From 695cb117ac2a3624eb4381c271a0376d9233df44 Mon Sep 17 00:00:00 2001 From: Chanh Nguyen Date: Tue, 28 Feb 2023 17:28:20 +0700 Subject: [PATCH] ARM: dts: aspeed: mtmitchell: Enable NCSI Use MAC3 (RGMII4) with the NC-SI stack instead of as an MDIO PHY. The OCP slot #0 and OCP slot #1 use a common BMC_NCSI signal, so we use only one of them at a time. The OCP slot #0 will be enabled by PCA9539's setting by default. Enable the OCP Auxiliary Power during booting to make the NCSI feature work. Signed-off-by: Chanh Nguyen Reviewed-by: Joel Stanley Link: https://lore.kernel.org/r/20230228102820.18477-1-chanh@os.amperecomputing.com Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 37 +++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts index 4b91600..1e0e884 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts @@ -251,6 +251,14 @@ pinctrl-0 = <&pinctrl_rgmii1_default>; }; +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + &fmc { status = "okay"; flash@0 { @@ -439,6 +447,26 @@ status = "okay"; }; +&i2c8 { + status = "okay"; + + gpio@77 { + compatible = "nxp,pca9539"; + reg = <0x77>; + gpio-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <2>; + + bmc-ocp0-en-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_LOW>; + output-high; + line-name = "bmc-ocp0-en-n"; + }; + }; +}; + &i2c9 { status = "okay"; }; @@ -530,13 +558,20 @@ /*V0-V7*/ "s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n", "host0-reboot-ack-n","host0-ready","host0-shd-req-n", "host0-shd-ack-n","s0-overtemp-n", - /*W0-W7*/ "ocp-aux-pwren","ocp-main-pwren","ocp-pgood","", + /*W0-W7*/ "","ocp-main-pwren","ocp-pgood","", "bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel", /*X0-X7*/ "i2c-backup-sel","s1-fault-alert","s1-fw-boot-ok", "s1-hightemp-n","s0-spi-auth-fail-n","s1-sys-auth-failure-n", "s1-overtemp-n","s1-spi-auth-fail-n", /*Y0-Y7*/ "","","","","","","","host0-special-boot", /*Z0-Z7*/ "reset-button","ps0-pgood","ps1-pgood","","","","",""; + + ocp-aux-pwren-hog { + gpio-hog; + gpios = ; + output-high; + line-name = "ocp-aux-pwren"; + }; }; &gpio1 { -- 2.7.4