From 68905a14e49c97bf49dacd753e40ddd5b254e2ad Mon Sep 17 00:00:00 2001 From: David Kershner Date: Mon, 15 Jun 2015 23:31:59 -0400 Subject: [PATCH] staging: unisys: Add s-Par visornic ethernet driver This driver creates a network device when s-Par sends a device create message to create network adapter on the visorbus. When the message is received by visorbus, the visornic_probe function is called and the netdev device is created and managed by the visornic driver. Signed-off-by: David Kershner Signed-off-by: Benjamin Romer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/unisys/Kconfig | 1 + drivers/staging/unisys/Makefile | 1 + drivers/staging/unisys/visornic/Kconfig | 15 + drivers/staging/unisys/visornic/Makefile | 10 + drivers/staging/unisys/visornic/visornic_main.c | 2140 +++++++++++++++++++++++ 5 files changed, 2167 insertions(+) create mode 100644 drivers/staging/unisys/visornic/Kconfig create mode 100644 drivers/staging/unisys/visornic/Makefile create mode 100644 drivers/staging/unisys/visornic/visornic_main.c diff --git a/drivers/staging/unisys/Kconfig b/drivers/staging/unisys/Kconfig index 0c3e9a1..778f9d0 100644 --- a/drivers/staging/unisys/Kconfig +++ b/drivers/staging/unisys/Kconfig @@ -12,5 +12,6 @@ menuconfig UNISYSSPAR if UNISYSSPAR source "drivers/staging/unisys/visorbus/Kconfig" +source "drivers/staging/unisys/visornic/Kconfig" endif # UNISYSSPAR diff --git a/drivers/staging/unisys/Makefile b/drivers/staging/unisys/Makefile index 566af8e..a515ebc 100644 --- a/drivers/staging/unisys/Makefile +++ b/drivers/staging/unisys/Makefile @@ -2,3 +2,4 @@ # Makefile for Unisys SPAR drivers # obj-$(CONFIG_UNISYS_VISORBUS) += visorbus/ +obj-$(CONFIG_UNISYS_VISORNIC) += visornic/ diff --git a/drivers/staging/unisys/visornic/Kconfig b/drivers/staging/unisys/visornic/Kconfig new file mode 100644 index 0000000..1676dc7 --- /dev/null +++ b/drivers/staging/unisys/visornic/Kconfig @@ -0,0 +1,15 @@ +# +# Unisys visornic configuration +# + +config UNISYS_VISORNIC + tristate "Unisys visornic driver" + depends on UNISYSSPAR && UNISYS_VISORBUS && NET + ---help--- + The Unisys Visornic driver provides support for s-Par network + devices exposed on the s-Par visorbus. When a message is sent + to visorbus to create a network device, the probe function of + visornic is called to create the netdev device. Networking on + s-Par switches will not work if this driver is not selected. + If you say Y here, you will enable the Unisys visornic driver. + diff --git a/drivers/staging/unisys/visornic/Makefile b/drivers/staging/unisys/visornic/Makefile new file mode 100644 index 0000000..439e95e --- /dev/null +++ b/drivers/staging/unisys/visornic/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for Unisys channel +# + +obj-$(CONFIG_UNISYS_VISORNIC) += visornic.o + +visornic-y := visornic_main.o + +ccflags-y += -Idrivers/staging/unisys/include + diff --git a/drivers/staging/unisys/visornic/visornic_main.c b/drivers/staging/unisys/visornic/visornic_main.c new file mode 100644 index 0000000..7100744 --- /dev/null +++ b/drivers/staging/unisys/visornic/visornic_main.c @@ -0,0 +1,2140 @@ +/* Copyright (c) 2012 - 2015 UNISYS CORPORATION + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + */ + +/* This driver lives in a spar partition, and registers to ethernet io + * channels from the visorbus driver. It creates netdev devices and + * forwards transmit to the IO channel and accepts rcvs from the IO + * Partition via the IO channel. + */ + +#include +#include +#include +#include +#include + +#include "visorbus.h" +#include "iochannel.h" + +#define VISORNIC_INFINITE_RESPONSE_WAIT 0 +#define VISORNICSOPENMAX 32 +#define MAXDEVICES 16384 + +/* MAX_BUF = 64 lines x 32 MAXVNIC x 80 characters + * = 163840 bytes + */ +#define MAX_BUF 163840 + +static spinlock_t dev_num_pool_lock; +static void *dev_num_pool; /**< pool to grab device numbers from */ + +static int visornic_probe(struct visor_device *dev); +static void visornic_remove(struct visor_device *dev); +static int visornic_pause(struct visor_device *dev, + visorbus_state_complete_func complete_func); +static int visornic_resume(struct visor_device *dev, + visorbus_state_complete_func complete_func); + +/* DEBUGFS declarations */ +static ssize_t info_debugfs_read(struct file *file, char __user *buf, + size_t len, loff_t *offset); +static ssize_t enable_ints_write(struct file *file, const char __user *buf, + size_t len, loff_t *ppos); +static struct dentry *visornic_debugfs_dir; +static const struct file_operations debugfs_info_fops = { + .read = info_debugfs_read, +}; + +static const struct file_operations debugfs_enable_ints_fops = { + .write = enable_ints_write, +}; + +static struct workqueue_struct *visornic_serverdown_workqueue; +static struct workqueue_struct *visornic_timeout_reset_workqueue; + +/* GUIDS for director channel type supported by this driver. */ +static struct visor_channeltype_descriptor visornic_channel_types[] = { + /* Note that the only channel type we expect to be reported by the + * bus driver is the SPAR_VNIC channel. + */ + { SPAR_VNIC_CHANNEL_PROTOCOL_UUID, "ultravnic" }, + { NULL_UUID_LE, NULL } +}; + +/* This is used to tell the visor bus driver which types of visor devices + * we support, and what functions to call when a visor device that we support + * is attached or removed. + */ +static struct visor_driver visornic_driver = { + .name = "visornic", + .version = "1.0.0.0", + .vertag = NULL, + .owner = THIS_MODULE, + .channel_types = visornic_channel_types, + .probe = visornic_probe, + .remove = visornic_remove, + .pause = visornic_pause, + .resume = visornic_resume, + .channel_interrupt = NULL, +}; + +struct visor_thread_info { + struct task_struct *task; + struct completion has_stopped; + int id; +}; + +struct chanstat { + unsigned long got_rcv; + unsigned long got_enbdisack; + unsigned long got_xmit_done; + unsigned long xmit_fail; + unsigned long sent_enbdis; + unsigned long sent_promisc; + unsigned long sent_post; + unsigned long sent_xmit; + unsigned long reject_count; + unsigned long extra_rcvbufs_sent; +}; + +struct visornic_devdata { + int devnum; + int thread_wait_ms; + unsigned short enabled; /* 0 disabled 1 enabled to receive */ + unsigned short enab_dis_acked; /* NET_RCV_ENABLE/DISABLE acked by + * IOPART + */ + struct visor_device *dev; + char name[99]; + struct list_head list_all; /* < link within list_all_devices list */ + struct kref kref; + struct net_device *netdev; + struct net_device_stats net_stats; + atomic_t interrupt_rcvd; + wait_queue_head_t rsp_queue; + struct sk_buff **rcvbuf; + u64 uniquenum; /* TODO figure out why not used */ + unsigned short old_flags; /* flags as they were prior to + * set_multicast_list + */ + atomic_t usage; /* count of users */ + int num_rcv_bufs; /* indicates how many rcv buffers + * the vnic will post + */ + int num_rcv_bufs_could_not_alloc; + atomic_t num_rcvbuf_in_iovm; + unsigned long alloc_failed_in_if_needed_cnt; + unsigned long alloc_failed_in_repost_rtn_cnt; + int max_outstanding_net_xmits; /* absolute max number of outstanding + * xmits - should never hit this + */ + int upper_threshold_net_xmits; /* high water mark for calling + * netif_stop_queue() + */ + int lower_threshold_net_xmits; /* high water mark for calling + * netif_wake_queue() + */ + struct sk_buff_head xmitbufhead; /* xmitbufhead is the head of the + * xmit buffer list that have been + * sent to the IOPART end + */ + struct work_struct serverdown_completion; + struct work_struct timeout_reset; + struct uiscmdrsp *cmdrsp_rcv; /* cmdrsp_rcv is used for + * posting/unposting rcv buffers + */ + struct uiscmdrsp *xmit_cmdrsp; /* used to issue NET_XMIT - there is + * never more that one xmit in + * progress at a time + */ + bool server_down; /* IOPART is down */ + bool server_change_state; /* Processing SERVER_CHANGESTATE msg */ + struct dentry *eth_debugfs_dir; + struct visor_thread_info threadinfo; + u64 interrupts_rcvd; + u64 interrupts_notme; + u64 interrupts_disabled; + u64 busy_cnt; + spinlock_t priv_lock; /* spinlock to access devdata structures */ + + /* flow control counter */ + u64 flow_control_upper_hits; + u64 flow_control_lower_hits; + + /* debug counters */ + unsigned long n_rcv0; /* # rcvs of 0 buffers */ + unsigned long n_rcv1; /* # rcvs of 1 buffers */ + unsigned long n_rcv2; /* # rcvs of 2 buffers */ + unsigned long n_rcvx; /* # rcvs of >2 buffers */ + unsigned long found_repost_rcvbuf_cnt; /* # times we called + * repost_rcvbuf_cnt + */ + unsigned long repost_found_skb_cnt; /* # times found the skb */ + unsigned long n_repost_deficit; /* # times we couldn't find + * all of the rcv buffers + */ + unsigned long bad_rcv_buf; /* # times we negleted to + * free the rcv skb because + * we didn't know where it + * came from + */ + unsigned long n_rcv_packets_not_accepted;/* # bogs rcv packets */ + + int queuefullmsg_logged; + struct chanstat chstat; +}; + +/* array of open devices maintained by open() and close() */ +static struct net_device *num_visornic_open[VISORNICSOPENMAX]; + +/* List of all visornic_devdata structs, + * linked via the list_all member + */ +static LIST_HEAD(list_all_devices); +static DEFINE_SPINLOCK(lock_all_devices); + +/** + * visor_copy_fragsinfo_from_skb( + * @skb_in: skbuff that we are pulling the frags from + * @firstfraglen: length of first fragment in skb + * @frags_max: max len of frags array + * @frags: frags array filled in on output + * + * Copy the fragment list in the SKB to a phys_info + * array that the IOPART understands. + * Return value indicates number of entries filled in frags + * Negative values indicate an error. + */ +static unsigned int +visor_copy_fragsinfo_from_skb(struct sk_buff *skb, unsigned int firstfraglen, + unsigned int frags_max, + struct phys_info frags[]) +{ + unsigned int count = 0, ii, size, offset = 0, numfrags; + + numfrags = skb_shinfo(skb)->nr_frags; + + while (firstfraglen) { + if (count == frags_max) + return -EINVAL; + + frags[count].pi_pfn = + page_to_pfn(virt_to_page(skb->data + offset)); + frags[count].pi_off = + (unsigned long)(skb->data + offset) & PI_PAGE_MASK; + size = min_t(unsigned int, firstfraglen, + PI_PAGE_SIZE - frags[count].pi_off); + + /* can take smallest of firstfraglen (what's left) OR + * bytes left in the page + */ + frags[count].pi_len = size; + firstfraglen -= size; + offset += size; + count++; + } + if (numfrags) { + if ((count + numfrags) > frags_max) + return -EINVAL; + + for (ii = 0; ii < numfrags; ii++) { + count = add_physinfo_entries(page_to_pfn( + skb_frag_page(&skb_shinfo(skb)->frags[ii])), + skb_shinfo(skb)->frags[ii]. + page_offset, + skb_shinfo(skb)->frags[ii]. + size, count, frags_max, frags); + if (!count) + return -EIO; + } + } + if (skb_shinfo(skb)->frag_list) { + struct sk_buff *skbinlist; + int c; + + for (skbinlist = skb_shinfo(skb)->frag_list; skbinlist; + skbinlist = skbinlist->next) { + c = visor_copy_fragsinfo_from_skb(skbinlist, + skbinlist->len - + skbinlist->data_len, + frags_max - count, + &frags[count]); + if (c < 0) + return c; + count += c; + } + } + return count; +} + +/** + * visort_thread_start - starts thread for the device + * @thrinfo: The thread to start + * @threadfn: Function the thread starts + * @thrcontext: Context to pass to the thread, i.e. devdata + * @name: string describing name of thread + * + * Starts a thread for the device, currently only thread is + * process_incoming_rsps + * Returns 0 on success; + */ +static int visor_thread_start(struct visor_thread_info *thrinfo, + int (*threadfn)(void *), + void *thrcontext, char *name) +{ + /* used to stop the thread */ + init_completion(&thrinfo->has_stopped); + thrinfo->task = kthread_run(threadfn, thrcontext, name); + if (IS_ERR(thrinfo->task)) { + thrinfo->id = 0; + return -EINVAL; + } + thrinfo->id = thrinfo->task->pid; + return 0; +} + +/** + * visor_thread_stop - stop a thread for the device + * @thrinfo: The thread to stop + * + * Stop the thread and wait for completion for a minute + * Returns void. + */ +static void visor_thread_stop(struct visor_thread_info *thrinfo) +{ + if (!thrinfo->id) + return; /* thread not running */ + + kthread_stop(thrinfo->task); + /* give up if the thread has NOT died in 1 minute */ + if (wait_for_completion_timeout(&thrinfo->has_stopped, 60 * HZ)) + thrinfo->id = 0; +} + +/* DebugFS code */ +static ssize_t info_debugfs_read(struct file *file, char __user *buf, + size_t len, loff_t *offset) +{ + int i; + ssize_t bytes_read = 0; + int str_pos = 0; + struct visornic_devdata *devdata; + char *vbuf; + + if (len > MAX_BUF) + len = MAX_BUF; + vbuf = kzalloc(len, GFP_KERNEL); + if (!vbuf) + return -ENOMEM; + + /* for each vnic channel + * dump out channel specific data + */ + for (i = 0; i < VISORNICSOPENMAX; i++) { + if (!num_visornic_open[i]) + continue; + + devdata = netdev_priv(num_visornic_open[i]); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + "Vnic i = %d\n", i); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + "netdev = %s (0x%p), MAC Addr %pM\n", + num_visornic_open[i]->name, + num_visornic_open[i], + num_visornic_open[i]->dev_addr); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + "VisorNic Dev Info = 0x%p\n", devdata); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " num_rcv_bufs = %d\n", + devdata->num_rcv_bufs); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " max_oustanding_next_xmits = %d\n", + devdata->max_outstanding_net_xmits); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " upper_threshold_net_xmits = %d\n", + devdata->upper_threshold_net_xmits); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " lower_threshold_net_xmits = %d\n", + devdata->lower_threshold_net_xmits); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " queuefullmsg_logged = %d\n", + devdata->queuefullmsg_logged); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " chstat.got_rcv = %lu\n", + devdata->chstat.got_rcv); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " chstat.got_enbdisack = %lu\n", + devdata->chstat.got_enbdisack); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " chstat.got_xmit_done = %lu\n", + devdata->chstat.got_xmit_done); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " chstat.xmit_fail = %lu\n", + devdata->chstat.xmit_fail); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " chstat.sent_enbdis = %lu\n", + devdata->chstat.sent_enbdis); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " chstat.sent_promisc = %lu\n", + devdata->chstat.sent_promisc); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " chstat.sent_post = %lu\n", + devdata->chstat.sent_post); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " chstat.sent_xmit = %lu\n", + devdata->chstat.sent_xmit); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " chstat.reject_count = %lu\n", + devdata->chstat.reject_count); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " chstat.extra_rcvbufs_sent = %lu\n", + devdata->chstat.extra_rcvbufs_sent); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " n_rcv0 = %lu\n", devdata->n_rcv0); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " n_rcv1 = %lu\n", devdata->n_rcv1); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " n_rcv2 = %lu\n", devdata->n_rcv2); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " n_rcvx = %lu\n", devdata->n_rcvx); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " num_rcvbuf_in_iovm = %d\n", + atomic_read(&devdata->num_rcvbuf_in_iovm)); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " alloc_failed_in_if_needed_cnt = %lu\n", + devdata->alloc_failed_in_if_needed_cnt); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " alloc_failed_in_repost_rtn_cnt = %lu\n", + devdata->alloc_failed_in_repost_rtn_cnt); + /* str_pos += scnprintf(vbuf + str_pos, len - str_pos, + * " inner_loop_limit_reached_cnt = %lu\n", + * devdata->inner_loop_limit_reached_cnt); + */ + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " found_repost_rcvbuf_cnt = %lu\n", + devdata->found_repost_rcvbuf_cnt); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " repost_found_skb_cnt = %lu\n", + devdata->repost_found_skb_cnt); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " n_repost_deficit = %lu\n", + devdata->n_repost_deficit); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " bad_rcv_buf = %lu\n", + devdata->bad_rcv_buf); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " n_rcv_packets_not_accepted = %lu\n", + devdata->n_rcv_packets_not_accepted); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " interrupts_rcvd = %llu\n", + devdata->interrupts_rcvd); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " interrupts_notme = %llu\n", + devdata->interrupts_notme); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " interrupts_disabled = %llu\n", + devdata->interrupts_disabled); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " busy_cnt = %llu\n", + devdata->busy_cnt); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " flow_control_upper_hits = %llu\n", + devdata->flow_control_upper_hits); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " flow_control_lower_hits = %llu\n", + devdata->flow_control_lower_hits); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " thread_wait_ms = %d\n", + devdata->thread_wait_ms); + str_pos += scnprintf(vbuf + str_pos, len - str_pos, + " netif_queue = %s\n", + netif_queue_stopped(devdata->netdev) ? + "stopped" : "running"); + } + bytes_read = simple_read_from_buffer(buf, len, offset, vbuf, str_pos); + kfree(vbuf); + return bytes_read; +} + +static ssize_t enable_ints_write(struct file *file, + const char __user *buffer, + size_t count, loff_t *ppos) +{ + char buf[4]; + int i, new_value; + struct visornic_devdata *devdata; + + if (count >= ARRAY_SIZE(buf)) + return -EINVAL; + + buf[count] = '\0'; + if (copy_from_user(buf, buffer, count)) + return -EFAULT; + + i = kstrtoint(buf, 10, &new_value); + if (i != 0) + return -EFAULT; + + /* set all counts to new_value usually 0 */ + for (i = 0; i < VISORNICSOPENMAX; i++) { + if (num_visornic_open[i]) { + devdata = netdev_priv(num_visornic_open[i]); + /* TODO update features bit in channel */ + } + } + + return count; +} + +/** + * visornic_serverdown_complete - IOPART went down, need to pause + * device + * @work: Work queue it was scheduled on + * + * The IO partition has gone down and we need to do some cleanup + * for when it comes back. Treat the IO partition as the link + * being down. + * Returns void. + */ +static void +visornic_serverdown_complete(struct work_struct *work) +{ + struct visornic_devdata *devdata; + struct net_device *netdev; + unsigned long flags; + int i = 0, count = 0; + + devdata = container_of(work, struct visornic_devdata, + serverdown_completion); + netdev = devdata->netdev; + + /* Stop using datachan */ + visor_thread_stop(&devdata->threadinfo); + + /* Inform Linux that the link is down */ + netif_carrier_off(netdev); + netif_stop_queue(netdev); + + /* Free the skb for XMITs that haven't been serviced by the server + * We shouldn't have to inform Linux about these IOs because they + * are "lost in the ethernet" + */ + skb_queue_purge(&devdata->xmitbufhead); + + spin_lock_irqsave(&devdata->priv_lock, flags); + /* free rcv buffers */ + for (i = 0; i < devdata->num_rcv_bufs; i++) { + if (devdata->rcvbuf[i]) { + kfree_skb(devdata->rcvbuf[i]); + devdata->rcvbuf[i] = NULL; + count++; + } + } + atomic_set(&devdata->num_rcvbuf_in_iovm, 0); + spin_unlock_irqrestore(&devdata->priv_lock, flags); + + devdata->server_down = true; + devdata->server_change_state = false; +} + +/** + * visornic_serverdown - Command has notified us that IOPARt is down + * @devdata: device that is being managed by IOPART + * + * Schedule the work needed to handle the server down request. Make + * sure we haven't already handled the server change state event. + * Returns 0 if we scheduled the work, -EINVAL on error. + */ +static int +visornic_serverdown(struct visornic_devdata *devdata) +{ + if (!devdata->server_down && !devdata->server_change_state) { + devdata->server_change_state = true; + queue_work(visornic_serverdown_workqueue, + &devdata->serverdown_completion); + } else if (devdata->server_change_state) { + return -EINVAL; + } + return 0; +} + +/** + * alloc_rcv_buf - alloc rcv buffer to be given to the IO Partition. + * @netdev: network adapter the rcv bufs are attached too. + * + * Create an sk_buff (rcv_buf) that will be passed to the IO Partition + * so that it can write rcv data into our memory space. + * Return pointer to sk_buff + */ +static struct sk_buff * +alloc_rcv_buf(struct net_device *netdev) +{ + struct sk_buff *skb; + + /* NOTE: the first fragment in each rcv buffer is pointed to by + * rcvskb->data. For now all rcv buffers will be RCVPOST_BUF_SIZE + * in length, so the firstfrag is large enough to hold 1514. + */ + skb = alloc_skb(RCVPOST_BUF_SIZE, GFP_ATOMIC); + if (!skb) + return NULL; + skb->dev = netdev; + skb->len = RCVPOST_BUF_SIZE; + /* current value of mtu doesn't come into play here; large + * packets will just end up using multiple rcv buffers all of + * same size + */ + skb->data_len = 0; /* dev_alloc_skb already zeroes it out + * for clarification. + */ + return skb; +} + +/** + * post_skb - post a skb to the IO Partition. + * @cmdrsp: cmdrsp packet to be send to the IO Partition + * @devdata: visornic_devdata to post the skb too + * @skb: skb to give to the IO partition + * + * Send the skb to the IO Partition. + * Returns void + */ +static inline void +post_skb(struct uiscmdrsp *cmdrsp, + struct visornic_devdata *devdata, struct sk_buff *skb) +{ + cmdrsp->net.buf = skb; + cmdrsp->net.rcvpost.frag.pi_pfn = page_to_pfn(virt_to_page(skb->data)); + cmdrsp->net.rcvpost.frag.pi_off = + (unsigned long)skb->data & PI_PAGE_MASK; + cmdrsp->net.rcvpost.frag.pi_len = skb->len; + cmdrsp->net.rcvpost.unique_num = devdata->uniquenum; + + if ((cmdrsp->net.rcvpost.frag.pi_off + skb->len) <= PI_PAGE_SIZE) { + cmdrsp->net.type = NET_RCV_POST; + cmdrsp->cmdtype = CMD_NET_TYPE; + visorchannel_signalinsert(devdata->dev->visorchannel, + IOCHAN_TO_IOPART, + cmdrsp); + atomic_inc(&devdata->num_rcvbuf_in_iovm); + devdata->chstat.sent_post++; + } +} + +/** + * send_enbdis - send NET_RCV_ENBDIS to IO Partition + * @netdev: netdevice we are enable/disable, used as context + * return value + * @state: enable = 1/disable = 0 + * @devdata: visornic device we are enabling/disabling + * + * Send the enable/disable message to the IO Partition. + * Returns void + */ +static void +send_enbdis(struct net_device *netdev, int state, + struct visornic_devdata *devdata) +{ + devdata->cmdrsp_rcv->net.enbdis.enable = state; + devdata->cmdrsp_rcv->net.enbdis.context = netdev; + devdata->cmdrsp_rcv->net.type = NET_RCV_ENBDIS; + devdata->cmdrsp_rcv->cmdtype = CMD_NET_TYPE; + visorchannel_signalinsert(devdata->dev->visorchannel, + IOCHAN_TO_IOPART, + devdata->cmdrsp_rcv); + devdata->chstat.sent_enbdis++; +} + +/** + * visornic_disable_with_timeout - Disable network adapter + * @netdev: netdevice to disale + * @timeout: timeout to wait for disable + * + * Disable the network adapter and inform the IO Partition that we + * are disabled, reclaim memory from rcv bufs. + * Returns 0 on success, negative for failure of IO Partition + * responding. + * + */ +static int +visornic_disable_with_timeout(struct net_device *netdev, const int timeout) +{ + struct visornic_devdata *devdata = netdev_priv(netdev); + int i; + unsigned long flags; + int wait = 0; + + /* stop the transmit queue so nothing more can be transmitted */ + netif_stop_queue(netdev); + + /* send a msg telling the other end we are stopping incoming pkts */ + spin_lock_irqsave(&devdata->priv_lock, flags); + devdata->enabled = 0; + devdata->enab_dis_acked = 0; /* must wait for ack */ + spin_unlock_irqrestore(&devdata->priv_lock, flags); + + /* send disable and wait for ack -- don't hold lock when sending + * disable because if the queue is full, insert might sleep. + */ + send_enbdis(netdev, 0, devdata); + + /* wait for ack to arrive before we try to free rcv buffers + * NOTE: the other end automatically unposts the rcv buffers when + * when it gets a disable. + */ + spin_lock_irqsave(&devdata->priv_lock, flags); + while ((timeout == VISORNIC_INFINITE_RESPONSE_WAIT) || + (wait < timeout)) { + if (devdata->enab_dis_acked) + break; + if (devdata->server_down || devdata->server_change_state) { + spin_unlock_irqrestore(&devdata->priv_lock, flags); + return -EIO; + } + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&devdata->priv_lock, flags); + wait += schedule_timeout(msecs_to_jiffies(10)); + spin_lock_irqsave(&devdata->priv_lock, flags); + } + + /* Wait for usage to go to 1 (no other users) before freeing + * rcv buffers + */ + if (atomic_read(&devdata->usage) > 1) { + while (1) { + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&devdata->priv_lock, flags); + schedule_timeout(msecs_to_jiffies(10)); + spin_lock_irqsave(&devdata->priv_lock, flags); + if (atomic_read(&devdata->usage)) + break; + } + } + + /* we've set enabled to 0, so we can give up the lock. */ + spin_unlock_irqrestore(&devdata->priv_lock, flags); + + /* Free rcv buffers - other end has automatically unposed them on + * disable + */ + for (i = 0; i < devdata->num_rcv_bufs; i++) { + if (devdata->rcvbuf[i]) { + kfree_skb(devdata->rcvbuf[i]); + devdata->rcvbuf[i] = NULL; + } + } + + /* remove references from array */ + for (i = 0; i < VISORNICSOPENMAX; i++) + if (num_visornic_open[i] == netdev) { + num_visornic_open[i] = NULL; + break; + } + + return 0; +} + +/** + * init_rcv_bufs -- initialize receive bufs and send them to the IO Part + * @netdev: struct netdevice + * @devdata: visornic_devdata + * + * Allocate rcv buffers and post them to the IO Partition. + * Return 0 for success, and negative for failure. + */ +static int +init_rcv_bufs(struct net_device *netdev, struct visornic_devdata *devdata) +{ + int i, count; + + /* allocate fixed number of receive buffers to post to uisnic + * post receive buffers after we've allocated a required amount + */ + for (i = 0; i < devdata->num_rcv_bufs; i++) { + devdata->rcvbuf[i] = alloc_rcv_buf(netdev); + if (!devdata->rcvbuf[i]) + break; /* if we failed to allocate one let us stop */ + } + if (i == 0) /* couldn't even allocate one -- bail out */ + return -ENOMEM; + count = i; + + /* Ensure we can alloc 2/3rd of the requeested number of buffers. + * 2/3 is an arbitrary choice; used also in ndis init.c + */ + if (count < ((2 * devdata->num_rcv_bufs) / 3)) { + /* free receive buffers we did alloc and then bail out */ + for (i = 0; i < count; i++) { + kfree_skb(devdata->rcvbuf[i]); + devdata->rcvbuf[i] = NULL; + } + return -ENOMEM; + } + + /* post receive buffers to receive incoming input - without holding + * lock - we've not enabled nor started the queue so there shouldn't + * be any rcv or xmit activity + */ + for (i = 0; i < count; i++) + post_skb(devdata->cmdrsp_rcv, devdata, devdata->rcvbuf[i]); + + return 0; +} + +/** + * visornic_enable_with_timeout - send enable to IO Part + * @netdev: struct net_device + * @timeout: Time to wait for the ACK from the enable + * + * Sends enable to IOVM, inits, and posts receive buffers to IOVM + * timeout is defined in msecs (timeout of 0 specifies infinite wait) + * Return 0 for success, negavite for failure. + */ +static int +visornic_enable_with_timeout(struct net_device *netdev, const int timeout) +{ + int i; + struct visornic_devdata *devdata = netdev_priv(netdev); + unsigned long flags; + int wait = 0; + + /* NOTE: the other end automatically unposts the rcv buffers when it + * gets a disable. + */ + i = init_rcv_bufs(netdev, devdata); + if (i < 0) + return i; + + spin_lock_irqsave(&devdata->priv_lock, flags); + devdata->enabled = 1; + + /* now we're ready, let's send an ENB to uisnic but until we get + * an ACK back from uisnic, we'll drop the packets + */ + devdata->n_rcv_packets_not_accepted = 0; + spin_unlock_irqrestore(&devdata->priv_lock, flags); + + /* send enable and wait for ack -- don't hold lock when sending enable + * because if the queue is full, insert might sleep. + */ + send_enbdis(netdev, 1, devdata); + + spin_lock_irqsave(&devdata->priv_lock, flags); + while ((timeout == VISORNIC_INFINITE_RESPONSE_WAIT) || + (wait < timeout)) { + if (devdata->enab_dis_acked) + break; + if (devdata->server_down || devdata->server_change_state) { + spin_unlock_irqrestore(&devdata->priv_lock, flags); + return -EIO; + } + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&devdata->priv_lock, flags); + wait += schedule_timeout(msecs_to_jiffies(10)); + spin_lock_irqsave(&devdata->priv_lock, flags); + } + + spin_unlock_irqrestore(&devdata->priv_lock, flags); + + if (!devdata->enab_dis_acked) + return -EIO; + + /* find an open slot in the array to save off VisorNic references + * for debug + */ + for (i = 0; i < VISORNICSOPENMAX; i++) { + if (!num_visornic_open[i]) { + num_visornic_open[i] = netdev; + break; + } + } + + return 0; +} + +/** + * visornic_timeout_reset - handle xmit timeout resets + * @work work item that scheduled the work + * + * Transmit Timeouts are typically handled by resetting the + * device for our virtual NIC we will send a Disable and Enable + * to the IOVM. If it doesn't respond we will trigger a serverdown. + */ +static void +visornic_timeout_reset(struct work_struct *work) +{ + struct visornic_devdata *devdata; + struct net_device *netdev; + int response = 0; + + devdata = container_of(work, struct visornic_devdata, timeout_reset); + netdev = devdata->netdev; + + netif_stop_queue(netdev); + response = visornic_disable_with_timeout(netdev, 100); + if (response) + goto call_serverdown; + + response = visornic_enable_with_timeout(netdev, 100); + if (response) + goto call_serverdown; + netif_wake_queue(netdev); + + return; + +call_serverdown: + visornic_serverdown(devdata); +} + +/** + * visornic_open - Enable the visornic device and mark the queue started + * @netdev: netdevice to start + * + * Enable the device and start the transmit queue. + * Return 0 for success + */ +static int +visornic_open(struct net_device *netdev) +{ + visornic_enable_with_timeout(netdev, VISORNIC_INFINITE_RESPONSE_WAIT); + + /* start the interface's transmit queue, allowing it to accept + * packets for transmission + */ + netif_start_queue(netdev); + + return 0; +} + +/** + * visornic_close - Disables the visornic device and stops the queues + * @netdev: netdevice to start + * + * Disable the device and stop the transmit queue. + * Return 0 for success + */ +static int +visornic_close(struct net_device *netdev) +{ + netif_stop_queue(netdev); + visornic_disable_with_timeout(netdev, VISORNIC_INFINITE_RESPONSE_WAIT); + + return 0; +} + +/** + * visornic_xmit - send a packet to the IO Partition + * @skb: Packet to be sent + * @netdev: net device the packet is being sent from + * + * Convert the skb to a cmdrsp so the IO Partition can undersand it. + * Send the XMIT command to the IO Partition for processing. This + * function is protected from concurrent calls by a spinlock xmit_lock + * in the net_device struct, but as soon as the function returns it + * can be called again. + * Returns NETDEV_TX_OK for success, NETDEV_TX_BUSY for error. + */ +static int +visornic_xmit(struct sk_buff *skb, struct net_device *netdev) +{ + struct visornic_devdata *devdata; + int len, firstfraglen, padlen; + struct uiscmdrsp *cmdrsp = NULL; + unsigned long flags; + + devdata = netdev_priv(netdev); + spin_lock_irqsave(&devdata->priv_lock, flags); + + if (netif_queue_stopped(netdev) || devdata->server_down || + devdata->server_change_state) { + spin_unlock_irqrestore(&devdata->priv_lock, flags); + devdata->busy_cnt++; + return NETDEV_TX_BUSY; + } + + /* sk_buff struct is used to host network data throughout all the + * linux network subsystems + */ + len = skb->len; + + /* skb->len is the FULL length of data (including fragmentary portion) + * skb->data_len is the length of the fragment portion in frags + * skb->len - skb->data_len is size of the 1st fragment in skb->data + * calculate the length of the first fragment that skb->data is + * pointing to + */ + firstfraglen = skb->len - skb->data_len; + if (firstfraglen < ETH_HEADER_SIZE) { + spin_unlock_irqrestore(&devdata->priv_lock, flags); + devdata->busy_cnt++; + return NETDEV_TX_BUSY; + } + + if ((len < ETH_MIN_PACKET_SIZE) && + ((skb_end_pointer(skb) - skb->data) >= ETH_MIN_PACKET_SIZE)) { + /* pad the packet out to minimum size */ + padlen = ETH_MIN_PACKET_SIZE - len; + memset(&skb->data[len], 0, padlen); + skb->tail += padlen; + skb->len += padlen; + len += padlen; + firstfraglen += padlen; + } + + cmdrsp = devdata->xmit_cmdrsp; + /* clear cmdrsp */ + memset(cmdrsp, 0, SIZEOF_CMDRSP); + cmdrsp->net.type = NET_XMIT; + cmdrsp->cmdtype = CMD_NET_TYPE; + + /* save the pointer to skb -- we'll need it for completion */ + cmdrsp->net.buf = skb; + + if (((devdata->chstat.sent_xmit >= devdata->chstat.got_xmit_done) && + (devdata->chstat.sent_xmit - devdata->chstat.got_xmit_done >= + devdata->max_outstanding_net_xmits)) || + ((devdata->chstat.sent_xmit < devdata->chstat.got_xmit_done) && + (ULONG_MAX - devdata->chstat.got_xmit_done + + devdata->chstat.sent_xmit >= + devdata->max_outstanding_net_xmits))) { + /* too many NET_XMITs queued over to IOVM - need to wait + */ + devdata->chstat.reject_count++; + if (!devdata->queuefullmsg_logged && + ((devdata->chstat.reject_count & 0x3ff) == 1)) + devdata->queuefullmsg_logged = 1; + netif_stop_queue(netdev); + spin_unlock_irqrestore(&devdata->priv_lock, flags); + devdata->busy_cnt++; + return NETDEV_TX_BUSY; + } + if (devdata->queuefullmsg_logged) + devdata->queuefullmsg_logged = 0; + + if (skb->ip_summed == CHECKSUM_UNNECESSARY) { + cmdrsp->net.xmt.lincsum.valid = 1; + cmdrsp->net.xmt.lincsum.protocol = skb->protocol; + if (skb_transport_header(skb) > skb->data) { + cmdrsp->net.xmt.lincsum.hrawoff = + skb_transport_header(skb) - skb->data; + cmdrsp->net.xmt.lincsum.hrawoff = 1; + } + if (skb_network_header(skb) > skb->data) { + cmdrsp->net.xmt.lincsum.nhrawoff = + skb_network_header(skb) - skb->data; + cmdrsp->net.xmt.lincsum.nhrawoffv = 1; + } + cmdrsp->net.xmt.lincsum.csum = skb->csum; + } else { + cmdrsp->net.xmt.lincsum.valid = 0; + } + + /* save off the length of the entire data packet */ + cmdrsp->net.xmt.len = len; + + /* copy ethernet header from first frag into ocmdrsp + * - everything else will be pass in frags & DMA'ed + */ + memcpy(cmdrsp->net.xmt.ethhdr, skb->data, ETH_HEADER_SIZE); + /* copy frags info - from skb->data we need to only provide access + * beyond eth header + */ + cmdrsp->net.xmt.num_frags = + visor_copy_fragsinfo_from_skb(skb, firstfraglen, + MAX_PHYS_INFO, + cmdrsp->net.xmt.frags); + if (cmdrsp->net.xmt.num_frags == -1) { + spin_unlock_irqrestore(&devdata->priv_lock, flags); + devdata->busy_cnt++; + return NETDEV_TX_BUSY; + } + + if (!visorchannel_signalinsert(devdata->dev->visorchannel, + IOCHAN_TO_IOPART, cmdrsp)) { + netif_stop_queue(netdev); + spin_unlock_irqrestore(&devdata->priv_lock, flags); + devdata->busy_cnt++; + return NETDEV_TX_BUSY; + } + + /* Track the skbs that have been sent to the IOVM for XMIT */ + skb_queue_head(&devdata->xmitbufhead, skb); + + /* set the last transmission start time + * linux doc says: Do not forget to update netdev->trans_start to + * jiffies after each new tx packet is given to the hardware. + */ + netdev->trans_start = jiffies; + + /* update xmt stats */ + devdata->net_stats.tx_packets++; + devdata->net_stats.tx_bytes += skb->len; + devdata->chstat.sent_xmit++; + + /* check to see if we have hit the high watermark for + * netif_stop_queue() + */ + if (((devdata->chstat.sent_xmit >= devdata->chstat.got_xmit_done) && + (devdata->chstat.sent_xmit - devdata->chstat.got_xmit_done >= + devdata->upper_threshold_net_xmits)) || + ((devdata->chstat.sent_xmit < devdata->chstat.got_xmit_done) && + (ULONG_MAX - devdata->chstat.got_xmit_done + + devdata->chstat.sent_xmit >= + devdata->upper_threshold_net_xmits))) { + /* too many NET_XMITs queued over to IOVM - need to wait */ + netif_stop_queue(netdev); /* calling stop queue - call + * netif_wake_queue() after lower + * threshold + */ + devdata->flow_control_upper_hits++; + } + spin_unlock_irqrestore(&devdata->priv_lock, flags); + + /* skb will be freed when we get back NET_XMIT_DONE */ + return NETDEV_TX_OK; +} + +/** + * visornic_get_stats - returns net_stats of the visornic device + * @netdev: netdevice + * + * Returns the net_device_stats for the device + */ +static struct net_device_stats * +visornic_get_stats(struct net_device *netdev) +{ + struct visornic_devdata *devdata = netdev_priv(netdev); + + return &devdata->net_stats; +} + +/** + * visornic_ioctl - ioctl function for netdevice. + * @netdev: netdevice + * @ifr: ignored + * @cmd: ignored + * + * Currently not supported. + * Returns EOPNOTSUPP + */ +static int +visornic_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + return -EOPNOTSUPP; +} + +/** + * visornic_change_mtu - changes mtu of device. + * @netdev: netdevice + * @new_mtu: value of new mtu + * + * MTU cannot be changed by system, must be changed via + * CONTROLVM message. All vnics and pnics in a switch have + * to have the same MTU for everything to work. + * Currently not supported. + * Returns EINVAL + */ +static int +visornic_change_mtu(struct net_device *netdev, int new_mtu) +{ + return -EINVAL; +} + +/** + * visornic_set_multi - changes mtu of device. + * @netdev: netdevice + * + * Only flag we support currently is IFF_PROMISC + * Returns void + */ +static void +visornic_set_multi(struct net_device *netdev) +{ + struct uiscmdrsp *cmdrsp; + struct visornic_devdata *devdata = netdev_priv(netdev); + + /* any filtering changes */ + if (devdata->old_flags != netdev->flags) { + if ((netdev->flags & IFF_PROMISC) != + (devdata->old_flags & IFF_PROMISC)) { + cmdrsp = kmalloc(SIZEOF_CMDRSP, GFP_ATOMIC); + if (!cmdrsp) + return; + cmdrsp->cmdtype = CMD_NET_TYPE; + cmdrsp->net.type = NET_RCV_PROMISC; + cmdrsp->net.enbdis.context = netdev; + cmdrsp->net.enbdis.enable = + (netdev->flags & IFF_PROMISC); + visorchannel_signalinsert(devdata->dev->visorchannel, + IOCHAN_TO_IOPART, + cmdrsp); + kfree(cmdrsp); + } + devdata->old_flags = netdev->flags; + } +} + +/** + * visornic_xmit_timeout - request to timeout the xmit + * @netdev + * + * Queue the work and return. Make sure we have not already + * been informed the IO Partition is gone, if it is gone + * we will already timeout the xmits. + */ +static void +visornic_xmit_timeout(struct net_device *netdev) +{ + struct visornic_devdata *devdata = netdev_priv(netdev); + unsigned long flags; + + spin_lock_irqsave(&devdata->priv_lock, flags); + /* Ensure that a ServerDown message hasn't been received */ + if (!devdata->enabled || + (devdata->server_down && !devdata->server_change_state)) { + spin_unlock_irqrestore(&devdata->priv_lock, flags); + return; + } + spin_unlock_irqrestore(&devdata->priv_lock, flags); + + queue_work(visornic_timeout_reset_workqueue, &devdata->timeout_reset); +} + +/** + * repost_return - repost rcv bufs that have come back + * @cmdrsp: io channel command struct to post + * @devdata: visornic devdata for the device + * @skb: skb + * @netdev: netdevice + * + * Repost rcv buffers that have been returned to us when + * we are finished with them. + * Returns 0 for success, -1 for error. + */ +static inline int +repost_return(struct uiscmdrsp *cmdrsp, struct visornic_devdata *devdata, + struct sk_buff *skb, struct net_device *netdev) +{ + struct net_pkt_rcv copy; + int i = 0, cc, numreposted; + int found_skb = 0; + int status = 0; + + copy = cmdrsp->net.rcv; + switch (copy.numrcvbufs) { + case 0: + devdata->n_rcv0++; + break; + case 1: + devdata->n_rcv1++; + break; + case 2: + devdata->n_rcv2++; + break; + default: + devdata->n_rcvx++; + break; + } + for (cc = 0, numreposted = 0; cc < copy.numrcvbufs; cc++) { + for (i = 0; i < devdata->num_rcv_bufs; i++) { + if (devdata->rcvbuf[i] != copy.rcvbuf[cc]) + continue; + + if ((skb) && devdata->rcvbuf[i] == skb) { + devdata->found_repost_rcvbuf_cnt++; + found_skb = 1; + devdata->repost_found_skb_cnt++; + } + devdata->rcvbuf[i] = alloc_rcv_buf(netdev); + if (!devdata->rcvbuf[i]) { + devdata->num_rcv_bufs_could_not_alloc++; + devdata->alloc_failed_in_repost_rtn_cnt++; + status = -ENOMEM; + break; + } + post_skb(cmdrsp, devdata, devdata->rcvbuf[i]); + numreposted++; + break; + } + } + if (numreposted != copy.numrcvbufs) { + devdata->n_repost_deficit++; + status = -EINVAL; + } + if (skb) { + if (found_skb) { + kfree_skb(skb); + } else { + status = -EINVAL; + devdata->bad_rcv_buf++; + } + } + atomic_dec(&devdata->usage); + return status; +} + +/** + * visornic_rx - Handle receive packets coming back from IO Part + * @cmdrsp: Receive packet returned from IO Part + * + * Got a receive packet back from the IO Part, handle it and send + * it up the stack. + * Returns void + */ +static void +visornic_rx(struct uiscmdrsp *cmdrsp) +{ + struct visornic_devdata *devdata; + struct sk_buff *skb, *prev, *curr; + struct net_device *netdev; + int cc, currsize, off, status; + struct ethhdr *eth; + unsigned long flags; +#ifdef DEBUG + struct phys_info testfrags[MAX_PHYS_INFO]; +#endif + + /* post new rcv buf to the other end using the cmdrsp we have at hand + * post it without holding lock - but we'll use the signal lock to + * synchronize the queue insert the cmdrsp that contains the net.rcv + * is the one we are using to repost, so copy the info we need from it. + */ + skb = cmdrsp->net.buf; + netdev = skb->dev; + + if (!netdev) { + /* We must have previously downed this network device and + * this skb and device is no longer valid. This also means + * the skb reference was removed from devdata->rcvbuf so no + * need to search for it. + * All we can do is free the skb and return. + * Note: We crash if we try to log this here. + */ + kfree_skb(skb); + return; + } + + devdata = netdev_priv(netdev); + + spin_lock_irqsave(&devdata->priv_lock, flags); + atomic_dec(&devdata->num_rcvbuf_in_iovm); + + /* update rcv stats - call it with priv_lock held */ + devdata->net_stats.rx_packets++; + devdata->net_stats.rx_bytes = skb->len; + + atomic_inc(&devdata->usage); /* don't want a close to happen before + * we're done here + */ + + /* set length to how much was ACTUALLY received - + * NOTE: rcv_done_len includes actual length of data rcvd + * including ethhdr + */ + skb->len = cmdrsp->net.rcv.rcv_done_len; + + /* test enabled while holding lock */ + if (!(devdata->enabled && devdata->enab_dis_acked)) { + /* don't process it unless we're in enable mode and until + * we've gotten an ACK saying the other end got our RCV enable + */ + spin_unlock_irqrestore(&devdata->priv_lock, flags); + repost_return(cmdrsp, devdata, skb, netdev); + return; + } + + spin_unlock_irqrestore(&devdata->priv_lock, flags); + + /* when skb was allocated, skb->dev, skb->data, skb->len and + * skb->data_len were setup. AND, data has already put into the + * skb (both first frag and in frags pages) + * NOTE: firstfragslen is the amount of data in skb->data and that + * which is not in nr_frags or frag_list. This is now simply + * RCVPOST_BUF_SIZE. bump tail to show how much data is in + * firstfrag & set data_len to show rest see if we have to chain + * frag_list. + */ + if (skb->len > RCVPOST_BUF_SIZE) { /* do PRECAUTIONARY check */ + if (cmdrsp->net.rcv.numrcvbufs < 2) { + if (repost_return(cmdrsp, devdata, skb, netdev) < 0) + dev_err(&devdata->netdev->dev, + "repost_return failed"); + return; + } + /* length rcvd is greater than firstfrag in this skb rcv buf */ + skb->tail += RCVPOST_BUF_SIZE; /* amount in skb->data */ + skb->data_len = skb->len - RCVPOST_BUF_SIZE; /* amount that + will be in + frag_list */ + } else { + /* data fits in this skb - no chaining - do + * PRECAUTIONARY check + */ + if (cmdrsp->net.rcv.numrcvbufs != 1) { /* should be 1 */ + if (repost_return(cmdrsp, devdata, skb, netdev) < 0) + dev_err(&devdata->netdev->dev, + "repost_return failed"); + return; + } + skb->tail += skb->len; + skb->data_len = 0; /* nothing rcvd in frag_list */ + } + off = skb_tail_pointer(skb) - skb->data; + + /* amount we bumped tail by in the head skb + * it is used to calculate the size of each chained skb below + * it is also used to index into bufline to continue the copy + * (for chansocktwopc) + * if necessary chain the rcv skbs together. + * NOTE: index 0 has the same as cmdrsp->net.rcv.skb; we need to + * chain the rest to that one. + * - do PRECAUTIONARY check + */ + if (cmdrsp->net.rcv.rcvbuf[0] != skb) { + if (repost_return(cmdrsp, devdata, skb, netdev) < 0) + dev_err(&devdata->netdev->dev, "repost_return failed"); + return; + } + + if (cmdrsp->net.rcv.numrcvbufs > 1) { + /* chain the various rcv buffers into the skb's frag_list. */ + /* Note: off was initialized above */ + for (cc = 1, prev = NULL; + cc < cmdrsp->net.rcv.numrcvbufs; cc++) { + curr = (struct sk_buff *)cmdrsp->net.rcv.rcvbuf[cc]; + curr->next = NULL; + if (!prev) /* start of list- set head */ + skb_shinfo(skb)->frag_list = curr; + else + prev->next = curr; + prev = curr; + + /* should we set skb->len and skb->data_len for each + * buffer being chained??? can't hurt! + */ + currsize = min(skb->len - off, + (unsigned int)RCVPOST_BUF_SIZE); + curr->len = currsize; + curr->tail += currsize; + curr->data_len = 0; + off += currsize; + } +#ifdef DEBUG + /* assert skb->len == off */ + if (skb->len != off) { + dev_err(&devdata->netdev->dev, + "%s something wrong; skb->len:%d != off:%d\n", + netdev->name, skb->len, off); + } + /* test code */ + cc = util_copy_fragsinfo_from_skb("rcvchaintest", skb, + RCVPOST_BUF_SIZE, + MAX_PHYS_INFO, testfrags); + if (cc != cmdrsp->net.rcv.numrcvbufs) { + dev_err(&devdata->netdev->dev, + "**** %s Something wrong; rcvd chain length %d different from one we calculated %d\n", + netdev->name, cmdrsp->net.rcv.numrcvbufs, cc); + } + for (i = 0; i < cc; i++) { + dev_inf(&devdata->netdev->dev, + "test:RCVPOST_BUF_SIZE:%d[%d] pfn:%llu off:0x%x len:%d\n", + RCVPOST_BUF_SIZE, i, testfrags[i].pi_pfn, + testfrags[i].pi_off, testfrags[i].pi_len); + } +#endif + } + + /* set up packet's protocl type using ethernet header - this + * sets up skb->pkt_type & it also PULLS out the eth header + */ + skb->protocol = eth_type_trans(skb, netdev); + + eth = eth_hdr(skb); + + skb->csum = 0; + skb->ip_summed = CHECKSUM_NONE; + + do { + if (netdev->flags & IFF_PROMISC) + break; /* accept all packets */ + if (skb->pkt_type == PACKET_BROADCAST) { + if (netdev->flags & IFF_BROADCAST) + break; /* accept all broadcast packets */ + } else if (skb->pkt_type == PACKET_MULTICAST) { + if ((netdev->flags & IFF_MULTICAST) && + (netdev_mc_count(netdev))) { + struct netdev_hw_addr *ha; + int found_mc = 0; + + /* only accept multicast packets that we can + * find in our multicast address list + */ + netdev_for_each_mc_addr(ha, netdev) { + if (ether_addr_equal(eth->h_dest, + ha->addr)) { + found_mc = 1; + break; + } + } + if (found_mc) + break; /* accept packet, dest + matches a multicast + address */ + } + } else if (skb->pkt_type == PACKET_HOST) { + break; /* accept packet, h_dest must match vnic + mac address */ + } else if (skb->pkt_type == PACKET_OTHERHOST) { + /* something is not right */ + dev_err(&devdata->netdev->dev, + "**** FAILED to deliver rcv packet to OS; name:%s Dest:%pM VNIC:%pM\n", + netdev->name, eth->h_dest, netdev->dev_addr); + } + /* drop packet - don't forward it up to OS */ + devdata->n_rcv_packets_not_accepted++; + repost_return(cmdrsp, devdata, skb, netdev); + return; + } while (0); + + status = netif_rx(skb); + /* netif_rx returns various values, but "in practice most drivers + * ignore the return value + */ + + skb = NULL; + /* + * whether the packet got dropped or handled, the skb is freed by + * kernel code, so we shouldn't free it. but we should repost a + * new rcv buffer. + */ + repost_return(cmdrsp, devdata, skb, netdev); +} + +/** + * devdata_initialize - Initialize devdata structure + * @devdata: visornic_devdata structure to initialize + * #dev: visorbus_deviced it belongs to + * + * Setup initial values for the visornic based on channel and default + * values. + * Returns a pointer to the devdata if successful, else NULL + */ +static struct visornic_devdata * +devdata_initialize(struct visornic_devdata *devdata, struct visor_device *dev) +{ + int devnum = -1; + + if (!devdata) + return NULL; + memset(devdata, '\0', sizeof(struct visornic_devdata)); + spin_lock(&dev_num_pool_lock); + devnum = find_first_zero_bit(dev_num_pool, MAXDEVICES); + set_bit(devnum, dev_num_pool); + spin_unlock(&dev_num_pool_lock); + if (devnum == MAXDEVICES) + devnum = -1; + if (devnum < 0) { + kfree(devdata); + return NULL; + } + devdata->devnum = devnum; + devdata->dev = dev; + strncpy(devdata->name, dev_name(&dev->device), sizeof(devdata->name)); + kref_init(&devdata->kref); + spin_lock(&lock_all_devices); + list_add_tail(&devdata->list_all, &list_all_devices); + spin_unlock(&lock_all_devices); + return devdata; +} + +/** + * devdata_release - Frees up a devdata + * @mykref: kref to the devdata + * + * Frees up a devdata. + * Returns void + */ +static void devdata_release(struct kref *mykref) +{ + struct visornic_devdata *devdata = + container_of(mykref, struct visornic_devdata, kref); + + spin_lock(&dev_num_pool_lock); + clear_bit(devdata->devnum, dev_num_pool); + spin_unlock(&dev_num_pool_lock); + spin_lock(&lock_all_devices); + list_del(&devdata->list_all); + spin_unlock(&lock_all_devices); + kfree(devdata); +} + +static const struct net_device_ops visornic_dev_ops = { + .ndo_open = visornic_open, + .ndo_stop = visornic_close, + .ndo_start_xmit = visornic_xmit, + .ndo_get_stats = visornic_get_stats, + .ndo_do_ioctl = visornic_ioctl, + .ndo_change_mtu = visornic_change_mtu, + .ndo_tx_timeout = visornic_xmit_timeout, + .ndo_set_rx_mode = visornic_set_multi, +}; + +/** + * send_rcv_posts_if_needed + * @devdata: visornic device + * + * Send receive buffers to the IO Partition. + * Returns void + */ +static void +send_rcv_posts_if_needed(struct visornic_devdata *devdata) +{ + int i; + struct net_device *netdev; + struct uiscmdrsp *cmdrsp = devdata->cmdrsp_rcv; + int cur_num_rcv_bufs_to_alloc, rcv_bufs_allocated; + + /* don't do this until vnic is marked ready */ + if (!(devdata->enabled && devdata->enab_dis_acked)) + return; + + netdev = devdata->netdev; + rcv_bufs_allocated = 0; + /* this code is trying to prevent getting stuck here forever, + * but still retry it if you cant allocate them all this time. + */ + cur_num_rcv_bufs_to_alloc = devdata->num_rcv_bufs_could_not_alloc; + while (cur_num_rcv_bufs_to_alloc > 0) { + cur_num_rcv_bufs_to_alloc--; + for (i = 0; i < devdata->num_rcv_bufs; i++) { + if (devdata->rcvbuf[i]) + continue; + devdata->rcvbuf[i] = alloc_rcv_buf(netdev); + if (!devdata->rcvbuf[i]) { + devdata->alloc_failed_in_if_needed_cnt++; + break; + } + rcv_bufs_allocated++; + post_skb(cmdrsp, devdata, devdata->rcvbuf[i]); + devdata->chstat.extra_rcvbufs_sent++; + } + } + devdata->num_rcv_bufs_could_not_alloc -= rcv_bufs_allocated; +} + +/** + * draing_queue - drains the response queue + * @cmdrsp: io channel command response message + * @devdata: visornic device to drain + * + * Drain the respones queue of any responses from the IO partition. + * Process the responses as we get them. + * Returns when response queue is empty or when the threadd stops. + */ +static void +drain_queue(struct uiscmdrsp *cmdrsp, struct visornic_devdata *devdata) +{ + unsigned long flags; + struct net_device *netdev; + + /* drain queue */ + while (1) { + /* TODO: CLIENT ACQUIRE -- Don't really need this at the + * moment */ + if (!visorchannel_signalremove(devdata->dev->visorchannel, + IOCHAN_FROM_IOPART, + cmdrsp)) + break; /* queue empty */ + + switch (cmdrsp->net.type) { + case NET_RCV: + devdata->chstat.got_rcv++; + /* process incoming packet */ + visornic_rx(cmdrsp); + break; + case NET_XMIT_DONE: + spin_lock_irqsave(&devdata->priv_lock, flags); + devdata->chstat.got_xmit_done++; + if (cmdrsp->net.xmtdone.xmt_done_result) + devdata->chstat.xmit_fail++; + /* only call queue wake if we stopped it */ + netdev = ((struct sk_buff *)cmdrsp->net.buf)->dev; + /* ASSERT netdev == vnicinfo->netdev; */ + if ((netdev == devdata->netdev) && + netif_queue_stopped(netdev)) { + /* check to see if we have crossed + * the lower watermark for + * netif_wake_queue() + */ + if (((devdata->chstat.sent_xmit >= + devdata->chstat.got_xmit_done) && + (devdata->chstat.sent_xmit - + devdata->chstat.got_xmit_done <= + devdata->lower_threshold_net_xmits)) || + ((devdata->chstat.sent_xmit < + devdata->chstat.got_xmit_done) && + (ULONG_MAX - devdata->chstat.got_xmit_done + + devdata->chstat.sent_xmit <= + devdata->lower_threshold_net_xmits))) { + /* enough NET_XMITs completed + * so can restart netif queue + */ + netif_wake_queue(netdev); + devdata->flow_control_lower_hits++; + } + } + skb_unlink(cmdrsp->net.buf, &devdata->xmitbufhead); + spin_unlock_irqrestore(&devdata->priv_lock, flags); + kfree_skb(cmdrsp->net.buf); + break; + case NET_RCV_ENBDIS_ACK: + devdata->chstat.got_enbdisack++; + netdev = (struct net_device *) + cmdrsp->net.enbdis.context; + spin_lock_irqsave(&devdata->priv_lock, flags); + devdata->enab_dis_acked = 1; + spin_unlock_irqrestore(&devdata->priv_lock, flags); + + if (devdata->server_down && + devdata->server_change_state) { + /* Inform Linux that the link is up */ + devdata->server_down = false; + devdata->server_change_state = false; + netif_wake_queue(netdev); + netif_carrier_on(netdev); + } + break; + case NET_CONNECT_STATUS: + netdev = devdata->netdev; + if (cmdrsp->net.enbdis.enable == 1) { + spin_lock_irqsave(&devdata->priv_lock, flags); + devdata->enabled = cmdrsp->net.enbdis.enable; + spin_unlock_irqrestore(&devdata->priv_lock, + flags); + netif_wake_queue(netdev); + netif_carrier_on(netdev); + } else { + netif_stop_queue(netdev); + netif_carrier_off(netdev); + spin_lock_irqsave(&devdata->priv_lock, flags); + devdata->enabled = cmdrsp->net.enbdis.enable; + spin_unlock_irqrestore(&devdata->priv_lock, + flags); + } + break; + default: + break; + } + /* cmdrsp is now available for reuse */ + + if (kthread_should_stop()) + break; + } +} + +/** + * process_incoming_rsps - Checks the status of the response queue. + * @v: void pointer to the visronic devdata + * + * Main function of the vnic_incoming thread. Peridocially check the + * response queue and drain it if needed. + * Returns when thread has stopped. + */ +static int +process_incoming_rsps(void *v) +{ + struct visornic_devdata *devdata = v; + struct uiscmdrsp *cmdrsp = NULL; + const int SZ = SIZEOF_CMDRSP; + + cmdrsp = kmalloc(SZ, GFP_ATOMIC); + if (!cmdrsp) + complete_and_exit(&devdata->threadinfo.has_stopped, 0); + + while (1) { + wait_event_interruptible_timeout( + devdata->rsp_queue, (atomic_read( + &devdata->interrupt_rcvd) == 1), + msecs_to_jiffies(devdata->thread_wait_ms)); + + /* periodically check to see if there are any rcf bufs which + * need to get sent to the IOSP. This can only happen if + * we run out of memory when trying to allocate skbs. + */ + atomic_set(&devdata->interrupt_rcvd, 0); + send_rcv_posts_if_needed(devdata); + drain_queue(cmdrsp, devdata); + if (kthread_should_stop()) + break; + } + + kfree(cmdrsp); + complete_and_exit(&devdata->threadinfo.has_stopped, 0); +} + +/** + * visornic_probe - probe function for visornic devices + * @dev: The visor device discovered + * + * Called when visorbus discovers a visornic device on its + * bus. It creates a new visornic ethernet adapter. + * Returns 0 or negative for error. + */ +static int visornic_probe(struct visor_device *dev) +{ + struct visornic_devdata *devdata = NULL; + struct net_device *netdev = NULL; + int err; + int channel_offset = 0; + u64 features; + + netdev = alloc_etherdev(sizeof(struct visornic_devdata)); + if (!netdev) + return -ENOMEM; + + netdev->netdev_ops = &visornic_dev_ops; + netdev->watchdog_timeo = (5 * HZ); + netdev->dev.parent = &dev->device; + + /* Get MAC adddress from channel and read it into the device. */ + netdev->addr_len = ETH_ALEN; + channel_offset = offsetof(struct spar_io_channel_protocol, + vnic.macaddr); + err = visorbus_read_channel(dev, channel_offset, netdev->dev_addr, + ETH_ALEN); + if (err < 0) + goto cleanup_netdev; + + devdata = devdata_initialize(netdev_priv(netdev), dev); + if (!devdata) { + err = -ENOMEM; + goto cleanup_netdev; + } + + devdata->netdev = netdev; + init_waitqueue_head(&devdata->rsp_queue); + spin_lock_init(&devdata->priv_lock); + devdata->enabled = 0; /* not yet */ + atomic_set(&devdata->usage, 1); + + /* Setup rcv bufs */ + channel_offset = offsetof(struct spar_io_channel_protocol, + vnic.num_rcv_bufs); + err = visorbus_read_channel(dev, channel_offset, + &devdata->num_rcv_bufs, 4); + if (err) + goto cleanup_netdev; + + devdata->rcvbuf = kmalloc(sizeof(struct sk_buff *) * + devdata->num_rcv_bufs, GFP_KERNEL); + if (!devdata->rcvbuf) { + err = -ENOMEM; + goto cleanup_rcvbuf; + } + + /* set the net_xmit outstanding threshold */ + /* always leave two slots open but you should have 3 at a minimum */ + devdata->max_outstanding_net_xmits = + max(3, ((devdata->num_rcv_bufs / 3) - 2)); + devdata->upper_threshold_net_xmits = + max(2, devdata->max_outstanding_net_xmits - 1); + devdata->lower_threshold_net_xmits = + max(1, devdata->max_outstanding_net_xmits / 2); + + skb_queue_head_init(&devdata->xmitbufhead); + + /* create a cmdrsp we can use to post and unpost rcv buffers */ + devdata->cmdrsp_rcv = kmalloc(SIZEOF_CMDRSP, GFP_ATOMIC); + if (!devdata->cmdrsp_rcv) { + err = -ENOMEM; + goto cleanup_cmdrsp_rcv; + } + devdata->xmit_cmdrsp = kmalloc(SIZEOF_CMDRSP, GFP_ATOMIC); + if (!devdata->xmit_cmdrsp) { + err = -ENOMEM; + goto cleanup_xmit_cmdrsp; + } + INIT_WORK(&devdata->serverdown_completion, + visornic_serverdown_complete); + INIT_WORK(&devdata->timeout_reset, visornic_timeout_reset); + devdata->server_down = false; + devdata->server_change_state = false; + + /*set the default mtu */ + channel_offset = offsetof(struct spar_io_channel_protocol, + vnic.mtu); + err = visorbus_read_channel(dev, channel_offset, &netdev->mtu, 4); + if (err) + goto cleanup_xmit_cmdrsp; + + /* TODO: Setup Interrupt information */ + /* Let's start our threads to get responses */ + channel_offset = offsetof(struct spar_io_channel_protocol, + channel_header.features); + err = visorbus_read_channel(dev, channel_offset, &features, 8); + if (err) + goto cleanup_xmit_cmdrsp; + + features |= ULTRA_IO_CHANNEL_IS_POLLING; + err = visorbus_write_channel(dev, channel_offset, &features, 8); + if (err) + goto cleanup_xmit_cmdrsp; + + devdata->thread_wait_ms = 2; + visor_thread_start(&devdata->threadinfo, process_incoming_rsps, + devdata, "vnic_incoming"); + + err = register_netdev(netdev); + if (err) + goto cleanup_thread_stop; + + /* create debgug/sysfs directories */ + devdata->eth_debugfs_dir = debugfs_create_dir(netdev->name, + visornic_debugfs_dir); + if (!devdata->eth_debugfs_dir) { + err = -ENOMEM; + goto cleanup_thread_stop; + } + + return 0; + +cleanup_thread_stop: + visor_thread_stop(&devdata->threadinfo); + +cleanup_xmit_cmdrsp: + kfree(devdata->xmit_cmdrsp); + +cleanup_cmdrsp_rcv: + kfree(devdata->cmdrsp_rcv); + +cleanup_rcvbuf: + kfree(devdata->rcvbuf); + +cleanup_netdev: + free_netdev(netdev); + return err; +} + +/** + * host_side_disappeared - IO part is gone. + * @devdata: device object + * + * IO partition servicing this device is gone, do cleanup + * Returns void. + */ +static void host_side_disappeared(struct visornic_devdata *devdata) +{ + unsigned long flags; + + spin_lock_irqsave(&devdata->priv_lock, flags); + sprintf(devdata->name, "", devdata->devnum); + devdata->dev = NULL; /* indicate device destroyed */ + spin_unlock_irqrestore(&devdata->priv_lock, flags); +} + +/** + * visornic_remove - Called when visornic dev goes away + * @dev: visornic device that is being removed + * + * Called when DEVICE_DESTROY gets called to remove device. + * Returns void + */ +static void visornic_remove(struct visor_device *dev) +{ + struct visornic_devdata *devdata = dev_get_drvdata(&dev->device); + + if (!devdata) + return; + dev_set_drvdata(&dev->device, NULL); + host_side_disappeared(devdata); + kref_put(&devdata->kref, devdata_release); +} + +/** + * visornic_pause - Called when IO Part disappears + * @dev: visornic device that is being serviced + * @complete_func: call when finished. + * + * Called when the IO Partition has gone down. Need to free + * up resources and wait for IO partition to come back. Mark + * link as down and don't attempt any DMA. When we have freed + * memory call the complete_func so that Command knows we are + * done. If we don't call complete_func, IO part will never + * come back. + * Returns 0 for success. + */ +static int visornic_pause(struct visor_device *dev, + visorbus_state_complete_func complete_func) +{ + struct visornic_devdata *devdata = dev_get_drvdata(&dev->device); + + visornic_serverdown(devdata); + complete_func(dev, 0); + return 0; +} + +/** + * visornic_resume - Called when IO part has recovered + * @dev: visornic device that is being serviced + * @compelte_func: call when finished + * + * Called when the IO partition has recovered. Reestablish + * connection to the IO part and set the link up. Okay to do + * DMA again. + * Returns 0 for success. + */ +static int visornic_resume(struct visor_device *dev, + visorbus_state_complete_func complete_func) +{ + struct visornic_devdata *devdata; + struct net_device *netdev; + unsigned long flags; + + devdata = dev_get_drvdata(&dev->device); + if (!devdata) + return -EINVAL; + + netdev = devdata->netdev; + + if (devdata->server_down && !devdata->server_change_state) { + devdata->server_change_state = true; + /* Must transition channel to ATTACHED state BEFORE + * we can start using the device again. + * TODO: State transitions + */ + visor_thread_start(&devdata->threadinfo, process_incoming_rsps, + devdata, "vnic_incoming"); + init_rcv_bufs(netdev, devdata); + spin_lock_irqsave(&devdata->priv_lock, flags); + devdata->enabled = 1; + + /* Now we're ready, let's send an ENB to uisnic but until + * we get an ACK back from uisnic, we'll drop the packets + */ + devdata->enab_dis_acked = 0; + spin_unlock_irqrestore(&devdata->priv_lock, flags); + + /* send enable and wait for ack - don't hold lock when + * sending enable because if the queue if sull, insert + * might sleep. + */ + send_enbdis(netdev, 1, devdata); + } else if (devdata->server_change_state) { + return -EIO; + } + + complete_func(dev, 0); + return 0; +} + +/** + * visornic_init - Init function + * + * Init function for the visornic driver. Do initial driver setup + * and wait for devices. + * Returns 0 for success, negative for error. + */ +static int visornic_init(void) +{ + struct dentry *ret; + int err = -ENOMEM; + + /* create workqueue for serverdown completion */ + visornic_serverdown_workqueue = + create_singlethread_workqueue("visornic_serverdown"); + if (!visornic_serverdown_workqueue) + return -ENOMEM; + + /* create workqueue for tx timeout reset */ + visornic_timeout_reset_workqueue = + create_singlethread_workqueue("visornic_timeout_reset"); + if (!visornic_timeout_reset_workqueue) + return -ENOMEM; + + visornic_debugfs_dir = debugfs_create_dir("visornic", NULL); + if (!visornic_debugfs_dir) + return err; + + ret = debugfs_create_file("info", S_IRUSR, visornic_debugfs_dir, NULL, + &debugfs_info_fops); + if (!ret) + goto cleanup_debugfs; + ret = debugfs_create_file("enable_ints", S_IWUSR, visornic_debugfs_dir, + NULL, &debugfs_enable_ints_fops); + if (!ret) + goto cleanup_debugfs; + + /* create workqueue for serverdown completion */ + visornic_serverdown_workqueue = + create_singlethread_workqueue("visornic_serverdown"); + if (!visornic_serverdown_workqueue) + goto cleanup_debugfs; + + /* create workqueue for tx timeout reset */ + visornic_timeout_reset_workqueue = + create_singlethread_workqueue("visornic_timeout_reset"); + if (!visornic_timeout_reset_workqueue) + goto cleanup_workqueue; + + spin_lock_init(&dev_num_pool_lock); + dev_num_pool = kzalloc(BITS_TO_LONGS(MAXDEVICES), GFP_KERNEL); + if (!dev_num_pool) + goto cleanup_workqueue; + + visorbus_register_visor_driver(&visornic_driver); + return 0; + +cleanup_workqueue: + flush_workqueue(visornic_serverdown_workqueue); + destroy_workqueue(visornic_serverdown_workqueue); + if (visornic_timeout_reset_workqueue) { + flush_workqueue(visornic_timeout_reset_workqueue); + destroy_workqueue(visornic_timeout_reset_workqueue); + } +cleanup_debugfs: + debugfs_remove_recursive(visornic_debugfs_dir); + + return err; +} + +/** + * visornic_cleanup - driver exit routine + * + * Unregister driver from the bus and free up memory. + */ +static void visornic_cleanup(void) +{ + if (visornic_serverdown_workqueue) { + flush_workqueue(visornic_serverdown_workqueue); + destroy_workqueue(visornic_serverdown_workqueue); + } + if (visornic_timeout_reset_workqueue) { + flush_workqueue(visornic_timeout_reset_workqueue); + destroy_workqueue(visornic_timeout_reset_workqueue); + } + debugfs_remove_recursive(visornic_debugfs_dir); + + visorbus_unregister_visor_driver(&visornic_driver); + kfree(dev_num_pool); + dev_num_pool = NULL; +} + +module_init(visornic_init); +module_exit(visornic_cleanup); + +MODULE_AUTHOR("Unisys"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("sPAR nic driver for sparlinux: ver 1.0.0.0"); +MODULE_VERSION("1.0.0.0"); -- 2.7.4