From 6629490aa027a8af3160e63cffcddc97c1602c96 Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Wed, 18 Jan 2017 12:02:53 +0530 Subject: [PATCH] arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost Adding fixed voltage regulators for Vbus and Vbus-boost required by USB 3.0 DRD controller on Exynos7-espresso board. Signed-off-by: Vivek Gautam Signed-off-by: Pankaj Dubey Reviewed-by: Javier Martinez Canillas Reviewed-by: Alim Akhtar Signed-off-by: Krzysztof Kozlowski --- arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 45 +++++++++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index 25d9b4a..e5892bb 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -13,6 +13,7 @@ #include "exynos7.dtsi" #include #include +#include / { model = "Samsung Exynos7 Espresso board based on EXYNOS7"; @@ -32,6 +33,29 @@ device_type = "memory"; reg = <0x0 0x40000000 0x0 0xC0000000>; }; + + usb30_vbus_reg: regulator-usb30 { + compatible = "regulator-fixed"; + regulator-name = "VBUS_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gph1 1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb30_vbus_en>; + enable-active-high; + }; + + usb3drd_boost_5v: regulator-usb3drd-boost { + compatible = "regulator-fixed"; + regulator-name = "VUSB_VBUS_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpf4 1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3drd_boost_en>; + enable-active-high; + }; + }; &fin_pll { @@ -365,3 +389,24 @@ vqmmc-supply = <&ldo2_reg>; disable-wp; }; + +&pinctrl_bus1 { + usb30_vbus_en: usb30-vbus-en { + samsung,pins = "gph1-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + usb3drd_boost_en: usb3drd-boost-en { + samsung,pins = "gpf4-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; +}; + +&usbdrd_phy { + vbus-supply = <&usb30_vbus_reg>; + vbus-boost-supply = <&usb3drd_boost_5v>; +}; -- 2.7.4