From 68049a082b8aedf09e769e61885e000e598bb516 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 25 Jun 2014 10:57:27 -0600 Subject: [PATCH] i2c: tegra: use repeated start for reads I2C read transactions are typically implemented as follows: START(write) address REPEATED_START(read) data... STOP However, Tegra's I2C driver currently implements reads as follows: START(write) address STOP START(read) data... STOP This sequence confuses at least the AS3722 PMIC on the Jetson TK1 board, leading to corrupted read data in some cases. Fix the driver to chain the transactions together using repeated starts to solve this. Signed-off-by: Stephen Warren Reviewed-by: Yen Lin --- arch/arm/include/asm/arch-tegra/tegra_i2c.h | 2 ++ drivers/i2c/tegra_i2c.c | 24 ++++++++++++++++-------- 2 files changed, 18 insertions(+), 8 deletions(-) diff --git a/arch/arm/include/asm/arch-tegra/tegra_i2c.h b/arch/arm/include/asm/arch-tegra/tegra_i2c.h index 853e59b..7ca6907 100644 --- a/arch/arm/include/asm/arch-tegra/tegra_i2c.h +++ b/arch/arm/include/asm/arch-tegra/tegra_i2c.h @@ -124,6 +124,8 @@ struct i2c_ctlr { /* bit fields definitions for IO Packet Header 3 format */ #define PKT_HDR3_READ_MODE_SHIFT 19 #define PKT_HDR3_READ_MODE_MASK (1 << PKT_HDR3_READ_MODE_SHIFT) +#define PKT_HDR3_REPEAT_START_SHIFT 16 +#define PKT_HDR3_REPEAT_START_MASK (1 << PKT_HDR3_REPEAT_START_SHIFT) #define PKT_HDR3_SLAVE_ADDR_SHIFT 0 #define PKT_HDR3_SLAVE_ADDR_MASK (0x3ff << PKT_HDR3_SLAVE_ADDR_SHIFT) diff --git a/drivers/i2c/tegra_i2c.c b/drivers/i2c/tegra_i2c.c index 594e5dd..97f0ca4 100644 --- a/drivers/i2c/tegra_i2c.c +++ b/drivers/i2c/tegra_i2c.c @@ -110,7 +110,8 @@ static void i2c_init_controller(struct i2c_bus *i2c_bus) static void send_packet_headers( struct i2c_bus *i2c_bus, struct i2c_trans_info *trans, - u32 packet_id) + u32 packet_id, + bool end_with_repeated_start) { u32 data; @@ -132,6 +133,8 @@ static void send_packet_headers( /* Enable Read if it is not a write transaction */ if (!(trans->flags & I2C_IS_WRITE)) data |= PKT_HDR3_READ_MODE_MASK; + if (end_with_repeated_start) + data |= PKT_HDR3_REPEAT_START_MASK; /* Write I2C specific header */ writel(data, &i2c_bus->control->tx_fifo); @@ -209,7 +212,8 @@ static int send_recv_packets(struct i2c_bus *i2c_bus, int_status = readl(&control->int_status); writel(int_status, &control->int_status); - send_packet_headers(i2c_bus, trans, 1); + send_packet_headers(i2c_bus, trans, 1, + trans->flags & I2C_USE_REPEATED_START); words = DIV_ROUND_UP(trans->num_bytes, 4); last_bytes = trans->num_bytes & 3; @@ -267,7 +271,7 @@ exit: } static int tegra_i2c_write_data(struct i2c_bus *bus, u32 addr, u8 *data, - u32 len) + u32 len, bool end_with_repeated_start) { int error; struct i2c_trans_info trans_info; @@ -275,6 +279,8 @@ static int tegra_i2c_write_data(struct i2c_bus *bus, u32 addr, u8 *data, trans_info.address = addr; trans_info.buf = data; trans_info.flags = I2C_IS_WRITE; + if (end_with_repeated_start) + trans_info.flags |= I2C_USE_REPEATED_START; trans_info.num_bytes = len; trans_info.is_10bit_address = 0; @@ -463,7 +469,8 @@ static void tegra_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr) } /* i2c write version without the register address */ -int i2c_write_data(struct i2c_bus *bus, uchar chip, uchar *buffer, int len) +int i2c_write_data(struct i2c_bus *bus, uchar chip, uchar *buffer, int len, + bool end_with_repeated_start) { int rc; @@ -475,7 +482,8 @@ int i2c_write_data(struct i2c_bus *bus, uchar chip, uchar *buffer, int len) debug("\n"); /* Shift 7-bit address over for lower-level i2c functions */ - rc = tegra_i2c_write_data(bus, chip << 1, buffer, len); + rc = tegra_i2c_write_data(bus, chip << 1, buffer, len, + end_with_repeated_start); if (rc) debug("i2c_write_data(): rc=%d\n", rc); @@ -516,7 +524,7 @@ static int tegra_i2c_probe(struct i2c_adapter *adap, uchar chip) if (!bus) return 1; reg = 0; - rc = i2c_write_data(bus, chip, ®, 1); + rc = i2c_write_data(bus, chip, ®, 1, false); if (rc) { debug("Error probing 0x%x.\n", chip); return 1; @@ -554,7 +562,7 @@ static int tegra_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr, data[alen - i - 1] = (addr + offset) >> (8 * i); } - if (i2c_write_data(bus, chip, data, alen)) { + if (i2c_write_data(bus, chip, data, alen, true)) { debug("i2c_read: error sending (0x%x)\n", addr); return 1; @@ -591,7 +599,7 @@ static int tegra_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr, for (i = 0; i < alen; i++) data[alen - i - 1] = (addr + offset) >> (8 * i); data[alen] = buffer[offset]; - if (i2c_write_data(bus, chip, data, alen + 1)) { + if (i2c_write_data(bus, chip, data, alen + 1, false)) { debug("i2c_write: error sending (0x%x)\n", addr); return 1; } -- 2.7.4