From 693765021460f19c5d7c638eb76e2efe1cd84752 Mon Sep 17 00:00:00 2001 From: Linas Vepstas Date: Thu, 3 Nov 2005 18:47:50 -0600 Subject: [PATCH] [PATCH] ppc64: misc minor cleanup 02-eeh-minor-cleanup.patch This patch performs some minor cleanup of the eeh.c file, including: -- trim some trailing whitespace -- remove extraneous #includes -- use the macro PCI_DN uniformly, instead of the void pointer chase. -- typos in comments -- improved debug printk's Signed-off-by: Linas Vepstas Signed-off-by: Paul Mackerras --- arch/ppc64/kernel/eeh.c | 53 +++++++++++++++++++++++-------------------------- 1 file changed, 25 insertions(+), 28 deletions(-) diff --git a/arch/ppc64/kernel/eeh.c b/arch/ppc64/kernel/eeh.c index eedf21d..bb11569 100644 --- a/arch/ppc64/kernel/eeh.c +++ b/arch/ppc64/kernel/eeh.c @@ -1,32 +1,31 @@ /* * eeh.c * Copyright (C) 2001 Dave Engebretsen & Todd Inglett IBM Corporation - * + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include #include #include -#include #include #include #include #include #include #include +#include #include #include #include @@ -49,8 +48,8 @@ * were "empty": all reads return 0xff's and all writes are silently * ignored. EEH slot isolation events can be triggered by parity * errors on the address or data busses (e.g. during posted writes), - * which in turn might be caused by dust, vibration, humidity, - * radioactivity or plain-old failed hardware. + * which in turn might be caused by low voltage on the bus, dust, + * vibration, humidity, radioactivity or plain-old failed hardware. * * Note, however, that one of the leading causes of EEH slot * freeze events are buggy device drivers, buggy device microcode, @@ -256,18 +255,17 @@ static void __pci_addr_cache_insert_device(struct pci_dev *dev) dn = pci_device_to_OF_node(dev); if (!dn) { - printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n", - pci_name(dev)); + printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n", pci_name(dev)); return; } /* Skip any devices for which EEH is not enabled. */ - pdn = dn->data; + pdn = PCI_DN(dn); if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) || pdn->eeh_mode & EEH_MODE_NOCHECK) { #ifdef DEBUG - printk(KERN_INFO "PCI: skip building address cache for=%s\n", - pci_name(dev)); + printk(KERN_INFO "PCI: skip building address cache for=%s - %s\n", + pci_name(dev), pdn->node->full_name); #endif return; } @@ -410,16 +408,16 @@ int eeh_unregister_notifier(struct notifier_block *nb) * @dn: device node to read * @rets: array to return results in */ -static int read_slot_reset_state(struct device_node *dn, int rets[]) +static int read_slot_reset_state(struct pci_dn *pdn, int rets[]) { int token, outputs; - struct pci_dn *pdn = dn->data; if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) { token = ibm_read_slot_reset_state2; outputs = 4; } else { token = ibm_read_slot_reset_state; + rets[2] = 0; /* fake PE Unavailable info */ outputs = 3; } @@ -496,7 +494,7 @@ static void eeh_event_handler(void *dummy) /** * eeh_token_to_phys - convert EEH address token to phys address - * @token i/o token, should be address in the form 0xE.... + * @token i/o token, should be address in the form 0xA.... */ static inline unsigned long eeh_token_to_phys(unsigned long token) { @@ -522,7 +520,7 @@ static inline unsigned long eeh_token_to_phys(unsigned long token) * will query firmware for the EEH status. * * Returns 0 if there has not been an EEH error; otherwise returns - * a non-zero value and queues up a solt isolation event notification. + * a non-zero value and queues up a slot isolation event notification. * * It is safe to call this routine in an interrupt context. */ @@ -542,7 +540,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) if (!dn) return 0; - pdn = dn->data; + pdn = PCI_DN(dn); /* Access to IO BARs might get this far and still not want checking. */ if (!pdn->eeh_capable || !(pdn->eeh_mode & EEH_MODE_SUPPORTED) || @@ -562,7 +560,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) atomic_inc(&eeh_fail_count); if (atomic_read(&eeh_fail_count) >= EEH_MAX_FAILS) { /* re-read the slot reset state */ - if (read_slot_reset_state(dn, rets) != 0) + if (read_slot_reset_state(pdn, rets) != 0) rets[0] = -1; /* reset state unknown */ eeh_panic(dev, rets[0]); } @@ -576,7 +574,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) * function zero of a multi-function device. * In any case they must share a common PHB. */ - ret = read_slot_reset_state(dn, rets); + ret = read_slot_reset_state(pdn, rets); if (!(ret == 0 && rets[1] == 1 && (rets[0] == 2 || rets[0] == 4))) { __get_cpu_var(false_positives)++; return 0; @@ -635,7 +633,6 @@ EXPORT_SYMBOL(eeh_dn_check_failure); * @token i/o token, should be address in the form 0xA.... * @val value, should be all 1's (XXX why do we need this arg??) * - * Check for an eeh failure at the given token address. * Check for an EEH failure at the given token address. Call this * routine if the result of a read was all 0xff's and you want to * find out if this is due to an EEH slot freeze event. This routine @@ -680,7 +677,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data) u32 *device_id = (u32 *)get_property(dn, "device-id", NULL); u32 *regs; int enable; - struct pci_dn *pdn = dn->data; + struct pci_dn *pdn = PCI_DN(dn); pdn->eeh_mode = 0; @@ -732,7 +729,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data) /* This device doesn't support EEH, but it may have an * EEH parent, in which case we mark it as supported. */ - if (dn->parent && dn->parent->data + if (dn->parent && PCI_DN(dn->parent) && (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) { /* Parent supports EEH. */ pdn->eeh_mode |= EEH_MODE_SUPPORTED; @@ -745,7 +742,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data) dn->full_name); } - return NULL; + return NULL; } /* @@ -793,13 +790,11 @@ void __init eeh_init(void) for (phb = of_find_node_by_name(NULL, "pci"); phb; phb = of_find_node_by_name(phb, "pci")) { unsigned long buid; - struct pci_dn *pci; buid = get_phb_buid(phb); - if (buid == 0 || phb->data == NULL) + if (buid == 0 || PCI_DN(phb) == NULL) continue; - pci = phb->data; info.buid_lo = BUID_LO(buid); info.buid_hi = BUID_HI(buid); traverse_pci_devices(phb, early_enable_eeh, &info); @@ -828,11 +823,13 @@ void eeh_add_device_early(struct device_node *dn) struct pci_controller *phb; struct eeh_early_enable_info info; - if (!dn || !dn->data) + if (!dn || !PCI_DN(dn)) return; phb = PCI_DN(dn)->phb; if (NULL == phb || 0 == phb->buid) { - printk(KERN_WARNING "EEH: Expected buid but found none\n"); + printk(KERN_WARNING "EEH: Expected buid but found none for %s\n", + dn->full_name); + dump_stack(); return; } -- 2.7.4