From 68437a39ee4f1663a14ba55d91350fafe3076108 Mon Sep 17 00:00:00 2001 From: Daniel Jacobowitz Date: Thu, 21 Sep 2006 14:01:12 +0000 Subject: [PATCH] * gdb.texinfo (Packets): Document vFlashErase, vFlashWrite and vFlashDone packets. (General Query Packets): Document qXfer:memory-map:read. Add a new feature for qXfer:memory-map:read. (Memory map format): New section. (Target Commands): Mention that gdb can write flash. --- gdb/doc/ChangeLog | 10 ++++ gdb/doc/gdb.texinfo | 155 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 165 insertions(+) diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog index 135ddd9..3594b06 100644 --- a/gdb/doc/ChangeLog +++ b/gdb/doc/ChangeLog @@ -1,6 +1,16 @@ 2006-09-21 Vladimir Prus Daniel Jacobowitz + * gdb.texinfo (Packets): Document vFlashErase, + vFlashWrite and vFlashDone packets. + (General Query Packets): Document qXfer:memory-map:read. + Add a new feature for qXfer:memory-map:read. + (Memory map format): New section. + (Target Commands): Mention that gdb can write flash. + +2006-09-21 Vladimir Prus + Daniel Jacobowitz + * gdb.texinfo (Memory Region Attributes): Mention target-supplied memory regions and "mem auto". diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo index 3fc7544..2b99cc0 100644 --- a/gdb/doc/gdb.texinfo +++ b/gdb/doc/gdb.texinfo @@ -12291,6 +12291,9 @@ link the program; for other formats, like a.out, the object file format specifies a fixed address. @c FIXME! This would be a good place for an xref to the GNU linker doc. +Depending on the remote side capabilities, @value{GDBN} may be able to +load programs into flash memory. + @code{load} does not repeat if you press @key{RET} again after using it. @end table @@ -22654,6 +22657,7 @@ Show the current setting of the target wait timeout. * Interrupts:: * Examples:: * File-I/O remote protocol extension:: +* Memory map format:: @end menu @node Overview @@ -23152,6 +23156,58 @@ command in the @samp{vCont} packet. The @samp{vCont} packet is not supported. @end table +@item vFlashErase:@var{addr},@var{length} +@cindex @samp{vFlashErase} packet +Direct the stub to erase @var{length} bytes of flash starting at +@var{addr}. The region may enclose any number of flash blocks, but +its start and end must fall on block boundaries, as indicated by the +flash block size appearing in the memory map (@pxref{Memory map +format}). @value{GDBN} groups flash memory programming operations +together, and sends a @samp{vFlashDone} request after each group; the +stub is allowed to delay erase operation until the @samp{vFlashDone} +packet is received. + +Reply: +@table @samp +@item OK +for success +@item E @var{NN} +for an error +@end table + +@item vFlashWrite:@var{addr}:@var{XX@dots{}} +@cindex @samp{vFlashWrite} packet +Direct the stub to write data to flash address @var{addr}. The data +is passed in binary form using the same encoding as for the @samp{X} +packet (@pxref{Binary Data}). The memory ranges specified by +@samp{vFlashWrite} packets preceding a @samp{vFlashDone} packet must +not overlap, and must appear in order of increasing addresses +(although @samp{vFlashErase} packets for higher addresses may already +have been received; the ordering is guaranteed only between +@samp{vFlashWrite} packets). If a packet writes to an address that was +neither erased by a preceding @samp{vFlashErase} packet nor by some other +target-specific method, the results are unpredictable. + + +Reply: +@table @samp +@item OK +for success +@item E.memtype +for vFlashWrite addressing non-flash memory +@item E @var{NN} +for an error +@end table + +@item vFlashDone +@cindex @samp{vFlashDone} packet +Indicate to the stub that flash programming operation is finished. +The stub is permitted to delay or batch the effects of a group of +@samp{vFlashErase} and @samp{vFlashWrite} packets until a +@samp{vFlashDone} packet is received. The contents of the affected +regions of flash memory are unpredictable until the @samp{vFlashDone} +request is completed. + @item X @var{addr},@var{length}:@var{XX@dots{}} @anchor{X packet} @cindex @samp{X} packet @@ -23694,6 +23750,11 @@ These are the currently defined stub features and their properties: @tab @samp{-} @tab Yes +@item @samp{qXfer:memory-map:read} +@tab No +@tab @samp{-} +@tab Yes + @end multitable These are the currently defined stub features, in more detail: @@ -23791,6 +23852,7 @@ packets.) @item qXfer:@var{object}:read:@var{annex}:@var{offset},@var{length} @cindex read special object, remote request @cindex @samp{qXfer} packet +@anchor{qXfer read} Read uninterpreted bytes from the target's special data area identified by the keyword @var{object}. Request @var{length} bytes starting at @var{offset} bytes into the data. The content and @@ -23812,6 +23874,17 @@ This packet is not probed by default; the remote stub must request it, by suppling an appropriate @samp{qSupported} response (@pxref{qSupported}). @end table +@table @samp +@item qXfer:memory-map:read::@var{offset},@var{length} +@anchor{qXfer memory map read} +Access the target's @dfn{memory-map}. @xref{Memory map format}. The +annex part of the generic @samp{qXfer} packet must be empty +(@pxref{qXfer read}). + +This packet is not probed by default; the remote stub must request it, +by supplying an appropriate @samp{qSupported} response (@pxref{qSupported}). +@end table + Reply: @table @samp @item m @var{data} @@ -25292,6 +25365,88 @@ host is called: <- @code{T02} @end smallexample +@node Memory map format +@section Memory map format +@cindex memory map format + +To be able to write into flash memory, @value{GDBN} needs to obtain a +memory map from the target. This section describes the format of the +memory map. + +The memory map is obtained using the @samp{qXfer:memory-map:read} +(@pxref{qXfer memory map read}) packet and is an XML document that +lists memory regions. The top-level structure of the document is shown below: + +@smallexample + + + + region... + +@end smallexample + +Each region can be either: + +@itemize + +@item +A region of RAM starting at @var{addr} and extending for @var{length} +bytes from there: + +@smallexample + +@end smallexample + + +@item +A region of read-only memory: + +@smallexample + +@end smallexample + + +@item +A region of flash memory, with erasure blocks @var{blocksize} +bytes in length: + +@smallexample + + @var{blocksize} + +@end smallexample + +@end itemize + +Regions must not overlap. @value{GDBN} assumes that areas of memory not covered +by the memory map are RAM, and uses the ordinary @samp{M} and @samp{X} +packets to write to addresses in such ranges. + +The formal DTD for memory map format is given below: + +@smallexample + + + + + + + + + + + + + + +@end smallexample + @include agentexpr.texi @include gpl.texi -- 2.7.4