -363,7 +363,7 @@ int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah) return 0; } -/* Schedule a gain probe check on the next transmited packet. +/* Schedule a gain probe check on the next transmitted packet. * That means our next packet is going to be sent with lower * tx power and a Peak to Average Power Detector (PAPD) will try * to measure the gain. @@ -620,7 +620,7 @@ enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah) /* Check if measurement is ok and if we need * to adjust gain, schedule a gain adjustment, - * else switch back to the acive state */ + * else switch back to the active state */ if (ath5k_hw_rf_check_gainf_readback(ah) && AR5K_GAIN_CHECK_ADJUST(&ah->ah_gain) && ath5k_hw_rf_gainf_adjust(ah)) { @@ -807,7 +807,7 @@ static int ath5k_hw_rfregs_init(struct ath5k_hw *ah, * use b_OB and b_DB parameters stored * in eeprom on ee->ee_ob[ee_mode][0] * - * For all other chips we use OB/DB for 2Ghz + * For all other chips we use OB/DB for 2GHz * stored in the b/g modal section just like * 802.11a on ee->ee_ob[ee_mode][1] */ if ((ah->ah_radio == AR5K_RF5111) || @@ -1259,7 +1259,7 @@ static int ath5k_hw_channel(struct ath5k_hw *ah, { int ret; /* - * Check bounds supported by the PHY (we don't care about regultory + * Check bounds supported by the PHY (we don't care about regulatory * restrictions at this point). Note: hw_value already has the band * (CHANNEL_2GHZ, or CHANNEL_5GHZ) so we inform ath5k_channel_ok() * of the band by that */ @@ -1815,7 +1815,7 @@ ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, } else if (ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_SPUR_FILT_EN) { - /* Clean up spur mitigation settings and disable fliter */ + /* Clean up spur mitigation settings and disable filter */ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL, AR5K_PHY_BIN_MASK_CTL_RATE, 0); AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_IQ, @@ -2510,8 +2510,8 @@ ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min, s16 max_pwr_idx; s16 min_pwr_idx; s16 mid_pwr_idx = 0; - /* Edge flag turs on the 7nth bit on the PCDAC - * to delcare the higher power curve (force values + /* Edge flag turns on the 7nth bit on the PCDAC + * to declare the higher power curve (force values * to be greater than 64). If we only have one curve * we don't need to set this, if we have 2 curves and * fill the table backwards this can also be used to @@ -2568,7 +2568,7 @@ ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min, } /* Don't go below 1, extrapolate below if we have - * already swithced to the lower power curve -or + * already switched to the lower power curve -or * we only have one curve and edge_flag is zero * anyway */ if (pcdac_tmp[pwr] < 1 && (edge_flag == 0x00)) { @@ -2805,7 +2805,7 @@ ath5k_write_pwr_to_pdadc_table(struct ath5k_hw *ah, u8 ee_mode) /* * This is the main function that uses all of the above * to set PCDAC/PDADC table on hw for the current channel. - * This table is used for tx power calibration on the basband, + * This table is used for tx power calibration on the baseband, * without it we get weird tx power levels and in some cases * distorted spectral mask */ diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h index 994d29a..f5c1000 100644 --- a/drivers/net/wireless/ath/ath5k/reg.h +++ b/drivers/net/wireless/ath/ath5k/reg.h @@ -170,7 +170,7 @@ #define AR5K_TXCFG_SDMAMR_S 0 #define AR5K_TXCFG_B_MODE 0x00000008 /* Set b mode for 5111 (enable 2111) */ #define AR5K_TXCFG_TXFSTP 0x00000008 /* TX DMA full Stop [5210] */ -#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Triger level mask */ +#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Trigger level mask */ #define AR5K_TXCFG_TXFULL_S 4 #define AR5K_TXCFG_TXFULL_0B 0x00000000 #define AR5K_TXCFG_TXFULL_64B 0x00000010 @@ -283,16 +283,16 @@ */ #define AR5K_ISR 0x001c /* Register Address [5210] */ #define AR5K_PISR 0x0080 /* Register Address [5211+] */ -#define AR5K_ISR_RXOK 0x00000001 /* Frame successfuly received */ +#define AR5K_ISR_RXOK 0x00000001 /* Frame successfully received */ #define AR5K_ISR_RXDESC 0x00000002 /* RX descriptor request */ #define AR5K_ISR_RXERR 0x00000004 /* Receive error */ #define AR5K_ISR_RXNOFRM 0x00000008 /* No frame received (receive timeout) */ #define AR5K_ISR_RXEOL 0x00000010 /* Empty RX descriptor */ #define AR5K_ISR_RXORN 0x00000020 /* Receive FIFO overrun */ -#define AR5K_ISR_TXOK 0x00000040 /* Frame successfuly transmited */ +#define AR5K_ISR_TXOK 0x00000040 /* Frame successfully transmitted */ #define AR5K_ISR_TXDESC 0x00000080 /* TX descriptor request */ #define AR5K_ISR_TXERR 0x00000100 /* Transmit error */ -#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout) */ +#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout) */ #define AR5K_ISR_TXEOL 0x00000400 /* Empty TX descriptor */ #define AR5K_ISR_TXURN 0x00000800 /* Transmit FIFO underrun */ #define AR5K_ISR_MIB 0x00001000 /* Update MIB counters */ @@ -377,16 +377,16 @@ */ #define AR5K_IMR 0x0020 /* Register Address [5210] */ #define AR5K_PIMR 0x00a0 /* Register Address [5211+] */ -#define AR5K_IMR_RXOK 0x00000001 /* Frame successfuly received*/ +#define AR5K_IMR_RXOK 0x00000001 /* Frame successfully received*/ #define AR5K_IMR_RXDESC 0x00000002 /* RX descriptor request*/ #define AR5K_IMR_RXERR 0x00000004 /* Receive error*/ #define AR5K_IMR_RXNOFRM 0x00000008 /* No frame received (receive timeout)*/ #define AR5K_IMR_RXEOL 0x00000010 /* Empty RX descriptor*/ #define AR5K_IMR_RXORN 0x00000020 /* Receive FIFO overrun*/ -#define AR5K_IMR_TXOK 0x00000040 /* Frame successfuly transmited*/ +#define AR5K_IMR_TXOK 0x00000040 /* Frame successfully transmitted*/ #define AR5K_IMR_TXDESC 0x00000080 /* TX descriptor request*/ #define AR5K_IMR_TXERR 0x00000100 /* Transmit error*/ -#define AR5K_IMR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout)*/ +#define AR5K_IMR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout)*/ #define AR5K_IMR_TXEOL 0x00000400 /* Empty TX descriptor*/ #define AR5K_IMR_TXURN 0x00000800 /* Transmit FIFO underrun*/ #define AR5K_IMR_MIB 0x00001000 /* Update MIB counters*/ @@ -601,7 +601,7 @@ * QCU misc registers */ #define AR5K_QCU_MISC_BASE 0x09c0 /* Register Address -Queue0 MISC */ -#define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame sheduling mask */ +#define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame scheduling mask */ #define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */ #define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */ #define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated */ @@ -653,13 +653,13 @@ * registers [5211+] * * These registers control the various characteristics of each queue - * for 802.11e (WME) combatibility so they go together with + * for 802.11e (WME) compatibility so they go together with * QCU registers in pairs. For each queue we have a QCU mask register, * (0x1000 - 0x102c), a local-IFS settings register (0x1040 - 0x106c), * a retry limit register (0x1080 - 0x10ac), a channel time register * (0x10c0 - 0x10ec), a misc-settings register (0x1100 - 0x112c) and * a sequence number register (0x1140 - 0x116c). It seems that "global" - * registers here afect all queues (see use of DCU_GBL_IFS_SLOT in ar5k). + * registers here affect all queues (see use of DCU_GBL_IFS_SLOT in ar5k). * We use the same macros here for easier register access. * */ @@ -779,7 +779,7 @@ * and it's used for generating pseudo-random * number sequences. * - * (If i understand corectly, random numbers are + * (If i understand correctly, random numbers are * used for idle sensing -multiplied with cwmin/max etc-) */ #define AR5K_DCU_GBL_IFS_MISC 0x10f0 /* Register Address */ @@ -1007,7 +1007,7 @@ #define AR5K_PCIE_WAEN 0x407c /* - * PCI-E Serializer/Desirializer + * PCI-E Serializer/Deserializer * registers */ #define AR5K_PCIE_SERDES 0x4080 @@ -1227,7 +1227,7 @@ AR5K_USEC_5210 : AR5K_USEC_5211) #define AR5K_USEC_1 0x0000007f /* clock cycles for 1us */ #define AR5K_USEC_1_S 0 -#define AR5K_USEC_32 0x00003f80 /* clock cycles for 1us while on 32Mhz clock */ +#define AR5K_USEC_32 0x00003f80 /* clock cycles for 1us while on 32MHz clock */ #define AR5K_USEC_32_S 7 #define AR5K_USEC_TX_LATENCY_5211 0x007fc000 #define AR5K_USEC_TX_LATENCY_5211_S 14 @@ -1632,7 +1632,7 @@ #define AR5K_SLEEP0_NEXT_DTIM 0x0007ffff /* Mask for next DTIM (?) */ #define AR5K_SLEEP0_NEXT_DTIM_S 0 #define AR5K_SLEEP0_ASSUME_DTIM 0x00080000 /* Assume DTIM */ -#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 /* Enable enchanced sleep control */ +#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 /* Enable enhanced sleep control */ #define AR5K_SLEEP0_CABTO 0xff000000 /* Mask for CAB Time Out */ #define AR5K_SLEEP0_CABTO_S 24 @@ -1657,7 +1657,7 @@ /* * TX power control (TPC) register * - * XXX: PCDAC steps (0.5dbm) or DBM ? + * XXX: PCDAC steps (0.5dBm) or dBm ? * */ #define AR5K_TXPC 0x80e8 /* Register Address */ @@ -1673,7 +1673,7 @@ /* * Profile count registers * - * These registers can be cleared and freezed with ATH5K_MIBC, but they do not + * These registers can be cleared and frozen with ATH5K_MIBC, but they do not * generate a MIB interrupt. * Instead of overflowing, they shift by one bit to the right. All registers * shift together, i.e. when one reaches the max, all shift at the same time by @@ -1838,7 +1838,7 @@ #define AR5K_PHY_TST2_TRIG_SEL 0x00000007 /* Trigger select (?)*/ #define AR5K_PHY_TST2_TRIG 0x00000010 /* Trigger (?) */ #define AR5K_PHY_TST2_CBUS_MODE 0x00000060 /* Cardbus mode (?) */ -#define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32Khz external) */ +#define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32kHz external) */ #define AR5K_PHY_TST2_CHANCOR_DUMP_EN 0x00000800 /* Enable Chancor dump (?) */ #define AR5K_PHY_TST2_EVEN_CHANCOR_DUMP 0x00001000 /* Even Chancor dump (?) */ #define AR5K_PHY_TST2_RFSILENT_EN 0x00002000 /* Enable RFSILENT */ @@ -2002,7 +2002,7 @@ #define AR5K_PHY_AGCCTL_OFDM_DIV_DIS 0x00000008 /* Disable antenna diversity on OFDM modes */ #define AR5K_PHY_AGCCTL_NF_EN 0x00008000 /* Enable nf calibration to happen (?) */ #define AR5K_PHY_AGCTL_FLTR_CAL 0x00010000 /* Allow filter calibration (?) */ -#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automaticaly */ +#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automatically */ /* * PHY noise floor status register (CCA = Clear Channel Assessment) @@ -2089,7 +2089,7 @@ * * It's obvious from the code that 0x989c is the buffer register but * for the other special registers that we write to after sending each - * packet, i have no idea. So i'll name them BUFFER_CONTROL_X registers + * packet, i have no idea. So I'll name them BUFFER_CONTROL_X registers * for now. It's interesting that they are also used for some other operations. */ @@ -2340,7 +2340,7 @@ #define AR5K_PHY_RESTART_DIV_GC_S 18 /* - * RF Bus access request register (for synth-oly channel switching) + * RF Bus access request register (for synth-only channel switching) */ #define AR5K_PHY_RFBUS_REQ 0x997C #define AR5K_PHY_RFBUS_REQ_REQUEST 0x00000001 @@ -2382,7 +2382,7 @@ */ #define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */ #define AR5K_BB_GAIN(_n) (AR5K_BB_GAIN_BASE + ((_n) << 2)) -#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplrifier Gain table base address */ +#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplifier Gain table base address */ #define AR5K_RF_GAIN(_n) (AR5K_RF_GAIN_BASE + ((_n) << 2)) /* diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c index 19aefdb..57f2e56 100644 --- a/drivers/net/wireless/ath/ath5k/reset.c +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -213,7 +213,7 @@ static void ath5k_hw_init_core_clock(struct ath5k_hw *ah) usec_reg = (usec | sclock | txlat | rxlat); ath5k_hw_reg_write(ah, usec_reg, AR5K_USEC); - /* On 5112 set tx frane to tx data start delay */ + /* On 5112 set tx frame to tx data start delay */ if (ah->ah_radio == AR5K_RF5112) { AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL2, AR5K_PHY_RF_CTL2_TXF2TXD_START, @@ -539,7 +539,7 @@ int ath5k_hw_on_hold(struct ath5k_hw *ah) * * Note: putting PCI core on warm reset on PCI-E cards * results card to hang and always return 0xffff... so - * we ingore that flag for PCI-E cards. On PCI cards + * we ignore that flag for PCI-E cards. On PCI cards * this flag gets cleared after 64 PCI clocks. */ bus_flags = (pdev && pci_is_pcie(pdev)) ? 0 : AR5K_RESET_CTL_PCI; @@ -596,7 +596,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) * * Note: putting PCI core on warm reset on PCI-E cards * results card to hang and always return 0xffff... so - * we ingore that flag for PCI-E cards. On PCI cards + * we ignore that flag for PCI-E cards. On PCI cards * this flag gets cleared after 64 PCI clocks. */ bus_flags = (pdev && pci_is_pcie(pdev)) ? 0 : AR5K_RESET_CTL_PCI; @@ -627,7 +627,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) return ret; } - /* ...reset configuration regiter on Wisoc ... + /* ...reset configuration register on Wisoc ... * ...clear reset control register and pull device out of * warm reset on others */ if (ath5k_get_bus_type(ah) == ATH_AHB) @@ -704,7 +704,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) /*XXX: Can bwmode be used with dynamic mode ? * (I don't think it supports 44MHz) */ - /* On 2425 initvals TURBO_SHORT is not pressent */ + /* On 2425 initvals TURBO_SHORT is not present */ if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) { turbo = AR5K_PHY_TURBO_MODE | (ah->ah_radio == AR5K_RF2425) ? 0 : diff --git a/drivers/net/wireless/ath/ath5k/rfgain.h b/drivers/net/wireless/ath/ath5k/rfgain.h index 70c9a45..ebfae05 100644 --- a/drivers/net/wireless/ath/ath5k/rfgain.h +++ b/drivers/net/wireless/ath/ath5k/rfgain.h @@ -30,7 +30,7 @@ struct ath5k_ini_rfgain { /* Initial RF Gain settings for RF5111 */ static const struct ath5k_ini_rfgain rfgain_5111[] = { - /* 5Ghz 2Ghz */ + /* 5GHz 2GHz */ { AR5K_RF_GAIN(0), { 0x000001a9, 0x00000000 } }, { AR5K_RF_GAIN(1), { 0x000001e9, 0x00000040 } }, { AR5K_RF_GAIN(2), { 0x00000029, 0x00000080 } }, @@ -99,7 +99,7 @@ static const struct ath5k_ini_rfgain rfgain_5111[] = { /* Initial RF Gain settings for RF5112 */ static const struct ath5k_ini_rfgain rfgain_5112[] = { - /* 5Ghz 2Ghz */ + /* 5GHz 2GHz */ { AR5K_RF_GAIN(0), { 0x00000007, 0x00000007 } }, { AR5K_RF_GAIN(1), { 0x00000047, 0x00000047 } }, { AR5K_RF_GAIN(2), { 0x00000087, 0x00000087 } }, @@ -305,7 +305,7 @@ static const struct ath5k_ini_rfgain rfgain_2316[] = { /* Initial RF Gain settings for RF5413 */ static const struct ath5k_ini_rfgain rfgain_5413[] = { - /* 5Ghz 2Ghz */ + /* 5GHz 2GHz */ { AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } }, { AR5K_RF_GAIN(1), { 0x00000040, 0x00000040 } }, { AR5K_RF_GAIN(2), { 0x00000080, 0x00000080 } }, -- 2.7.4