From 6798f079b0a54caf69e1bde89cf997a2ade38f2e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 19 Dec 2016 01:13:11 +0100 Subject: [PATCH] extcon: axp288: Use vbus-valid instead of -present to determine cable presence [ Upstream commit 5757aca10146061befd168dab37fb0db1ccd8f73 ] The vbus-present bit in the power status register also gets set to 1 when a usb-host cable (id-pin shorted to ground) is plugged in and a 5v boost converter is supplying 5v to the otg usb bus. This causes a "disconnect or unknown or ID event" warning in dmesg as well as the extcon device to report the last detected charger cable type as being connected even though none is connected. This commit switches to checking the vbus-valid bit instead, which is only 1 when both vbus is present and the vbus-path is enabled in the vbus-path control register (the vbus-path gets disabled when a usb-host cable is detected, to avoid the pmic drawing power from the 5v boost converter). Signed-off-by: Hans de Goede Acked-by: Chanwoo Choi Signed-off-by: Chanwoo Choi Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/extcon/extcon-axp288.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c index 42f41e8..27f67c2 100644 --- a/drivers/extcon/extcon-axp288.c +++ b/drivers/extcon/extcon-axp288.c @@ -168,7 +168,7 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) return ret; } - vbus_attach = (pwr_stat & PS_STAT_VBUS_PRESENT); + vbus_attach = (pwr_stat & PS_STAT_VBUS_VALID); if (!vbus_attach) goto notify_otg; -- 2.7.4